Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 12 dokumen yang sesuai dengan query
cover
Ihsan Barran
Abstrak :
Indonesia saat ini sedang berada dalam transisi energi dan memiliki sumber daya alam yang besar terutama sumber radiasi matahari. Hingga saat ini Indonesia mempunyai target kapasitas hingga mencapai 37,15 GW dari Pembangkit Listrik Tenaga Surya (PLTS) yang dibagi tiga jenis, yaitu atap, tanah, dan apung. Simulasi repowering akan dilakukan pada penelitian ini dengan menggunakan dua jenis PLTS atap berkapasitas 1,4 MWp dan 300,56 kWp yang telah beroperasi sejak tahun 2020 dan berlokasi di Jawa Barat. Analisis tekno-ekonomi akan dilakukan pada penelitian ini dan penelitian ini bertujuan untuk menganalisa apakah dengan dilakukanya repowering terhadap kedua PLTS tersebut nilai Levelized Cost of Electricity (LCOE) akan lebih kompetitif.  Saat kedua PLTS didesain dan dibangun nilai LCOE sebesar 0,074 USD/kWh untuk PLTS-1 dan 0,073 USD/kWh untuk PLTS-2, setelah di lakukan simulasi repowering didapat nilai LCOE turun menjadi 0,070 USD/kWh untuk kedua PLTS tersebut. Selain hasil analisis tersebut, penelitian ini juga menganalisa kapan sebaiknya repowering di implementasikan dan membuka peluang bisnis PLTS atap untuk sektor rumah tangga di masa depan menggunakan PV bekas hasil implementasi repowering, dimana nilai LCOE yang didapat sudah sangat kompetitif sebesar 0,03 USD/kWh. ......At this time, Indonesia is at energy transition and has large natural resources, especially solar energy. Indonesia has a target capacity of up to 37.15 GW from Solar Power Plant which is divided into three types, namely roof, ground mount, and floating. Repowering simulation will be carried out in this study using solar rooftop power plants with a capacity of 1.4 MWp and 300.56 kWp which have been operating since 2020, located in West Java. Techno-economic analysis will be carried out in this study and this study aims to analyze whether by repowering these solar rooftop power plant, the Levelized Cost of Electricity (LCOE) value will be more competitive. When these solar power plant were designed and built, the LCOE value was 0.074 USD/kWh for PLTS-1 and 0.073 USD/kWh for PLTS-2, after the repowering simulation, the LCOE value fell to 0.070 USD/kWh for both of solar rooftop power plant. In addition, the results of this study also analyzes when repowering was implemented, it opens up solar rooftop power plant business opportunities for the household sector in the future using PV used from the repowering implementation, where the LCOE value obtained is very competitive at 0.03 USD/kWh.
Jakarta: Fakultas Teknik Universitas Indonesia, 2021
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Asep Saepullah
Abstrak :
Transisi menuju energi bersih menjadi topik penting presidensi Indonesia pada G20 sebagai komitmen pengembangan energi terbarukan. Kebutuhan listrik yang terus meningkat membutuhkan diversifikasi energi melalui peningkatan kapasitas energi terbarukan untuk mengurangi ketergantungan pada pembangkit listrik berbasis fosil. Kementrian Energi dan Sumber Daya Mineral memperkirakan Indonesia memiliki potensi berbagai jenis biomassa sebanyak 32.6 GW. Studi ini melakukan analisis ekonomi terhadap PLTBm Bambu berteknologi gasifikasi dengan kapasitas 2600 kW. Parameter ekonomi digunakan seperti Net Present Value (NPV), Internal Rate of Return (IRR) dan Payback Period (PP). Selanjutnya, analisis dampak risiko menggunakan metode Value at Risk. Hasil menunjukan bahwa PLTBm Bambu memperoleh nilai NPV dan IRR sebesar $3,619,460 dan 16.15% dengan waktu pengembalian modal selama 8.98 tahun. Risiko pada kategori tinggi yang teridentifikasi adalah fluktuasi harga bambu, unplanned shutdown, perubahan tarif Power Purchase Agreement (PPA) dan fluktuasi capacity factor. Simulasi dampak risiko menunjukan PLTBm Bambu masih berpotensi memberikan keuntungan, kecuali pada risiko tarif PPA berkurang secara signifikan. Upaya mitigasi risiko dapat dilakukan melalui kerja sama jangka panjang dengan pemasok, bekerja sama dengan kelompok petani lokal, manajemen pemeliharaan yang efektif dan pelatihan kepada operator untuk meningkatkan kemampuan pengoperasian dan pemeliharaan fasilitas. Teknologi ini memberikan masa depan menjanjikan sebagai sumber energi listrik dan menawarkan manfaat ekonomi dan lingkungan bagi masyarakat. ......The energy transition has become an important topic for Indonesia's presidency at the G20 as a commitment to developing renewable energy. The growth of electricity demand requires energy diversification through increasing renewable energy capacity to reduce dependence on fossil-based power generation. The Ministry of Energy and Mineral Resources estimates that Indonesia has various types of potential biomass as much as 32.6 GW. This study conducts an economic analysis of a 2600 kW bamboo biomass power plant with gasification technology. Several financial parameters such as net present value (NPV), internal rate of return (IRR), and payback period (PP) are used to evaluate the economics of the bamboo biomass power plant. Risk impact analysis is carried out using the Value at Risk method. The results show that the bamboo biomass power plant offers a net present value of $3,619,460 and an internal rate of return of 16.15% with a payback period of 8.98 years. The highest risk identified is bamboo price fluctuations, unplanned shutdown, changes in power purchase agreement (PPA) rate, and capacity factor fluctuation. The risk impact simulation shows that the bamboo biomass power plant still has economic potential unless the PPA rate is decreased significantly. Risk mitigation can be carried out through long-term cooperation with suppliers, working with local farmer groups, effective maintenance management, and conducting employee training to improve facility operation and maintenance capabilities. The bamboo biomass power plant provides a promising future for electrical energy dan offers economic and environmental benefits for communities
Depok: Fakultas Teknik Universitas Indonesia, 2022
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Akbar Yusa Putra
Abstrak :
Pulau Seram merupakan salah satu dari ribuan pulau yang ada di Indonesia. Karena kondisi geografis, sistem kelistrikan di Pulau Seram masih isolated hingga saat ini. Berdasarkan Rencana Usaha Penyediaan Tenaga Listrik (RUPTL) 2019-2028, terdapat rencana pengembangan sistem interkoneksi 150 kV di Pulau Seram dan beberapa pembangkit skala menengah. Namun demikian, pertumbuhan beban yang rendah menyebabkan reserve margin di Pulau Seram akan menjadi sangat tinggi hingga melebihi 100%. Dengan kondisi ini, rencana pengembangan sistem ketenagalistrikan di Pulau Seram berpotensi tidak optimal secara tekno-ekonomi. Penelitian ini akan menganalisis pengembangan sistem isolated sebagai alternatif terhadap rencana pengembangan sistem interkoneksi 150 kV untuk mendapatkan alternatif terbaik yang dapat diterapkan di Pulau Seram. Kedua alternatif ini akan dibandingkan secara tekno-ekonomi. Analisis teknis dilakukan dengan menggunakan software ETAP untuk mengevaluasi kualitas sistem, sedangkan analisis ekonomi dilakukan dengan menghitung beberapa parameter finansial serta faktor penentu yaitu nilai Levelized Cost of Electricity (LCOE). Hasil analisis menunjukkan bahwa nilai LCOE sistem isolated berada di bawah BPP Pembangkitan Pulau Seram saat ini yaitu 20,85 cents USD/kWh, serta dapat menghasilkan kualitas sistem yang baik sesuai ketentuan grid code. ...... Seram Island is one of the thousand islands in Indonesia. Due to geographical condition, the power system in Seram Island is currently remain isolated. However, based on Electricity Power Supply Business Plan (RUPTL) 2019-2028, there are power system development plan including 150 kV interconnected grid and several medium-sized power plant in this island. Unfortunately, as demand growth is low, reserve margin in related system tend to be very high, which will be exceeding 100%. With this circumstance, the development plan based on RUPTL 2019-2028 will not be viable both technically and economically. This study will analyze isolated system development as an alternative to high voltage interconnected grid in order to perceive optimum configuration for Seram Island. These two alternatives will be compared both technically and economically. Technical analysis will be conducted using software ETAP to investigate power quality. For economical analysis, several economics parameter will be evaluated as well as Levelized Cost of Electricity (LCOE) to perceive the most economically viable alternative. The result shows that isolated system yield lower LCOE than existing generation cost in Seram Island that is 20,85 cents USD/kWh, as well as complying the grid code requirement.
Depok: Fakultas Teknik Universitas Indonesia, 2020
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Alya Hafiza Vivadinar
Abstrak :
Pada penelitian ini, dilakukan analisis aspek teknis, lingkungan, dan ekonomi pada proses produksi Hydrogenated Vegetable Oil (HVO) dengan hidrogen dari Steam Methane Reforming (SMR), Gasifikasi Biomassa (BG), Elektrolisis dengan Pembangkit Listrik Panas Bumi (GEO-E), dan Elektrolisis dengan Pembangkit Listrik Panel Surya (PV-E). Tujuan dari penelitian ini adalah mendapatkan efisiensi energi, faktor emisi, serta biaya produksi HVO dari teknologi hidrogen yang berbeda-beda. Seluruh teknologi disimulasikan menggunakan Aspen Plus® dengan fluid package Peng-Robinson. HVO diproduksi menggunakan dua reaktor, yaitu reaktor hydrotreating dan reaktor hidroisomerisasi dan menghasilkan tiga produk, yaitu HVO, green naphtha, dan bio-jet fuel. Proses produksi hidrogen menggunakan BG menggunakan bahan baku empty fruit bunch (EFB). Sedangkan pasokan listrik untuk elektrolisis didapat dari GEO-E dengan sitem kombinasi ORC dan Flash. Pasokan listrik untuk elektrolisis dengan PV-E dilengkapi dengan baterai. Analisis teknik dilakukan dengan menghitung efisiensi energi produksi HVO. Analisis ekonomi dilakukan dengan menghitung biaya produksi HVO dengan metode Levelised Cost of Energy (LCOE). Analisis lingkungan dilakukan dengan menghitung emisi CO2-e dengan metode Life Cycle Analysis. Hasil analisis memperlihatkan bahwa produksi HVO dengan efisiensi terbaik didapat dari hidrogen hasil SMR dengan efisiensi 55,67%, yang diikuti oleh BG (31,47%), PV-E (9,34%), dan GEO-E (7,89%). LCOE terendah juga masih membutuhkan produksi hidrogen dari SMR dengan LCOE sebesar $15,79/GJ-HVO, yang diikuti oleh BG ($16,37/GJ-HVO), GEO ($22,83/GJ-HVO), dan PV ($27,29/GJ-HVO). Akan tetapi, produksi HVO yang paling ramah lingkungan menggunakan GEO-E sebagai teknologi produksi hidrogen dengan faktor emsisi sebesar 1,63 kgCO2-e/kg HVO, yang diikuti oleh PV-E (1,86 kgCO2-e/kg HVO), SMR (5,57 kgCO2-e/kg HVO), dan BG (16,52 kgCO2-e/kg HVO). ......Study is done from the perspective of technicality, environment, and economical for Hydrogenated Vegetable Oil (HVO) production with hydrogen from Steam Methane Reforming (SMR), Biomass Gasification (BG), Geothermal Electrolysis (GEO-E), and Solar Photovoltaic Electrolysis (PV-E). The purpose of this study is to evaluate the energy efficiency, emission factors, and cost production of HVO production from various hydrogen production technologies, mentioned above. Every production technology is simulated using Aspen Plus® using the Peng-Robinson fluid package. HVO is produced by two reactors, which are hydrotreating reactor and hydroisomerisastion reactor. The process produces three main products, HVO, green naphtha, dan bio-jet fuel. Feedstock to produce hydrogen from BG is Empty Fruit Bunch (EFB). Electricity production via geothermal for electrolysis uses combination of Organic Rankine Cycle (ORC) and flash system. While the electricity produced using Solar Photovoltaic is equipped with battery. Technical analysis is done by calculating the energy efficiency from overall system energy flow. Production cost is calculated using the Levelised Cost of Energy (LCOE) to analyse the economical aspect. CO2-e emission is determined using the Life Cycle Analysis (LCA) method to analyse the environmental aspect. Study has shown that HVO production with SMR as the hydrogen production technology has the highest energy efficiency (55,67%), which then followed by BG (31,47%), PV-E (9,34%), and GEO-E (7,89%). The lowest LCOE can be obtained if the hydrogen is obtained from SMR aswell (15,78/GJ-HVO), which is followed by BG ($16,37/GJ-HVO), GEO ($22,83/GJ-HVO), and PV ($27,29/GJ-HVO). However, HVO production with the lowest emission factor is equipped with GEO-E (1,63 kgCO2-e/kg HVO), which followed by PV-E (1,86 kgCO2-e/kg HVO), SMR (5,57 kgCO2-e/kg HVO), and BG (16,52 kgCO2-e/kg HVO).
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fitria Yuliani
Abstrak :
Manajemen Tenaga Listrik dan Energi Judul : Analisis Skenario Optimasi Pemanfaatan Energi Listrik Tenaga Surya pada Sektor Industri Pembangkit listrik berbasis energi terbarukan diperkirakan akan meningkat secara signifikan di tahun-tahun kedepan. Pada tahun 2025, Pemerintah menetapkan target pengembanganenergi terbarukan ET sebagai energi primer sebesar 23 dengan persentase pembangkit listrik berbasis energi terbarukan sebesar 40 atau sekitar 45 GW.Permintaan tenaga listrik sektor industri merupakan kedua terbesar setelah sektor rumah tangga, yaitu sekitar 35 dari total permintaan energi final. Tujuan dari penelitian ini adalah untuk menganalisis skenariooptimasi biaya pemanfaatan listrik berbasis energi surya PV Rooftop pada sektor industri, sehingga keputusan untuk mengintegrasikan PV Rooftop dengan industri dapat menjadi solusi bagipenyediaan energi secara mandiri dan meningkatkan nilai tambah industri tersebut. Penelitian ini menggunakan pengembangan perhitungan Levelized Cost of Electricity LCOE , dan analisis kelayakan keekonomian pada PV Rooftop terintegrasi pada industri melalui perhitungan Net Present Value NPV penghematan listrik dengan skenario skema Net Metering dan Net Bilingdengan mempertimbangkan kapasitas PV rooftop terpasangdankecenderungan tarif listrik PT PLN di Industri dengan menggunakan aplikasi System Advisor Model SAM. PV rooftop pada industri akan menghasilkan nilai pengembalian investasi positif melalui skema Net Metering. Hal ini ditunjukkan dengan nilai NPV positif sebesar 69.076 dan Payback period selama 8 tahun. NPV ini didapatkan dari hasil penghematan biaya listrik yang dihasilkan tanpa sistem PV. Semakin besar kapasitas PV terpasang semakin besar nilai NPV. Namun, kapasitas PV terpasang dibatasi oleh luas lahan tersedia daneconomic value biaya sistem PV. Kata kunci: Energi terbarukan,PV Rooftop,Industri, Levelized Cost of Electricity LCOE , Kelayakan Keekonomian ?
Study Program Electicity Power and Energy Management Title Optimization Scenario Analysis of Solar PV Utilization in Industrial Sector Renewable energy power generation is expected to increase significantly in the years to come. In 2025, the Government sets a target of renewable energy development as primary energy by 23 with a percentage of renewable energy based power generation of 40 or about 45 GW. The demand for industrial power is the second largest after the household sector, which is about 35 of the total final energy demand. The objective of this research is to analyze the optimized cost scenario of solarpv utilization PV Rooftop in industrial sector, so that the decision to integrate the Rooftop PV with the industry can be a solution for independent energy supply in some areas and increase the added value of the industry. This research uses the development of Levelized Cost of Electricity LCOE calculation, and economic feasibility analysis on PV Rooftop integrated in industry through Net Present Value NPV electricity saving calculation with Net Metering and Net Biling scheme scenario taking into account the installed rooftop PV capacity and tariff trend electricity PT PLN in the industry by using the application System Advisor Model SAM. PV rooftop in the industry will generate positive returns on investment through the Net Metering scheme. This is indicated by a positive NPV value of 69,076 and a payback period of 8 years. This NPV is obtained from the resulting electricity cost savings without PV system. The larger the installed PV capacity the greater the NPV value. However, the installed PV capacity is limited by the available land area and the economic value of PV system costs. Keywords Renewable Energy, Rooftop PV, Industry, Levelized Cost of Electricity LCOE , Economic Feasibility.
Depok: Fakultas Teknik Universitas Indonesia, 2018
T49068
UI - Tesis Membership  Universitas Indonesia Library
cover
Rizky Fajar Adiputra
Abstrak :
Sebagai perusahaan negara yang memiliki tugas melistriki nusantara PT PLN Persero harus memenuhi penyediaan energi listrik secara efisien. Akhir tahun 2014 dicanangkan Program Nasional untuk memperkuat sistem listrik di Indonesia melalui program 35.000 MW. Rencana Usaha Penyediaan Tenaga Listrik RUPTL 2018-2027 menyebutkan sebesar 22,2 perencanaan pembangunan pembangkit listrik baru adalah pembangunan pembangkit dengan menggunakan gas sebagai energi primer. Diperlukan jenis pembangkit gas yang tepat untuk dibangun berdasarkan pola operasi pembangkit, sehingga akan menghasilkan pembangkit yang beroperasi secara efisien. Untuk mendapatkan efisiensi dan nilai ekonomi dari pengembangan pembangkit listrik gas yang tepat, digunakan metode perhitungan Levelized Cost of Electricity LCOE yang dihitung berdasarkan Net Present Value NPV selama umur operasi pembangkit gas, dengan memperhitungkan biaya investasi, biaya operasi, biaya pemeliharaan dan biaya penyediaan bahan bakar. Penggunaan pembangkit listrik mesin gas dengan tipe siklus terbuka untuk pola operasi pemikul beban puncak peaker menghasilkan biaya penyediaan energi listrik sebesar 1,976.84 IDR/kWh dapat menghemat biaya penyediaan energi listrik PLN sampai dengan sebesar Rp 15 Miliar per tahun. Penggunaan pembangkit listrik turbin gas dengan tipe siklus terbuka untuk pola operasi pemikul beban sistem load follower menghasilkan biaya penyediaan energi listrik sebesar 1,209.24 IDR/kWh dapat menghemat biaya penyediaan energi listrik PLN sampai dengan sebesar Rp 16 Miliar per tahun. Penggunaan pembangkit listrik turbin gas dengan tipe siklus gabungan untuk pola operasi pemikul beban dasar base load menghasilkan biaya penyediaan energi listrik sebesar 1,021.35 IDR/kWh dapat menghemat biaya penyediaan energi listrik PLN sampai dengan sebesar Rp 73 Miliar per tahun.
As a state owned enterprises that has an assignment to electricity whole Indonesia, PT PLN Persero should meet the provision of electric energy efficiently. The end of 2014 is the National Program to strengthen the electricity system in Indonesia through the 35,000 MW program. Rencana Usaha Penyediaan Tenaga Listrik RUPTL 2018 2027 mentions 22.2 of the planned development of new power plants is the construction of power plants using gas as primary energy. The right type of gas power plant is needed to build on the operating mode of the plant, thus generating efficiently operated plants. To obtain the efficiency and economic value of the development of the appropriate gas power plant, the calculated Levelized Cost of Electricity LCOE calculated based on the Net Present Value NPV over the life time of the gas power plant operation, taking into account investment costs, operating costs and maintenance costs as well fuel costs. The use of open type gas engine power plants for peak load operation mode resulted in a cost of electricity supply of 1.976,84 IDR kWh can save PLN 39 s electricity supply costs up to Rp 15 billion per year. The use of a gas turbine power plant with an open cycle type for the load follower operating mode generates a cost of electricity supply of 1.209,24 IDR kWh can save PLN 39 s electricity supply costs up to Rp 16 billion per year. The use of gas turbine power plant with combined cycle type for base load mode generates electricity cost of 1.021,35 IDR kWh can save PLN electricity supply cost up to Rp 73 Billion per year.
Depok: Fakultas Teknik Universitas Indonesia, 2018
T51527
UI - Tesis Membership  Universitas Indonesia Library
cover
Desti Octavianthy
Abstrak :
Indonesia yang memiliki jumlah kota sebanyak 93 kota yang tersebar di banyak provinsi merupakan konsumen energi terbesar di Asia Tenggara yaitu sebesar 36% dari kebutuhan energi kawasan. Selain tingginya permintaan energi, isu lain yang krusial adalah tingginya produksi limbah di Indonesia, terutama pada daerah perkotaan. Penelitian ini dilakukan untuk memperoleh skema teknologi Waste to Energy (WtE) yang dapat diaplikasikan dan paling optimum dalam menghasilkan LCOE dan emisi GHG yang minimum melalui optimisasi multi objektif. Teknologi yang digunakan di dalam penelitian ini adalah insinerasi, gasifikasi, anaerobic digestion, dan pirolisis dengan teknologi pembangkitan listrik menggunakan gas engine, gas turbin, serta teknologi fuel cell, yakni Solid Oxide Fuel cell (SOFC) dan Molten Carbonate Fuel cell (MCFC). Produksi bahan bakar hidrogen untuk fuel cell menggunakan proses Reforming. Penelitian dilakukan dengan meninjau aspek teknis melalui simulasi produksi listrik dari limbah padat perkotaan di kota Depok dengan menggunakan software ASPEN PLUS. Dari aspek lingkungan, dilakukan analisis faktor emisi yang dihasilkan dari berbagai teknologi proses WtE melalui metode Life Cycle Assessment (LCA). Dari segi ekonomi, dilakukan perhitungan Levelized Cost of Electricity (LCOE) WtE. Emisi total dan LCOE merupakan fungsi objektif pada optimisasi multi objektif yang dilakukan dengan menggunakan software General Algebraic Modelling System (GAMS). Hasil penelitan menunjukkan bahwa teknologi digesti anaerob dengan turbin gas sebagai teknologi pembangkitan merupakan teknologi WtE yang optimum pada tahun 2020-2035. Pada tahun 2035 hingga tahun 2050, teknologi gasifikasi dengan SOFC merupakan teknologi yang optimum dari segi teknis, ekonomi, maupun lingkungan. Penelitian ini diharapkan mampu menjadi inspirasi dan membawa pengaruh terhadap perbaikan sistem konversi limbah menjadi energi yang ada di kota Depok. ......Indonesia, which has a total of 93 cities in many provinces, is the largest energy consumer in Southeast Asia, around 36% of the region`s energy needs. Besides the high demand for energy, another crucial issue is the high production of waste in Indonesia, especially in urban areas. This research was carried out to obtain the Waste to Energy (WtE) technology scheme that can be applied and optimum in producing minimum LCOE and GHG emissions through multi-objective optimization. The technologies used in this study are incineration, gasification, anaerobic digestion, and pyrolysis with power generation technology which using gas engines, gas turbines, and fuel cell technology, namely Solid Oxide Fuel cell (SOFC) and Molten Carbonate Fuel cell (MCFC). The production of hydrogen fuel for fuel cells uses the Reforming process. The study was conducted by reviewing the technical aspects through simulating electricity production from municipal solid waste in Depok using the ASPEN PLUS software. From the environmental aspect, emission factor analysis was produced from various WtE process technologies through the Life Cycle Assessment (LCA) method. From an economic standpoint, Levelized Cost of Electricity (LCOE) of WtE is calculated. Total emissions and LCOE are objective functions in multi-objective optimization that carried out using General Algebraic Modeling System (GAMS) software. The research results show that anaerobic digestion technology with gas turbines as generation technology is the optimum WtE technology in 2020-2035. In 2035 until 2050, gasification technology with SOFC is the optimum technology from the technical, economic and environmental aspects. This research is expected to be able to inspire and influence the improvement of waste conversion into energy systems in the city of Depok.This research is expected to be able to inspire and influence the improvement of the waste conversion into energy systems in Depok.
Depok: Fakultas Teknik Universitas Indonesia, 2019
T53968
UI - Tesis Membership  Universitas Indonesia Library
cover
Naufal Muflih Ramadhon
Abstrak :
Transesterifikasi adalah reaksi kimia yang digunakan untuk mengubah minyak hewani menjadi biodiesel yang dapat digunakan. Pada penelitian ini, bahan bakar biodiesel disintesis dari lemak sapi dalam reaktor menggunakan katalis CaO yang disintesis dari cangkang telur bebek. Katalis CaO berbasis limbah disintesis dari cangkang telur bebek melalui proses kalsinasi pada suhu 900 OC selama 2 jam. Transesterifikasi dilakukan pada suhu 55 OC pada 6 sampel dengan variasi penggunaan jumlah katalis (1.5 wt%, 6.5 wt%, dan 10 wt%) serta variasi katalis CaO komersial dan limbah. Katalis yang disintesis dari cangkang telur itik menghasilkan kadar Kalsium Oksida (CaO) sebesar 93.2%. Hasil pengujian sampel terbaik diperoleh untuk biodiesel dengan katalis 6.5% berbahan dasar limbah dan 10% katalis komersial. Untuk biodiesel dengan katalis berbasis limbah 6.5%, rendemen 90.75%, densitas 855.1 kg/m3, viskositas 5.73 mm2/cst, keasaman 1.69 mg-KOH/g, dan bilangan yodium 30.87 g-I2/100g. Untuk biodiesel dengan katalis berbasis limbah 10%, rendemen 90.81%, densitas 860.5 kg/m3, viskositas 6.52 mm2/cst, keasaman 2.03 mg-KOH/g, dan bilangan yodium 27.51 g-I2/100g. Angka keasaman standar tidak tercapai dimana maksimumnya adalah 0.5 mg-KOH/g. ......Transesterification is a chemical reaction used to convert animal oils into usable biodiesel. In this study, biodiesel fuel was synthesized from beef tallow in a reactor using a CaO catalyst which also synthesized from duck eggshells. Waste-based CaO catalyst synthesized from duck eggshells through a calcination process at 900 OC for 2 hours. Transesterification carried out at a temperature of 55 OC on 6 samples with variations in the use of the amount of catalyst (1.5 wt%, 6.5 wt%, and 10 wt%) as well as variations of commercial and waste based CaO catalysts. The catalyst synthesized from duck eggshells obtained a yield of 93.2% amount of Calcium Oxide (CaO). The synthesized biodiesel also tested for its chemical and physical properties to fulfill the Indonesian National Standard (SNI). The best sample test results were obtained for biodiesel with 6.5% catalyst from waste-based and 10% catalyst from commercial. For biodiesel with 6.5% waste-based catalyst, 90.75% yield, 855.1 kg/m3 density, 5.73 mm2/cst viscosity, 1.69 mg-KOH/g acidity, and 30.87 g-I2/100g iodine number. For biodiesel with 10% waste-based catalyst, 90.81% yield, 860.5 kg/m3 density, 6.52 mm2/cst viscosity, 2.03 mg-KOH/g acidity, and 27.51 g-I2/100g iodine number. The standard acidity number is not reached where the maximum is 0.5 mg-KOH/g.
Depok: Fakultas Teknik Universitas Indonesia, 2023
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Maghvira Nazhwa Manik
Abstrak :
Pengelolaan limbah padat perkotaan merupakan tantangan besar di banyak kota besar di seluruh dunia. Salah satu teknologi yang menawarkan solusi inovatif untuk pengelolaan limbah adalah teknologi gasifikasi. TPA Cipayung menghadapi tantangan kapasitas yang berlebih dengan volume sampah harian sebesar ±930 ton. Penelitian ini mengevaluasi efisiensi teknis dan ekonomi penerapan teknologi gasifikasi dalam pengelolaan limbah padat. Simulasi proses menggunakan perangkat lunak Aspen Plus akan diterapkan untuk menganalisis produksi syngas dari limbah. Selain itu, levelized cost of electricity (LCOE) akan digunakan untuk mengevaluasi kelayakan ekonomi proyek ini. Hasil simulasi menunjukkan bahwa gasifikasi dapat mengurangi limbah secara signifikan yaitu sebanyak 435 ton sampah low value per hari dan menghasilkan syngas dengan nilai 3911 kJ/kg serta cold gas efficiency (CGE) sebesar 17%. Syngas yang dihasilkan dapat dikonversi menjadi energi listrik berkapasitas 5 MW. Efisiensi tinggi dalam pengurangan limbah dan produksi energi listrik menunjukkan bahwa teknologi gasifikasi merupakan solusi yang layak untuk TPA Cipayung. Analisis ekonomi menunjukkan nilai LCOE untuk listrik yang diproduksi dari PLTSa TPA Cipayung sebesar 520 rupiah/kWh atau 0,04 USD/kWh. Hasil penelitian ini diharapkan dapat menjadi referensi bagi kota-kota lain yang menghadapi tantangan serupa dalam pengelolaan limbah padat. Pengembangan lebih lanjut dan penerapan teknologi gasifikasi dapat memberikan dampak positif yang signifikan terhadap lingkungan dan ekonomi secara keseluruhan. ......Municipal solid waste management is a major challenge in many large cities worldwide. One technology that offers an innovative solution for waste management is gasification technology. The Cipayung Landfill faces capacity challenges with a daily waste volume of ±930 tons. This study evaluates gasification technology's technical and economic efficiency in solid waste management. Process simulations using Aspen Plus software will be applied to analyze syngas production from waste. Additionally, the levelized cost of electricity (LCOE) will be used to assess the economic feasibility of this project. The simulation results show that gasification can significantly reduce waste, specifically by 435 tons of low-value waste per day, and produce syngas with an energy value of 3911 kJ/kg and a cold gas efficiency (CGE) of 17%. The resulting syngas can be converted into electricity with a capacity of 5 MW. High waste reduction and energy production efficiency indicate that gasification technology is a viable solution for the Cipayung Landfill. Economic analysis shows an LCOE for electricity produced from the Cipayung WTE plant of 520 rupiahs/kWh or 0.04 USD/kWh. The results of this study are expected to serve as a reference for other cities facing similar challenges in solid waste management. Further development and application of gasification technology can have significant positive impacts on the environment and economy as a whole.
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Andhika Prakasa Anom Putra
Abstrak :
Penelitian ini bertujuan untuk mengetahui bagaimana aspek ekonomi berbagai konfigurasi proses tenaga surya terkonsentrasi diterapkan di Nusa Tenggara. Penggunaan sistem penyimpanan energi diteliti penerapannya terhadap tenaga surya yang dikonsentrasikan karena penggunaannya pada sumber energi yang berselang, seperti energi surya, dinilai mampu mengatasi permasalahan pasokan dan permintaan energi listrik. Sistem tangki ganda (panas dan dingin) menjadi yang konvensional pada tenaga surya terkonsentrasi, sementara tangki jenis termoklin masih berada dalam tahap penelitian.. Penelitian ini akan dilakukan dengan menyimulasikan enam jenis skenario pembangkitan dengan kedua jenis tangki tersebut dan skenario tanpa menggunakan sistem penyimpanan energi. Skenario dilakukan dengan menjalankan siklus termodinamika Rankine dan Brayton. Seluruh data yang berkaitan akan menggunakan data yang tersedia di Nusa Tenggara Timur dengan WACC sebesar 10% dan umur guna proyek selama 25 tahun. Hasil penelitian menyatakan bahwa di penerapan siklus Brayton menghasilkan energi lebih besar, tetapi efisiensi keseluruhannya kecil dibandingkan siklus Rankine. Hal tersebut menuntun kepada lebih besarnya LCOE skenario yang menjalankan siklus Brayton dibandingkan siklus Rankine. Penggunaan tangki jenis termoklin mampu untuk menekan biaya investasi, sehingga sistem yang menggunakan sistem tangki termoklin memperoleh LCOE lebih rendah dibandingkan dengan sistem tangki. Di antara semua jenis skenario, sistem yang menjalankan sistem tangki termoklin dengan siklus Rankine mampu menghasilkan LCOE paling rendah. Hasil LCOE tersebut sebanding dengan LCOE sumber energi lain di Indonesia. ......This study aims to determine how the economic aspects of various configurations of concentrated solar power processes are applied in Nusa Tenggara. The employment of energy storage systems is investigated for its application to concentrated solar power because its use in intermittent energy sources, such as solar energy, is able to overcome problems of supply and demand for electrical energy. The double tank system (hot and cold) is becoming the conventional one on concentrated solar power, while the thermocline type tank is still in the research stage. This research will be carried out by simulating six scenarios by incorporating both types of tanks, without using energy storage systems, and is running with Rankine and Brayton thermodynamic generation cycles. All related data will use Nusa Tenggara Timur availability with WACC of 10% and 25 project lifetimes. The results of the study state that the application of the Brayton cycle produces more energy, yet the overall efficiency is lower than the Rankine cycle. This leads to a larger LCOE of scenarios running the Brayton cycle than the Rankine cycle. The use of a thermocline tank can reduce investment costs so that a system using a thermocline tank system obtains a lower LCOE than the double tank system. Among all types of scenarios, the system with thermocline tank and Rankine cycle were able to produce the lowest LCOE. The results of the LCOE are comparable to the LCOE of other energy sources in Indonesia.
Depok: Fakultas Teknik Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2   >>