Hasil Pencarian  ::  Simpan CSV :: Kembali

Abstrak :
Structural adhesives have been widely used to join metal to metal, and metal to composite in automotive and aircraft structures. However, the adhesive is susceptible to water absorption from the surrounding environment and this affects the mechanical properties of the adhesive, leading to reduction in the performance of the structure. This paper investigated the water absorption and desorption behaviour of FM 73M structural adhesive film and its effect on the tensile properties. The adhesive was immersed in deionised water at a temperature of 50oC. A gravimetric method was carried out to obtain the water uptake. Dog bone specimens were used to investigate the residual tensile strength of the adhesive. Finite element modelling was performed to model the spatial moisture distribution in the adhesive and the residual tensile strength after having absorbed water. It was found that the water absorption of FM 73M deviated from Fick's second law, however the desorption behaviour followed Fick's second law. The tensile properties of the adhesive (the tensile strength and the elastic modulus) tend to decrease with the increase of water content and they are recovered after desorption at the same temperature as the absorption. The residual tensile strength was predicted using a continuum damage approach combined with environmental degradation. Good agreement has been found between the predicted and the experimental results.

Abstrak :
ABSTRAK
Penghubung geser spiral adalah salah satu jenis penghubung geser yang digunakan pada struktur komposit. Pengujian terhadap besarnya kekuatan penghubung geser spiral dilakukan dengan pengujian push out. Dari pengujian tersebut diperoleh grafik hubungan beban-slip yang kemudian dipergunakan sebagai input karakteristik link.. Link adalah elemen konektor dalam SAP2000 yang dipergunakan sebagai konektor pada balok komposit baja-beton. Permodelan dilakukan pada 4 spesimen yang memiliki properti material dan karakteristik link yang berbeda satu sama lain. Hasil menunjukkan bahwa link pada program SAP2000 mampu mengidealisasikan perilaku dari penghubung geser spiral dengan kontrol validasi berupa lendutan hasil pengujian eksperimental yang dilakukan oleh Council of Scientific and Industrial Research Govt. of India New Delhi (1969).

---

ABSTRACT
Spiral shear connector is one of shear connector types used in composite structure. Shear connector capacity tests could be done by push out test. Those test results is a load-slip relationship curve that will be used as an input for link characteristic. Link is a connector element in SAP2000 used as a connector for steel-concrete composite beam. Modelling of steel-concrete composite beam will be done for 4 specimens which has different material properties and link characteristics one anothers. Results show that link connector in SAP2000 could idealize the behaviour of spiral shear connector with validation control model using deflection from experimental test by Council of Scientific and Industrial Research Govt. of India New Delhi (1969).