Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 2 dokumen yang sesuai dengan query
cover
Lalu Suhaimi
"ABSTRAK
Seng oksida (ZnO) telah diaplikasikan sebagai pemanas transparan. Namun, penelitian tentang mikrorod ZnO sebagai pemanas transparan belum dikembangkan. Pada penelitian ini dilakukan fabrikasi lapisan tipis mikrorod ZnO dengan metode chemical bath deposition. Material yang digunakan yaitu zinc nitrate tetrahydrate dan heksametilentetramine. Varibel pada penelitian ini yaitu konsentrasi larutan bibit sebesar 0.005, 0.010, 0.015, 0.025, dan 0.050 M serta perlakuan hidrotermal pada sampel 0.015 M. Karakterisasi mikrorod ZnO dilakukan dengan menggunakan XRD, FESEM, UV-Vis dan four point probe. Hasil penelitian menunjukkan peningkatan konsentrasi larutan mampu menurunkan celah pita energi, Eg mikrorod ZnO yaitu 3.60 menjadi 3.18 eV dan meningkatkan ukuran kristalit yaitu 41.541 hingga 95.076 nm. Diameter terbesar mikrorod ZnO yaitu 288.252 nm pada konsentrasi 0.015 M. Selain itu, peningkatan konsentrasi larutan menyebabkan transmitansi dan resistivitas turun yaitu masing-masing sebesar 72% menjadi 35% dan 0.787 x10-4 menjadi 0.013 x 10-4 Ωcm. Perlakuan hidrotermal pada sampel 0.015 M menyebabkan penurunan diameter dari 288. 252 menjadi 125.824 nm dan meningkatkan ukuran kristalit serta menurunkan Eg yaitu masing-masing 71.198 menjadi 165.696 nm dan 3.25 menjadi 3.19 eV. Selain itu, perlakuan hidrotermal menurunkan transmitansi dan resistivitas  yaitu masing-masing sebesar  50.5% menjadi 38% dan  1.126 x 10-4 menjadi 0.833 x 10-4 Ωcm. Perlakuan hidrotermal menghasilkan pemanas transparan yang optimum.


Zinc oxide (ZnO) has been applied as a transparent heater. However, research on ZnO microrod as transparent heaters has not been developed. In this study, the fabrication of microrod ZnO was carried out by using the chemical bath deposition method. The material used is zinc nitrate tetrahydrate and hexamethylentetramine. The variables in this study were the concentration of seed solutions of 0.005, 0.010, 0.015, 0.025, and 0.050 M and the hydrothermal treatment in the sample 0.015 M. The characterization of ZnO microrod was carried out using XRD, FESEM, UV-Vis and four point probes. The results showed an increase in solution concentration was able to reduce the energy band gap, Eg of ZnO microrod which is 3.60 to 3.18 eV and increase the size of the crystallite which is 41.541 to 95.076 nm. The largest diameter of ZnO microrod is 288.252 nm at a concentration of 0.015 M. In addition, an increase in the concentration of the solution causes transmittance and resistivity to decrease, from 72% to 35% and from 0.787 x10-4 to 0.013 x 10-4 Ωcm, respectively. The hydrothermal treatment of 0.015 M sample caused a decrease in diameter from 288. 252 to 125.824 nm and increased the size of the crystallite and lowered Eg, from 71.198 to 165.696 nm and from 3.25 to 3.19 eV, respectively. In addition, it has decreases transmittance and resistivity from 50.5% to 38% and from 1.126 x 10-4 to 0.833 x 10-4 Ωcm, respectively. The hydrothermal treatment produces optimum transparent heaters.

"
2019
T52368
UI - Tesis Membership  Universitas Indonesia Library
cover
Dewi Ulul Azmi
"Nanopartikel ZnO merupakan bahan logam oksida yang memiliki kemampuan fotokatalis. Dekorasi ZnO dengan nanopartikel plasmonik diharapkan dapat menimbulkan LSPR yang meningkatkan aktivitas fotokatalitik. Pada penelitian ini emas (Au) dan perak (Ag) dipilih untuk memodifikasi ZnO sebagai material yang memiliki efek plasmonik yang dapat peningkatan medan elektromagnetik yang kuat di dekat permukaan nanopartikel. Peningkatan ini menawarkan peluang untuk meningkatkan penyerapan cahaya dan meningkatkan pemisahan muatan dalam sistem fotokatalitik. Pada penelitian ini sintesis nanomaterial tersebut dilakukan melalui RLAL. Teknik laser ablasi yang digunakan memiliki keistimewaan berupa proses yang biocompatible dengan meminimalkan penggunaan bahan kimia, namun parameter sintesis tetap dapat dikontrol dengan baik. Nanopartikel yang dihasilkan lebih murni dan memiliki permukaan yang bersih. Parameter sintesis pada penelitian ini, energi laser divariasi untuk masing-masing jenis material plasmonik, sehingga mendapatkan energi laser maksimum berdasarkan nilai uji fotokatalitik tertinggi. Karakteristik nanokomposit yang terbentuk diuji dengan UV-Vis dan TEM. Hasil penelitian menunjukkan, energi laser meningkatkan optical density ZnO dan energi band gap. Nanopartikel ZnO hasil sintesis memiliki puncak absorbansi pada spektrum UV dengan energi bandgap 3,14 – 3,3 eV dengan ukuran partikel 45 ± 15 nm, nanokomposit ZnO-Au memiliki energi bandgap 3,0 – 3,3 eV dengan ukuran partikel 42 ± 16 nm (ZnO) dan 9 ± 13 nm (Au), dan nanokomposit ZnO-Ag memiliki energi bandgap 3,26 – 3,3 eV dengan ukuran partikel 43 ± 14 nm (ZnO) dan 8 ± 3 nm (Ag). Nanokomposit ZnO-Au memiliki keamampuan degradasi RhB pada cahaya tampak sebesar 72,39% dan sedangkan ZnO-Ag 67,30 %.

Zinc oxide (ZnO) nanoparticles are a metal oxide material with photocatalytic properties. Decoration of ZnO with plasmonic nanoparticles is expected to induce LSPR, which enhances photocatalytic activity. In this study, gold (Au) and silver (Ag) were chosen to modify ZnO as materials that have a plasmonic effect that can increase the strong electromagnetic field near the nanoparticle surface. This enhancement offers opportunities to improve light absorption and enhance charge separation in the photocatalytic system. In this study, the synthesis of these nanomaterials was carried out using RLA. The laser ablation technique used has the advantage of being a biocompatible process by minimizing the use of chemicals, but the synthesis parameters can still be well controlled. The resulting nanoparticles are purer and have a clean surface. The synthesis parameters in this study, laser energy was varied for each type of plasmonic material, to obtain the maximum laser energy based on the highest photocatalytic test value. The characteristics of the formed nanocomposites were tested with UV-Vis and TEM. The results showed that laser energy increases the optical density of ZnO and the band gap energy. The synthesized ZnO nanoparticles have an absorption peak in the UV spectrum with a band gap energy of 3.14 – 3.3 eV with a particle size of 45 ± 15 nm, ZnO-Au nanocomposites have a band gap energy of 3.0 – 3.3 eV with a particle size of 42 ± 16 nm (ZnO) and 9 ± 13 nm (Au), and ZnO-Ag nanocomposites have a band gap energy of 3.26 – 3.3 eV with a particle size of 43 ± 14 nm (ZnO) and 8 ± 3 nm (Au). ZnO-Au nanocomposites could degrade RhB under visible light by 72.39%, while ZnO-Ag is 67.30%."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2024
T-pdf
UI - Tesis Membership  Universitas Indonesia Library