Ditemukan 3 dokumen yang sesuai dengan query
A`rasy Fahruddin
Abstrak :
BTS (Base Transceiver Station) merupakan salahsatu bagian penting dalam jaringan telekomunikasi seluler karena menjadi penghubung antar jaringan dan antara jaringan dengan mobile seluler. BTS membutuhkan sistem pendingin untuk mendapatkan temperatur kerja yang optimal dan menjaga komponen elektronik didalamnya agar tidak cepat rusak. Sistem pendingin konvensional menggunakan Air Conditioner (AC) yang masih menggunakan refrigeran R-22 dimana refrigeran jenis ini masih berpotensi merusak ozon. Untuk itu perlu dirancang sebuah pendingin BTS yang lebih ramah lingkungan tidak merusak ozon. Sistem yang dipilih untuk menggantikan sistem pendingin konvensional yaitu sistem pendingin BTS dengan menggunakan Thermoelectric Cooler (TEC).
Pada penelitian ini dilakukan perancangan perangkat pendingin yang dikhususkan pada pendinginan lemari Radio Base System (RBS). RBS memiliki fungsi yang penting dalam sistem BTS dan cukup sensitif terhadap temperatur kerja. Pada penelitian ini akan dibuat prototype lemari RBS dengan pemanas elektrik dan empat buah perangkat pendingin thermoelektrik. Masing-masing perangkat terdiri dari 4 dan 6 modul thermoelektrik dengan pendingin udara pada sisi panasnya. Dari hasil pengujian didapatkan temperatur kabin dibawah 39,11oC untuk mendinginkan beban panas maksimum 1615 W dengan pemakaian daya listrik sebesar 454 W.
BTS (Base Transceiver Station) is an important part of mobile telecommunications network which works as an internetwork link and network-mobile phone link. BTS requires a cooling system to mantain optimal working temperature of the electronic components so that the lifetime of those components can be lengthened. Air Conditioner (AC) using refrigerant R-22 is a conventional cooling systems which is still a potential damage to ozone layer. Therefore, it is necessary to environmental friendly cooling base stations. Thermoelectric Cooler (TEC) was proposed as an alternative cooling system.
This research focused on the cooling of the Radio Base System (RBS) components. RBS is an important function in the BTS system and quite sensitive to the working temperature. The RBS prototype cabinet with electric heating and four cooling devices thermoelectric has been designed and built. Each cooling device consists of 4 and 6 thermoelectric modules with air cooling on the hot side. The experimental results of the cabin temperature is 39.11°C at maximum heat load 1615 W by using electrical power consumption for cooling of 454 W.
Depok: Fakultas Teknik Universitas Indonesia, 2011
T28818
UI - Tesis Open Universitas Indonesia Library
Ferdiansyah Nurudi Iskandar
Abstrak :
Semakin majunya perkembangan teknologi informasi saat ini menuntut semakin cepatnya kebutuhan mikroprosesor yang memiliki kemampuan komputasi yang sangat tinggi. Pada Central Processing Unit (CPU) generasi terakhir ditanamkan sekitar 1,17 miliar transistor yang berarti lebih banyak panas yang dihasilkan. Total disipasi panas untuk CPU berkinerja tinggi adalah sekitar 110 W hingga 140 W dan akan terus naik apabila frekuensi dan tegangan CPU dinaikan. Dengan fluks kalor yang semakin tinggi sistem pendinginan konvensional Heatsink Fan (HSF) yang biasa digunakan sudah tidak lagi memadai untuk meredam panas CPU. Pada penelitian ini dilakukan pengujian terhadap performa dari nano fluida sebagai fluida kerja yang digunakan bersamaan dengan liquid block ? heatpipe dan termoelektrik untuk mendinginkan CPU. Pengaruh konsentrasi dari partikel nano terhadap base fluid juga diteliti dan hasilnya dibandingkan dengan sistem pendingin konvensional (HSF) yang sudah ada.
Dari hasil pengujian, Liquid block ? heatpipe mempunyai keunggulan yang lebih signifikan dalam proses penyerapan kalor dari CPU dibandingkan dengan sistem pendinginan konvensional. Sistem Liquid bloc ? heatpipe dengan fluida kerja nano fluids telah terbukti memberikan hasil yang lebih baik dengan peningkatan pada kinerja termal dibandingkan base fluid-nya. Performa yang lebih tinggi didapat dengan menggabungkan liquid block - heatpipe, nano fluids dan termoelektrik karna berhasil menurunkan temperatur CPU dibawah ruangan.
In the past few years,the growth of information technology is increasing rapidly resulting in a high demand for microprocessor that has a very high computing ability. On the last generation of CPU 1,17 billion transistor were planted which means a lot of heat were created. The total heat dissipation resulting from high end CPU is about 110 to 140 W which will rise if CPU voltage and frequency increased. With a higher heat flux, the conventional cooling system such a Heatsink Fan (HSF) commonly used can no longer dissipate heat from CPU. In this research, nano fluids were tested with liquid block - heatpipe and thermoelectric to cool the CPU. The concentration effect of the nano partikel against base fluids also tested and the result will be compare with the existing conventional cooling system.
From the test result, liquid block - heatpipe have more significant result compare to existing conventional (HSF) cooling system. Liquid block system with nano fluids has proven to give a better result compare to its base fluids. Higher performance obtained by combining the liquid block - heatpipe, nano fluids and thermoelectric whic is succeded in reducing CPU below ambient temperature.
Depok: Fakultas Teknik Universitas Indonesia, 2011
T28330
UI - Tesis Open Universitas Indonesia Library
Ardhana P.
Abstrak :
Elektroforesis merupakan peristiwa pergerakan molekul¬molekul kecil yang dibawa oleh muatan listrik akibat adanya pengaruh medan listrik. Peristiwa ini dimanfaatkan pada bidang kedokteran untuk menggerakan DNA, dimana pergerakan DNA ini berfungsi untuk mengidentifikasikan DNA. Teknik identifikasi seperti ini biasa disebut dengan kromatografi, yaitu proses pemisahan suatu campuran senyawa. Dimana DNA dengan fragmen pendek akan bermigrasi lebih jauh dibanding fragmen DNA yang lebih panjang. Dengan begitu fragmen DNA akan terpisah dari molekul lain yang tercampur bersamanya. Akan tetapi arus listrik yang digunakan untuk membuat fragmen DNA bermigrasi dapat menimbulkan panas, yang kemudian akan diterima gel agarosa. Panas berlebih ini harus dihindari karena dapat menyebabkan AgaroseGelelectrophoresistidak dapat beroperasi sebagaimana mestinya. Tujuan dari penelitian ini adalah mengembangkan alat elektroforesis yang sudah ada, dikombinasikan dengan termoelektrik, guna menyerap kalor yang dihasilkan oleh AgaroseGelelectrophoresis. Alat pembuang kalor yang digunakan pada sisi panas termoelektrik adalah heatpipedan heatsink. Temperature larutan TAE terendah yang berhasil dicapai dalam eksperimen ini adalah 10,75˚C dengan nilai COP 0,51. Hasil dari penelitian ini menunjukan bahwa penggunaan termoelektrik pada alat elektroforesis ini dapat digunakan sebagai sistem pendinginan AgaroseGelelectrophoresis.
Electrophoresis is phenomenon of molecule movement which brought by electric current. This phenomenon used by medical sector to move the DNA, which the movement of DNA function is to identify the DNA. This identification method called by cromatograph. Cromatograph is separation of mixing compound. The short fragment of DNA will move farther than the long one. As a consequence the DNA fragment will separate from another molecule. But then the current of eletricity which use to move the DNA fragmen can produce heat. Overheated must be avoided because that bringing on AgaroseGelelectrophoresisdo not operate very well. The objective of this experiment is to improve electrophoresis device, which is combined with thermoelectric. The function of thermoelectric to absorb the heat that AgaroseGelelectrophoresisproduce. On the hot side of thermoelectric the writer put heat ejector (heat pipe and heat sink). The lowest temperature of TAE solution that reached in this experiment is 10,75˚C with COP 0,51. The result of this experiment is the application of thermoelectric can be use as cooling system in AgaroseGelelectrophoresis.
2011
S41
UI - Skripsi Open Universitas Indonesia Library