Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 68 dokumen yang sesuai dengan query
cover
Mochamad Sholeh
Abstrak :
ABSTRAK
Kecepatan produk sampai ke pasaran menuntut kecepatan dalam pemilihan desain, dimana bentuk desain dipengaruhi oleh fitur, bentuk fitur berbeda bisa memiliki fungsi sama sehingga pilihan bentuk fitur akan ikut menentukan dalam proses permesinan dan biaya produksinya

Pada penelitian ini dilakukan penetapan identitas melalui pengenalan informasi geometri dari bentuk-bentuk fitur yang diklasifikasikan oleh Jong-Yun Jung kemudian digambar dengan model solid disimpan bentuk stp atau step file selanjutnya diekstrak dengan notepad sehingga diperoleh entity Advance_Face dan Edge_Curve, yang diolah menjadi koefisien relatif produk.

Indek kompleksitas fitur produk mekanik dihitung menggunakan model yang dikembangkan sebelumnya oleh El Maraghy dan diperoleh nilai kompleksitas tertinggi untuk fitur rotasional adalah bentuk Neck yaitu 6,30, fitur prismatik bentuk slot yaitu 6,05, fitur slab yaitu bentuk pocket sebesar 5,66 dan fitur revolving sebesar 4,94
Abstract
The speed of products demands speed in the selection of design where design is influenced by the shape of the feature, having different form of a feature can have the same functions so insiders features form options determine the process of machinery and production costs.

This research was conducted on identity determination through the introduction of information geometry forms features are classified by Jong-Yun Jung later drawn with CAD solid form, it saved on stp model or step file and then extracted with notepad so that retrieved entity Advance_Face and Edge_Curve, which are processed into relative complexity coefficients.

Feature product complexity index was calculated using a model developed by El Maraghy and accrues the highest complexity value for rotational features is a form of neck of 6.30, prismatic features form slots which of 6.05, the form of pocket features slab of 5.66 and revolving features of 4.94.
2012
T31438
UI - Tesis Open  Universitas Indonesia Library
cover
Manurung, Vinda B. T. L.
Abstrak :
Kemampuan dalam menghadirkan sebuah produk yang dapat dipastikan tingkat reliability, availabilty, dan mantainability sudah menjadi syarat tersendiri bagi para industri di tengah masyarakat ini. Di dalam siklus hidup sebuah produk, ada tiga tahap utama yang menentukan sifat pokok produk tersebut yakni, tahap perencanaan, produksi, dan penggunaan-pemeliharaan. Penelitian yang ada telah menghadirkan pemodelan perhitungan kompleksitas sistem manufaktur sebagai salah satu jenis alat ukur sebuah produk ketika melewati tahap produksi. Penelitian ini mengadaptasi pemodelan perhitungan kompleksitas ke dalam lingkungan lain yakni pada tahap pemeliharaan dengan menguraikan karakterisasi semua parameter yang berpengaruh dalam setiap tahapan pemeliharaan ke dalam model perhitungan kompleksitas. Pembobotan multi tier ranking dan normalisasi sebagai bagian dalam model perhitungan digunakan untuk menilai parameter parameter tersebut kedalam bentuk angka kuantitatif Pemodelan ini akan berperan sebagai tool untuk menilai kegiatan pemeliharaan yang dijalani oleh sebuah produk Perancangan pemodelan perhitungan kompleksitas pemeliharaan ini ditempuh melalui implementasi pada studi kasus pemeliharaan sepeda motor 100cc dan 883cc. Hasil yang diperoleh adalah nilai indeks kompleksitas pemeliharaan sebesar 79 65 untuk sepeda motor 100cc dan 88 67 untuk sepeda motor 883cc. Pembentukan model perhitungan indeks kompleksitas akan dibahas lebih detail di dalam penelitian ini.
The ability to deliver a product, that has the right levels of reliability, availabilty, and mantainability, has become a mandatory requirement for any industry in this era of society. In a product lifecycle, there are three main stages that determine those basic properties in a product, they are : stage of development, production, and use - maintenance. Existing research has presented the complexity of the manufacturing system modeling calculations as a tool to asses a product as it passes through the production stage. This thesis adapted the computation modeling complexity into another environment : the stage of maintenance, by outlining all the parameters, that influence every activity in the maintenance system, into the the model calculations of complexity. Multi-tier ranking and normalization, as part of the calculation model, are being used to assess these parameters in the form of numbers (quantitative). For this time being, this model will serve as a tool to assess the maintenance activities undertaken by a product. The modeling design of maintenance complexity is achieved through the implementation of maintenance case study from 100cc and 883cc motorcycles. The results of the maintenance complexity from the study case are respectively 79.65 for motorcycles 100cc, and 88.67 for 883cc motorcycles. The development for the modeling design of maintenance complexity will be discussed further in this thesis.
Depok: Fakultas Teknik Universitas Indonesia, 2013
S46060
UI - Skripsi Membership  Universitas Indonesia Library
cover
Kalpakjian, Serope
London: Prentice-Hall, 2001
670 KAL m
Buku Teks  Universitas Indonesia Library
cover
Andreasen, M. Myrup (Mogens Myrup), 1939-
Berlin: Springer, 1983
621.7 AND d
Buku Teks  Universitas Indonesia Library
cover
Niebel, Benjamin W.
Tokyo: Asian Productivity Organization, 1971
658.5 NIE p
Buku Teks  Universitas Indonesia Library
cover
Winter Dewayatna
Abstrak :
Pemodelan dan identifikasi merupakan suatu tahapan yang penting dan menantang pada perancangan pengendali berbasis model seperti internal model control (IMC) atau model-based predictive control (MBPC). Kebanyakan proses-proses industri merupakan proses-proses non-linier multi-input multi-output (MIMO). Dalam tesis ini dilakukan identifikasi sistem non-linier MIMO empat tangki menggunakan model fuzzy Takagi-Sugeno. Untuk membuat model ini, digunakan algoritma Gustafson-Kessel (GK) fuzzy clustering yang mengotomatisasi pembuatan fungsi keanggotaan dari bagian premis, fungsi affine linier dari bagian konsekuen dan aturan-aturannya. Data-data diperoleh dari simulasi model proses sistem empat tangki. Validasi model menunjukkan bahwa model menunjukkan kinerja sangat balk terhadap data identifikasi dan terhadap data Validasi, dengan nilai Variance Accounted For (VAF) di atas 99%. Uji step menunjukkan model fuzzy Takagi-Sugeno lebih baik dari model linier ARX. Steady state error cenderung meningkat dengan bertambah besarnya amplitudo step, kemungkinan disebabkan oleh data pelatihan yang lebih banyak pada level rendah.
Modelling and identification are important and challenging steps in design of control systems especially model-based control systems like internal model control (IMC) and model-based predictive control. Industrial processes are mostly nonlinier multi-input multi output (MIMO) process. Work in this thesis is the identification of nonlinier multi-input multi-output of quadrupole-tank system by fuzzy Takagi-Sugeno model using Gustafson-Kessel (GK) fuzzy clustering algorithm. This algorithm automates membership-function creation of premis part, affine linier function of consequent part, and the rules. Data required to make the model are obtained by simulation of quadrupole-tank process model. Model validation shows that performance of the model is very good on both identification and validation data, that the value of Variance Accounted For (VAF) is more than 99%. Step test shows that fuzzy Takagi-Sugeno model is better than ARX. Steady state error tend to be worse on increasing of step amplitude, this maybe caused by training data which are mostly at low level.
Depok: Fakultas Teknik Universitas Indonesia, 2006
T16937
UI - Tesis Membership  Universitas Indonesia Library
cover
Evi Rositawati
Abstrak :
Salah satu aktivitas yang memegang peranan penting dalam menjamin kualitas packaging material yang akan dipakai pada proses produksi adalah aktivitas inspeksi. Dalam proses inspeksi selalu muncul situasi yang dinamis. Penelitian ini dilakukan untuk melakukan perancangan simulasi inspection plan aktivitas packaging material. Pemodelan simulasi dilakukan menggunakan software Plant Simulation. Model simulasi yang dibuat yaitu model simulasi dengan kondisi yang berjalan saat ini serta model dengan penentuan sampel menggunakan metode MIL STD 1916. Hasil penelitian ini adalah model dengan penentuan sampel yang berjalan saat ini, 1096 sampel bisa diselesaikan dengan 5 orang inspektor yang bekerja 1 shift. Sedangkan dengan penentuan sampel MIL STD 1916, 2120 sampel bisa diselesaikan dengan 6 orang inspektor yang bekerja 3 shift setiap hari. ...... One of the main activity that has important impact to make sure packaging materials quality that would be used in production process is inspection activity. In the inspection process always appear dynamic situation. This study was conducted to simulate the design of packaging material inspection plan activity. Simulation modeling performed using the Plant Simulation software. The simulation model that created is a simulation model using current conditions and model with sample size using MIL STD 1916 method. Results of this study was to define model using the sample size current condition, 1096 samples could be completed by 5 inspectors who work one shift. While using the sample size MIL STD 1916 method, 2120 samples could be completed by 6 inspectors who work 3 shifts per day.
Depok: Fakultas Teknik Universitas Indonesia, 2015
T44537
UI - Tesis Membership  Universitas Indonesia Library
cover
Rina Wahyuningtyas
Abstrak :
Penelitian ini bertujuan untuk memberikan perencanaan peningkatan fleksibilitas produksi pada produk dengan unmatching ratio tertinggi pada sebuah perusahaan di Indonesia. Penelitian ini berfokus pada permasalahan ketidakmampuan menyerap fluktuasi order yang dilakukan oleh dealer atau end customer di salah satu perusahaan otomotif ternama di Indonesia. Jika hal itu tidak dapat diatasi, maka akan berpotensi terjadinya cancelation order. Untuk itu, diperlukan perbaikan untuk dapat meningkatkan fleksibilitas produksi perusahaan. Metode yang digunakan dalam penelitian ini adalah DMAIC (Define, Measure, Analyze, Improve & Control) untuk mendapatkan solusi yang tepat. Perbaikan yang dilakukan akan memberikan dampak terhadap opportunity cost dan unmatching ratio. Pada penelitian ini, dibuat skema penyerapan fluktuasi order secara mingguan berupa WOC (Weekly Order Change) dengan melakukan pengadaan safety stock terhadap unique part dengan melakukan perhitungan menggunakan Q-model. Hasil yang didapatkan dari penelitian ini adalah profit sebagai opportunity cost Rp431.635.851 serta penurunan unmatching ratio dari 4,9% pada keadaan sebelum menjadi 1,2% pada keadaan setelah perbaikan ......This study aims to increasing production flexibility on highest unmatching ratio products in a Indonesia company. This study focuses on the problem of an inability to absorb orders fluctuations by dealer or end customer at one of Indonesia's leading automotive companies. If it is not solved, it will potentially causes cancelation order. Therefore, the necessary improvements in order to increase the production flexibility of the company. Method used in this research is DMAIC (Define, Measure, Analyze, Improve & Control) in way to get the right solution. Improvements will have an impact on opportunity cost and unmatching ratio. In this study, absorption scheme fluctuations order on a weekly basis in the form of WOC (Weekly Change Order) with adding a safety stock of unique part by using Q-model calculations. The results obtained from this study is the profit as the opportunity cost IDR431,635,851 and unmatching ratio decrease from 4.9% in before condition become 1.2% in after condition.
Depok: Fakultas Teknik Universitas Indonesia, 2016
S63012
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Audri
Abstrak :
ABSTRAK
Penelitian ini dilakukan untuk menganalisis tingkat efisiensi teknis perusahaan pada industri penyamakan kulit Indonesia (ISIC5 32312). Penelitian ini menggunakan unbalanced panel data tingkat perusahaan pada industri penyamakan kulit dari tahun 2000 sampai 2012. Untuk mengukur tingkat efisiensi teknis perusahaan, penelitian ini menggunakan metode Stochastic Frontier Approach (SFA). Penelitian ini menemukan bahwa ukuran perusahaan dan perusahaan yang berlokasi di Provinsi Jawa Barat memiliki pengaruh positif dan signifikan terhadap tingkat efisiensi teknis perusahaan. Hasil estimasi juga mengindikasikan bahwa penggunaan bahan baku impor dan penambahan jumlah tenaga kerja tidak berpengaruh positif terhadap peningkatan efisiensi teknis perusahaan.
ABSTRACT
This study was conducted to analyze the level of technical efficiency of firms in the Indonesia tanners industry (ISIC5 32312). This study uses unbalanced panel of firm-level data on the tanning industry from 2000 to 2012. To measure the technical efficiency of the firm's, this study using Stochastic Frontier Approach (SFA). This research finds that the size of companies and companies located in the province of West Java has a positive and significant impact on the level of firm technical efficiency. The estimation results also indicate that the use of imported raw materials and increase the number of non-production labor is not give a positive impact on the firm technical efficiency.
Depok: Fakultas Ekonomi dan Bisnis Unversitas Indonesia, 2016
S64401
UI - Skripsi Membership  Universitas Indonesia Library
cover
Towbridge: CRC Press, Taylor & Francis Group, 2008
670 STR
Buku Teks  Universitas Indonesia Library
<<   1 2 3 4 5 6 7   >>