Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 3 dokumen yang sesuai dengan query
cover
Nur Wahidah
Abstrak :
Material komposit low-cost dan ramah lingkungan dipreparasimenggunakan campuran karbon aktif berbasis lindi hitam (AC) dan diatomit (DE) sebagai prekursor, dan dimanfaatkan untuk penyerapan ion tripolifosfat. Uji adsorpsi sistem batch digunakan untuk mengevaluasi kinerja adsorben. Dilakukan uji pengaruh waktu kontak, mixing ratio komposit, dosis adsorben, konsentrasi awal, dan pH larutan terhadap efisiensi adsorpsi. Komposit AC/DE5:1 memiliki luas permukaan paling besar, yaitu 244,87 m2/gdengan efisiensi adsorpsi sebesar 93,02% pada waktu kontak 10 menit pertama. Hasil ini 13,54% lebih tinggi dibandingkan efisiensi adsorpsi karbon aktif dan 55,27% lebih tinggi dari efisiensi adsorpsi diatomit. Efisiensi adsorpsi meningkat seiring dengan peningkatan waktu kontak dan dosis, dan menurun dengan adanya peningkatan konsentrasi P awal pada pH optimum, pH 7. Hasil karakterisasi dengan XRD menunjukkan bahwa komposit AC/DE hasil preparasi membentuk fasa semi-kristalin, dengan komponen mineral berupa gibbsite dan kuarsa.Persentase desorpsi fosfat dalam medium asam klorida 0,5 M lebih tinggi daripada dalam medium asam sitrat 0,3 M dan air. Komposit AC/DE yang telah menyerap anion fosfat berpotensi untuk diaplikasikan sebagai pupuk lepas lambat. ......A low-cost and environmental friendly composite material was prepared using a mixture of black liquor based activated carbon (AC) and diatomite (DE) as precursors, and used for tripolyphosphate ion adsorption. The batch system was used to evaluate the performance of the adsorbent. The effects of contact time, composite’s mixing ratio, dosage of adsorbent, initial concentration, and pH of the solution on the adsorption efficiency were carried out. AC/DE 5:1 composite have the largest surface area, which is 244.87 m2/g with adsorption efficiency of 93.02% at the first 10 minutes of contact time. This result is 13.54% higher than the adsorption efficiency of activated carbon and 55.27% higher than the adsorption efficiency of diatomite. Adsorption efficiency increases with increasing contact time and dosage, and decreases with increase in the initial P concentration at optimum pH 7. The result of characterization with XRD showed that the prepared AC/DE composite formed semi-crystalline phase, with mineral components such as gibbsite and quartz.The percentage of phosphate ion desorption in 0.5 M hydrochloric acid medium is higher than in the 0,3 M citric acid and water medium. AC/DE composite that have adsorbed phosphate anion is potential to be applied as slow release fertilizers.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
T54410
UI - Tesis Membership  Universitas Indonesia Library
cover
Rifahny Intan Satria Akhmad
Abstrak :
Ion tripolifosfat (P3O10-5) merupakan salah satu bentuk fosfat yang umumnya ditemukan pada limbah deterjen. Apabila tidak diolah dapat menyebabkan eutrofikasi (blooming alga). Karbon aktif yang dimodifikasi dengan besi oksida dapat digunakan untuk mengurangi jumlah ion tripolifosfat. Karbon aktif dibuat dengan memanfaatkan limbah lindi hitam hasil samping produksi bioetanol. Preparasi komposit karbon aktif/besi oksida dilakukan dengan menambahkan larutan besi dari FeSO4.7H2O ke dalam karbon aktif. Hasil karakterisasi menggunakan difraksi sinar-X menunjukan bahwa besi oksida yang terbentuk pada komposit karbon aktif/besi oksida merupakan fase goethite (α-FeOOH) dan berdasarkan data EDX jumlah kandungan besi yang terdapat pada kompossit karbon aktif/besi oksida adalah 17%. Kinerja komposit karbon aktif/besi oksida terhadap adsorpsi ion tripolifosfat dievaluasi berdasarkan uji variasi konsentrasi larutan awal tripolifosfat, pH, kecepatan agitasi dan waktu kontak. Persentase efisiensi maksimum ion tripolifosfat mencapai 96,87% dengan kapasitas adsorpsinya 1,5992 mg/g pada pH 3, konsentrasi awal larutan tripolifosfat 3 mg/L dan dosis adsorben 0,1 g. Hasil tersebut menunjukan bahwa karbon aktif yang dikompositkan dengan besi oksida memiliki efektifitas dan efisiensi yang tinggi untuk menurunkan ion tripolifosfat. Pada penelitian ini juga dilakukan desorpsi fosfat menggunakan medium asam sulfat, asam sitrat dan akuades. Jumlah fosfat yang terdesorpsi lebih besar dalam medium asam sulfat dengan persentase desorpsinya sebesar 87,71% selama 9 jam. ......Tripolyphosphate ion, known as P3O10-5, is one of phosphate forms which mostly recognized in the laundry wastewater. The abundant quantities of trpolyphosphate ions in the water resources potentially lead eutrophication or algae blooming therefore it damaged the inside-living organisms. To mitigate excess ion, activated carbon was modified with iron oxide can be used to remove the amount of tripolyphosphate ions. Activated carbon was made by utilizing black liquor waste water from bioethanol side-production. Activated carbon/iron oxide composites were prepared by introducing activated carbon into iron solution made from FeSO4.7H2. The result from X-ray diffraction characterization showed the main iron oxide actually present in the composites was goethite (α-FeOOH) and based on the result of SEM-EDX measurement it contained 17% of iron element. The performance of activated carbon/iron oxide composites on the adsorption of tripolyphosphate ions was evaluated by various initial concentrations of tripolyphosphate solutions, which were adsorbent dose, pH, mixing speed, and contact time. The maximum efficiency percentage of tripolyphosphate ions reached 96.87% with adsorption capacity of 1,5992 mg/g at an initial tripolyphosphate concentration of 3 mg/L, solution pH of 3 and 0,1 g of adsorbent dose. The results indicated that activated carbon/iron oxide were more effective to decrease tripolyphosphate ions than only activated carbons. This study also conducts desorption experiments of phosphate on sulfuric acid, citric acid, and aquades solutions. Amount of phosphate desorption in sulfuric acid medium was the highest desorption percentage around 87,717% within 9 hours.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
T54411
UI - Tesis Membership  Universitas Indonesia Library
cover
Ummu Hanifah
Abstrak :
Pemanfaatan tandan kosong kelapa sawit TKKS untuk memproduksi bioetanol terdiri dari tiga proses, yaitu: pretreatment, hidrolisis dan fermentasi. Proses pretreatment menghasilkan sejumlah besar limbah lindi hitam. Lindi hitam berbahaya untuk ekosistem jika dibuang langsung ke lingkungan karena memiliki COD, TSS dan pH yang tinggi. Metode dalam penelitian ini adalah koagulasi-flokulasi sebagai pengolahan pertama sedangkan jamur T. versicolor F200 sebagai pengolahan kedua pada pengolahan lindi hitam. Tujuan penelitian ini adalah meningkatkan dekolorisasi lindi hitam dengan menggunakan jamur T. versicolor F200. Aplikasi Response Surface Methodology (RSM) dengan menggunakan software Minitab 17 dilakukan untuk optimasi dekolorisasi yang dipengaruhi oleh variabel independen seperti CuSO4, Tween 80, dan agitasi. Hasil penelitian menunjukkan bahwa dekolorisasi lindi hitam dengan menggunakan metode koagulasi-flokulasi sebagai pengolahan pertama mampu mendekolorisasi sebesar 68%, sedangkan jamur T. versicolor F200 sebagai pengolahan kedua mampu mendekolorisasi sebesar 85%. Hasil optimasi dekolorisasi dengan RSM menunjukkan bahwa jamur T. versicolor F200 dapat mendekolorisasi lindi hitam sebesar 86-93% dengan R2=0.991 dengan variabel yang dominan adalah agitasi. ......The utilization of oil palm empty fruit bunches to produce bioethanol consist of three processes pretreatment, hydrolysis, and fermentation. The pretreatment process generated the high amounts of black liquor wastewater. Black liquor is harmful to aquatic ecosystem if discharge directly into water because it contains high COD, TSS and pH. The method in this research is using coagulation flocculation as first treatment and T. versicolor F200 as second treatment to decolorize of black liquor. The purpose of this research was increasing decolorization of black liquor by T. versicolor F200. The application of Response Surface Methodology (RSM) using Minitab 17 software was to optimize decolorization which influenced by independent variables such as CuSO4, Tween 80 and agitation. The result showed that decolorization 68% using coagulation flocculation as first treatment was obtained, while T. versicolor F200 as second treatment decolorized black liquor 85%. The application RSM to optimize decolorization of black liquor resulted 86-93% with R2 0.991 and agitation is the dominant independent variable.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
T48371
UI - Tesis Membership  Universitas Indonesia Library