Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 3 dokumen yang sesuai dengan query
cover
Lissa Florencia Putri Sutrisna
"Lidokain hidroklorida (LiH) merupakan agen anestesi lokal tipe amida yang umum digunakan pada prosedur dermatologi. LiH dikategorikan sebagai BCS (biopharmaceutics classification system) kelas III, yakni memiliki kelarutan yang tinggi dan permeabilitas yang buruk. Tujuan dari penelitian ini adalah memformulasikan dan mengevaluasi sediaan dissolving microneedles (DMN) yang mengandung LiH dengan basis polimer berbeda, yaitu poli(vinil pirolidon) K30 (PVP-K30) dan asam hialuronat (AH), serta melakukan uji pelepasan obat secara in vitro dan in vivo. Evaluasi sediaan yang dilakukan adalah evaluasi fisik, karakterisasi kehilangan massa setelah pengeringan, karakteristik mekanis, simulasi penetrasi ke dalam kulit, pelarutan jarum dalam kulit, penetapan bobot teoritis, penetapan kadar menggunakan kromatografi cair kinerja tinggi, dan stabilitas kimia. Kemudian, dipilih satu formula terbaik dari masing-masing kelompok polimer yang dilanjutkan dengan uji pelepasan obat secara in vitro menggunakan sel difusi Franz dan uji permeasi secara in vivo menggunakan tikus galur Sprague-Dawley. Formula terpilih berdasarkan evaluasi sediaan adalah F3 (AH 10%) dan F5 (PVP-K30 25%). Berdasarkan uji pelepasan obat secara in vitro, jumlah obat terpermeasi dan terdeposisi di dalam kulit pada F3 adalah 247,1 ± 41,85 dan 98,35 ± 12,86 µg. Sedangkan, jumlah obat terpermeasi dan terdeposisi di dalam kulit pada F5 adalah 277,7 ± 55,88 µg dan 59,46 ± 9,25 µg. Berdasarkan uji permeasi obat secara in vivo, hanya satu tikus dari kelompok polimer PVP-K30 dengan konsentrasi 150,32 ng/mL terdeteksi pada plasma tikus. Oleh karena itu, LiH dapat diformulasikan ke dalam sediaan DMN dan mampu terdeposisi ke dalam kulit dengan kadar terpermeasi obat ke dalam sirkulasi sistemik yang masih tergolong aman.

Lidocaine hydrochloride (LiH) is an amide-type local anesthetic agent commonly used in dermatological procedures. LiH is categorized as BCS (biopharmaceutical classification system) class III, which has high solubility and poor permeability. This study aimed to formulate and evaluate lidocaine hydrochloride-loaded dissolving microneedles (LiH-DMN) with different polymers bases, namely poly(vinyl pyrrolidone) K30 (PVP-K30) and hyaluronic acid (HA), as well as conducting drug release test in vitro and in vivo. The evaluations consist of physical evaluation, characterization of loss on drying, mechanical strength characteristics, penetration into the skin, in-skin dissolution, determination of theoretical drug content, determination of drug content using high performance liquid chromatography, and chemical stability. Furthermore, the best formula was selected from each polymer group, followed by in vitro drug release using Franz diffusion cells and in vivo permeation test using Sprague-Dawley rats. The formulas selected based on the evaluation were F3 (HA 10%) and F5 (PVP-K30 25%). Based on the in vitro study, the amount of drug permeated and deposited in the skin at F3 was 247.1 ± 41.85 and 98.35 ± 12.86 µg, respectively. Meanwhile, the amount of drug permeated and deposited in the skin at F5 was 277.7 ± 55.88 and 59.46 ± 9.25 µg. In vivo drug permeation study showed that only one rat from PVP-K30 polymer group with a concentration of 150.32 ng/mL was detected on rat plasma. Therefore, LiH can be formulated into DMN and able to be deposited in the skin with a safe concentration of drug permeated into the systemic circulation."
Depok: Fakultas Farmasi Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Regita Putri
"Berberin hidroklorida merupakan salah satu senyawa aktif yang memiliki berbagai aktivitas famakologi. Penelitian ini bertujuan untuk membuat formulasi solid lipid nanoparticles (SLN) sebagai sistem penghantaran berberin hidroklorida dan meningkatkan absorbsi dari berberin hidroklorida. Pada penelitian ini dibuat empat formula SLN menggunakan metode homogenisasi kecepatan tinggi dan ultrasonikasi menggunakan homogenizer bühler dengan kecepatan 15000 rpm selama 20 menit kemudian disonikasi selama 2 menit. Kemudian sampel tersebut diliofilisasi dengan cara dilakukan freeze drying pada suhu -106°C dan kemudian disimpan pada suhu 4°C. SLN berberin hidroklorida dikarakterisasi yang meliputi ukuran partikel, indeks polidispersitas dan potensial zeta, morfologi dengan Transmission Electron Microscopy (TEM), kadar lembab, penetapan kadar, efisiensi penjerapan, uji pelepasan berberin hidroklorida dari SLN, serta uji stabilitas.
Hasil liofilisasi menunjukkan SLN berberin hidroklorida berupa padatan lunak berwarna kuning. Hasil karakterisasi menunjukkan seluruh formula SLN yang diperoleh memiliki ukuran partikel 125-165 nm, indeks polidispersitas 0,271-0,321 dan nilai potensial zeta dengan rentang nilai -34,2 hingga -41,8 mV. Evaluasi dengan TEM menunjukkan morfologi SLN berberin hidroklorida memiliki ukuran 100 nm dan berbentuk sferis. Kadar lembab dari formula 1, 2, 3 dan 4 berturut-turut 2,19%, 2,99%, 1,97%, 2,38%. Kadar SLN dari formula 1, 2, 3 dan 4 berturut-turut 95,95% %, 95,37%, 96,44%, dan 96,09%. Efisiensi penjerapan formula 1, 2, 3, dan 4 berturut-turut 84,71%, 81,66%, 87,18%, dan 85,59%. Hasil evaluasi pelepasan obat SLN secara berurutan adalah F1 74,64 ± 0,47%, F2 72,90 ± 0,53%, F3 73, 47 ± 0,37%, F4 70,77 ± 0,30%. Berdasarkan hasil yang didapatkan, SLN berpotensi diaplikasikan untuk sistem penghantaran berberin hidroklorida secara oral karena memiliki karakteristik yang baik dengan efisiensi penjerapan yang tinggi.

Berberine hydrochloride is one of the active compounds that has various pharmacologic activities. This study aims to formulate solid lipid nanoparticles (SLN) as a delivery system for berberine hydrochloride and to increase the absorbtion of berberine hydrochloride. In this study, four SLN formulas were made using the high speed homogenization and ultrasonication method using a Bühler homogenizer at a speed of 15000 rpm for 20 minutes then sonicated for 2 minutes. Then the sample was lyophilized by freeze drying at -106°C and then stored at 4°C. SLN berberine hydrochloride was characterized including particle size, polydispersity index and zeta potential, morphology by Transmission Electron Microscopy (TEM), moisture content, drug content, entrapment efficiency, in vitro drug release of berberine hydrochloride from SLN, and stability test. The results of lyophilization showed that SLN with berberine hydrochloride was in the form of a yellow soft solid.
The characterization results showed that all of the SLN formulas obtained had a particle size of 125-165 nm, a polydispersity index of 0.271-0.321 and a zeta potential value with a value range of -34.2 to -41.8 mV. Evaluation by TEM showed morphology of SLN berberine hydrochloride has a size of 100 nm and spherical shape. The water content of formulas 1, 2, 3 and 4 were 2.19%, 2.99%, 1.97%, 2.38%, respectively. The drug content for SLN from formulas 1, 2, 3 and 4 were 95.95% %, 95.37%, 96.44%, and 96.09%, respectively. The entrapment efficiency of formulas 1, 2, 3, and 4 were 84.71%, 81.66%, 87.18%, and 85.59%, respectively. The results of the evaluation of SLN drug release sequentially were F1 74.64 ± 0.47%, F2 72.90 ± 0.53%, F3 73, 47 ± 0.37%, F4 70.77 ± 0.30%. Based on the results obtained, SLN has the potential to be applied to the oral delivery system of berberine hydrochloride because it has good characteristics with high entrapment efficiency.
"
Depok: Fakultas Farmasi Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Sabrina Nur Amalia
"Penggunaan doxorubicin pada pasien kanker payudara digunakan sebagai terapi tambahan dan akan dimetabolisme menjadi metabolit utama, yaitu doxorubicinol. Menurut beberapa penelitian yang telah dilakukan, doxorubicinol yang terakumulasi dalam tubuh manusia dapat meningkatkan risiko kelainan jantung atau memiliki efek kardiotoksik. Polimorfisme dalam karbonil-1-reduktase (CBR1) dapat mempengaruhi kadar doxorubicinol dalam tubuh. Dalam studi ini, analisis doxorubicin hidroklorida dan doxorubicinol dalam sampel Dried Blood Spot (DBS) dari 25 pasien kanker payudara yang menerima doxorubicin dalam rejimen terapeutik mereka telah dilakukan untuk memantau efek toksisitas doxorubicinol. Sampel DBS diekstraksi dengan metode presipitasi protein dan dianalisis menggunakan Ultra Performance Liquid Chromatography tandem Mass Spectrometry (UPLC-MS/MS). Deteksi massa dilakukan dengan mode ESI (+) tipe Multiple Reaction Monitoring (MRM) dengan nilai m/z 544,22> 397,06 untuk doxorubicin m/z 546.22> 363.05 untuk doxorubicinol dan m/z 180.03> 135.16 untuk hexamethylphosphoramide. Metode ini linier dalam kisaran konsentrasi 10-200 ng/mL untuk doxorubicin dan 4-100 ng/mL untuk doxorubicinol. Hasil analisis pada 25 pasien kanker payudara menunjukkan bahwa kadar doxorubicin berada pada kisaran 11,01 ng/mL hingga 93,75 ng/mL dan doxorubicinol adalah 5,80 ng/mL hingga 58,57 ng/mL. Dosis kumulatif semua pasien berada dalam kisaran 49,11 mg/m2 hingga 303,70 mg/m2 yang memiliki tingkat kejadian kardiomiopati <4% (tingkat kejadian kardiomiopati adalah 4% pada 500 hingga 550 mg/m2, 18% pada 551 hingga 600 mg/m2 m2, dan 36% pada> 600 mg/m2).

The use of doxorubicin in breast cancer patients is used as additional therapy and will be metabolized into the main metabolite, namely doxorubicinol. According to several studies that have been done, doxorubicinol which accumulates in the human body can increase the risk of heart abnormalities or have a cardiotoxic effect. Polymorphisms in carbonyl-1-reductase (CBR1) can affect doxorubicinol levels in the body. In this study, analysis of doxorubicin hydrochloride and doxorubicinol in Dried Blood Spot (DBS) samples from 25 breast cancer patients who received doxorubicin in their therapeutic regimen was carried out to monitor the doxorubicinol toxicity effect. DBS samples were extracted by the protein precipitation method and analyzed using Ultra Performance Liquid Chromatography tandem Mass Spectrometry (UPLC-MS/MS). Mass detection is done by ESI (+) type Multiple Reaction Monitoring (MRM) mode with a value of m/z 544.22> 397.06 for doxorubicin; m/z 546.22> 363.05 for doxorubicinol and m/z 180.03> 135.16 for hexamethylphosphoramide. This method is linear in the concentration range of 10-200 ng/mL for doxorubicin and 4-100 ng/mL for doxorubicinol. Analysis of 25 breast cancer patients showed that doxorubicin levels were in the range of 11.01 ng/mL to 93.75 ng/mL and doxorubicinol was 5.80 ng/mL to 58.57 ng/mL. The cumulative doses of all patients are in the range of 49.11 mg/m2 to 303.70 mg/m2 which have a cardiomyopathy rate <4% (cardiomyopathy incidence rate is 4% at 500 to 550 mg/m2, 18% at 551 to 600 mg/m2 m2, and 36% at> 600 mg/m2).
"
Depok: Fakultas Farmasi Universitas Indonesia, 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library