Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 149 dokumen yang sesuai dengan query
cover
Yusra Yuliana
"Laporan Praktik Keinsinyuran ini membahas PT X mempunyai proyek untuk membantu PT Y mendistribusikan minyak mentah Heavy Oil. PT X berencana mengirimkan seluruh minyak mentah Heavy Oil (HO) dari beberapa Central Gathering Station (CGS) milik PT Y yaitu salah satunya adalah CGS 1 yang ada di Batang, hingga debit aliran sebesar 89.000 BOPD pada pipa minyak PT X segmen 11A yang menuju Tangki Dumai. Juga beberapa Central Gathering Station (CGS) milik PT Y yaitu salah satunya GS III yang ada di Kota Batak, hingga debit aliran sebesar 89.000 BOPD pada pipa minyak PT X segmen 2 yang menuju Stasiun Duri. Crude oil yang akan ditransfer adalah cairan yang mempunyai tingkat viskositas yang tinggi dan sangat abrasive. Hal ini membuat PT X mendesain pompa ulir dengan sekrup ganda dan timing gears. Seleksi pompa ini dilakukan dengan menganalisa datasheet front end engineering design dari PT Y, mengacu pada standard API 676, dan meminta saran serta rekomendasi dari pabrikan. Hasil dari analisa kajian teknis yaitu kapasitas heavy oil yang dialirkan, viskositas dan maksimum ukuran partikel yang terkandung dalam cairan menghasilkan pemilihan jenis pompa twin screw pump dengan timing gears. Hal ini dirasa sudah tepat dengan hasil dari kinerja pompa yang mempunyai efisiensi 91,97% untuk lokasi Batang dan 90,24% untuk lokasi Kota Batak. Kajian profesionalisme dari proyek ini adalah dengan menggunakan standard API 676, kajian etika profesi nya adalah bahwa proyek ini dilakukan oleh insinyur lulusan sarjana teknik dan demi kemaslahatan masyarakat dan kajian K3LL adalah bahwa dengan melakukan penggantian sekrup yang aus secara berkala sesuai dengan rekomendasi produsen.

This Engineering Practice Report discusses that PT X has a project to help PT Y distribute Heavy Oil crude oil. PT Dumai. There are also several Central Gathering Stations (CGS) belonging to PT Y, one of  which is GS III in Batak City, with a flow rate of 89,000 BOPD on the PT The crude oil that will be transferred is a liquid that has a high viscosity level and is very abrasive. This made PT X design a screw pump with double screws and timing gears. Pump selection was carried out by analyzing the front end engineering design datasheet from PT Y, referring to the API 676 standard, and asking for suggestions and recommendations from the manufacturer. The results of the technical study analysis, namely the capacity of the heavy oil to be flowed, the viscosity and the maximum particle size contained in the liquid, resulted in the selection of the type of twin screw pump with timing gears. This is considered appropriate with the results of pump performance which has an efficiency of 91.97% for the Batang location and 90.24% for the Batak City location. The professionalism study of this project is to use the API 676 standard, the professional ethics study is that this project is carried out by engineers with a bachelor's degree in engineering and for the benefit of society and the K3LL study is to replace worn screws periodically in accordance with the manufacturer's recommendations.
"
Depok: Fakultas Teknik Universitas Indonesia, 2024
PR-PDF
UI - Tugas Akhir  Universitas Indonesia Library
cover
Sari Ulfayana
"Laporan Praktik Keinsinyuran tentang kajian teknis pengelolaan dan pembuangan emisi area tambang PT Semen Padang dimaksudkan untuk merumuskan bentuk pengelolaan emisi yang lebih baik dan berkelanjutan, serta memberikan gambaran tentang pentingnya kajian teknis pengelolaan dan pembuangan emisi di area tambang sesuai amanah Peraturan Menteri Lingkungan Hidup dan Kehutanan nomor 5 tahun 2021. Dampak emisi khusunya emisi yang ditimbulkan dari kegiatan penambangan bahan baku semen dikelompokkan menjadi emisi dari kegiatan utama (crusher) berupa beban emisi parikulat dan emisi dari utilitas (genset) berupa beban emisi gas NO2 dan CO. Dari perhitungan neraca massa yang dilakukan emisi yang dihasilkan dari aktifitas crusher untuk parameter TSP sebesar 47.247 kg/tahun dan parameter PM10 sebesar 18.898 kg/tahun. Sedangkan untuk emisi yang bersumber dari penggunaan genset untuk parameter NOx¬ adalah sebesar 151 kg/tahun dan CO sebesar 50 kg/tahun. Sistem pengendali emisi yang digunakan di area penambangan PT Semen Padang yang terpasang berupa bag filter pada crusher dan telah memenuhi standar teknis yang ditetapkan sesuai peraturan yang berlaku. Kegiatan pengelolaan dan pemantauan telah ditetapkan dan dilaksanakan sehingga dapat mengurangi dampak emisi dari kegiatan penambangan yang dibuktikan dengan hasil pengukuran emisi dan udara ambien serta kebisingan masih berada di bawah baku mutu yang ditetapkan. Peran penulis dalam proyek kajian teknis pengelolaan dan pembuangan emisi area tambang PT Semen Padang adalah sebagai koordinator proyek sekaligus tim penyusun dokumen kajian. Kode Etik, Profesionalisme dan Keselamatan, Kesehatan Kerja, Lindungan dan Lingkungan (K3LL) praktik keinsinyuran dalam Kajian teknis pengelolaan dan pembuangan emisi area Tambang PT Semen Padang telah diterapkan sesuai peraturan dan prosedur yang berlaku.

The Engineering Practice Report regarding the technical study of management and disposal of emissions in PT Semen Padang's mining area is intended to formulate a better and more sustainable form of emissions management, as well as providing an overview of the importance of technical studies of management and disposal of emissions in mining areas in accordance with the mandate of Minister of Environment and Forestry Regulation number 5 of 2021. The impact of emissions, especially emissions arising from cement raw material mining activities, is grouped into emissions from the main activity (crusher) in the form of particulate emissions loads and emissions from utility activities (gensets) in the form of NO2 and CO gas emissions loads. From the mass balance calculations, emissions resulting from crusher activities for the TSP parameter are 47,247 kg/year and for the PM10 parameter are 18,898 kg/year. Meanwhile, emissions originating from the use of generators for the NOx¬ parameter are 151 kg/year and CO are 50 kg/year. The emission control system used in the PT Semen Padang mining area is installed in the form of a bag filter on the crusher and meets the technical standards set in accordance with applicable regulations. Management and monitoring activities have been determined and implemented so as to reduce the impact of emissions from mining activities as proven by the results of emissions and ambient air and noise measurements which are still below the specified quality standards. The author's role in the technical study project for the management and disposal of emissions in the PT Semen Padang mining area is as project coordinator as well as the study document preparation team. The Code of Ethics, Professionalism and Safety, Occupational Health, Protection and Environment (K3LL) of engineering practices in the technical study of the management and disposal of emissions in the PT Semen Padang Mining area has been implemented in accordance with applicable regulations and procedures."
Depok: Fakultas Teknik Universitas Indonesia, 2024
PR-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Tulus Sajiwo
"Empat sumur gas lapangan A memproduksi gas dan kondensat, setiap sumur memiliki kemampuan produksi yang berbeda. Optimasi kondensat dilakukan terhadap produksi kepala sumur di WHP dan proses stabilisasi pada unit kondensat stabilizer di FPSO. Perlu dilakukan uji penyaluran gas dan analisis nodal sumur untuk menentukan hubungan laju alir produksi kondensat yang optimum. Kondisi unit pemrosesan kondensat di FPSO juga mengalami perubahan umpan dan penurunan kinerja alat, hal ini perlu dilakukan simulasi optimasi dengan menggunakan perangkat lunak HYSYS versi legal yang diperoleh secara formal. Upaya optimasi produksi harus memperhatikan aspek kesehatan, keselamatan, keamanan dan lingkungan (K3L) kerja terkait bahaya gas beracun H2S dan gas mudah terbakar. Hal ini perlu dilakukan oleh tim yang professional dan tersertifikasi serta ditunjang oleh prosedur operasional yang baku. Uji laboratorium terhadap fluida sumur dan kondensat dilakukan oleh laboratorium yang terakreditasi oleh KAN (Komite Akreditasi Nasional) untuk memenuhi aspek teknis dan etika profesi. Berdasarkan hasil optimasi di area sumur saat ini produksi kondensat di 4469 bpd  dengan produksi sour gas 90 mmscfd. Sumur A1 direkomendasikan untuk di non aktifkan karena tumpukan kondensat (condensate banking). Sumur A2 dibatasi laju aliran gas dengan bukaan choke valve 24% dengan gas flowrate 15 mmscfd dan kondensat 672 bpd. Sumur A3 dengan bukaan choke valve di 47% gas flowrate 40 mmscfd, 2145 bpd kondensat dan sumur A4 dengan bukaan choke valve 50 % gas flowrate 35 mmscfd dan 1652 bpd kondensat.  Terkait optimasi pada unit kondensat stabilisasi dapat disimpulkan bahwa suhu kerja reboiler optimal berada pada suhu 169°C. Pada laju umpan untreated kondensat 4469 bpd, hasil simulasi menghasilkan kondensat sebesar 4226 bpd pada suhu reboiler 169°C dan RVP sebesar 8,2 Psia. Kondisi aktual pabrik saat dilakukan proses dengan suhu reboiler 173°C, laju volume kondensat 4213 bpd, RVP 7,8 Psia. Perbedaan volume kondensat antara simulasi optimasi dan uji coba pabrik adalah 13 bpd, suhu menurun hingga 4°C, RVP sangat mendekati persyaratan pembeli yaitu < 9 Psia pada 7,8.

Gas field A have four wells that produced gas and condensate, each well has a different production capacity.Condensate optimization is carried out on the wellhead area in the WHP and the stabilization process in the Condensate Stabilizer Unit (CSU) in the FPSO. Gas delivery tests and well Nodal Analysis are required to determine the gas and condensate production flow rate relationship. The condition of the condensate processing unit in the FPSO also experienced changes in feed and decreased equipment performance, this needs to be optimized simulation using HYSYS legal software which is obtained formally . Production optimization activities must be followed to Health, Safety, Security and Environment (HSSE) aspects related to the hazards of H2S toxic gas and flammable gas. This shall be performed by professional and certified team and supported by standard operational procedures. Laboratory tests of well fluids and condensates are carried out by laboratories accredited by KAN (National Accreditation Committee) to meet the technical and ethical aspects of the profession. Based on the optimization results in the current well area, condensate production is at 4469 bpd with sour gas production of 90 mmscfd. Well A1 is recommended to be deactivated due to condensate banking. Well A2 is limited to a gas flow rate of 24% with a gas flow rate of 15 mmscfd and 672 bpd of condensate. Well A3 with a choke valve opening of 47% with a gas flow rate of 40 mmscfd, 2145 bpd of condensate and well A4 with a choke valve opening of 50% with a gas flow rate of 35 mmscfd and 1652 bpd of condensate. Regarding the optimization of the condensate stabilization unit, it can be concluded that the optimal reboiler working temperature is at 169°C. At an untreated condensate feed rate of 4469 bpd, the simulation results produce condensate of 4226 bpd at a reboiler temperature of 169°C and an RVP of 8.2 Psia. The actual condition of the plant when the process is carried out with a reboiler temperature of 173°C, a condensate volume rate of 4213 bpd, and an RVP of 7.8 Psia. The difference in condensate volume between the optimization simulation and the plant trial is 13 bpd, the temperature decreases by 4°C, and the RVP is meet to the buyer's requirements of <9 Psia at 7.8. "
Depok: Fakultas Teknik Universitas Indonesia, 2024
PR-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Wanda Gustina Utami
"Laporan Praktik Keinsinyuran ini mengkaji pengelolaan emisi yang dihasilkan oleh Pembangkit Listrik Tenaga Uap (PLTU) di PT X, sesuai dengan amanat Peraturan Menteri Lingkungan Hidup dan Kehutanan Nomor 5 Tahun 2021 tentang Tata Cara Penerbitan Persetujuan Teknis dan Surat Kelayakan Operasional Bidang Pengendalian Pencemaran Lingkungan. Tujuan dari kajian ini adalah untuk mengidentifikasi sumber-sumber emisi, menganalisis karakteristik emisi, mengevaluasi kebijakan dan prosedur pengelolaan emisi, serta menilai penerapan etika profesi insinyur, profesionalisme, dan prinsip Keselamatan, Kesehatan Kerja, dan Lingkungan (K3L) dalam pengelolaan emisi tersebut. PT SUCOFINDO, sebagai perusahaan jasa Testing, Inspection, and Certification, berperan sebagai penyusun dokumen kajian teknis pengelolaan emisi di PT X. Penulis laporan ini berperan sebagai ketua tim dalam proyek tersebut. Hasil identifikasi menunjukkan bahwa emisi utama berasal dari pembakaran batubara untuk boiler dan pembakaran solar untuk genset. Karakteristik emisi yang terdeteksi mencakup partikulat, sulfur dioksida (SO2), nitrogen oksida (NOx), serta sejumlah kecil zat berbahaya lainnya seperti asam klorida (HCl), klorin bebas (Cl2), amonia (NH3), dan merkuri (Hg), yang dapat berpotensi mempengaruhi kualitas udara sekitar. Evaluasi kebijakan pengelolaan emisi di PT X telah memenuhi standar teknis yang ditetapkan sesuai peraturan yang berlaku. Begitu juga dengan penerapan etika profesi, profesionalisme, serta prinsip K3L telah dilaksanakan dengan baik dan sesuai dengan peraturan yang berlaku.

This Engineering Practice Report examines the emission management produced by the Steam Power Plant (PLTU) at PT X, in accordance with the mandate of the Ministry of Environment and Forestry Regulation Number 5 of 2021 regarding the Procedure for Issuance of Technical Approval and Operational Feasibility Letter in the Field of Environmental Pollution Control. The objective of this study is to identify the sources of emissions, analyze the characteristics of the emissions, evaluate the policies and procedures for emission management, and assess the application of engineering ethics, professionalism, and the principles of Occupational Health, Safety, and Environment (K3L) in the emission management process. PT SUCOFINDO, as a Testing, Inspection, and Certification service company, plays a role as the technical study document preparer for emission management at PT X. The author of this report serves as the team leader for this project. The identification results show that the main emissions come from coal combustion for the boiler and diesel combustion for the generator set. The detected emission characteristics include particulates, sulfur dioxide (SO2), nitrogen oxides (NOx), as well as small amounts of other hazardous substances such as hydrochloric acid (HCl), free chlorine (Cl2), ammonia (NH3), and mercury (Hg), which can potentially affect the surrounding air quality. The evaluation of emission management policies at PT X meets the technical standards set in accordance with the applicable regulations. Likewise, the implementation of engineering ethics, professionalism, and K3L principles has been carried out well and in compliance with the relevant regulations."
Depok: Fakultas Teknik Universitas Indonesia, 2024
PR-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Ali Zaenal Abidin
"Industri minyak dan gas merupakan salah satu industri dengan tingkat risiko tinggi bagi pekerja dan masyarakat sekitar. Hal ini disebabkan oleh sifat dari produk yang dihasilkan, yaitu hidrokarbon (gas dan cair), termasuk ke dalam kategori zat yang mudah terbakar. Salah satu upaya untuk memahami tingkat risiko bekerja di fasilitas migas adalah dengan menggunakan metode kuantitatif atau yang sering disebut dengan QRA (Quantitative Risk Assessment). QRA yang dilakukan di ORF (Onshore Receiving Facility) bertujuan untuk memahami perubahan risiko terhadap pekerja di ORF dikarenakan adanya modifikasi dan penambahan sistem perpipaan Lean Gas untuk keperluan komersial. Selain itu, modifikasi sistem perpipaan juga dilakukan di KM 21.65. Hasil studi QRA untuk ORF dan KM 21.65 menunjukkan bahwa paparan risiko tertinggi berasal dari proses hidrokarbon untuk kelompok pekerja Field Operator, Assistance Operator, dan Turnaround Staff dengan IRPA berada di angka 4.24E-05/tahun dikarenakan tingkat kehadiran yang tinggi di area proses, dengan kontribusi risiko mencapai 54%. Selain itu, area ORF dan KM 21.65 telah memenuhi kriteria LSIR dengan tidak melebihi 1.00E-05/tahun dan 1.00E-06/tahun untuk area di luar pagar batas ORF dan KM 21.65. Societal Risk di ORF dan KM 21.65 berada di area ALARP dan memenuhi kriteria perusahaan. Hasil studi ini juga telah melalui proses validasi, baik untuk data input dan hasil perhitungan, yang dilakukan oleh gabungan tim dari Operations, Project Development – Facilitites Engineering, Maintenance, Asset Integrity dan HSEQ – Pocess Safety. Sebagai tambahan, studi ini telah dilakukan dengan mempertimbangkan Aspek K3LL, Kode Etik Keinsinyuran dan Profesionalisme.

The oil and gas industry is an industry with a high level of risk for workers and the surrounding community. This is due to the nature of the products produced, namely hydrocarbons (gas and liquid), which are included in the category of flammable substances. One effort to understand the level of risk of working in oil and gas facilities is to use quantitative methods or what is often called QRA (Quantitative Risk Assessment). The QRA carried out at ORF (Onshore Receiving Facility) aims to understand changes in risk to workers at ORF due to modifications and additions to the Lean Gas piping system for commercial purposes. Apart from that, modifications to the piping system were also carried out at KM 21.65. The results of the QRA study for ORF and KM 21.65 show that the highest risk exposure comes from the hydrocarbon process for the Field Operator, Assistance Operator and Turnaround Staff worker groups with IRPA at 4.24E-05/year due to the high level of presence in the process area, with risk contribution reached 54%. In addition, the ORF and KM 21.65 areas have met the LSIR criteria by not exceeding 1.00E-05/year and 1.00E-06/year for areas outside the ORF and KM 21.65 boundary fences. Societal Risk at ORF and KM 21.65 is in the ALARP area and meets the company's criteria. The findings of this study have undergone a validation process for both input data and calculation results, conducted by a collaborative team from Operations, Project Development – Facilities Engineering, Maintenance, Asset Integrity, and HSEQ – Process Safety. Additionally, this study has been conducted with consideration for HSE (Health, Safety, Environment, and Loss Prevention) aspects, Engineering Code of Ethics, and Professionalism."
Depok: Fakultas Teknik Universitas Indonesia, 2023
PR-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Latif Alfansyah
"Hidrogen merupakan senyawa penting yang digunakan pada kilang minyak bumi terutama untuk menghasilkan produk dengan pengotor yang rendah dan kestabilan yang bagus. Hidrogen umumnya diproduksi oleh hydrogen plant melalui jalur steam reforming – shift converter – CO2 removal. Pada Major Turn Around (TA) yang dilakukan setiap 5 (lima) tahun sekali, penulis diberikan tugas oleh General Manager suatu kilang untuk menjadi Leader pada proyek ini, yang bertanggungjawab dalam proses penggantian katalis di unit Hydrogen Plant. Perbedaan material dan karakteristik pada tiap katalis, serta perbedaan desain reaktor menjadi tantangan tersendiri dalam melaksanakan penggantian katalis. Meskipun demikian, laporan ini berfokus pada upaya perbaikan proses reduksi katalis Low Temperature Shift Converter (LTSC) supaya memperoleh proses reduksi yang stabil dan minim gangguan. Beberapa kendala berdasarkan pengalaman pada proses reduksi sebelumnya berhasil diidentifikasi dan menghasilkan beberapa alternatif solusi antara lain: (a) once-through menggunakan gas alam, (b) recycle menggunakan nitrogen dan dedicated facility, serta (c) recycle menggunakan hidrogen eksternal sebagai gas pereduksi. Alternatif solusi (c) dipilih berdasarkan aspek efektivitas, biaya, dan dampak lingkungan. Penggunaan hidrogen eksternal berhasil memperbaiki proses reduksi menjadi lebih stabil dan minim gangguan yang dapat dilihat dari profil temperatur bed katalis dan tidak terjadinya temperature runaway. Selain itu, durasi reduksi dapat dipangkas dari sebelumnya 6 hari menjadi 3 hari. Dalam menjalankan praktik keinsinyuran tersebut, penulis berpedoman pada peraturan perusahaan antara lain: Tata Kerja Organisasi Penyusunan Hazard Identification & Risk Assessment (No. B07-012), Pedoman pemilihan jenis dan pengadaan katalis untuk kilang (No. A-002), Tata Kerja Penggunaan Alat untuk pelaksanaan unloading dan loading katalis LTSC (No. D04-31), dan Tata Kerja Penggunaan Alat untuk pelaksanaan reduksi katalis LTSC (No. D04-027).

Hydrogen is an important substance used in petroleum refineries, especially to produce products with low impurities and good stability. Hydrogen is generally produced by hydrogen plants through steam reforming – shift converter – CO2 removal pathways. On the Major Turn Around (TA) which is carried out every 5 (five) years, the author is given the task by General Manager of a refinery to become Leader of this project which is responsible for the catalyst replacement process in Hydrogen Plant unit. Differences in materials and characteristics of each catalyst, as well as differences in reactor design, become challenges in implementing catalyst replacement. However, this report focuses on efforts to improve the Low Temperature Shift Converter (LTSC) catalyst reduction process, in order to obtain a stable reduction process with minimal disruption. Several obstacles based on experience in previous reduction processes were identified and resulted in several alternative solutions, including: (a) once-through using natural gas, (b) recycling using nitrogen and a dedicated facility, and (c) recycling using external hydrogen as a reducing gas. Alternative solution (c) is selected based on aspects of effectiveness, cost, and environmental impact. The use of external hydrogen succeeded in improving the reduction process to be more stable and with minimal disturbance which can be seen from the temperature profile of the catalyst bed and the absence of temperature runaway. In addition, the reduction duration can be cut from the previous 6 days to 3 days. The author is guided by company regulations in carrying out these engineering practices, including: Work Procedures for preparation of hazard identification & risk assessment (No. B07-012), Guidelines for selecting the type and procurement of catalysts for refineries (No. A-002), Work Procedures for carrying out unloading and loading of LTSC catalysts (No. D04-31), and Procedure for carrying out LTSC catalyst reduction (No. D04-027)."
Depok: Fakultas Teknik Universitas Indonesia, 2023
PR-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Akhmad Hidayatno
"Dalam memenuhi komitmen penurunan gas rumah kaca secara nasional yang dikenal sebagai Intended Nationally Determined Contributions (INDCs) sebanyak 29% (tanpa bantuan) dan 41% (dengan bantuan luar negeri) di tahun 2030, Pemerintah Indonesia menggunakan sebuah model komputer berbasis pendekatan sistem dinamis untuk menyimulasikan kontribusi sektoral terhadap perkembangan pembangunan rendah karbon di Indonesia. Model ini merupakan upaya untuk menjadikan pembangunan yang menghasilkan emisi karbon yang rendah di Indonesia menjadi arus utama pembangunan di Indonesia. Model yang berupa model multi-sektoral yang kompleks dengan menggunakan pendekatan sistem dinamis. Untuk memberikan evaluasi teknis akademik terhadap model ini sekaligus untuk melakukan penajaman apakah model mampu memenuhi kebutuhan perencanaan nasional, maka serangkaian analisis model, lokakarya, pelatihan dan diskusi dilakukan untuk beberapa keluaran. Pertama, menghasilkan kerangka kerja analisis yang mencakup berbagai elemen penting dalam proses validasi model dalam pendekatan pemodelan sistem dinamis. Kedua, Evaluasi model berdasarkan kerangka ini menghasilkan beberapa rekomendasi untuk memperjelas struktur endogen model serta mempertimbangkan untuk menyederhanakan model untuk memudahkan penyebarluasan model. Ketiga, berupa rancangan dan pelaksanaan uji coba lokakarya untuk mengajarkan konsep pengambilan keputusan berbasis model.

In order to fulfill the commitment to reducing greenhouse gas emissions as stated in the Intended Nationally Determined Contributions (INDCs) by 29% (without international support) and 41% (with international support) in 2030, the Government of Indonesia developed a system dynamics model to simulate each development sectors contribution to this target. The model is part of mainstreaming efforts to use low-carbon development initiatives in Indonesia, especially for planning and evaluation. It consists of complex multi-sectoral submodules using the system dynamics approach. Therefore, to increase its acceptance, the model needs to be technically validated. Through desk analysis, interviews, workshops, and discussions, the final deliverables included frameworks for analysis, model analysis results, and workshop design to introduce the model to the public. The framework of analysis is based on the principles of validation used by the systems dynamics approach. Model evaluation results show several recommendations to increase the endogeneity aspects of the model and develop a simpler model for knowledge transfer. The workshop design and prototyping were conducted to introduce the concept of model-based decision-making."
Depok: Fakultas Teknik Universitas Indonesia, 2022
PR-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Erlinda Muslim
"Sebelum berlakunya UU No. 22 Tahun 2001 tentang Minyak dan Gas Bumi, eksplorasi dan produksi minyak dan gas bumi di Indonesia adalah didasarkan pada Kontrak Bagi Hasil (PSC- Profit Sharing Contract). Setelah berlakunya UU No. 22 Tahun 2001 tentang Minyak dan Gas Bumi, merubah PSC menjadi Kontrak Kerjasama (KKKS). Undang-Undang ini sekaligus mengalihkan pengelolaan kontrak dengan perusahaan pertambangan dari Pertamina kepada Badan Pelaksana Kegiatan Hulu Minyak dan Gas Bumi (BPMIGAS). Menurut ketentuan Pasal 44 ayat (3) huruf g Undang-undang Nomor : 22 Tahun 2001 tersebut dan ketentuan Pasal 11 huruf g Peraturan Pemerintah Nomor : 42 Tahun 2002, BPMIGAS bertugas untuk menunjuk Penjual Gas Bumi bagian Negara, termasuk dalam hal ini Liquified Natural Gas (LNG) yang merupakan ekstraksi dari Gas Bumi. Tujuan pekerjaan ini adalah menilai dan melakukan komparasi secara obyektif mengenai kemampuan teknis dari calon Penjual LNG Bagian Negara dalam berbagai aspek terkait kegiatan penjualan LNG dan memberikan rekomendasi calon penjual LNG Bagian Negara kepada BPMIGAS untuk ditunjuk sebagai Penjual LNG Bagian Negara yang dapat memberikan manfaat dan penerimaan yang maksimal bagi negara untuk kemakmuran rakyat. Rekomendasi yang akan diajukan sebagai hasil dari studi teknis ini adalah penilaian kualifikasi dari calon penjual LNG yang meliputi Pertamina sebagai perwakilan dari BUMN, perwakilan dari KKKS, dan Badan Usaha lain Metode yang digunakan dalam kajian ini diawali dengan penentuan Critical Success Factor (CSF) dengan Focus Group Discussion (FGD), kemudian menentukan bobot variabelnya dengan Analytical Hierarchy Process (AHP) yang digunakan untuk perhitungan Competitive Profile Matrix (CPM) dan dilanjutkan dengan Risk Analysis. Berdasarkan hasil analisis yang didapatkan dari CPM, menunjukkan bahwa perusahaan Pertamina memiliki posisi yang lebih menguntungkan dengan nilai total CPM adalah 3,2885 dibandingkan dengan posisi perusahaan saingannya yang mewakili KKKS (BP) dengan jumlah nilai total bedasarkan CPM adalah 2,9885, dengan pro-kontra resiko dan dampak resiko masing-masing. Dari hasil kajian ini berdasarkan UU Migas No 22/2001, maka BPMIGAS memiliki wewenang untuk memutuskan penunjukan penjual LNG bagian negara.

Prior to the enactment of Law No. 22 of 2001 concerning Oil and Gas, exploration and production of oil and gas in Indonesia is based on Production Sharing Contracts (PSC-Profit Sharing Contract). After the enactment of Law No. 22 of 2001 concerning Oil and Gas, changed the PSC to a Cooperation Contract (KKKS). This law also transfers the management of contracts with mining companies from Pertamina to the Executive Agency for Upstream Oil and Gas Activities (BPMIGAS). According to the provisions of Article 44 paragraph (3) letter g of Law Number: 22 of 2001 and the provisions of Article 11 letter g of Government Regulation Number: 42 of 2002, BPMIGAS is tasked with appointing the Seller of Natural Gas for the State's share, including in this case Liquified Natural Gas (LNG) which is the extraction of Natural Gas. The purpose of this work is to objectively assess and carry out a comparison regarding the technical capabilities of the prospective State Share LNG Seller in various aspects related to LNG sales activities and provide recommendations for the State Share LNG prospective seller to BPMIGAS to be appointed as a State Share LNG Seller who can provide benefits and revenues that are for the country for the prosperity of the people. Recommendations that will be put forward as a result of this technical study are an assessment of the qualifications of LNG seller candidates which include Pertamina as a representative from KKKS, representatives from PSC Contractors, and other business entities. The method used in this study begins with determining the Critical Success Factor (CSF) with a Focus Group Discussion (FGD), then determines the weight factor of the variable using the Analytical Hierarchy Process (AHP) which is used to calculate the Competitive Profile Matrix (CPM) and continues with Risk Analysis. Based on the results of the analysis obtained from the CPM, it shows that the Pertamina company has a more profitable position with a total CPM value of 3.2885 compared to the position of its rival companies representing PSC Contractors (BP) with a total value based on CPM of 2.9885, with pro- cons of risk and the impact of each risk. From the results of this study based on the Oil and Gas Law No. 22/2001, BPMIGAS has the authority to decide on the appointment of sellers of the state's share of LNG."
Depok: Fakultas Teknik Universitas Indonesia, 2022
PR-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Petrus Mursanto
"Untuk mendukung lingkungan berkelanjutan, dibangunlah sebuah prototipe sistem cerdas yang mengatur arus lalu lintas berdasarkan potensi tingkat polusi yang ditimbulkan oleh kendaraaan bermotor. Dengan pengaturan cerdas ini diupayakan pengaturan arus lalu lintas yang efisien dengan meminimalisir tingkat polusi CO2 di perempatan-perempatan jalan yang diatur oleh lampu lalu-lintas (traffic light). Hasilnya adalah sebuah prototipe simulator yang dapat menjadi model implementasi sistem cerdas untuk diadaptasikan ke berbagai daerah dengan variasi layout perempatan dan tingkat kepadatan arus lalu-lintas yang berbeda-beda. Implementasi sistem lalu lintas cerdas tersebut dikaji dalam laporan praktik keinsinyuran ini berkaitan dengan profesionalisme yang dipetakan ke dalam bakuan kompetensi PII. Selain itu juga dilakukan kajian terhadap kode etik dan etika insinyur profesional serta kepatuhannya pada aspek keselamatan kesehatan kerja dan lingkungan (K3L). Praktik keinsinyuran yang dilaporkan adalah dalam rangka mendukung kesehatan lingkungan dengan tingkat polusi yang terkendali, sambil meningkatkan kenyamanan berkendara dengan memperlancar arus lalu-lintas. Penerapan teknologi, pengambilan data dan pemanfaatan informasi berdasarkan rekaman CCTV juga telah memenuhi kode etik dan etika profesi insinyur sebagaimana ditentukan dalam peraturan yang berlaku serta selaras dengan Code of Conducts dari Asosiation for Computing Machinery (ACM).

In accordance to provide a sustainable environment, this report proposes an intelligent system that is enabled to regulate traffic flow based on the level of pollution generated by motorized vehicles. By having such smart arrangement, efforts are made to manage an efficient traffic flow by minimizing CO2 pollution levels at traffic-lights-controlled crossroads. The result is a prototype simulator that can be a model for implementing an intelligent system adaptable to various areas with variations in intersection layouts and different levels of traffic density. The implementation of the intelligent traffic system has been examined based on the professionalism standard owned by the Instituion of Engineer Indonesia (PII). In addition, a study was also carried out on the code of ethics and ethics of professional engineers and their compliance with the aspects of occupational health and environmental safety (K3L). The reported engineering practice is to support environmental health with controlled pollution levels, while increasing driving comfort by smoothing traffic flow. The application of technology, data collection and utilization of information based on CCTV recordings also complies with the engineering code of ethics and professional ethics as stipulated in applicable regulations and in line with the Code of Conducts of the Association for Computing Machinery (ACM)."
Depok: Fakultas Teknik Universitas Indonesia, 2022
PR-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Zhofran Bintang Chairuddin
"ABSTRACT
Terbatasnya sumber daya dan cadangan minyak serta kemampuan kilang untuk eksplorasi, menyebabkan kondisi sumber energi Indonesia sampai saat ini masih bergantung dengan penyediaan minyak. Perpres (Perpres No 5 tahun 2006) mewujudkan adanya optimalisasi penyediaan bahan bakar dengan berbasis energi baru terbarukan (EBT) dimana diantaranya meningkatkan penggunaan bahan bakar energi nabati (biofuel) yaitu biodiesel dan bioetanol. Katalis heterogen yang digunakan adalah penukar ion yang dapat digunakan dalam menghasilkan biodiesel yang fasanya padat sehingga pemisahannya lebih mudah dan dapat dipakai berulang. Model Kinetika dari reaksi tersebut ditentukan dengan fitting data menggunakan Microsoft excel. Dari simulasi tersebut didapatkan parameter kinetik dan hasilnya akan dibandingkan dengan data eksperimen sehingga dapat diketahui akurasi dari model tersebut.

ABSTRACT
Limited resources and reserves and the ability of refineries to oil exploration, causing the condition of Indonesian energy source is still dependent on the supply of oil. Presidential Decree (Presidential Decree No. 5 of 2006) to realize the optimization of the provision of fuels with renewable energy-based (EBT) which include increasing the use of bio energy fuels (biofuels) are biodiesel and bioethanol. Making biodiesel using alkaline catalysts, acid catalysts, biocatalysts, supercritical methanol is very inefficient due to biodiesel production costs are very high, it is not environmentally friendly because most of the catalyst discharged into the environment and are difficult to be separated from their liquid products.Ion exchangers that are already saturated can be reactivated and repeated use . The study will be conducted by curve fitting using microsoft excel."
2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>