Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 7 dokumen yang sesuai dengan query
cover
Dzil Mulki Heditama
Abstrak :
[ABSTRAK
Penentuan zona rekahan reservoar di daerah Geotermal sangat penting untuk keperluan penentuan titik pemboran. Penentuan zona rekahan tersebut dapat dilakukan dengan menerapkan metode geofisika, salah satunya adalah metode microearthquake (MEQ). Metode MEQ dapat memberikan informasi yang berkaitan dengan struktur permeabilitas reservoar, pola pergerakan fluida injeksi, dan batas reservoar pada lapangan Geotermal. Terdapat beberapa metode penting yang dilakukan untuk analisis zona rekahan dari data MEQ, yaitu relokasi menggunakan metode double difference, tensor momen dan tomografi. Dalam hal ini penulis berupaya untuk melakukan penelitian pengembangan software terkait penentuan waktu tiba menggunakan spektrogram. Setelah lokasi hiposenter diperoleh, maka langkah berikutnya adalah melakukan analisis tensor momen dan tomografi. Dari berbagai analisis yang dilakukan tersebut, penentuan zona rekahan di daerah Geotermal dapat dilakukan dengan baik. Diharapkan penelitian ini memberikan hasil yang terbaik sehingga metode yang dilakukan tersebut dapat diterapkan dalam penentuan zona rekahan yang lebih tepat.
ABSTRACT
Determination of the reservoir fracture zone in Geothermal areas are very important for the purposes of determining the drilling point. Determination of the fracture zone can be performed by applying geophysical methods, one of which is a microearthquake (MEQ) method. MEQ method may provide information relating to the structure of the reservoir permeability, patterns of fluid injection movement, and boundary the field of Geothermal reservoir. There are several important methods to analyze fracture zone performed on the data MEQ, relocation using the double difference method, moment tensor and tomography. In this case the author seeks to conduct research related to the development of software such methods can be used to process and analyze the MEQ data. In this case I do research related to software development related to the timing of arrival using the spectrogram. After the location of the hypocenter is obtained, then the next step is to analyze the moment tensor and tomography. From the various analyzes performed, the determination of the fracture zone in the Geothermal area can be done well. It is expected that this study provides the best results so the methods can applied in the determination of a more precise fracture zone.;Determination of the reservoir fracture zone in Geothermal areas are very important for the purposes of determining the drilling point. Determination of the fracture zone can be performed by applying geophysical methods, one of which is a microearthquake (MEQ) method. MEQ method may provide information relating to the structure of the reservoir permeability, patterns of fluid injection movement, and boundary the field of Geothermal reservoir. There are several important methods to analyze fracture zone performed on the data MEQ, relocation using the double difference method, moment tensor and tomography. In this case the author seeks to conduct research related to the development of software such methods can be used to process and analyze the MEQ data. In this case I do research related to software development related to the timing of arrival using the spectrogram. After the location of the hypocenter is obtained, then the next step is to analyze the moment tensor and tomography. From the various analyzes performed, the determination of the fracture zone in the Geothermal area can be done well. It is expected that this study provides the best results so the methods can applied in the determination of a more precise fracture zone.;Determination of the reservoir fracture zone in Geothermal areas are very important for the purposes of determining the drilling point. Determination of the fracture zone can be performed by applying geophysical methods, one of which is a microearthquake (MEQ) method. MEQ method may provide information relating to the structure of the reservoir permeability, patterns of fluid injection movement, and boundary the field of Geothermal reservoir. There are several important methods to analyze fracture zone performed on the data MEQ, relocation using the double difference method, moment tensor and tomography. In this case the author seeks to conduct research related to the development of software such methods can be used to process and analyze the MEQ data. In this case I do research related to software development related to the timing of arrival using the spectrogram. After the location of the hypocenter is obtained, then the next step is to analyze the moment tensor and tomography. From the various analyzes performed, the determination of the fracture zone in the Geothermal area can be done well. It is expected that this study provides the best results so the methods can applied in the determination of a more precise fracture zone., Determination of the reservoir fracture zone in Geothermal areas are very important for the purposes of determining the drilling point. Determination of the fracture zone can be performed by applying geophysical methods, one of which is a microearthquake (MEQ) method. MEQ method may provide information relating to the structure of the reservoir permeability, patterns of fluid injection movement, and boundary the field of Geothermal reservoir. There are several important methods to analyze fracture zone performed on the data MEQ, relocation using the double difference method, moment tensor and tomography. In this case the author seeks to conduct research related to the development of software such methods can be used to process and analyze the MEQ data. In this case I do research related to software development related to the timing of arrival using the spectrogram. After the location of the hypocenter is obtained, then the next step is to analyze the moment tensor and tomography. From the various analyzes performed, the determination of the fracture zone in the Geothermal area can be done well. It is expected that this study provides the best results so the methods can applied in the determination of a more precise fracture zone.]
Jakarta: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2014
T43256
UI - Tesis Membership  Universitas Indonesia Library
cover
Wiyono
Abstrak :
Shale hidrokarbon masih menjadi salah satu topik hangat dalam industri perminyakan. Indonesia memiliki potensi shale gas yang cukup besar yaitu sekitar 574 TCF. Pemerintah bersama investor sedang memulai pengusahaan shale hidrokarbon. Parameter-parameter geokimia dan geomekanik merupakan aspek penting dalam eksplorasi potensi shale hidrokarbon dan memberikan informasi penting dalam rangka optimasi produksi. Namun demikian, masih cukup terbatas penelitian-penelitian terkait hubungan parameter-parameter petrofisik untuk shale hidrokarbon. Area penelitian berada pada bagian tepi selatan cekungan Sumatera Utara. Formasi Baong dipercaya sebagai target pengusahaan shale hidrokarbon dengan dominan litologi adalah shale. Formasi Baong berada pada kisaran kedalaman 1.465 ndash;3.224 m dengan mudstone tebal, didominasi oleh calcareous shale berwarna abu-abu coklat hingga hitam yang kaya foraminifera, mengindikasikan pengendapan pada lingkungan laut. Umur Formasi Baong bervariasi dari Miocen Bawah hingga Miocen Tengah dan secara vertikal dapat diklasifikasikan menjadi 3 unit, yaitu : Baong Bagian Atas, Baong Bagian Tengah dan Baong Bagian Bawah yang didominasi oleh shale. Penelitian ini bertujuan untuk mengidentifikasi potesni shale hidrokarbon dengan menganalisa Total Organic Carbon TOC , Brittleness Index BI , Hydrogen Index HI dan parameter-parameter kematangan. Berbagai metode dilakukan untuk menganalisa beberapa parameter tersebut, diantaranya dengan geokimia, mineralogi, petrofisik, cross plotting, dan interpretasi seismik. Hasil analisa Rock-Eval dan petrografi menunjukkan bahwa TOC bervariasi antara 0,1 ndash;2,3 , vitrinite reflectance Ro berkisar 0,4 ndash;0,9, HI bervariasi antara 31 ndash;171 dan temperatur maksimum Tmax berkisar antara 432 ndash;461oC. TOC menunjukkan kategori cukup hingga baik. Crossplot antara HI dan Tmax pada diagram van Krevelen menunjukkan dominasi kerogen tipe II dan III. Kerogen dapat diklasifikasikan sebagai early mature hingga mature. BI pada shale termasuk pada kategori less brittle hingga brittle. Area prospektif untuk pengembangan shale hidrokarbon yaitu pada sekuen MFS-2, MFS-3, SB-2 dan SB-3 dengan potensi berupa shale oil.
Shale hydrocarbon remains one of the hot topics in the petroleum industry. Indonesia has a great potential shale gas resource 574 TCF , and both government and oil companies have promoted the development of shale gas. Geochemical and geomechanical parameters are important aspects for exploring new shale gas play, and it provides significant information to optimize production plan and stimulation design. However, there is limited research on correlations inter petrophysical parameters for shale hydrocarbon reservoirs. The study area is located on the southeast border of the North Sumatra Basin. Lower Baong Formation shales are believed to be favorable shale gas targets with a dominant shale lithology. The Baong Formation occurs at depths from 1.465 ndash 3.224 m in the study area with the thick mudstone, dominated by gray, brown to black calcareous shale rich in foraminifera, indicating a marine environment. The Baong Formation age varies from the Lower Miocene to Middle Miocene can split into three vertical units the Upper Baong, Middle Baong, and the dominantly shale Lower Baong. This research is aimed to characterize and identify shale hydrocarbon by examining the Total Organic Carbon TOC , Brittleness Index BI , Hydrogen Index HI and maturity parameters. Various methods were used to analyze these parameters, including geochemistry, mineralogy, petrophysics, cross plotting, and seismic interpretation. Our analysis on Rock Eval and petrographic data shows that TOC varies between 0.1 ndash 2.3 , vitrinite reflectance of 0.4 ndash 0.9 , HI varies from 31 ndash 171, and maximum temperature Tmax from 432 ndash 461oC. TOC resulted in a poor to good category. A cross plot of the HI and Tmax in the van Krevelen diagram revealed the dominant kerogen types as II and III. The kerogen can be considered as early mature to mature. The BI of the shale formation of the research area is categorized in less brittle to brittle. The prospective areas for the development of shale hydrocarbon are the sequences of MFS 2, MFS 3, SB 2 and SB 3 with the potential of shale oil.
2017
T47595
UI - Tesis Membership  Universitas Indonesia Library
cover
Edward Iswardy
Abstrak :
Telah dibuat suatu prototipe untuk memantau dan mengukur aktivitas fisik tubuh manusia secara nirkabel menggunakan sensor akselerometer berbasiskan mikrokontroler dan komputer, yang dinamakan SPAFT-NA (Sistem Pemantau Aktivitas Fisik Tubuh Nirkabel berbasis Akselerometer). Prototipe menggunakan catu daya tunggal +3V. Sistem perangkat mempunyai kinerja yang baik dimana kesalahan pengukuran dalam besaran g (gravitasi) di bawah 5.1% dan koefisien korelasi antara pengukuran sudut kemiringan dengan tegangan keluaran lebih besar dari 0.99. Sistem dapat mendeteksi perbedaan jenis aktivitas fisik tubuh manusia seperti berdiri, duduk, tidur, berjalan, berlari, dan naik tangga, secara realtime dan simultan pada sumbu XYZ. Di samping itu, prototipe juga dapat berfungsi sebagai pedometer untuk mengukur data aktivitas dinamis seperti jumlah langkah, jarak tempuh, lama aktivitas, dan energi yang dipakai selama aktivitas. Sistem peralatan menunjukkan hasil pengukuran yang sama baiknya dengan produk pedometer komersial (Omron HJ-113). Bahkan, prototipe memperlihatkan kinerja yang lebih baik karena dapat mengukur pemakaian energi untuk aktivitas yang berbeda. ......Body has been made using accelerometers based on microcontroller and computer named as SAFT-NA (Sistem Pemantau Aktivitas Fisik Tubuh Nirkabel berbasis Akselerometer). The prototype has had low power system using +3V single supply. It shown that error range in term of g (gravitation) was below 5.1% and the coefficient of correlation between measure tilt and output voltage was greater 0.99. The system could detect different human body?s activities such as standing, sitting, lying, walking, running, and stepping up the stair, in realtime and simultaneously on XYZ-axis. Moreover, it acted as a pedometer for measuring dynamic activities, such as number of step, distances, time span, and energy expenditure. It shown that the system had a good correlation with a commercial product (Omron HJ-113). However, it shown that the system had better performance as it could calculate energy expenditure for different activities.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2008
T21389
UI - Tesis Open  Universitas Indonesia Library
cover
Fajar Bahari Kusuma
Abstrak :
ABSTRAK Hingga saat ini keberadaan air asin di wilayah Jakarta masih diperdebatkan oleh para peneliti air tanah. (Asseggaf dkk., 2017). Pendapat pertama air tanah asin tersebut diakibatkan oleh terjadinya intrusi air laut. Pendapat lainnya bukan disebabkan oleh intrusi air laut. Penelitian ini bertujuan untuk mengetahui penyebab air salin yang berada di Jakarta Utara khususnya daerah Tanjung Priok dan Koja. Untuk itu diperlukan metode yang dapat menggambarkan bawah permukaan dan arah aliran fluida permukaan. Metode yang digunakan untuk menggambarkan aliran fluida bawah permukaan pada penelitian ini adalah metode geolistrik. Metode geolistrik yang digunakan adalah SP untuk aliran fluida dan resistivity untuk sebaran air salin bawah permukaan. Resistivity diolah menggunakan software RES2DINV kemudian bersamaan dengan SP diolah di Surfer 13. Hasil kedua metode ini juga didukung oleh data geologi dan sumur warga serta data metode gravitasi berupa FHD. Hasil resistivity menunjukan adanya air asin di kedalaman 5-10 meter yang merupakan akuifer dangkal. Hasil SP menunjukan adanya aliran permukaan yang bergerak dari Utara ke Selatan pada Tanjung Priok dan Koja bagian utara. Kedua hasil tersebut mengindikasi terjadinya intrusi di Jakarta Utara.
ABSTRACT Until now, the presence of saline water in the Jakarta area is still debated by groundwater researchers. (Asseggaf et al., 2017). The first opinion of salty ground water is caused by sea water intrusion. Other opinions are not caused by sea water intrusion. This study aims to determine the causes of saline water in North Jakarta, especially the Tanjung Priok and Koja. For that we need a method that can describe the subsurface and the direction of surface fluid flow. The method used to describe the subsurface fluid flow in this study is the geoelectric method. The geoelectric method used is SP for fluid flow and resistivity for distribution of subsurface saline water. Resistivity is processed using RES2DINV software then together with SP processed in Surfer 13. The results of these two methods are also supported by geological data and community wells and gravity method data in the form of FHD. The results of the resistivity indicate the presence of saline water at a depth of 5-10 meters which is a shallow aquifer. The SP results show surface runoff that moves from North to South in the Tanjung Priok and northern part of Koja. Both of these results indicate the occurrence of intrusion in North Jakarta.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dyas Asri Muthia
Abstrak :
Telah dilakukan penelitian pada reservoar karbonat di Blok "D" yang terletak pada cekungan Jawa Timur Utara. Dalam penelitian ini, inversi seismik Extended Elastic Impedance (EEI) digunakan untuk memprediksi adanya reservoar gas dari posisi sumur ke sepanjang lintasan daerah survei seismik. Parameter yang digunakan adalah Lamda Mu Rho yang sensitif terhadap litologi maupun fluida dalam formasi. Pada sudut tertentu diperoleh nilai korelasi yang tinggi antara log target dengan log EEI yang merupakan best chi angle yang digunakan dalam membuat volum seismik scaled reflectivity. Korelasi log EEI dengan log LMR cukup besar dengan nilai sudut sebesar 10º (r=0.984725944623461) untuk parameter Lamda Rho, sedangkan parameter Mu Rho diperoleh nilai sudut sebesar -45º (r=0.991512244355567). Post stack inversi seismik sparse spike digunakan terhadap volum scaled reflectivity. Kemudian hasil inversi EEI digunakan untuk mendapatkan volum 2D yang digunakan untuk mengkarakterisasi adanya kandungan hidrokarbon di formasi secara vertikal. Hasil menunjukkan bahwa indikasi adanya reservoar karbonat di kedalaman 8400-8700 ft (1080-1170 ms) terdapat pada formasi Ngimbang yang berada pada nilai Mu-Rho berkisar 66-90 (Gpa*(gr/cc)). Sedangkan adanya kandungan gas dalam batuan karbonat diindikasikan dengan nilai Lamda-Rho berkisar 90-100 (Gpa*(gr/cc)). ......A study of characterization of carbonate reservoir has been done in Block "D" locatd at North East Java basin. In this study, Extended Elastic Impedance (EEI) seismic inversion is used to predict the existence of the gas reservoir wells to the position along the trajectory of the seismic survey area. The parameters used are Lamda Mu Rho sensitive to lithology and fluid in the formation. At a certain angle obtained high correlation between target log and EEI log that best chi angle which is used to make scaled reflectivity seismic cube. Correlation EEI log with target log is good enough at a value of angle 10º (r = 0.984725944623461) for Lambda Rho parameters, while the Mu Rho parameter obtained the value of angle ?45º (r = 0.991512244355567). Post Stack Sparse Spike Seismic Inversion is applied to scaled reflectivity seismic cube. Then EEI inversion results are used to obtain a 2D volume that is used to characterize the the presence of hydrocarbons at formation vertically. The results showed that the indications contained in the carbonate reservoir in depth 8400-8700 ft (1080-1170 ms) on Ngimbang formation which is at a value of Mu-Rho ranging from 66-90 (GPa * (g / cc)). While the gas content in carbonate rocks is indicated by a value of Lamda-Rho at the range 90-100 (GPa * (g / cc)).
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2016
S64910
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dhara Adhnandya Kumara
Abstrak :
Dewasa ini Indonesia tengah berusaha untuk memenuhi kebutuhan energi untuk tujuan ketahanan energi nasional. Salah satu energi yang tengah diusahakan adalah energi baru dan terbarukan yang salah satunya adalah energi panas bumi. Untuk mencapai target ini, eksplorasi energi panas bumi perlu digencarkan. Dalam eksplorasi panas bumi, metode yang sering digunakan adalah metode magnetotellurik. Dalam melakukan survei magnetotellurik terdapat banyak hal yang perlu dipertimbangkan untuk membuat suatu desain survei. Salah satu parameter penting dalam proses akuisisi data adalah mengetahui jumlah dan jarak antar stasiun yang tepat untuk memberikan gambaran bawah permukaan terbaik. Jarak antar stasiun sebaiknya tidak terlalu besar, dikhawatirkan apabila terlalu besar resolusi yang didapatkan terlalu rendah dan juga terjadi ekstraplorasi pada saat pengolahan data. Namun, apabila membuat jarak terlalu rapat itu juga akan menguras biaya dan waktu selama pengukuran. Terutama dalam survei magnetotellurik, untuk mendapatkan data yang dalam diperlukan waktu pengukuran yang semakin lama. Biasanya dalam eksplorasi panas bumi, pengukuran data magnetotellurik dapat dilakukan hinnga 24 jam. Sehingga apabila semakin banyak titik yang diukur semakin lama juga waktu yang diperlukan untuk mengukur. Pada saat ini, belum ada penelitian yang membahas berapa jarak optimum dalam akuisisi data magnetotelurik untuk eksplorasi panas bumi. Penggunaan jarak antar stasiun pada penelitian-penelitian sebelumnya sangatlah bervariatif. Hal ini tentunya berpengaruh pada gambaran sistem panas bumi hasil pengolahan data magnetotelurik tersebut. Penelitian ini bertujuan untuk mengetahui jarak antar stasiun yang paling optimum untuk eksplorasi pada lapangan panas bumi. Dimana penelitian ini akan dilakukan dengan melakukan pemodelan kedepan (forward modelling) dan pemodelan inversi (inverse modelling). Dengan membuat beberapa model dan melakukan variasi jarak stasiun, jarak antar stasiun yang optimal dapat disimpulkan. Berdasarkan studi yang dilakukan diketahui bahwa dengan jarak 500-1000 meter untuk daerah interest sudah mampu menggambarkan batasan clay cap dengan baik sehingga jarak ini sudah optimum. Sementara itu, diluar daerah interest diperlukan beberapa stasiun pengikat dengan jarak 1000 meter. Dibandingkan dengan inversi 2D, inversi 3D mampu menggambarkan sistem dengan lebih baik.
Currently Indonesia is trying to meet energy needs for national energy security goals. One of the energies being consideredis new and renewable energy, one of which is geothermalenergy. To meet this goal, exploration for geothermalenergy need to be intensified. The geophysics method which usually used for geothermal energy exploration is the magnetotelluric method. One of the important parameters in the data acquisition is decidingthe number and spacing for eachstation to provide the best sub-surfaceimage. The distance between stations should not be too large, that caused the resolution obtained will betoo low and extrapolation also occurs when the data processing obtained. However, if the distance too denseit will also drain the cost and time during the measurement. Especially in magnetotelluric surveys, to obtain deep depthrequires a longer measurement time. Usually in geothermalexploration, measurement of magnetotelluric data can be done up to 24 hours. Thus, whenmore points are measured the longer the time needed to measure. At present, there is no research that discusses the optimum distance in magnetoteluric data acquisition for geothermal exploration. The use of distance between stations in previous studies ishighly varied. This certainly affects the imaging of the geothermal system resulting from the processing of the magnetoteluric data. This study aims to determine the most optimum distance between stations for exploration on geothermal fields. Where this research will be carried out by doing forward modeling and inverse modelling. By building several models and varied the station spacing, optimum spacing in geotermalarea could be concluded. The study result shown that the optimum spacing is 500-1000 meters for the interest zone, it is capable to delineate the Top of Resevoar. Moreover, outside the interest zone several stasion should be put with the station spacing for about 1000 meters. 3D inversion shown better result in the ability on mapping the system compared with 2D inversion.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Krisna Angga Ramadha
Abstrak :
Telah dibuat suatu sistem rancang bangun sebuah alat untuk pengujian suatu metode dalam percobaan tumbukan dengan menggunakan sistem jalur udara atau air track. Sistem ini dirancang dengan tujuan agar dapat mempermudah dalam mengetahui suatu metode fisika khususnya teori tumbukan. Dalam sistem ini tidak hanya teori tumbukan saja yang berperan melainkan juga teori kekekalan momentum dan juga gaya gesek cukup memeberi andil yang besar dalam sistem ini. Dalam perkembangan teknologi saat ini teori mengenai tumbukan sangat penting guna kemajuan teknologi untuk saat ini dan masa yang akan datang. Dalam tugas akhir ini, akan diaplikasikan metode tersebut dimana akan digunakan dua buah benda uji yang akan saling bertumbukan satu sama lain sehingga akan dihasilkan efek lenting dari proses tumbukan tersebut ......Have been made a system design and deverlopment to a appliance for the examination of collison method by using air band system or airtrack . This system is designed with a purpose to be can water down in knowing a physics method specially collison theory. In this system do not only just collison theory which sharing but also conservation of momentum theory as well as style fiddle enough big share to give in this system. In technological growth in this time theory concerning collison of vital importance utilize technological progress to in this time and a period of to come. In this final duty, method application will be the where will be used by two test object to is knocking against each other one another so that will be yielded by effect dash away from collide process
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2008
TA-pdf
UI - Tugas Akhir  Universitas Indonesia Library