Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 3 dokumen yang sesuai dengan query
cover
Sarah
Abstrak :
Pekerja industri cat dan pelapis berisiko tinggi terhadap terjadinya gangguan otot rangka. Gangguan otot rangka dapat mempengaruhi produktivitas, absensi, kompensasi dan kualitas kerja pekerja. Tujuan penelitian adalah menganalisis hubungan faktor risiko fisik, individu, dan psikososial terhadap gejala gangguan otot rangka pada pekerja. Penelitian dilaksanakan pada bulan Maret-Juni 2020 pada 72 pekerja di PT X. Penelitian ini menggunakan desain cross sectional dengan lembar QEC, kombinasi kuesioner psikososial, dan Nordic Musculoskeletal Questionnaire (NMQ). Hasil penelitian menunjukkan terdapat hubungan yang signifikan antara faktor risiko individu yaitu status merokok dengan gejala gangguan otot rangka pada leher dan jenis pekerjaan dengan gejala gangguan otot rangka pada bahu dan punggung bawah. Hasil penelitian pada faktor risiko fisik ditemukan hubungan yang signifikan pada faktor risiko sangat tinggi dengan gejala gangguan otot rangka pada leher, bahu, dan punggung bawah. Pada faktor risiko psikososial ditemukan hubungan yang signifikan pada tuntutan kerja dengan gejala gangguan otot rangka pada leher dan bahu, kepuasan kerja dengan gangguan otot rangka pada punggung bawah, dan stress kerja dengan gejala gangguan otot rangka pada leher, bahu, dan punggung bawah. Oleh karena itu, diperlukan pengendalian dan intervensi lebih lanjut untuk mengurangi risiko yang diterima pekerja. ...... Painting and coating industry workers were at high risk for musculoskeletal disorders. Musculoskeletal disorders can affect productivity, absenteeism, compensation and work quality of workers. The aim of this study was to analyze the correlation of physical, individual, and psychosocial risk factors against musculoskeletal disorders symptoms in workers. This research was conducted on March till June 2020, involving 72 workers at PT X. This study used a cross sectional design with QEC assessment, the combination of psychosocial questionnaire, and Nordic Musculoskeletal Questionnaire (NMQ). The result of this study on individual factors showed that there were significant associations between smoking status with musculoskeletal disorder symptoms of the neck and type of work with musculoskeletal disorder symptoms of the shoulder and low back. The result of this study on physical factors showed that there were significant associations between very high level of physical risk with symptoms of musculoskeletal disorders on the neck, shoulder, and low back. The result of this study on psychosocial factors showed that there were significant associations between work demand with musculoskeletal disorder symptoms of the neck and shoulder, job satisfaction with musculoskeletal disorder symptoms of the low back, and work stress with musculoskeletal disorder symptoms of the neck, shoulder, and low back. Therefore, further controls and interventions are needed to reduce the risks that workers receive.
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Hesti Febyandini Lestari
Abstrak :
Toluene merupakan bahan kimia mudah terbakar dan beracun yang berfungsi sebagai solvent dalam produksi cat. Skripsi ini merupakan penelitian deskriptif dengan pendekatan semi kuantitatif menggunakan data sekunder perusahaan, literature serta observasi secara langsung yang kemudian di analisis menggunakan perangkat lunak Areal Location Hazardous Atmosphere (ALOHA). Tujuan dari penelitian ini adalah mengetahui konsekuensi yang terjadi berdasarkan jangakauan disperi uap toluene terhadap potensi keracunan, kebakaran, ledakan dan populasi berisiko terpajan dari skenario kebocoran tangki toluene yang sudah dirancang yakni dengan 4 jenis skenario cuaca pada kondisi overcast tinggi dan rendah serta kondisi cerah tinggi dan rendah. Hasil penelitian ini didapatkan dispersi uap beracun dan mudah dengan area jangkauan dispersi paling luas berasal dari skenario worst case (rupture crevice dan tidak terkendali) pada kondisi cuaca cerah dengan kecepatan angin dan suhu yang rendah pada gasket berukuran 4 inch yang dispersinya mencapai 438 meter yang mencakup seluruh wilayah Kawasan industri hingga pemukiman dan jalan raya publik, dan dispersi uap mudah terbakar dispersinya mencapai 69 meter yang mencakup hampir seluruh area PT. Inkote Indonesia. Sedangkan area konsekuensi radiasi termal paling luas berasal dari skenario worst case (rupture crevice dan tidak terkendali) pada kondisi cuaca mendung dengan kecepatan angin tinggi dan suhu yang rendah pada gasket berukuran 4 inch yang dispersinya mencapai 51 meter. ......Toluene is a toxic dan flammable chemical liquid that used as a solvent for paint production. This thesis is a descriptive study with a semi-quantitative approach using secondary data from the company, literature and field observations. Then, these data are analyzed using the software Areal Location of Hazardous Atmosphere (ALOHA). The purpose of this study was to determine the consequence that occur based on the range of toluene dispersion that potential for toxication, flammable, explosion and population at risk to exposed of leakage scenarios that have been designed with 4 atmosfer condition scenarios (overcast and sunny condition). The results of this study found the widest threat zone of toxic and flammable vapor from the worst case scenario (crevice rupture and uncontrolled) in sunny weather conditions with low of wind speed and temperature in a 4 inches gasket, the dispersion of toxic vapor within 438 m reached the industry area, people living in the surrounding of industry area and public roads, and for the dispersion of flammable vapor within 69 meters reached almost the entire area of PT. Inkote Indonesia. Besides that, for the thermal radiation widest threat zone comes from the worst case scenario (crevice rupture and uncontrolled) in overcast weather conditions with high wind speed and low temperature in a 4 inches gasket within 51 meters reached almost entire area of PT. Inkote Indonesia.
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
I Made Ivan Surya Sanjaya
Abstrak :
Dalam ketatnya persaingan dalam industri cat domestik, perusahaan dituntut untuk mengejar perbaikan dalam segala aspek, termasuk efisiensi operasional. Peningkatan efisiensi produksi melalui pengurangan pemborosan merupakan salah satu solusi untuk meningkatkan efisiensi perusahaan secara keseluruhan. Penelitian ini bertujuan untuk meningkatkan efisiensi proses produksi cat waterbased di PT X melalui identifikasi dan eliminasi pemborosan. Metode Value Stream Mapping (VSM), Waste Assessment Model (WAM), dan Process Activity Mapping (PAM) diterapkan untuk mencapai tujuan tersebut. Ditemukan bahwa overproduction, inventory, dan defect merupakan jenis pemborosan yang paling dominan dalam current state proses produksi. Berdasarkan analisis bersama pihak perusahaan, rekomendasi perbaikan yang dirumuskan dengan metode 5W-1H berupa penggunaan kemasan jumbo untuk bahan tertentu, penerapan metode organisasi 5S, perubahan layout pada floor produksi atas, penerapan papan Kanban di area forklift, perubahan pada bon resmi permintaan RM, dan penerapan pergantian peran dalam proses filling. Alhasil, pada future state, value ratio meningkat 1,7%, cycle time berkurang 6,56%, standard time berkurang 7,25%, lead time berkurang 6,55%, waktu kegiatan value adding berkurang 3,06%, waktu kegiatan non-value adding berkurang 13,82%, dan waktu kegiatan necessary nonvalue adding berkurang 3,64%. ......As the competition in the domestic paint industry intensifies, companies are required to pursue improvements in all aspects. Increasing production efficiency through waste reduction is one of the possible ways to improve a company’s overall operational efficiency. This study aims to improve the efficiency of water-based paint production process at PT X through the elimination of waste. Value Stream Mapping, Waste Assessment Model, and Process Activity Mapping are applied to achieve this goal. Based on a joint analysis with the company, the recommendations for improvement formulated using the 5W-1H method include the use of jumbo packaging for certain materials, the application of the 5S organizational method, changes to the layout on the upper production floor, the application of Kanban boards in the forklift area, changes to the official receipt for RM requests, and role shuffling in the filling process. As a result, in the future state, the value ratio increased by 1.7%, cycle time decreased by 6.56%, standard time decreased by 7.25%, lead time decreased by 6.55%, value added activity time decreased by 3.06%, non-value adding activity time is reduced by 13.82%, and necessary but non-value adding activity time is reduced by 3.64%.
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library