Hasil Pencarian  ::  Simpan CSV :: Kembali

Abstrak :
Early damage of pavement occurs when one of the factors does not meet specified requirements. factors that cause a pavement damage re quantity and quality of asphalt, numbers of passing in compaction, mixing and compaction temperature etc.....

Abstrak :
One of methods tos increase the caracteristic of asphalt mixture is to add plastic in chemical term know as polymer. Generally, plastic is in pellet form so that additional equipment is needed to mix with asphalt....

Abstrak :
Berdasarkan hasil uji stabilitas dan volumetrik Marshall, kualitas campuran aspal dan agregat ditentukan melalui besar Kadar Aspal Optimum (KAO). Dalam pembuatan sampel, rentang prediksi KAO ditentukan dengan menghitung berdasarkan ukuran fraksi agregat (agregat kasar, agregat halus, dan bahan pengisi) sesuai dengan pedoman Asphalt Institute dan RSNI M-06-2004. Dewasa ini, banyak peneliti yang melakukan pengembangan campuran beton aspal modifikasi menggunakan bahan aditif dengan proses basah atau kering. Penelitian ini dilakukan untuk membandingkan antara model prediksi KAO Asphalt Institute yang tercantum dalam RSNI M-06-2004 dengan model hasil regresi linear penelitian ini; membuktikan pengaruh perubahan proporsi fraksi ukuran agregat terhadap perubahan nilai KAO; dan melakukan analisis terkait perubahan koefisien setiap fraksi ukuran agregat pada model prediksi KAO pada campuran aspal konvensional dan campuran aspal modifikasi. Hasil model regresi linear bahwa fraksi agregat kasar tidak mempengaruhi penentuan nilai KAO, sementara agregat halus dan bahan pengisi memiliki pengaruh. Meningkatnya proporsi agregat halus menyebabkan peningkatan nilai KAO, yang mana pada campuran aspal konvensional lebih signifikan daripada campuran aspal modifikasi. Peningkatan proporsi bahan pengisi dapat meningkatkan nilai KAO pada proses kering, sebaliknya dapat menurunkan nilai KAO pada proses basah. ......Based on the stability and volumetric Marshall test results, the quality of asphalt and aggregate mixtures is determined by the Optimum Asphalt Content (OAC). In sample production, the predicted range of OAC is determined by calculating based on the aggregate fraction sizes (coarse aggregate, fine aggregate, and filler) according to the Asphalt Institute’s guidelines and RSNI M-06-2004. Nowadays, many researchers are developing modified asphalt concrete mixtures using additive materials through wet or dry processes. This study compared the Asphalt Institute's OAC prediction model, as stated in RSNI M-06-2004, with the regression model developed in this research. It aimed to demonstrate the influence of changes in aggregate size fraction proportions on the OAC value and analyze the coefficient changes for each aggregate size fraction in the OAC prediction model for both conventional and modified asphalt mixtures. The linear regression model results showed that the coarse aggregate fraction did not affect the determination of the OAC value. In contrast, the fine aggregate and filler material had an influence. Increasing the proportion of fine aggregate led to an increase in the OAC value, which was more significant in conventional asphalt mixtures than in modified asphalt mixtures. Increasing the proportion of filler material could increase the OAC value in the dry process. However, conversely, it could decrease the OAC value in the wet process.

Abstrak :
Di Indonesia, umumnya, limbah konstruksi tidak dimanfaatkan dengan baik. Untuk mencegah siklus kerusakan alam tersebut, diperlukan suatu inovasi. Inovasi yang dapat menjadi solusi dari limbah-limbah konstruksi yang terus bertambah dan untuk mengurangi dampak-dampak yang tidak diinginkan pada lingkungan. Selain itu, Hal ini dapat menjadi alternatif penggunaan agregat alami untuk perkerasan jalan yang terus menipis. Penelitian ini merencanakan penggunaan limbah beton sebagai pengganti agregat kasar pada campuran lapis aus (AC-WC) sebagai salah satu perwujudan inovasi terhadap solusi dari permasalahan limbah konstruksi yang ada di Indonesia. Pengujian skid resistance dilakukan kepada campuran lapis aus (AC-WC) modifikasi sebagai parameter pengaruh dan kelayakan penggunaan campuran pada dunia nyata. Penelitian ini merencanakan campuran lapis aus (AC-WC) modifikasi dengan komposisi agregat kasar (batu split), agregat menengah (screening), agregat halus (abu batu) dan RCA. Kadar aspal optimum terbaik, Nilai skid resistance serta pengaruh limbah beton sebagai pengganti agregat kasar akan dibandingkan dengan sampel kontrol yaitu campuran lapis aus (AC-WC) dengan komposisi agregat kasar (batu split), agregat menengah (screening) dan agregat halus (abu batu). Pengujian skid resistance menggunakan alat British Pendulum Tester terhadap campuran lapis aus (AC-WC) modifikasi dan non modifikasi dengan KAO nya yaitu 9% dan 98. Berubahnya komposisi campuran lapis aus (AC-WC) mempengaruhi nilai skid resistance menjadi lebih tinggi. ......In Indonesia, usually, construction waste is not put to good use. To prevent this cycle of destruction of nature, an innovation is needed. Innovations that can be a solution to the growing construction waste problems and to reduce the unwanted impacts on the environment. thus, it can be an alternative to the use of natural aggregates for road pavements that continue to thin out. This study plans the use of concrete waste as a substitute for coarse aggregates in wear-coated mixtures (AC-WC) as one of the manifestations of innovation to the solution to the problem of construction waste in Indonesia. Skid resistance testing is performed on modified wear-coated mixtures (AC-WC) as parameters of the influence and feasibility of using the mixture on the field. This study planned a modified wear-coated mixture (AC-WC) with the composition of split stones as the coarse aggregates, screening as the intermediate aggregates, stone ash as fine aggregates and reclaimed concrete aggregates as the substitution of the coarse aggregates. The best optimum asphalt content, skid resistance value and the influence of concrete waste as a substitute for coarse aggregate will be compared with control samples, wear-coated mixtures (AC-WC) with a composition of coarse aggregate (split stone), medium aggregate (screening) and fine aggregate (stone ash). Skid resistance testing using the British Pendulum Tester tool against modified and non-modified wear-coated mixtures (AC-WC) with its KAO, namely 9% and 8%. Changes in the composition of the wear-coated mixture (AC-WC) affect the value of skid resistance to be higher.