Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 6 dokumen yang sesuai dengan query
cover
Yoki Yulizar
Abstrak :
Wax deposition can cause a serious problem in the distribution process of crude oil through a pipeline. At low temperatures, wax molecules can interact to form a wax aggregate. One way to reduce the wax aggregation is to introduce an additive compound into the crude oil. In this study, 15 crude oil models were prepared by mixing gasoline, kerosene, oil, wax, and asphaltene. Oxirane ester copolymer (OEC) additive was introduced into the crude oil models with various concentrations and volumes, and its effect on the crude oil models’ pour point and viscosity were evaluated. OEC interactions with wax and asphaltene were observed by FTIR, and the wax aggregation process was observed using cross polarized microscopy (CPM). The optimum pour point of crude oil was reached at a temperature of 6oC and optimum viscosity at 10 cSt for the selected model 4. OEC additions of 5% and 10% require 500 and 300 µL, respectively, to achieve the optima pour point and viscosity. OEC was able to inhibit the wax aggregation, as evidenced from the interaction between OEC-wax at 722 cm-1 and OEC-asphaltene at 1604 and 1494 cm-1 of FTIR spectra. The distribution of the wax aggregate was observed using CPM, with the value of the wax appearance temperature (WAT) at 28.7oC. This research can be the basis for designing or selecting a molecule for use as a pour point depressant in accordance with the characteristics of crude oil, particularly since each source of crude oil has different characteristics.
Depok: Faculty of Engineering, Universitas Indonesia, 2016
UI-IJTECH 7:1 (2016)
Artikel Jurnal  Universitas Indonesia Library
cover
Anya Prilla Azaria
Abstrak :
ABSTRAK
Pemakaian campuran 20% biodiesel dengan minyak solar (B-20) dilaporkan menyebabkan tersumbatnya filter bahan bakar kendaraan diesel terutama pada suhu dingin dingin. Penyumbatan tersebut disebabkan oleh adanya endapan dari aglomerasi Monogliserida (MG). Adanya endapan tersebut mempengaruhi karakteristik biodiesel yaitu flow properties yang dapat diukur dengan 5 parameter : viskositas, densitas, Cloud Point (CP), Pour Point (PP), dan Cold Filter Plugging Point (CFPP). Berdasarkan penelitian sebelumnya, penambahan surfaktan Sorbitan Monooleat (SMO) pada biodiesel dapat menurunkan CP dan PP berturut-turut sampai 3°C. Dilaporkan bahwa, penambahan alkohol sebagai co-surfaktan dapat meningkatkan kinerja SMO. Pada penelitian ini, digunakan surfaktan SMO dengan co-surfaktan octanol. Octanol yang merupakan jenis alkohol dengan rantai panjang dan dapat berinteraksi lebih baik dengan SMO. Pada setiap biodiesel dengan kandungan MG yang berbeda, penambahan SMO divariasikan sebesar 0,1-1% volume biodiesel. Perbandingan fraksi mol SMO/octanol yang digunakan adalah 1:1. Penyimpanan sampel biodiesel dikondisikan pada suhu ruang (±27°C) dan suhu dingin (±16°C). Pengaruh SMO dan octanol terhadap suhu awal pembentukan kristal MG pada biodiesel dianalisa dengan metode Differential Scanning Calorimetry (DSC). Karakterisasi awal biodiesel juga dilakukan untuk mengetahui kadar MG, flash point, dan acid number. Pengaruh terhadap flow properties diukur berdasarkan 5 parameter yaitu : viskositas, densitas, CP, PP, dan CFPP. Sedangkan perubahan diameter partikel MG dianalisa dengan Particle Size Analyzer (PSA), dan interaksi antara MG dan SMO dengan Octanol dianalisa dengan Fourier Transform Infra-Red Spectroscopy (FTIR). Penggunaan SMO dan octanol dapat menurunkan CP, PP, dan CFPP secara berturut-turut sebesar ±4,6°C, ±4°C, dan ±3°C yang menyebabkan perubahan suhu melting MG dari 9,79°C menjadi 4,97°C untuk biodiesel dengan kadar MG sebesar 0,4% (B-100A) dan 22,21°C menjadi 21,54°C untuk biodiesel dengan kadar MG sebesar 0,6% (B-100C). Perubahan diameter partikel MG sebelum dan setelah penambahan SMO dan octanol berturut-turut sebagai berikut, 8,18 menjadi 0,30 μm, 38,17 menjadi 3,63 μm, dan 68,28 menjadi 8,90 μm. Analisa FTIR mengindikasikan adanya pergeseran bilangan gelombang pada MG sebelum dan sesudah penambahan SMO dan octanol yang mengindikasikan terjadinya ikatan hidrogen intermolekular yang dapat mengurangi tegangan permukaan biodiesel dan menyebabkan perbaikan flow properties biodiesel.
ABSTRACT
The use of mixture of 20% biodiesel with diesel oil (B-20) is reported to cause blockage of diesel vehicle fuel filters, especially at cold temperatures. The blockage is caused by the agglomeration of Monoglycerides (MG). The presence of these deposits affects the characteristics of biodiesel's flow properties which can be measured by 5 parameters: viscosity, density, Cloud Point (CP), Pour Point (PP), and Cold Filter Plugging Point (CFPP). Based on the previous research, the addition of Sorbitan Monooleate (SMO) to biodiesel can reduce CP and PP, respectively, up to 3°C. It was reported that the addition of alcohol as co-surfactant can improve the SMO's performance. In this study, the SMO surfactant were used with the octanol co-surfactants. Octanol is a type of alcohol with a long chain and can interact better with the SMO. For each biodiesel with different MG's level, the addition of SMO was varied by 0,1-1% by volume biodiesel. The molar ratio of SMO/octanol used is 1:1. Biodiesel samples were storaged at room temperatures (±27°C) and cold temperatures (±16°C). The effect of SMO and octanol on the initial temperature of MG's crystal formation on biodiesel was analyzed by the Differential Scanning Calorimetry (DSC) method. The initial characterization of biodiesel was also analyzed to determine the MG's level, flash point, and acid number. The effect on flow properties was measured based on 5 parameters: viscosity, density, CP, PP, and CFPP. Whereas changes in MG's particle diameter were analyzed by Particle Size Analyzer (PSA), and the interaction between MG and SMO with octanol were analyzed by Fourier Transform Infra-Red Spectroscopy (FTIR). The use of SMO and octanol could reduce CP, PP, and CFPP respectively by ±4,6°C, ±4°C, and ±3°C which caused changes in MG melting temperature from 9,79 to 4,97°C for biodiesel with MG's level of 0,4% (B-100A) and 22,21°C to 21,54°C for biodiesel with MG's level of 0.6% (B-100C). Changes in the diameter of MG's particle before and after the addition of SMO and octanol are respectively, 8,18 to 0,30 μm, 38,17 to 3,63 μm, and 68,28 to 8,90 μm. FTIR analysis indicated wavenumber's shifts in MG before and after the addition of SMO and octanol which indicates the intermolecular hydrogen bonds that can reduce the surface tension of biodiesel and cause improvements in biodiesel's flow properties.
2020
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Muhammad Rifqi
Abstrak :
60 juta ton produksi minyak sawit dunia menghasilkan 600 ribu ton limbah SBE. SBE dikelola dengan cara dibakar (menggunakan incinerator) atau dibuang pada landfill. Namun, karena SBE mengandung kadar minyak yang tinggi, maka pembuangan SBE dalam bentuk landfill mengakibatkan polusi tanah dan air yang substansial (Raksi, 2009). SBE digunakan karena masih mengandung minyak nabati yang tinggi sekitar 20-40% yang berpotensial untuk dilakukannya pengolahan lebih lanjut seperti dijadikan biodiesel atau biolubricant. Tujuan dari penelitian ini adalah mensintesis dan mengkarakterisasi ester propilen glikol atau biolubricant yang dihasilkan dari hasil modifikasi alkohol yaitu propilen glikol dengan asam lemak yang berasal dari SBE oil sebagai biolubricant. Hasil dari modifikasi ini adalah produk ester propilen glikol. Propilen glikol dipilih karena memiliki struktur yang bercabang, viskositas yang tinggi dan memiliki titik leleh yang rendah. Tahapan pada penelitian ini terbagi menjadi empat buah tahapan. Pada tahap pretreatment telah menghasilkan SBEO dengan kualitas sesuai dengan standar nilai RBDPO. Pada tahap esterifikasi telah menghasilkan minyak SBE yang memiliki nilai asam lemak bebas yang rendah untuk mencegah penyabunan. Pada proses transesterifikasi tahap 1 minyak SBE telah diubah menjadi metil ester atau biodiesel dengan variasi rasio mol yaitu 1:6 antara SBEO dengan metanol dengan yield 99,21%. Proses transesterifikasi tahap 2 metil ester atau biodiesel telah diubah menjadi ester propilen glikol. Setelah proses sintesis selesai, tujuan terakhir yaitu karakterisasi, dilakukan uji GC-MS, densitas, viskositas, flash point, dan pour point. Hasil dari modifikasi ini adalah produk ester propilen glikol dengan nilai flash point adalah 252°C dan nilai pour point adalah -7°C
60 million tons of world palm oil production produces 600 thousand tons of SBE waste. SBE is managed by burning (using an incinerator) or disposed of at the landfill. However, because SBE contains high oil content, the disposal of SBE in the form of landfills can caused soil and air pollution (Raksi, 2009). SBE is used because it still contains about 20-40% high vegetable oil which has the potential to be processed further such as biodiesel or biolubricant. The purpose of this study is to synthesize and characterize propylen glycol ester derived from propylen glycol and fatty acid from SBE oil as a hidraulic lubricant. The results of this modification are propylene glycol esters. Propylene glycol is chosen because it has a branching structure, high viscosity and has a low melting point. The stages of study are divided into four stages. In the pretreatment stage, the SBEO has been produced with quality in accordance to the RBDPO value standards. At the esterification stage, SBE oil produced a low value of free fatty acids to prevent saponification. In the first transesterification stage, SBE oil has been converted into methyl esters or biodiesel with a variation of the mole ratio of 1:6 between SBEO and metanol with a yield of 99.21%. The step 2 transesterification process of methyl esters or biodiesel has been converted into propylene glycol esters. After the synthesis process is complete, the final goal is characterization, GC-MS test, density, viscosity, flash point, and pour point. The results of this modification are propylene glycol esters with a flash point value of 252°C and the pour point value is -7°C.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Arif Rahman Hakim
Abstrak :
Terdepositnya parafin wax dalam minyak mentah dapat menimbulkan gangguan dalam proses produksi minyak mentah, terutama ketika transportasi dalam pipa saluran. Kristal wax ini mengendap di dalam pipa dan akan menghalangi aliran minyak mentah, untuk itu perlu adanya penanganan serius untuk mencarikan solusi atas masalah ini. Salah satu cara penanganan pengendapan wax adalah dengan menambahkan aditif berupa pour point depressant ke dalam minyak mentah. Pada penelitian kali ini, diseleksi 23 jenis pour point depressant (PPD) yang berasal dari berbagai supplier bahan kimia dan diujikan kemampuannya menurunkan pour point dari minyak mentah fraksi berat dari Cilacap. Hasil seleksi didapatkan satu aditif terbaik yaitu dengan kode L, dan dikarakterisasi dengan GCMS dan FTIR didapatkan senyawa campuran alkanol rantai panjang dan naphthalene. Dengan penambahan 5000μL/L, aditif ini mampu menurunkan pour point sampel minyak mentah sebesar 6oC dan dengan penambahan 10000μL/L, mampu menurunkan sebesar 9oC. Untuk mengetahui bagaimana aditif PPD tersebut berinteraksi dengan wax, dilakukan studi dengan mengujinya lewat instrumentasi XRD (X-Ray Diffraction) yang menghasilkan intensitas peak XRD yang menurun seiring penambahan dosis PPD dan instrumentasi CPM (Cross Polarized Microscopy) memperlihatkan bahwa setelah penambahan PPD, wax yang terbentuk saat suhu 30oC lebih sedikit. Kesimpulan didapati bahwa PPD jenis ini mampu teradsorpsi di permukaan wax sehingga menghambat proses kristalisasi wax. ...... The precipitation of paraffinic wax in the crude oil causes a serious problem to the production process of oils, especially in the process of transportation in the pipelines. The deposition of wax in the pipeline trapped out the oil and inhibit the oil to flow. A serious treatment must be applied to solve this problems. One of the method is the addition of additives into the crudes. The additives are named as pour point depressants (PPD). In this research, 1 of the best from 23 pour point depressant additives that come from some chemical suppliers, was selected. The selection is based on their performance to depress the initial pour point of the Cilacap’s heavy crude oil. The PPD with L code was known having the best performance on the crude. This PPD was characterized by FTIR and GCMS, hence obtained the information about this PPD, it is consist of long chain of alkanol and naphthalene. With the dosage of 5000μL/L, this PPD can decrease the pour point as much as 6oC from the initial point, and with the dosage of 10000μL/L, this PPD can decrease as much as 9oC. In order to know how can this type of PPD interact with the wax, studied had been done with XRD (X-Ray Diffraction) and CPM (Cross Polarized Microscopy) instrumentation. The increasing dosage of PPD in wax caused the peak intensity of wax in XRD decrease. CPM instrumentation showed that after the addition of PPD, the wax precipated from crude oil decrease significantly on the temperature of 30oC. In conclusion, this type of PPD can interfere the wax crystal growth by adsorption, the adsorption takes place on the surface of wax crystal.
Depok: Fakultas Matematika Dan Ilmu Pengetahuan Alam Universitas Indonesia, 2014
S57160
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dwi Fanny Anindyka
Abstrak :
Dalam menurunkan pour point model crude oil yang tinggi akibat adanya agregasi molekul-molekul wax, dilakukan penambahan inhibitor wax . Inhibitor wax yang digunakan merupakan senyawa aktif alami yang terkandung di dalam buah lerak (Sapindus rarak DC), diekstraksi menggunakan pelarut toluena dan etil asetat. Didapatkan dua inhibitor yaitu fraksi toluena (FT) dan fraksi etil asetat (FEA) lalu dilakukan uji kualitatif fitokimia, kromatografi lapis tipis serta karakterisasi FTIR. Senyawa triterpenoid di dalam inhibitor FT mampu menurunkan pour point model crude oil dari 21°C hingga 12°C pada dosis penambahan 1000 ppm, sedangkan saponin di dalam FEA dengan dosis 3000 ppm. Uji viskositas dan WAT model crude oil menunjukkan adanya penurunan viskositas dari 80 mPa.s menjadi 15 mPa.s untuk FT dan menjadi 12.5 mPa.s pada penambahan FEA. WAT model crude oil mengalami penurunan dari 32.9°C menjadi 28°C. Dari hasil studi ini diketahui bahwa senyawa aktif triterpenoid di dalam fraksi toluena (FT) lebih baik menginhibisi wax di dalam model crude oil. ......Reducing the high pour point of crude oil models due to aggregation of wax molecules is by adding wax inhibitor. Wax inhibitor that used in this research is natural active compounds that contained in Lerak fruit (Sapindus rarak DC), then extracted using toluene and ethyl acetate. It obtained two inhibitors, toluene fractions (FT) and ethyl acetate fraction (FEA), both fractions tested by phytochemical qualitative test, thin layer chromatography (TLC) and FTIR characterization. Triterpenoid compounds in the FT inhibitor capable to reduce the pour point of crude oil models from 21°C to 12°C at 1000 ppm dose addition, while saponin in the FEA at dose of 3000 ppm. Viscosity and WAT of crude oil models test showed a decrease in viscosity 80 mPa.s to 15 mPa.s for FT and to 12.5 mPa.s for FEA additions. WAT of crude oil model decreased from 32.9°C to 28°C. From this study, it is known that the triterpenoid in toluene fractions (FT) better to inhibit wax in crude oil model.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2015
S60585
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Dzaky Fajratama
Abstrak :
ABSTRAK
Minyak kelapa sawit merupakan bahan baku unggul pembuatan biodiesel di Indonesia. Meskipun Indonesia memiliki iklim tropis, Pemanfaatan biodiesel sawit diselidiki memiliki masalah dengan sifat aliran dingin terutama di daerah-daerah dataran tinggi. Masalah umum lainnya dari Biodiesel adalah kemudahan degradasi selama penyimpanan jangka panjang. Minyak kelapa sawit memiliki stabilitas oksidasi yang lebih baik, tetapi titik awannya tinggi karena tingginya kadar asam lemak jenuh. Di sisi lain, minyak mikroalga memiliki titik kabut dan titik tuang yang rendah, tetapi lebih mudah teroksidasi karena tingginya tingkat FAME tak jenuh. Oleh karena itu, kombinasi sifat tak jenuh tunggal dan jenuh antara Minyak Kelapa Sawit dan minyak Mikroalga membuatnya lebih disukai sebagai campuran bahan baku untuk meningkatkan kualitas Biodiesel. Model senyawa alga metil diformulasikan berdasarkan komposisi asam lemak Nannochloropsis sp. dari literatur. Dalam penelitian ini, skema pencampuran minyak dilakukan dengan variasi 5%, 10%, 20%, 30% penambahan Microalgae Oil ke Palm Oil. Transesterifikasi terjadi pada 60-700C dengan penambahan katalis basa 0,6%-wt dan metanol 40% -v/v selama 1-1,5 jam. FAME dianalisis berdasarkan SNI 7182:2015 dengan empat parameter utama diantaranya angka asam total (ASTM D 6644), titik kabut dan titik tuang (ASTM D 2500, dan ASTM D97), dan stabilitas oksidasi (EN 14112). Tujuan dari penelitian ini ialah menentukan rasio campuran yang optimal antara minyak kelapa sawit dan minyak mikroalga untuk produksi biodiesel. Berdasarkan percobaan, rasio campuran biodiesel yang optimal ditemukan pada 5% dengan cloud dan titik tuang masing-masing adalah 15.30C dan 120C. Stabilitas oksidasi dan angka asam 5% yang diperoleh adalah 10,58 jam, dan 0,175 mg KOH /g. Oleh karena itu, campuran biodiesel mengkonfirmasi bahwa asam lemak tak jenuh dari minyak mikroalga dapat meningkatkan sifat aliran dingin dari bahan bakar biodiesel kelapa sawit.
ABSTRACT
Palm oil is reported as the superior feedstock of biodiesel producing in Indonesia. Although Indonesia has tropical climate, Utilization of palm biodiesel is investigated having problems with the cold flow properties particularly in the high-altitude areas. The other common issue of Biodiesel is the ease of degradation during long-term storage. Palm oil has better oxidation stability, but high cloud point due to the high levels of saturated fatty acids. On the other hand, microalgae oil has low cloud and pour point, but more easily oxidized due to the high levels of unsaturated FAME. Therefore, the combination of monounsaturated and saturated properties between Palm Oil and Microalgae oil makes it preferable as raw materials blending to upgrade the quality of Biodiesel. The model algal methyl compounds were formulated based on fatty acid compositions of Nannochloropsis sp. from the literature. In this research, the oil blending scheme was done by variations 5%,10%,20%,30% of addition Microalgae Oil to Palm Oil. The transesterification occurred at 60-700C with the addition of base catalyst 0.6%- wt and methanol 40%-v/v during 1-1.5 hours. The FAMEs were analysis according to SNI 7182:2015 with four main parameters including total acid number (ASTM D 6644), cloud point and pour point (ASTM D 2500, and ASTM D97 respectively), and oxidation stability (EN 14112). The purpose of this research was to determine the optimum blending ratio between palm oil and microalgae oil for biodiesel production. Based on the experiment, the optimum blending ratio of biodiesel was found on 5% with the cloud and pour point are 15.30C and 120C respectively. The oxidation stability and total acid number of 5% blends obtained were 10.58 hours, and 0.175 mg KOH/g biodiesel respectively. Hence, the biodiesel blends confirm that the unsaturated fatty acids of microalgae oil can enhance the cold flow property of palm biodiesel fuels.
2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library