Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 2 dokumen yang sesuai dengan query
cover
Lia Putriyana
"Isu lingkungan dalam pemenuhan kebutuhan energi menjadi fokus pada penelitian ini. Pada penelitian ini, potensi energi panas bumi dikombinasikan dengan mekanisme penangkapan dan penyimpanan CO2 untuk dapat mengurangi secara signifikan emisi CO2. Pengoperasian CO2 memungkinkan pemanfaatan formasi geologi/potensi panas bumi dengan permeabilitas dan temperatur rendah, yang selama ini tidak dianggap layak secara ekonomi. Secara umum penelitian ini terbagi menjadi tiga tahap, didahului dengan menginventarisasi
potensi panas bumi temperatur rendah – sedang di Indonesia, selanjutnya dilakukan penilaian kesesuaian kondisi subsurface untuk kesesuaian sebagai CCUS dan perangkingan berdasarkan skor yang didapatkan. Keluaran dari tahap satu berupa peta indikatif yang menginformasikan lokasi potensi panas bumi temperatur rendah – sedang yang sesuai digunakan untuk aplikasi CCUS. Dari studi ini diketahui, lapangan Batubini, Sanggala, dan Mengkausar merupakan tiga lapangan panas bumi teratas yang sesuai untuk penyimpanan CO2. Selain itu, dilakukan
identifikasi potensi EBT lainnya yang ada di sekitar lokasi potensi panas bumi terpilih. Pada tahap kedua dilakukan simulasi numerik dari salah satu lokasi terpilih guna mengetahui besarnya potensi listrik yang dapat dihasilkan. Tahap ketiga, dilakukan penyusunan sistem poligenerasi untuk memanfaatkan energi panas bumi dan energi surya sebagai sumber energi yang digunakan untuk beberapa pemanfaatan, antara lain: produksi air bersih, produksi
hidrogen, penangkapan CO2, pendinginan, pembangkit listrik siklus biner dan superkritikal CO2. Analisis thermodinamika, ekonomi dan lingkungan dilakukan pada sistem poligenerasi yang diusulkan. Validasi model dari masing – masing unit desalinasi, unit produksi hidrogen,unit penangkapan CO2, unit pendingin, dan unit pembangkit dilakukan terhadap hasil percobaan yang pernah dilakukan, Selanjutnya, analisis sensitivitas dari masing – masing parameter kunci dari masing – masing unit dilakukan guna mengetahui sejauh mana perubahan parameter – prameter tersebut berpengaruh terhadap variabel tetap berupa biaya rata – rata pembangkitan
listrik atau leverage cost of electricity (LCOE), biaya rata – rata produksi hidrogen atau leverage cost of hydrogen (LCOH), biaya rata – rata produksi air bersih atau leverage cost of fresh water (LCOFW), dan biaya rata – rata penangkapan CO2 atau leverage cost of CO2 (LCOCO2). Beberapa parameter pada sistem poligenerasi yang diusulkan berpengaruh terhadap biaya rata – rata, perubahan variabel akan berpengaruh terhadap variabel tetap tersebut yang selanjutnya dilakukan optimasi multi-objektif untuk mengetahui sejauh mana perubahan variabel
berpengaruh terhadap biaya rata – rata tersebut. Penelitian ini diharapkan dapat berkontribusi untuk memberi informasi dan gambaran mengenai potensi dan prospek sistem panas bumi temperatur rendah – sedang di Indonesia, memberi peluang pengurangan emisi CO2 dan dapat mendorong pemanfaatannya guna memenuhi kebutuhan energi di suatu daerah.

Environmental Issues in Meeting Energy Needs as the Focus of This Research This research focuses on addressing environmental issues related to energy needs. It explores the potential of geothermal energy combined with carbon capture and storage (CCS) mechanisms to significantly reduce CO₂ emissions. The operation of CO₂ injection allows for the utilization of geothermal formations with low permeability and low temperature, which were previously considered economically unviable. In general, the study is divided into three stage: Stage one: Assessment of subsurface conditions for suitability with CCS applications, followed by a ranking based on scores obtained, The output of this phase is an indicative map identifying locations with low-to-moderate geothermal potential suitable for CCS applications. From the study, the Batubini, Sanggala, and Mengkausar geothermal fields were identified as the top three sites suitable for CO₂ storage. Additionally, other renewable energy potentials around the selected geothermal locations were identified. Stage Two: Numerical simulation at one of the selected locations to determine the potential electricity generation. Stage Three: Development of a polygeneration system that utilizes geothermal and solar energy for multiple applications, including Production of clean water, Hydrogen production, CO₂ capture, Cooling systems, Binary cycle and supercritical CO₂ power generation, Thermodynamic, economic, and environmental analyses were conducted on the proposed polygeneration system. The models for each unit (desalination, hydrogen production, CO₂ capture, cooling, and power generation) were validated against experimental results. A sensitivity analysis was performed on key parameters of each unit to assess the extent to which parameter changes impact fixed variables, such as: Levelized Cost of Electricity (LCOE), Levelized Cost of Hydrogen (LCOH), Levelized Cost of Fresh Water (LCOFW), Levelized Cost of CO₂ (LCOCO₂), Changes in certain parameters within the proposed polygeneration system affected the levelized costs. A multi-objective optimization was carried out to determine how variable changes impact these costs. This study aims to contribute to insights into the potential and prospects of low-to-moderate geothermal systems in Indonesia, offering opportunities for CO₂ emission reduction and promoting their utilization to meet regional energy needs."
Depok: Fakultas Teknik Universitas Indonesia, 2024
D-pdf
UI - Disertasi Membership  Universitas Indonesia Library
cover
Muhammad Raihan Pratama
"Bioenergy with carbon capture and storage (BECCS) memiliki potensi besar dalam mengurangi emisi karbon dari atmosfer hingga dapat mencapai emisi negatif. Teknologi ini dapat diintegrasikan pada sistem poligenerasi pembangkit listrik biomassa dan green chemicals seperti metanol. Penelitian ini bertujuan untuk memperoleh efisiensi energi sistem secara keseluruhan, biaya produksi dan CO2 avoidance cost (CAC), serta nilai emisi CO2eq dari integrasi BECCS pada sistem poligenerasi. Aspen Plus v.11 digunakan untuk simulasi proses sistem poligenerasi, sedangkan unit CCS disimulasikan dengan Aspen HYSYS v.11. Dengan memvariasikan kapasitas produksi listrik, tandan kosong kelapa sawit (TKKS) digunakan sebagai bahan bakar pembangkit listrik biomass integrated gasification combined cycle (BIGCC) sehingga dihasilkan gas buang mengandung CO2 yang ditangkap untuk sintesis metanol dan CCS. Hidrogen untuk sintesis green methanol diproduksi melalui elektrolisis PEM dengan variasi dua sumber energi listrik terbarukan, yaitu energi surya (PV-PEM) dan energi geotermal (GEO-PEM). Analisis lingkungan dilakukan dengan metode life cycle assessment (LCA) dengan lingkup cradle-to-gate dan analisis keekonomian dilakukan dengan metode levelized cost. Hasil penelitian menunjukkan bahwa efisiensi sistem keseluruhan lebih tinggi pada skema PV-PEM (11,33%) daripada GEO-PEM (7,05%). Sistem BECCS yang diintegrasikan pada pembangkit listrik BIGCC menunjukkan emisi negatif (-1,00 sampai -0,76 kg CO2eq/kWh). Untuk sintesis metanol, nilai emisi dengan skema PV-PEM (-1,14 sampai -1,28 kg CO2eq/kg MeOH) lebih tinggi daripada skema GEO-PEM (-1,52 sampai -1,65 kg CO2eq/kg MeOH). Pembangkit dengan kapasitas 30,87 MW memiliki biaya produksi dan nilai CAC (0,181 USD/kWh dan 67,66 USD/ton CO2) yang lebih besar daripada kapasitas 50 MW (0,139 USD/kWh dan 56,06 USD/ton CO2). Skema PV-PEM menghasilkan biaya produksi metanol (1.011-1.049 USD/ton) yang lebih besar daripada skema GEO-PEM (967-1.005 USD/ton).

Bioenergy with carbon capture and storage (BECCS) has enormous potential to reduce carbon emissions from the atmosphere that may reach net-negative emissions. This technology may be integrated within the polygeneration system of biomass power plant and green chemicals, such as methanol. This research aims to obtain the system’s overall energy efficiency, the production and CO2 avoidance cost, as well as the emission factor of integrating BECCS in the polygeneration system. The processes of polygeneration system are simulated in Aspen Plus v.11; meanwhile, the CCS unit processes are simulated in Aspen HYSYS v.11. By varying the electricity production capacities, oil palm empty fruit bunches (OPEFB) are used as fuel for biomass integrated gasification combined cycle (BIGCC) power plant to produce exhaust gas containing CO2, which is captured for the methanol synthesis and CCS. Hydrogen for green methanol synthesis is produced through PEM electrolysis powered by two different renewable energy sources, i.e., solar (PV-PEM) and geothermal energy (GEO-PEM). The environmental aspects are assessed with the life cycle assessment (LCA) with a cradle-to-gate scope, and the economic aspects are analyzed with the levelized cost method. The research shows that the overall system efficiency is higher in the PV-PEM scheme (11.33%) than in the GEO-PEM scheme (7.05%). The BECCS system integrated into the polygeneration system exhibits negative emissions (-1.00 to -0.76 kg CO2eq/kWh). The emission value for the methanol synthesis with the PV-PEM scheme (-1.14 to -1.28 kg CO2eq/kg MeOH) is higher than that with the GEO-PEM (-1.52 to -1.65 kg CO2eq/kg MeOH). The 30,87 MW-capacity BIGCC has a higher production cost and CAC value (0.181 USD/kWh and 67.66 USD/ton CO2) than the 50-MW capacity (0.139 USD/kWh and 56.06 USD/ton CO2). The PV-PEM scheme results in higher methanol production costs (1,011-1,049 USD/ton) than of the GEO-PEM scheme (967-1,005 USD/ton)."
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library