Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 3 dokumen yang sesuai dengan query
cover
Ari Stevanofiq
"ABSTRAK
Latar belakang: Oroantral Communication (OAC) merupakan salah satu komplikasi yang cukup sering ditemukan pasca melakukan ekstraksi gigi posterior rahang atas. Hingga saat ini telah diperkenalkan berbagai macam teknik perawatan bedah untuk melakukan penutupan kasus Oroantral Communication. Tujuan: Penelitian ini dibuat untuk melihat perawatan bedah yang optimum bagi kasus OAC serta mengevaluasi tingkat keberhasilan, komplikasi pasca perawatan, serta mengidentifikasi kelebihan serta kekurangan dari masing-masing perawatan. Metode: Pedoman penyusunan PRISMA (Preferred Reporting Items for Systematic reviews and Meta-Analyses) digunakan sebagai panduan penyusunan systematic review ini. Pencarian dilakukan untuk menemukan penelitian sepuluh tahun terakhir yang membahas penutupan OAC melalui tiga database yang berbeda. Hasil: Pencarian secara online menghasilkan 637 studi, ditemukan 2 studi untuk dilakukan dianalisa, dan diperoleh 1 buah teknik penutupan primer terhadap defek OAC (teknik flap bukal). Hal ini dikarenakan rentang waktu sepuluh tahun ditetapkan untuk pencarian literatur yang membahas penutupan primer kasus OAC. Tingkat keberhasilan rata-rata keseluruhan penutupan OAC dengan flap bukal mencapai 100% (hanya terdapat kegagalan pada satu kasus). Kesimpulan: Dari analisis penelitian ini, ditemukan bahwa metode intervensi ini mempunyai berbagai macam kelebihan, kekurangan serta komplikasi post-operatif yang harus dipertimbangkan dalam memutuskan teknik intervensi yang akan diterapkan untuk menutup defek OAC.

ABSTRACT
Oroantral Communication (OAC) is a complication that is quite often found after the extraction of maxillary posterior teeth. At this time, various kinds of surgical treatment techniques have been introduced to close the Oro-antral defects. The aim of this systematic review was to identify an ideal surgical treatment for OAC cases and evaluate the success rate, post-treatment complications, and identify the advantages and disadvantages of each treatment. PRISMA (Preferred Reporting Items for Systematic reviews and Meta-Analyses) guideline was used to conduct this systematic review. Literature searching was conducted in three different databases to find the last ten years of research that discussed the closure of OAC. Online searches resulted in 637 studies, and after selection process based on inclusion and exclusion criteria, 2 studies were included for analysis and there is only one primary closure technique (buccal flap). This result is due to ten years time range been given to collect the literatures that discuss about primary closure of OAC. The overall success rate of buccal flap techniqiue reaches 100% from all cases. The results of this systematic review indicate that this intervention technique has a variety of advantages, disadvantages and also post-operative complications that must be considered in deciding which intervention techniques will be applied to close the OAC defect"
2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Raedi Mahardika
"Latar Belakang: Komplikasi edema pascaodontektomi merupakan komplikasi yang sering terjadi. Evaluasi terhadap proses penyembuhan luka yang ditandai dengan edema pascaodontektomi perlu dilakukan dalam kurun waktu tertentu agar dapat memberikan edukasi yang lengkap dan tepat sehingga pasien mendapatkan informasi yang jelas mengenai waktu penyembuhan dan kemungkinan komplikasi yang umum terjadi pascaodontektomi. Pada penelitian ini digunakan 3D Scanner ekstraoral untuk mengevaluaasi edema maksilofasial yang terjadi pada pasien pascaodontektomi gigi molar tiga mandibula dengan anastesi lokal Tujuan: Penelitian ini bertujuan untuk melakukan evaluasi edema pascaodontektomi molar tiga bawah dengan anestesi lokal menggunakan teknologi 3D scanner esktra oral dalam pengukuran linear, ketebalan dan volumetrik. Metode: Sejumlah 55 pasien yang sesuai dengan kriteria inklusi dilakukan pengukuran dalam aspek aksial, koronal, sagital menggunakan pemindaian 3D scanner ekstraoral pada wajah. File diubah dalam format .Stl menggunakan software einstar 3D. Pengukuran edema dilakukan dalam aspek sagital, axial, dan koronal pada pasien pada hari ke-0 sebelum tindakan odontektomi, hari kedua dan ketujuh pascaodontektomi secara tiga dimensi menggunakan software 3D builder dan mesh lab. Kemudian data dianalisis secara statistic menggunakan IBM SPSS 26 Hasil: Pola perubahan edema pascaodontektomi gigi molar tiga mandibula dari perhitungan linear, ketebalan, dan volumetrik dari gambar 3D yang dilakukan dalam kurun waktu tertentu menunjukkan perubahan nilai yang cukup besar terjadi pada hari kedua. Dari hasil uji statistik dan grafik menunjukkan bahwa edema maksilofasial yang terjadi pada H2 mengalami kenaikan nilai secara linear dan volumetrik yang signifikan kemudian pada H7 mengalami penurunan secara signifikan. Namun pada H0 dan H7 masih terlihat adanya perbedaan sehingga kondisi edema maksilofasial tersebut masih belum mencapai nilai yang sama pada H0 atau sebelum tindakan odontektomi Kesimpulan :Terdapat perbedaan edema pada wajah pascaodontektomi gigi molar tiga mandibula dengan lokal anastesi pada hari ke-0, ke-2, ke-7 diukur secara linear, ketebalan dan volumetrik dengan nilai edema maksimal terjadi pada saat hari ke-2

Background: Post odontectomy edema is a frequent complication. Evaluation of the wound healing process characterized by post odontectomy edema needs to be carried out within a certain period of time in order to provide complete and appropriate education so that patients receive clear information regarding healing time and possible complications that commonly occur after odontectomy. In this study, an extra-oral 3D scanner was used to evaluate maxillofacial edema that occurred in post-odontectomy patients with mandibular third molars under local anesthesia. Objective: This study aims to evaluate post-odontectomy edema of lower third molars under local anesthesia using extra-oral 3D scanner technology in linear, thickness and volumetric measurements. Methods: A total of 55 patients who met the inclusion criteria had measurements taken in the axial, coronal and sagittal aspects using an extra-oral 3D scanner on the face. Files were converted in .Stl format using einstar 3D software. Edema measurements were carried out in the sagittal, axial and coronal aspects on patients on day 0 before odontectomy, the second and seventh days after odontectomy in three dimensions using 3D builder and mesh lab software. Then the data was analyzed statistically using IBM SPSS 26. Results: The pattern of changes in postodontectomy edema of the mandibular third molar from linear, thickness and volumetric calculations from 3D images carried out over a certain period of time shows that quite large changes in values occurred on the second day. From the results of statistical tests and graphs, it shows that the maxillofacial edema that occurred in H2 experienced a significant increase in linear and volumetric values, then in H7 it decreased significantly. However, at H0 and H7 there are still visible differences so that the condition of maxillofacial edema still has not reached the same value as at H0 or before the odontectomy. Conclusion : There are differences in edema on the face after odontectomy of mandibular third molars with local anesthesia on days 0, 2, 7, measured linearly, thickness and volumetrically with the maximum edema value occurring on day 2"
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2024
SP-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Antonius Berwin
"Latar Belakang: Gigi impaksi merupakan kondisi ketika gigi mengalami kegagalan untuk erupsi sepenuhnya ke lengkung gigi dalam waktu yang diharapkan. Berdasarkan frekuensi kejadiannya, gigi molar tiga rahang bawah (M3 RB) paling sering mengalami impaksi dengan prevalensi mencapai 60.6% di Indonesia. Salah satu faktor lokal utama terjadinya gigi M3 RB impaksi adalah kurangnya ruang pada lengkung rahang bawah yang sering dikaitkan dengan proses pertumbuhan tulang mandibula. Beberapa studi menunjukkan bahwa ukuran morfologi tulang mandibula yang mencerminkan kuantitas dan arah pertumbuhan tulang seperti tinggi simfisis mandibula, panjang badan mandibula, dan sudut gonial berpotensi untuk mempengaruhi kejadian gigi M3 RB impaksi.
Tujuan: Mengevaluasi hubungan kejadian gigi M3 RB impaksi dengan morfologi tulang mandibula.
Metode: Sebanyak 110 sampel sisi rahang bawah diperoleh dari 67 data radiografi panoramik digital pasien RSKGM FKG UI (50 perempuan dan 17 laki-laki; usia: 21.22–30.91 tahun). Sampel yang tersedia kemudian dibagi menjadi kelompok kasus (sisi rahang dengan gigi M3 RB yang mengalami impaksi baik fully unerupted atau partially erupted) dan kelompok kontrol (sisi rahang dengan gigi M3 RB yang erupsi sempurna) untuk dilakukan perbandingan. Pada studi ini, uji-t independen dan uji Anova 1 arah digunakan untuk menganalisis hubungan status impaksi gigi M3 RB dan klasifikasinya dengan morfologi tulang mandibula pada data berdistribusi normal. Di sisi lain, uji Mann-Whitney U dan Uji Kruskal Wallis digunakan untuk menganalisis hubungan status impaksi gigi M3 RB dan klasifikasinya dengan morfologi tulang mandibula pada data berdistribusi tidak normal.
Hasil: Tinggi simfisis mandibula dan sudut gonial secara statistik (p < 0.05) lebih rendah pada kelompok kasus. Sementara itu, panjang badan mandibula antara kelompok kasus dan kelompok kontrol tidak berbeda secara statistik (p > 0.05). Pada hasil tinjauan pasien laki-laki saja, tidak ditemukan adanya perbedaan tinggi simfisis, panjang badan mandibula, dan sudut gonial antara kelompok kasus dan kelompok kontrol secara statistik (p > 0.05).
Kesimpulan: Terdapat hubungan kejadian gigi M3 RB impaksi dengan ukuran tinggi simfisis dan sudut gonial. Semakin kecil ukuran tinggi simfisis dan sudut gonial, semakin besar kemungkinan gigi M3 RB mengalami impaksi. Di sisi lain, tidak ditemukan adanya hubungan kejadian gigi M3 RB impaksi dengan ukuran panjang badan mandibula.

Background: An impacted tooth is a condition when a tooth fails to fully erupt into the dental arch within the expected time. Based on the frequency of occurrence, the mandibular third molar (M3M) is the most frequently impacted with a prevalence of 60.6% in Indonesia. One of the main local factors for impacted M3M is the lack of space in the lower arch which is often associated with the growth process of the mandibular bone. Several studies have shown that the size of the mandibular bone morphology that reflects the quantity and direction of bone growth such as symphisis mandibular height, mandibular body length, and gonial angle has the potential to influence the occurance of impacted M3M.
Objective: To evaluate the relationship between the occurance of impacted M3M and mandibular bone morphology.
Methods: A total of 110 samples of the mandibular side were obtained from 67 digital panoramic radiographic data of RSKGM FKG UI patients (50 women and 17 men; age: 21.22–30.91 years). The data were then divided into the case group (jaw side with M3M that were fully unerupted or partially erupted) and the control group (jaw side with M3M that fully erupted) for comparison. In this study, an independent t-test and 1-way ANOVA test was used to analyze the relationship between the impaction status of M3M and their classification with the morphology of the mandible in normally distributed data. On the other hand, the Mann-Whitney U test and the Kruskal Wallis test were used to analyze the relationship between the impaction status of the M3M tooth and its classification with the morphology of the mandible bone in abnormally distributed data.
Results: Symphisis mandibular height and gonial angle were statistically (p < 0.05) lower in the case group. Meanwhile, the mandibular body length between the case group and the control group was not statistically different (p > 0.05). In the results of the review of male patients only, there was no statistical difference in symphisis height, mandibular body length, and gonial angle between the case group and control group (p > 0.05).
Conclusion: There is a relationship between the occurance of impacted M3M with the size of the symphisis height and gonial angle. The smaller the size of the symphisis height and gonial angle, the more likely the M3M to experience impaction. On the other hand, there was no relationship between the occurance of impacted M3M and mandibular body length.
"
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library