Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 3 dokumen yang sesuai dengan query
cover
Vinitta Vrillya Adiniezza
Abstrak :

Ozon adalah gas dengan sifat oksidatif yang kuat yang dapat diproduksi dengan lucutan listrik dalam reaktor Dielectric Barrier Discharge (DBD). Penggunaan teknologi ozon sangat diminati karena kelebihannya dan aplikasinya di berbagai industri. Selain itu, produksi ozon dalam reaktor DBD juga memiliki potensi untuk menghasilkan produk samping nitrat sehingga bisa dianalisis potensi penggunaan reaktor DBD tersebut. Penelitian sebelumnya terkait sintesis ozon di reaktor DBD dengan penggunaan katalis memberikan hasil yang beragam. Penelitian ini menggunakan katalis berbasis silika gel dalam reaktor DBD. Penelitian ini melakukan uji produktivitas ozon dengan memvariasikan kondisi operasi dalam pembangkitan ozon di reaktor DBD. Setelah mendapatkan kondisi operasi terbaik, dilakukan pembangkitan ozon dengan katalis berbasis silika gel. Uji produktivitas nitrat tanpa menggunakan katalis dan dengan menggunakan katalis silika gel juga dilakukan. Penelitian ini bertujuan untuk menguji pengaruh variasi kondisi operasi dan katalis silika gel terhadap produktivitas ozon serta mengetahui kinerja produksi nitrat di reaktor DBD. Kondisi operasi terbaik untuk produksi ozon didapatkan di laju alir gas umpan 3 L/m dan tegangan listrik  15 kV pada reaktor 1 serta laju alir gas umpan 3 L/m dan tegangan listrik 4,4 kV pada reaktor 2, dengan hasil tertinggi 191,5 mg/jam. Produksi nitrat di reaktor yang digunakan menghasilkan konsentrasi hingga 34,53 ppm pada pH 10 dan 22,57 ppm pada pH 6.7 di larutan. Hipotesis awal mengantisipasi bahwa penggunaan katalis silika gel dapat meningkatkan produksi ozon, akan tetapi penggunaan katalis berbasis silika gel justru menurunkan produksi ozon dan nitrat dengan penurunan hingga 9-92% karena terpicunya dekomposisi ozon serta nitrogen oksida pada reaktor DBD. ......Ozone is a highly reactive gas produced through electric discharge in a Dielectric Barrier Discharge (DBD) reactor. Its advantages have made ozone technology highly sought after across various industries. In the DBD reactor, ozone production can also lead to the generation of nitrate as a by-product, necessitating further analysis. Previous studies on ozone synthesis in DBD reactors using catalysts have yielded mixed results. This study will employ silica gel catalyst in a DBD reactor. The study aimed to test ozone productivity by varying operating conditions. Ozone generation was carried out using the silica gel-based catalyst. Nitrate productivity tests were also conducted, both without a catalyst and with silica gel catalyst. The study sought to examine the effect of operational variations and the silica gel catalyst on ozone productivity, as well as assess nitrate production in the DBD reactor. The optimal operating conditions for ozone production were achieved at a feed gas flow rate of 3 L/m and an electric voltage of 15 kV in reactor 1, and an electric voltage of 4.4 kV in reactor 2. These conditions resulted in the highest yield of 191.5 mg/hour. Nitrate production in the reactor yielded concentrations of up to 34.53 ppm at pH 10 and 22.57 ppm at pH 6.7. The initial hypothesis suggested that the use of silica gel catalysts would increase ozone production. However, the utilization of silica gel-based catalysts actually decreased ozone and nitrate production by up to 9-92% due to ozone and nitrogen oxides decomposition in the DBD reactor.

Depok: Fakultas Teknik Universitas Indonesia, 2023
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Kelly Fajria Sugiarto
Abstrak :
Ozon dapat diproduksi secara artifisial melalui lucutan listrik dalam reaktor Dielectric Barrier Discharge (DBD). Produksi ozon dalam reaktor DBD juga memiliki potensi untuk menghasilkan produk sampingan nitrat, sehingga potensi penggunaan reaktor DBD dapat dikaji lebih lanjut. Dalam penelitian ini dilakukan uji kinerja reaktor dengan memvariasikan daya dan laju massa umpan untuk mendapatkan kondisi operasi terbaik dalam produksi ozon, kondisi operasi terbaik lalu digunakan untuk uji dekomposisi ozon dengan membandingkan 2 katalis yaitu Alumina dan Alumina/Fe(III). Uji dekomposisi ozon bertujuan untuk menguji aktivitas dekomposisi katalitik dari katalis, beserta pengaruh dekomposisi ozon katalitik dalam pembentukan nitrat, dengan hipotesis bahwa dekomposisi ozon akan menghasilkan  O yang akan bereaksi dengan N , meningkatkan produksi Nitrat. Impregnasi dari Alumina bertujuan untuk mendapatkan Alumina dengan aktivitas, selektivitas, dan stabilitas yang lebih tinggi. Produksi ozon terbaik didapatkan pada laju alir 3 L/menit dan tegangan 220 VAC (Volt Alternating Current) pada reaktor 1 serta 65 VAC pada reaktor 2. Alumina/Fe(III) memberikan aktivitas dekomposisi ozon menjadi oksigen tertinggi dibandingkan dengan Alumina, mencapai 100% pada Weight Hourly Space Velocity (WHSV) 1 menit-1. Namun, ditemukan bahwa penggunaan katalis berbasis Alumina pada WHSV 1 menit-1 justru mereduksi gas NOX dan menurunkan produksi nitrat hingga 94%. Melihat dari tingginya aktivitas katalitik dan ketersediaan dari Alumina/Fe(III), Alumina/Fe(III) dapat diuji lebih lanjut untuk dekomposisi katalitik. Selain itu, ditemukan bahwa produksi nitrat lebih tinggi didapatkan pada larutan dengan pH 10 dibandingkan pH 6.7. ......Ozone can be produced artificially through electrical discharge in a Dielectric Barrier Discharge reactor. Ozone production in DBD reactors also has the potential to produce nitrate byproducts, so the potential use of DBD reactors can be studied further. In this study, reactor performance tests were carried out by varying the power and feed mass rate to obtain the best operating conditions for ozone production, the best operating conditions and then used for ozone decomposition tests by comparing 2 catalysts, Alumina and Alumina/Fe (III). The ozone decomposition test is aimed to test the catalytic decomposition activity of the catalyst, along with the effect of catalytic ozone decomposition in NOx formation, with the hypothesis that ozone decomposition will produce  O that will react with  N, increasing the production of Nitrate. The impregnation of Alumina aims to obtain Alumina with higher activity, selectivity, and stability. The best ozone production is obtained at a flow rate of 3 L/menit and a power of 220 VAC (Volt Alternating Current) in reactor 1 and 65 VAC in reactor 2. Alumina/Fe(III) gives the highest ozone decomposition activity compared to Alumina, up to 100% on Weight Hourly Space Velocity (WHSV) 1 minute-1. However, it was found that the use of an Alumina-based catalyst at WHSV 1 min-1 actually reduced NOX gas and reduced nitrate production by 94%. However, it was found that the use of Aluminabased catalysts actually reduced NOX gas and reduced nitrate production by 94%. Given the high catalytic activity and availability of Alumina/Fe(III), Alumina/Fe(III) can be further tested for catalytic decomposition. In addition, it was found that higher nitrate production was obtained in solutions with a pH of 10 compared to a pH of 6.7.
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ken Azzahra
Abstrak :
Air lindi merupakan air yang telah melalui tumpukan sampah sehingga berpotensi untuk merusak lingkungan dan menimbulkan penyakit. Lindi dapat diolah menggunakan teknik Advanced Oxidation Processes (AOPs) berbasis ozon yang digenerasikan dengan Sistem Reaktor Plasma Dielectric Barrier Discharge (DBD) Ozon Nanobubble dengan umpan gas oksigen. Ozon dan spesies reaktif lainnya berperan untuk mengoksidasi air lindi sehingga dapat menurunkan konsentrasi Chemical Oxygen Demand (COD), Biology Oxygen Demand (BOD), Total Suspended Solid (TSS), Total Dissolved Solid (TDS), dan nitrat (NO3-), serta menetralisir pH larutan yang akan menjadi parameter penelitian. Penelitian dilakukan dengan lindi yang diambil di TPST Bantar Gebang dan diberi pre-treatment koagulasi menggunakan tawas dan filtrasi menggunakan karbon aktif. Penelitian dilakukan selama 60 menit dengan variasi laju alir, tegangan listrik, dan durasi uji. Hasil terbaik yang didapat dari masing- masing parameter percobaan adalah pH dengan penurunan 21,8%, TSS dengan degradasi 100%, TDS dengan kenaikan 514,4%, COD dengan penurunan 91,7%, nitrat dengan penurunan 78,8%, dan BOD dengan penurunan 75,1%. ......Leachate is water that has gone through a pile of garbage so it has the potential to damage the environment and cause disease. Leachate can be processed using the Advanced Oxidation Processes (AOPs) technique with the basis of ozonation generated by the Ozon Nanobubble Dielectric Barrier Discharge (DBD) Plasma Reaktor System with oxygen gas feed. Ozon and other reactive species play a role in oxidizing leachate so that it can reduce the concentrations of Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD), Total Suspended Solid (TSS), Total Dissolved Solid (TDS), and nitrate (NO3-), as well as neutralize the pH of the solution which will be the research parameter. This research was carried out with leachate taken at the Bantar Gebang TPST and pre-treated with coagulation using alum and filtration using activated carbon. The research was conducted for 60 minutes with variations in flow rate, voltage, and test duration. The best results obtained from each experimental parameter were pH with 21,8% decrease, TSS with 100% degradation, TDS with 514,4% increase, COD with 91,7% decrease, nitrate with 78,8% decrease, and BOD with a decrease of 75.1%.
Depok: 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library