Hasil Pencarian  ::  Simpan CSV :: Kembali

"Fosfor (P) adalah salah satu nutrien utama penyebab eutrofikasi di badan air yang dapat memicu terjadinya blooming alga. Masuknya fosfat ke badan air merupakan akibat dari tingginya aktivitas yang menghasilkan limbah domestik, aktivitas pertanian, pertambangan dan penggundulan hutan. Konsentrasi fosfat total yang terukur adalah konsentrasi keseluruhan dari spesi fosfat baik organik maupun anorganik, sementara itu spesi ortofosfat adalah spesi yang berperan penting dalam terjadinya eutrofikasi. Teknik DGT (diffusive gradient in thin film) merupakan salah satu metode yang telah dikembangkan untuk pengukuran spesi fosfat dalam air. Teknik DGT diteliti kemampuannya untuk pengukuran spesi fosfat dalam air dengan binding agent Lantanum-MOF (Metal Organic Framework). Berdasarkan hasil penelitian, Lantanum-MOF dengan luas permukaan 84,957 m2/g dan volume pori 0,090 cc/g diperoleh dengan metode solvotermal menggunakan pelarut DMF/air. Lanthanum-MOF yang diperoleh kemudian dapat digunakan sebagai binding agent pada binding gel La-MOF dalam sistem DGT untuk penyerapan ortofosfat secara selektif untuk H2PO4-. Koefisien difusi DGT La-MOF adalah 2,2156 × _10-6 cm2/s. Perubahan pH dan adanya ion penganggu NO3-, CO32- dan SO42- mempengaruhi penyerapan ortofosfat oleh DGT-La-MOF. Pada pH 4 hingga 7 penyerapan H2PO4- terjadi optimum dengan CDGT/CAwal >1. Pengaruh kuat ion penganggu terhadap penyerapan ortofosfat pada DGT La-MOF secara berturut-turut NO3-> CO32- > SO42-. Dengan meningkatkan berat La-MOF dalam binding gel hingga 50 mg La-MOF dalam 10 mL larutan gel, diperoleh kapasitas penyerapan ortofosfat 93,386 μg P, 14 kali lebih besar dibanding kapasitas penyerapan DGT ferihidrit. DGT La-MOF juga dapat diaplikasikan untuk sampling ex-situ air lingkungan dengan hasil pengukuran konsentrasi fosfat reaktif yang homogen.

---

Phosporus (P) is one of the most nutrient contributors of eutrophication in aquatic system which can trigger algae blooms. The entry of phosphate into the aquatic system is generally caused by the high domestic waste, agricultural activities, mining and deforestation. Total phosphate measurement is the overall concentration of phosphate species both organic and inorganic phosphate, while the orthophosphate species play important role in eutrophication. DGT (diffusive gradient in thin film) is the techniques that has been developed to measure phosphate species in water. The DGT technique is investigated its ability to measure phosphate spesies in water by using Lanthanum-MOF (metal organic frameworks) as binding agent. In this study, Lanthanum MOF with surface area 84.957 m2/g and pore volume 0.090 cc/g was developed by solvothermal method using DMF/water as a solvent. Lanthanum-MOF then used as binding agent of binding gel La-MOF in DGT system for orthophosphate removal, selectively for H2PO4- adsorption. The diffusion coefficient of DGT La-MOF was 2.2156 × _10-6 cm2/s respectively. Change in pH and interfering anions such as NO3-, CO32- dan SO42- affected the orthophosphate uptake on DGT La-MOF. At pH 4 to 7, the optimum uptake of H2PO4- was achieved. The effect of ionic strength for orthophosphate uptake were in the sequence NO3-> CO32- > SO42- . By increasing La-MOF mass in the binding gel, the orthophosphate uptake on DGT La-MOF was up to 93.386 μg P, which 14 times higher than orthophosphate uptake by DGT ferrihydrite. DGT La-MOF was also proofed has good homogeneity for ex situ sampling technique of reactive phosphate."

"Fosfat merupakan nutrien pembatas dalam peristiwa eutrofikasi sehingga dibutuhkan sebuah metode untuk menangani kandungan fosfat berlebih dalam sistem akuatik. Penelitian ini menyajikan optimasi penggunaan debu terbang sebagai adsorben. Debu terbang diberikan pra-perlakuan asam, disintesis dengan menggunakan metode hidrothermal untuk menghasilkan zeolit NaP1 kemudian dimodifikasi dengan menggunakan metode ion exchange menghasilkan zeolit LaP1. Pengaruh ketiga material hasil sintesis terhadap kapasitas adsorpsi diuji pada 5 parameter meliputi variasi konsentrasi adsorben, variasi pH, variasi waktu kontak, variasi konsentrasi fosfat dan variasi suhu. Isoterm adsorpsi Langmuir dan Freundlich dievaluasi untuk mengetahui mekanisme adorpsi pada ketiga material. Zeolit LaP1 merupakan adsorben paling efektif untuk adsorpsi fosfat dengan kapasitas adsorpsi mencapai 46.582 mg g-1 pada jumlah adsorben 0.025 gram, pH 7 dan konsentrasi fosfat 10 mg L-1. Pola kinetika adsorpsi adsorben LaP1 mengikuti kinetika orde semu kedua, sementara pola adsorpsi mengikuti isoterm adsorpsi Langmuir. Kajian termodinamika adsorpsi menghasilkan nilai ΔG yang meningkat, sementara nilai ΔH dan ΔS berturut-turut sebesar 19.62 kJ mol-1 dan 98.33 J K-1 mol-1 menunjukkan bahwa adsorpsi fosfat bersifat spontan dan endotermik.

---

Phosphate is a limiting nutrient in the eutrophication process, so a method is needed to reduce phosphate excess in the aquatic system. This study presents an optimization of the use of fly ash as an adsorbent. Fly ash was treated by acid then synthesized using the hydrothermal method to produce NaP1 zeolite and then using the ion exchange method produce LaP1 zeolite. The effect of the three synthesized materials on the adsorption capacity was tested on 5 parameters including variations in the concentration of adsorbent, variations in pH, variations in contact time, variations in phosphate concentration, and variations in temperature. Langmuir and Freundlich adsorption isotherms were evaluated to determine the mechanism of adsorption in the three materials. Zeolite LaP1 is the most effective adsorbent for phosphate adsorption with an adsorption capacity of 46.582 mg g-1 at 0.025 gram of adsorbent, pH 7, and 10 mg L-1 concentration of phosphate. The adsorption kinetics of LaP1 followed the pseudo-second-order kinetics, while the adsorption pattern followed the Langmuir adsorption isotherm. Thermodynamic studies of adsorption resulted in an increased ΔG value, while the ΔH and ΔS values were 19.62 kJ mol-1 and 98.33 J K-1 mol-1, respectively, indicating that phosphate adsorption was spontaneous and endothermic.

"

"[ABSTRAKPenggunaan gelombang mikro dalam beberapa tahun terakhir ini mengalami peningkatan yang sangat pesat seiring berkembangnya teknologi komunikasi dan informasi. Hal ini menimbulkan masalah baru yakni terjadinya polusi gelombang mikro. Untuk mengimbangi dampak negatif polusi interferensi gelombang elektromagnetik, para peneliti mencoba mengembangkan material penyerap gelombang elektromagnetik. Salah satu material yang menjadi kandidat potensial untuk aplikasi penyerap gelombang mikro adalah material berbasis lantanum manganat. Pada penelitian ini dipelajari rekayasa struktur material berbasis lantanum manganat dengan sistem La0,67Ba0,33Mn1-xNix/2Tix/2O3 (x = 0; 0,02; 0,04 dan 0,06). Fasa tunggal senyawa La0.67Ba0.33Mn1-xNix/2Tix/2O3 berhasil dibuat melalui proses pemaduan mekanik menggunakan prekusor-prekusor La2O3, MnCO3, BaCO3, TiO2, dan NiO dengan tingkat kemurnian tinggi. Selanjutnya serbuk hasil pemaduan mekanik menjalani perlakuan pemanasan pada suhu 1200oC selama 10 jam. Material yang telah dipanaskan kemudian dihaluskan kembali selama 20 jam. Hasil refinement pola difraksi sinar X menunjukkan bahwa senyawa La0,67Ba0,33Mn1-xNix/2Tix/2O3 memiliki strukstur kristal monoklinik untuk seluruh variasi x. Kurva histerisis sampel menunjukkan bahwa material ini termasuk magnet lunak. Hasil evaluasi distribusi ukuran partikel material dengan komposisi terbaik yakni La0,67Ba0,33Mn0,06Ni0,03Ti0,03O3 adalah 82,4 nm. Hasil pengujian sifat serapan gelombang mikro pada rentang 8-12,4 GHz menunjukkan material mampu mereduksi gelombang mikro hingga 94 % pada frekuensi 11,4 GHz. Dengan demikian senyawa La0,67Ba0,33Mn1-xNix/2Tix/2O3 dapat dijadikan sebagai material penyerap gelombang mikro.;

---

ABSTRACTIn recent years, application of microwaves has been increased along with the development of communication and information technology and highly produces electromagnetic wave interference. To solve this problem, scientist tries to develop a new material that could absorb electromagnetic waves. One of potential candidates for absorbing materials is lanthanum manganese-based system. In this research, La0.67Ba0.33Mn1-xNix/2Tix/2O3 (x = 0, 0.02, 0.04, and 0.06) compound were studied as a microwaves absorber materials. Single phase of La0.67Ba0.33Mn1-xNix/2Tix/2O3 were successfully synthesized by mechanical alloying method. The mixture of all precursors were first mechanically milled for 20 hours and then sintered at a temperature of 1200oC for 10 h in which a fully crystalline material is ensured. The sintered materials were then re-milled for 20 hours to obtain powder-based nanoparticle. X-ray diffraction refinement shows that the samples have monoclinic structure at all x compositions. The hysteresis curve evaluation showed that the sample materials is soft magnetic. The best composition of La0.67Ba0.33Mn1-xNix/2Tix/2O3 with x = 0.06 has been evaluated. The compound has 82.4 nm particle size distributions and it is able to absorb up to 94% microwaves at 11.4 GHz. The study concluded the material of La0.67Ba0.33Mn1-xNix/2Tix/2O3 have a good potential to be a candidate of microwaves absorbing materials.;In recent years, application of microwaves has been increased along with the development of communication and information technology and highly produces electromagnetic wave interference. To solve this problem, scientist tries to develop a new material that could absorb electromagnetic waves. One of potential candidates for absorbing materials is lanthanum manganese-based system. In this research, La0.67Ba0.33Mn1-xNix/2Tix/2O3 (x = 0, 0.02, 0.04, and 0.06) compound were studied as a microwaves absorber materials. Single phase of La0.67Ba0.33Mn1-xNix/2Tix/2O3 were successfully synthesized by mechanical alloying method. The mixture of all precursors were first mechanically milled for 20 hours and then sintered at a temperature of 1200oC for 10 h in which a fully crystalline material is ensured. The sintered materials were then re-milled for 20 hours to obtain powder-based nanoparticle. X-ray diffraction refinement shows that the samples have monoclinic structure at all x compositions. The hysteresis curve evaluation showed that the sample materials is soft magnetic. The best composition of La0.67Ba0.33Mn1-xNix/2Tix/2O3 with x = 0.06 has been evaluated. The compound has 82.4 nm particle size distributions and it is able to absorb up to 94% microwaves at 11.4 GHz. The study concluded the material of La0.67Ba0.33Mn1-xNix/2Tix/2O3 have a good potential to be a candidate of microwaves absorbing materials., In recent years, application of microwaves has been increased along with the development of communication and information technology and highly produces electromagnetic wave interference. To solve this problem, scientist tries to develop a new material that could absorb electromagnetic waves. One of potential candidates for absorbing materials is lanthanum manganese-based system. In this research, La0.67Ba0.33Mn1-xNix/2Tix/2O3 (x = 0, 0.02, 0.04, and 0.06) compound were studied as a microwaves absorber materials. Single phase of La0.67Ba0.33Mn1-xNix/2Tix/2O3 were successfully synthesized by mechanical alloying method. The mixture of all precursors were first mechanically milled for 20 hours and then sintered at a temperature of 1200oC for 10 h in which a fully crystalline material is ensured. The sintered materials were then re-milled for 20 hours to obtain powder-based nanoparticle. X-ray diffraction refinement shows that the samples have monoclinic structure at all x compositions. The hysteresis curve evaluation showed that the sample materials is soft magnetic. The best composition of La0.67Ba0.33Mn1-xNix/2Tix/2O3 with x = 0.06 has been evaluated. The compound has 82.4 nm particle size distributions and it is able to absorb up to 94% microwaves at 11.4 GHz. The study concluded the material of La0.67Ba0.33Mn1-xNix/2Tix/2O3 have a good potential to be a candidate of microwaves absorbing materials.]"

"Indonesia merupakan salah satu negara penghasil timah terbesar di dunia. Cadangan timah Indonesia menjadi yang terbesar kedua di dunia setelah Tiongkok dengan total 800 ribu ton. Penambangan timah menghasilkan produk samping berupa mineral pembawa LTJ, yaitu Monasit. Monasit pada penambangan timah di Bangka memiliki kadar 16,41 kg. Pemanfaatan monasit sebagai mineral pembawa LTJ menjadi peluang bagi Indonesia untuk mengekstraksi LTJ di dalamnya karena aplikasi LTJ yang semakin luas. Dekomposisi mekanokimia merupakan salah satu proses yang dapat digunakan untuk melakukan benefisiasi dari mineral monasit. Pencampuran dengan NaOH akan membentuk LTJ-hidroksida yang kemudian dapat menghilangkan pengotor fosfat pada mineral monasit. Serangkaian proses dilakukan pada penelitian ini dengan parameter penambahan 33 wt% NaOH, waktu penggilingan 120 menit, kecepatan penggilingan 650 rpm, temperatur roasting 120 ^oC, waktu roasting 120 menit, temperatur pencucian 70 ^oC, waktu pencucian 30 menit, kecepatan pengadukan 680 rpm, dan pengeringan pada temperatur 120 ^oC selama 120 menit. Variabel bebas dari proses ini adalah ukuran partikel, yaitu +65#, -65# +100#, -100# +140#, -140# +170#, dan -170#. Proses pembentukan pelet dan roasting dilakukan untuk mengubah bentuk LTJ hidroksida menjadi LTJ Oksida. Kemudian, pencucian akan melarutkan pengotor fosfat pada mineral monasit. Pada penelitian ini dilakukan karakterisasi menggunakan SEM-EDS, XRD, dan XRF untuk memberikan informasi mengenai perubahan kadar dari unsur Lantanum dan Yttrium pada mineral monasit. Hasil penelitian ini menunjukkan adanya pembentukan LTJ-oksida setelah proses roasting dan hilangnya senyawa Natrium Fosfat (Na₃PO₄) setelah proses pencucian. Dari kelima ukuran partikel didapatkan nilai %recovery dan grade terbesar dari lantanum adalah 70,08 % dan 1,543% berturut-turut pada ukuran partikel -65#+100#. Sedangkan pada yttrium didapatkan nilai %recovery dan grade terbesar adalah 23,31% dan 1,681% berturut-turut pada ukuran partikel +65#.

---

Indonesia is one of the largest tin-producing countries in the world. Indonesia's tin reserves are the second largest in the world after China with a total of 800 thousand tons. Tin mining produces by-products in the form of rare earth mineral carriers, namely Monasit. Monazite in tin mining on Bangka has a grade of 16.41 kg. The utilization of monazite as a carrier mineral for rare earth is an opportunity for Indonesia to extract rare earth in it due to the wider application of rare earth. Mechanochemical decomposition is one of the processes that can be used to carry out the beneficiation of monazite minerals. Mixing with NaOH will form REE-hydroxide which can then remove phosphate impurities in monazite minerals. A series of processes were carried out in this study with the parameters of adding 33 wt% NaOH, grinding time 120 minutes, grinding speed 650 rpm, roasting temperature 120 ^oC, roasting time 120 minutes, washing temperature 70 ^oC, washing time 30 minutes, stirring speed 680 rpm, and drying at 120 ^oC for 120 minutes. The independent variable of this process is the particle size, namely +65#, -65# +100#, -100# +140#, -140# +170#, and -170#. Roasting and forming pellets processes is chosen to change the form of REE-hydroxide into REE-oxide. Then, washing will dissolve the phosphate impurities in monazite minerals. In this study SEM-EDS, XRD, and XRF is used to provide information about changes in levels of the elements Lanthanum and Yttrium in monazite minerals. The results of this study indicate the formation of REE-oxide after the roasting process and the loss of sodium phosphate (Na₃PO₄) after the washing process. Of the five particle sizes, the highest % recovery and grade values of Lanthanum were 70.08% and 1.543% respectively at particle size -65#+100#. Meanwhile, for Yttrium, the highest % recovery and grade values were 23.31% and 1.681% respectively at +65# particle size."

"Salah satu anoda korban yang paling banyak dipelajari adalah paduan Al-Zn-Sn, yang memiliki efisiensi arus sekitar 70%. Untuk meningkatkan efisiensi anoda korban paduan aluminium, logam tanah jarang seperti lantanum sering ditambahkan. Dari beberapa penelitian, penambahan logam tanah jarang menunjukkan efek yang berbeda, mulai dari peningkatan efisiensi arus hingga sealing effect pada lapisan pasif. Oleh karena itu, diperlukan penelitian lebih lanjut mengenai pengaruhnya terhadap struktur mikro dan sifat korosi dari penambahan lantanum pada salah satu paduan aluminium yang sering digunakan, seperti Al-Zn-Sn. Variasi sampel uji adalah Al-Zn-0.5Sn-xLa dan Al-Zn-1Sn-xLa (x= 0,1; 0,3; 0,5). Sampel akan diuji mikroskop optik, SEM-EDS, polarisasi siklik, EPMA dan EIS. Dari pemetaan unsur dengan EDS dan EPMA, lantanum terdistribusi dalam matriks Al dan presipitat dengan membentuk senyawa intermetalik Al11La3. Hasil OCP menunjukkan penurunan seiring dengan peningkatan lantanum. Hasil OCP sekitar -1,2 V dimana hasil tersebut lebih tinggi dari OCP anoda korban tegangan rendah yaitu -0.85 vs SCE. Dari hasil polarisasi siklik, potensi pitting corrosion terlihat menurun seiring dengan meningkatnya konsentrasi lantanum. Dari hasil EIS, resistansi transfer muatan meningkat seiring dengan penambahan konsentrasi lantanum. Dari hasil pengujian tersebut, paduan Al-Zn-Sn-La tidak dapat diklasifikasikan sebagai anoda korban tegangan rendah.

---

One of the most studied sacrificial anodes is the Al-Zn-Sn alloy, which has a current efficiency of about 70%. To increase the efficiency of aluminium alloy sacrificial anodes, rare earth metals such as lanthanum are often added. From several studies, the addition of rare earth metals shows different effects, from increasing current efficiency until sealing effect on passive layer. Therefore, further research is needed on the effects on microstructure and corrosion properties of adding lanthanum to one of the frequently used aluminium alloys, such as Al-Zn-Sn. The variations of the test samples were Al-Zn-0.5Sn-xLa and Al-Zn-1Sn-xLa (x= 0.1, 0.3, 0.5). The samples were tested for optical microscope, SEM-EDS, EPMA cyclic polarization and EIS. From mapping from EDS and EPMA, lanthanum was distributed in Al matrix and precipitate by forming an intermetallic compound αAl11La3. OCP result shown decreasing as lanthanum increases. OCP result is about -1.2 V that higher than low voltage sacrificial anode OCP (-0.85V vs SCE). From the cyclic polarization result, potential of pitting corrosion was shown decreasing as the lanthanum concentration increased. Charge transfer resistance shown increasing as lanthanum concentration is increasing in EIS result. Therefore, Al-Zn-Sn-La cannot be classified as low voltage sacrificial anode."

"Metal organic framework (MOF) La-PTC berbasis ligan perylene dan logam lantanum disintesis menggunakan metode solvotermal pada suhu 170 °C selama waktu reaksi 24 jam dengan menggunakan pelarut campuran air dan DMF sebanyak 30 mL dengan perbandingan 5:1. MOF La-PTC memiliki karakteristik yang berbeda degan senyawa prekursornya Na4PTC. La-PTC yaitu memiliki nilai energi celah pita 2,25 eV, luas area permukaan 22,2364 m2/g, total volume pori sebesar 0,0685 cm3/g dan ukuran pori 12,3291 nm. Hasil analisis SEM-EDS La-PTC memiliki kandungan atom karbon sebesar 51,8%; oksigen sebesar 28,3% dan lantanum sebesar 19,9%. MOF La-PTC juga memiliki stabilitas termal hingga temperatur 376,27 °C. MOF La-PTC memiliki daya adsorpsi sebesar 22,72%, and 29.70% selama waktu diseprsi 60 menit. MOF La-PTC memiliki aktivitas fotokatalitik terhadap degradasi metil jingga dengan persen efisiensi degradasi sebesar 64,76%, tetapi tidak untuk metilen biru. Penambahan H2O2 meningkatkan aktivitas fotokatalitik MOF La-PTC terhadap degradasi metil orange menjadi 99,60% dan metilen biru menjadi 67,02% dengan waktu penyinaran sinar tampak selama 240 menit. MOF La-PTC dapat digunakan untuk mendegradasi metil jingga sebanyak tiga kali siklus reaksi dengan persen efisiensi degradasi sebesar 62,57% dan metilen biru sebanyak 4 siklus reaksi dengan persen efisiensi degradasi sebesar 77,61% dengan adanya H2O2 dalam sistem.

---

Metal organic framework of lanthanum and perylene ligand was successfully synthesized by solvothermal method. Therefore this study aims to assess the photocatalytic activity of La-PTC metal organic framework, in degradation of methylene blue and methyl under visible light irradiation. The results of the FTIR characterization showed that, MOF La-PTC had a different structure and composition from its precursor (Na4PTC). The MOF La-PTC has a band gap energy value of 2.25 eV and a surface area of 22.2364 m2/g. The SEM-EDS analysis showed an elemental composition of lanthanum, carbon, and oxygen, as 19.9%, 51.8%, and 28.3%, respectively. LMOF La-PTC had good thermal stability up to 376.27 °C. Furthermore, MOF La-PTC was able to adsorb dyes at the optimum degradation efficiency of 22.72%, and 29.70% for MB and MO at the dispersion period of 60 minutes. MOF La- PTC has photo-catalytic activity towards the degradation of methyl orange with the degradation efficienty of 64.26%, in contrast to methylene blue, which do not have this potential under visible light irradiation. The addition of H2O2 to the mixture, caused the increasing of La-PTC photo-catalytic activity from 64.76% to 99.60% for MO and 8.44% to 67.02% for MB. MOF La-PTC degrade methylene blue for four cycles reaction with percent degradation efficiency of 77.61% and three cycles reaction for methyl orange with percent degradation efficiency of 62.57%. Therefore, MOF La-PTC possess the potential of a photo-catalyst material in degrading dyes, under visible light irradiation."

"Paduan aluminium silikon banyak digunakan dalam berbagai aplikasi industri, khususnya industri otomotif. Namun, kehadiran unsur besi dapat menyebabkan terbentuknya senyawa intermetalik yang dapat menurunkan sifat mekanis paduan. Modifikasi senyawa intermetalik dapat dilakukan dengan meningkatkan laju pendinginan dan penambahan unsur tertentu, salah satunya logam tanah jarang. Pada penelitian ini, digunakan simultaneous thermal analysis untuk mengamati pengaruh laju pendinginan terhadap pembentukan fasa intermetalik beta pada paduan AlFe7Si dengan penambahan lantanum sebanyak 0,3%, 0,6%, dan 1%. Mikroskop optik juga digunakan untuk mengamati hasil mikrostruktur dari paduan. Hasil menunjukkan bahwa penambahan La yang optimum adalah pada konsentrasi 0,3% dalam mengurangi ukuran fasa intermetalik beta.

---

Aluminium silicon alloys are widely used in several industrial applications, especially in automotive industry. However, the presence of iron could cause the formation of intermetallic compounds which would reduce the mechanical properties of the alloy. Modification of intermetallic compounds can be done by increasing the solidification rate and adding certain elements, for example, rare earth elements. In this study, simultaneous thermal analysis was used to find out the effect of cooling rate on the formation of beta intermetallic phase in AlFe7Si alloy added with lanthanum at 0,3%, 0,6%, and 1%. Optical microscopy was also used to observe the microstructure of this alloy. Results showed that the optimum addition of lanthanum was at 0,3% to reduce the size of beta intermetallic phase."

"Salah satu unsur logam tanah jarang adalah lantanum. Lanthanum dapat dipisahkan dengan beberapa teknik seperti ekstraksi solven, pertukaran ion, dan metode pengendapan fraksional. Salah satu sumber lantanum adalah mineral pasir silika, dan Indonesia memiliki jumlah pasir silika yang cukup berlimpah sehingga dapat dijadikan potensi produksi lantanum yang tinggi.Pada penelitian ini akan dilakukan ekstraksi lanthanum dari mineral pasir silika. Pemisahan logam lantanum dari pasir silika menggunakan ekstraksi padat cair, karena sifat fisik dari pasir silikanya sendiri.Metode ekstraksi yang digunakan adalah metode Heap Leaching menggunakan H2SO4, metode ini digunakan karena merupakan metode yang murah, praktis, tidak perlu destruksi, dan preparasi yang tidak rumit.Metode pengendapan menggunakan natrium sulfat kemudian dilakukan untuk memisahkan logam-logam maupun pengotor yang terdapat dalam larutan. Selanjutnya dilakukan pemisahan kembali darilogam pengotor menggunakan asam fitat untuk kemudian diperoleh hasil ion lantanum yang lebih murni. Didapatkan hasil lantanum yang berhasil didapat.

---

One of rare earth metal element is lanthanum. Lanthanum can be separated by several techniques such as solvent extraction, ion exchange, and fractional precipitation methods. One of many source of lanthanum is the silica sand mineral, and Indonesia has a considerable amount of silica sand that can be used as a high lanthanum production potential. In this research, the extraction of lanthanum from silica sand mineral will be done. Separation of lanthanum metal from silica sand using liquid solid extraction is done due to the physical properties of the silica sand itself.

The extraction method that is used in this research is Heap Leaching method using H2SO4. This method is used because it is a cheap, practical method, no need for destruction, and the preparation is not complicated. The precipitation method using sodium sulfate is then carried out to separate the metals and impurities present in the solution. Furthermore, the separation of the impurity metal using phytic acid is then obtained to produce purer lanthanum ions. The result of lanthanum obtained by this method ide 0.709 ppm with percent extraction is 11.3."