Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 3 dokumen yang sesuai dengan query
cover
Teddy
"Proses pembuatan jadwal kuliah merupakan kegiatan yang panjang, membosankan, serta membutuhkan waktu dan pemikiran yang cukup besar jika dilakukan secara manual. Penyelesaian masalah penjadwalan kuliah secara otomatis dengan bantuan komputer dapat mengurangi waktu dan tenaga dalam membuat jadwal kuliah dan memperkecil terjadinya kesalahan yang disebabkan human error.
Genetic algorithm (GA) merupakan salah satu algoritma local search yang bekerja dengan memori yang kecil dan sering kali dapat menemukan solusi yang masuk akal dalam state space yang sangat besar yang tidak bisa ditemukan oleh algoritma yang sistematik sehingga cocok digunakan untuk menyelesaikan masalah penjadwalan kuliah. Penjadwalan kuliah adalah masalah yang multiobjective karena banyak aspek yang menentukan baik buruknya suatu jadwal kuliah. Oleh karena itu, pada tugas akhir ini digunakan algoritma multiobjective SPEA2.
Dalam tugas akhir ini, masalah penjadwalan kuliah dimodelkan sebagai constraint satisfaction problem, lalu diselesaikan dengan GA. Terdapat hard constraint dan soft constraint dalam penjadwalan kuliah. Setiap constraint dianggap sebagai satu fungsi objektif yang mempengarui nilai fitness individu. Pada eksperimen yang dilakukan, digunakan variasi: 1) ukuran test case: kecil, sedang, besar gasal, besar genap, 2) algoritma multiobjective: SPEA2 dan aggregation based, 3) 4 representasi chromosome, 4) GA parameter: populasi, archive size, crossover type, dan mutation rate, 5) constraint aktif.
Dari hasil eksperimen, GA dapat menyelesaikan penjadwalan kuliah dengan baik karena pada hampir semua test case yang dicobakan, GA dapat menghasilkan jadwal yang memenuhi semua constraint yang ada. Selain itu, mengenai parameter GA untuk masalah penjadwalan kuliah dapat disimpulkan: algoritma multiobjective SPEA2 lebih baik dari aggregation based, populasi semakin besar semakin baik, archive size yang ideal adalah 50% dari jumlah populasi, mutation rate sangat tergantung dari panjang genome.

The process of creating a university timetable is a long and tedious work that needs much time and energy if it is done manually. Solving university timetabling problem automatically with a computer not only can reduce time and energy but also prevent human error.
Genetic algorithm (GA) is one of local search algorithm that requires little memory and can often find a reasonable solution in a very big state space search which can not be found by systematic search algorithms. Therefore, it is useful for solving timetabling problem. Timetable scheduling is a multiobjective problem because there are many aspects that determine whether a schedule is good or bad. Because of that, in this research, multiobjective algorithm SPEA2 is used.
In this reasearch, timetabling problem is represented as a constraint satisfaction problem, then solved with GA. There are hard constraints and soft constraints in university timetabling problem. Each constraint is considered as an objective function that affect fitness value of an individual. In the experiment conducted, the variation used are: 1) test case size: small, medium, large odd, large even, 2) multiobjective algorithm: SPEA2 and aggregation based, 3) four different chromosome representations, 4) GA parameters: population, archive size, crossover type, and mutation rate, 5) active constraints.
From the results of the experiment, GA can successfully solve timetabling problems because in almost all the test cases tried, GA can generate schedules that satisfy all the constraints. In addition, conclusions about the GA parameters for the timetabling problem are: multiobjective algorithm SPEA2 is better than aggregation based, the greater the population the better, the ideal archive size is 50% of the population, mutation rate is highly dependent on the length of the genome."
Depok: Fakultas Ilmu Komputer Universitas Indonesia, 2009
S-Pdf
UI - Skripsi Open  Universitas Indonesia Library
cover
Agung Satrio Wibowo
"Penelitian berfokus pada analisis penerapan double stage absorption system untuk meningkatkan kinerja Pembangkit Listrik Tenaga Panas Bumi Kamojang Unit V. Panas yang diambil berasal dari abandoned well sekitar Kamojang yang masih memiliki tekanan 400 kPa. Terdapat beberapa analisis yang dilakukan yaitu analisis exergy pada kondisi operasi, optimasi efisiensi exergy, optimasi biaya dan optimasi multi objektif. Perhitungan dilakukan dengan program Matlab, dan optimasi optimtool. Tekanan operasi saat ini menghasilkan efisiensi exergy 44.93. Optimasi single objektif sistem gabungan menghasilkan efisiensi exergy sebesar 52.66 , biaya 3558400. Optimasi single objektif biaya menghasilkan exergy 51.55 dengan biaya 2514000 dan Optimasi objektif menghasilkan efisiensi 48.64 dengan biaya 2913700 dengan parameter optimum tekanan scrubber 782.64 kPa, beda temperatur air pendingin 3.12°C, temperatur evaporator 7.6°C, temperatur desorber 120.08°C, temperatur condenser 44.9°C, temperatur absorber 43.79°C.

This study focusses on implementation of double stage absorption to improve performance of Kamojang 5 GPP rsquo s. Heat recovery used for optimization, utilized from abandoned well that still have 400 kPa saturation pressure. There are several optimization conducted in this study, there are exergetic efficiency, annual cost, and multi objective optimization. Calculations are conducted by using MATLAB, and optimtool function. The wellhead pressure operational condition has exergetic efficiency 42.4. Exergetic optimization of integrated system has 54.7 exergetic efficiency and system cost 3558400. Economic optimization has exergetic efficiency 44.3 and system cost 2598100. While, multiobjective optimization has exergetic efficiency 51.9 and system cost 2861900 with optimum parameters scrubber pressure 782.64 kPa, temperatur delta of cooling water 3.12°C, evaporator temperature 7.6°C, desorber temperature 120.08°C, condenser temperature 44.9°C, and absorber temperature 43.79°C."
Depok: Fakultas Teknik Universitas Indonesia, 2017
S68287
UI - Skripsi Membership  Universitas Indonesia Library
cover
Situmorang, Susanto Berlin Manarua
"Penelitian ini berfokus pada analisis dari konstruksi Pembangkit Listrik Tenaga Panas Bumi di Wilayah Kerja Panas Bumi WKP Tulehu. Salah satu sumur yang telah diuji di WKP Tulehu memproduksi fluida panas bumi dengan karakteristik low-medium enthalpy 130-165oC, low wellhead pressure 300-700 kPa, dan low mass flow rate 16,67-25 kg/s, dimana karakteristik tersebut sangat sesuai untuk diutilisasi dengan tipe binary power plant. Pembangkit listrik binary secara umum terdiri atas dua tipe Organic Rankine Cycle,yang menggunakan hidrokarbon sebagai fluida kerja, dan Kalina Cycle System, yang menggunakan campuran ammonia-air sebagai fluida kerja. Penelitian ini akan berfokus pada optimasi multiobjektif terhadap tipe pembangkit listrik binary yang paling sesuai dengan kondisi fluida panas bumi tersebut. Objektif yang akan dimasukkan dalam optimasi ini adalah Exergy Destruction dan Purchased Equipment Cost. Hasil optimasi tersebut kemudian akan digunakan sebagai basis untuk kalkulasi estimasi biaya proyek pembangkit listrik yang dicanangkan. Dengan begitu akan diperoleh tipe pembangkit listrik binary yang paling sesuai untuk digunakan di WKP tersebut. Simulasi dan optimasi dilakukan dengan menggunakan Matlab dan Engineering Equation Solver EES .

This study focuses on simulation and optimization of the binary cycle power plant on Tulehu Geothermal Field. One of the tested well in the field produces geothermal fluid with characteristics such as low to medium temperature 130 165oC, low wellhead pressure 3-7 bar, and low mass flow rate 16,67 ndash 25 kg s, in which those characteristics are suitable for binary cycle power plant. Binary power plant can be categorized into two types, Organic Rankine Cycle, which uses hydrocarbon as its working fluid, and Rankine Cycle System, which uses ammonia water mixture as its working fluid. The study will mainly focuses on the optimization of the types of binary power plant with multiobjectives. Those objectives which will be included are Exergy Destruction and Purchased Equipment Cost. The results then will be used as basis for the estimation of the power plant project total cost. By using those method we will be able to find out the solution to which one of the types that have the best output for possible later use on the geothermal field. The simulation and optimization will be conducted by using Matlab and Engineering Equation Software EES."
Depok: Fakultas Teknik Universitas Indonesia, 2018
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library