Hasil Pencarian  ::  Simpan CSV :: Kembali

Abstrak :

Dalam industri minyak dan gas, korosi yang diakibatkan oleh karbon dioksida masih menjadi tantangan yang besar yang dapat menyebabkan kegagalan material. Penelitian ini menggunakan salah satu turunan dari senyawa piridin sebagai inhibitor yang dapat ditambahkan ke dalam sistem perpipaan untuk mengurangi laju korosi. Piridin ini diteliti dengan variasi konsentrasi, yaitu 25 ppm, 50 ppm, dan 75 ppm, serta variasi temepratur, yaitu 40° dan 90°C. Pengujian Fourier Transform Infrared Spectroscopy (FTIR) dan Gas Chromatography – Mass Spectrometry (GCMS) dilakukan untuk mengkarakterisasi inhibitor, dimana ditemukan bahwa inhibitor ini memiliki molekul dengan heteroatom nitrogen yang dapat memfasilitasi proses adsorpsi. Efisiensi inhibisi korosi juga diukur menggunakan metode polarisasi linear dan Electrochemical Impedance Spectroscopy (EIS), dimana ditemukan bahwa laju korosi menurun dengan meningkatnya konsentrasi inhibitor dan meningkat dengan meningkatnya temperatur. Data dari pengujian elektrokimia juga digunakan untuk menentukan model adsorpsi isoterm dan tipe adsorpsi, dimana ditemukan bahwa model adsorpsi yang didapat adalah adsorpsi isoterm Langmuir dengan tipe adsorpsi campuran fisika dan kimia. Morfologi permukaan sampel juga diteliti menggunakan Scanning Electron Microscopy (SEM) dan Energy Dispersive X-Ray (EDX) dan hasilnya menunjukkan bahwa sebelum diberikan inhibitor, produk korosi mendominasi permukaan dan jumlahnya menurun secara drastis setelah inhibitor diberikan, menandakan bahwa inhibitor ini telah sukses untuk menurunkan laju korosi baja karbon pada lingkungan CO₂.

 

---

In oil and gas industry, corrosion caused by carbon dioxide is one of the greatest challenges that could lead to material failure. This research uses a derivative of pyridine as an inhibitor that can be added to the piping system to reduce the rate of corrosion. Pyridine was examined with variations in concentration, namely 25 ppm, 50 ppm, and 75 ppm, as well as variations in temperature, namely 40° and 90°C. Fourier Transform Infrared Spectroscopy (FTIR) and Gas Chromatography - Mass Spectrometry (GCMS) tests were performed to characterize the inhibitors, which found that these inhibitors have molecules with nitrogen heteroatoms that can facilitate the adsorption process. The efficiency of corrosion inhibition was also measured using the potentiodynamic polarization method and Electrochemical Impedance Spectroscopy (EIS), which found that the corrosion rate decreased with increasing inhibitor concentration up to an optimal concentration of 50 ppm and increased with increasing temperature. The data from electrochemical testing was also used to determine the adsorption model of the isotherm and the type of adsorption, and it was found that the adsorption in this system obeyed Langmuir isotherm adsorption and is governed by a mixture of physical and chemical type. The surface morphology of the samples was also investigated using Scanning Electron Microscopy (SEM) and Energy Dispersive X-Ray (EDS) and the results showed that before injected with inhibitors, corrosion products dominated the surface and the amount decreased dramatically after the inhibitor was given, indicating that this inhibitor was successful to reduce the rate of carbon steel corrosion in the CO₂ environment.

Abstrak :
Imprinted polymer untuk ion Pb2+ (Pb-IIP) disintesis melalui proses self assembly antara monomer fungsional 4-vinil piridin dan asam metakrilat serta ion Pb2+ sebagai template. Kompleks template/monomer yang terbentuk dipolimerisasi menggunakan metode polimerisasi suspensi dengan pengikat silang etilen glikol dimetakrilat (EGDMA) dan inisiator 2,2?-azobis isobutironitril (AIBN). Proses leaching menggunakan HNO3 0,5 M dilakukan pada Pb-IIP hasil sintesis untuk mengelusi ion Pb2+, sehingga didapatkan rongga spesifik yang berfungsi sebagai situs pengenalan. Keberhasilan sintesis polimer dianalisis menggunakan FTIR. Puncak gugus C=C ulur vinil pada panjang gelombang 1630 cm-1 tidak muncul menandakan putusnya ikatan rangkap akibat adanya proses polimerisasi. Hasil karakterisasi EDX menunjukkan bahwa pengompleksan dan pengelusian ion Pb2+ berhasil dilakukan yang dikonfirmasi dengan munculnya intensitas Pb sebelum dilakukan elusi dan tidak munculnya intensitas Pb setelah dilakukan elusi. Hasil karakterisasi menggunakan PSA menunjukkan distribusi ukuran partikel Pb-IIP yaitu 34,5μm. Adsorben Pb-IIP diuji sifat adsorpsi serta desorpsinya dan diperoleh persen adsorpsi di atas 99% dan persen desorpsi sebesar 92,45%. Sebagai pembanding, pada non imprinted polymer (NIP) diperoleh persen adsorpsi sebesar 21,63% dan persen desorpsi sebesar 52,57%. Pb-IIP memiliki persen adsorpsi yang lebih besar terhadap Pb2+ dibandingkan dengan ion logam lainnya yaitu Ni2+, Co2+, Cu2+, dan Fe3+. Kemampuan adsorpsi maksimum pada Pb-IIP dapat dicapai saat pH 7 dan waktu kontak 60 menit. Pb-IIP dapat diaplikasikan pada sampel air di lingkungan dengan % recovery sebesar 110%.

---

An imprinted polymer for Pb2+ ion (Pb-IIP) was synthesized by self-assembly method using 4-vinyl pyridine, methacrylic acid as functional monomer and Pb2+ ion as template. Template/monomer complex was polymerized using a suspension polymerization method with crosslinker ethylene glycol dimethacrylate (EGDMA) and initiator 2,2'-azobis isobutyronitrile (AIBN). Pb-IIP was leached using 0.5 M HNO3 to remove Pb2+ ion that would produce the specific cavity as a recognition site. The success of synthesis was analyzed using FTIR resulting the absence of peak for C=C stretching at 1630 cm-1 indicated the bond rupture due to the polymerization process. EDX characterization indicated that complexing and leaching of Pb2+ ion were successfully confirmed by the appearance of Pb elements prior to elution and disappearance of Pb elements after elution. PSA characterization showed the particle size distribution of Pb-IIP was 34.5 μm. Adsorption and desorption process were performed on Pb-IIP adsorbent obtained > 99% for adsorption and 92.45% for desorption. NIP adsorbent used for comparison with Pb-IIP resulting 21.63% for adsorption and 52.57% for desorption. Pb-IIP had a better adsorption towards Pb2+ compared with other metal ions such as Ni2+, Co2+, Cu2+, and Fe3+. The maximum adsorption capacity of Pb-IIP could be achieved when the pH was 7 and contact times was 60 minutes. Pb-IIP could be applied to environmental water samples resulting % recovery 110%.