Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 6 dokumen yang sesuai dengan query
cover
Johansyah
Abstrak :
Litium titanat (Li4Ti5O12) merupakan kandidat yang menjanjikan sebagai anoda baterai Lithium-ion. Litium titanat disintesis menggunakan metode solid state dengan mencampurkan TiO2 xerogel yang dibuat dengan metode sol gel dan litium karbonat (Li2CO3) komersil. Dalam penelitian ini digunakan tiga variasi penambahan kadar massa Li2CO3, yaitu 0% (sampel LTO 1), 50% (sampel LTO 2), dan 100% (sampel LTO 3) melebihi stoikiometri. Karakterisasi menggunakan pengujian XRD, FESEM, UV-vis spectroscopy, dan BET telah dilakukan untuk mengetahui pengaruh kadar litium berlebih terhadap struktur, morfologi, dan energi celah pita sampel. Hasil penelitian menunjukkan bahwa ukuran kristalit, ukuran diameter partikel, energi celah pita, dan luas permukaan masing-masing sampel berturut-turut adalah 8,27 nm, 8,44 μm, 3,88 eV untuk sampel LTO 1; 8,22 nm, 8,56 μm, 4,02 eV, 22,529 m2/gr untuk sampel LTO 2; 4,76 nm, 2,07 μm, 4,12 eV, 16,804 m2/gr untuk sampel LTO 3. Selain itu, litium berlebih yang digunakan dalam sintesis Li4Ti5O12 menyebabkan terbentuknya pengotor TiO2 rutile dan Li2TiO3. Senyawa Li4Ti5O12 hanya terbentuk pada sampel LTO 1 dan LTO 2. Untuk mensintesis senyawa Li4Ti5O12 menggunakan metode solid state tanpa menghasilkan pengotor dapat mengacu pada diagram fasa Li2O-TiO2 (28,64% mol Li2O-71,36% mol TiO2).
Lithium titanate (Li4Ti5O12) is a promising candidate for lithium ion battery anode. Lithium titanate was synthesized by solid state method using xerogel TiO2 was prepared by sol gel method and commercial lithium carbonate (Li2CO3). This research varies the content of Li2CO3 addition, 0% (sample LTO 1), 50% (sample LTO 2), and 100% (sample LTO 3) Li2CO3 mass excess. Characterization using XRD, FESEM, UV-vis spectroscopy, and BET testing was performed to observe the effect of adding lithium excess in structure, morphology, and band gap energy. The results show that crystallite size, particle diameter, band gap energy, and surface area of each sample is 8,27 nm, 8,44 μm, 3,88 eV for sample LTO 1; 8,22 nm, 8,56 μm, 4,02 eV, 22,529 m2/gr for sample LTO 2; 4,76 nm, 2,07 μm, 4,12 eV, 16,804 m2/gr for sample LTO 3. Furthermore, the excess of lithium used for Li4Ti5O12 synthesis cause the formation of impurity compound such as rutile TiO2 and Li2TiO3. Li4Ti5O12 compound was successfully syntesized in sample LTO 1 and LTO 2. In order to synthesis pure Li4Ti5O12 without any impurities using solid state method, Li2O-TiO2 phase diagram (28,64% mol Li2O-71,36% mol TiO2) can be used as a reference.
Depok: Fakultas Teknik Universitas Indonesia, 2014
S57004
UI - Skripsi Membership  Universitas Indonesia Library
cover
Reza Pramana Johansyah
Abstrak :
Tesis ini membahas tentang pelaksanaan jabatan Notaris dalam hal pembuatan akta yang didasarkan dari konsep akta yang dibuat dalam dua bahasa dalam kasus putusan Mahkamah Agung Republik Indonesia Nomor 2618 K/Pdt/2013. Adanya penghadap warga negara asing yang dirugikan akibat akta yang tidak dijelaskan oleh Notaris dan dibuat hanya berdasarkan konsep akta dalam dua bahasa. Pokok permasalahan dalam tesis ini adalah sebagai berikut; pertama, peran Notaris dalam pembuatan akta dengan penghadap warga negara asing. Kedua, peran dan tanggung jawab Notaris terhadap minuta akta yang dibuat dalam bahasa Indonesia berdasarkan konsep akta dalam bahasa Inggris pada putusan Mahkamah Agung Republik Indonesia Nomor 2618 K/Pdt/2013. Penelitian ini menggunakan metode penelitian yuridis normatif melalui penelusuran kepustakaan dengan tipologi penelitian deskriptif analitis. Notaris wajib untuk memberikan penyuluhan hukum terkait dengan akta yang akan dibuatnya. Notaris juga wajib memastikan bahwa penghadap warga negara asing telah mengerti dan memahami isi akta yang akan ditandatanganinya.
This thesis discusses the implementation of Notary 39 s duties in the case of making a deed based on the concept of deed made in two languages in the case of Supreme Court of the Republic of Indonesia Decision Number 2618 K Pdt 2013. The existence of foreign citizens who are harmed by a deed that is not read and explained by Notary and made only based on the concept of deed in two languages. The main issues in this thesis are as follows first, the role of Notary in making deed with foreign citizens. Secondly, the roles and responsibilities of Notaries to the Minutes of Deed made in the Indonesian language based on the deed concept in English in the decision of the Supreme Court of the Republic of Indonesia Number 2618 K Pdt 2013. This research uses normative juridical research method through literature search with analytical descriptive research typology. Notary is obliged to provide legal counseling related to the deed to be made. Notary must also ensure that the foreign citizens have understood and understood the contents of the deed to be signed.
Depok: Universitas Indonesia, 2018
T49532
UI - Tesis Membership  Universitas Indonesia Library
cover
Achmad Johansyah
Abstrak :
UU SJSN memberikan kewenangan penyelenggaraan jaminan sosial tenaga kerja kepada BPJS yang secara khusus diatur dalam UU BPJS. Namun dalam praktiknya, hingga saat ini perseroan yang telah ada lebih dahulu dibandingkan BPJS masih menyelenggarakan program jamsostek. Hal ini tentunya berdampak kepada kepastian penyelenggaraan jamsostek. Permasalahan yang dikaji adalah: 1. Bagaimana penyelenggaraan jamsostek di Indonesia berdasarkan SJSN? 2. Bagaimana kewenangan penyelenggaraan jamsostek setelah adanya putusan Mahkamah Konstitusi Nomor 007/PUU-III/2005? 3. Bagaimana kepastian perolehan manfaat jamsostek bila penyelenggaraanya tidak berdasarkan SJSN? Penelitian ini menggunakan pendekatan yuridis-normatif bersifat deskriptif. Jenis data yang digunakan adalah data sekunder melalui penelusuran literatur hukum dan kepustakaan. Adapun hasil penelitian yakni: 1. Jamsostek berdasarkan SJSN dilaksanakan berdasarkan ketentuan UU SJSN dan UU BPJS yang kewenangan penyelenggaraannya oleh BPJS dengan berlandaskan 3 asas dan 9 prinsip. 2. Kewenangan penyelenggaraan jamsostek setelah adanya putusan Mahkamah Konstitusi Nomor 007/PUU-III/2005, penyelenggaraan jaminan sosial yang sebelumnya dilaksanakan oleh perseroan BUMN bertentangan dengan UUD 1945 dan tidak memiliki kekuatan hukum mengikat sehingga kewenangan penyelenggaraan jamsostek dilaksanakan berdasarkan UU SJSN dan UU BPJS yakni oleh BPJS Ketenagakerjaan. 3. Penyelenggaraan jamsostek yang oleh Perseroan mengakibatkan ketidakpastian perolehan hak jamsostek, khususnya program jamsostek yang baru yaitu program Jaminan Kehilangan Pekerjaan yang penyelenggaraannya diamanatkan kepada BPJS Ketenagakerjaan ......The SJSN Law gives the authority to administer social security for workers to BPJS which is specifically regulated in the BPJS Law. However, in practice, up to now, companies that already existed before BPJS still held the Jamsostek program. This of course has an impact on the certainty of the implementation of Jamsostek. The problems studied are: 1. How is the implementation of Jamsostek in Indonesia based on the SJSN? 2. What is the authority for administering Jamsostek after the Constitutional Court's decision Number 007/PUU-III/2005? 3. How is the certainty of obtaining Jamsostek benefits if the implementation is not based on the SJSN? This research uses a descriptive-normative approach. The type of data used is secondary data through legal literature and literature searches. The results of the research are: 1. Social Security based on SJSN is implemented based on the provisions of the SJSN Law and the BPJS Law whose administration is authorized by BPJS based on 3 principles and 9 principles. 2. The authority to administer Jamsostek after the decision of the Constitutional Court Number 007/PUU-III/2005, the implementation of social security previously implemented by BUMN companies was contrary to the 1945 Constitution and did not have binding legal force so that the authority to administer Jamsostek was implemented based on the SJSN Law and the BPJS Law, namely by BPJS Employment. 3. The implementation of Jamsostek which by the Company causes uncertainty in obtaining Jamsostek rights, in particular the new Jamsostek program, namely the Job Loss Guarantee program whose implementation is mandated by BPJS Ketenagakerjaan.
Depok: Fakultas Hukum Universitas Indonesia, 2022
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Marliani Johansyah
Jakarta: LD FE UI, 1986
312.9 JOH p
Buku Teks  Universitas Indonesia Library
cover
Muhammad Iqbal Johansyah
Abstrak :
Skripsi ini membahas mengenai kaitan tipe nisan dengan status sosial. Penelitian ini dilakukan di Kompleks Makam Sunan Gunung Jati Halaman 1,2, dan 3. Bentuk penelitian dilakukan untuk mengungkap keterkaitan antara tipe nisan dengan tingkatan halaman dan gelar kebangsawanan. Hasil analisis menunjukan bahwa tidak terdapat kaitan antara tipe nisan dengan tingkatan halaman maupun antara tipe nisan dengan gelar kebangsawanan, tetapi terdapat kaitan antara gelar kebangsawanan dengan tingkatan halaman. ......This undergraduate thesis is focused on the relation between the type of gravestone with social status. This research is executed in The Grave Complex of Sunan Gunung Jati. From this research uncovering correlation among type of gravestone with yard levels and title of nobility. The result from the analysis shows that there_s no relation between type of gravestone with the title of nobility. Hence, there is relation between the title of nobility with the yard levels.
Depok: Fakultas Ilmu Pengetahuan dan Budaya Universitas Indonesia, 2009
S11929
UI - Skripsi Open  Universitas Indonesia Library
cover
Doni Johansyah
Abstrak :
Bijih nikel laterit merupakan sumber bahan tambang yang berperan penting dalam produksi nikel dunia. Di Indonesia, bijih nikel laterit merupakan sumber daya yang melimpah. Bijih nikel laterit digolongkan menjadi dua jenis, yaitu saprolit yang berkadar nikel tinggi dan limonit yang berkadar nikel rendah. Tetapi hingga saat ini limonit belum dapat dimanfaatkan dengan baik, padahal jumlahnya jauh lebih besar daripada saprolit. Oleh karena itu, perlu dikembangkan metode yang efisien dan ekonomis agar limonit dapat dimanfaatkan. Penelitian ini bertujuan untuk mengetahui efek dari reduksi pemanggangan dan pengaruh waktu pelindian amonium bikarbonat pada bijih limonit. Metode yang dilakukan dalam penelitian ini meliputi reduksi pemanggangan dan pelindian amonium bikarbonat yang dikarakterisasi menggunakan Energy Dispersive X-ray (EDX), X-ray Diffraction (XRD), dan Atomic Absorption Spectroscopy (AAS) untuk mengetahui kandungan unsur dan senyawa yang terdapat dalam sampel. Dari penelitian yang dilakukan diketahui bahwa terjadi perubahan senyawa dari (FeO)OH menjadi Fe2O3, Fe3O4, dan FeNi pada sampel setelah proses reduksi pemanggangan serta terjadi peningkatan persen perolehan nikel hingga mencapai 1,88% akibat penambahan waktu pelindian selama 120 menit. ......One form of innovation to reduce the time spent on the production of ships and ship production costs is make a connection to the shape steel plates in the hull without bending or forming process on the curvature the hull to get a streamline hull shape. Technically innovation method of make the ship's hull with a flat plate have an influence in change the stability and strength of the transverse vessels. Thus it is necessary for the calculation to determine how much influence these changes to the safety of the ship. In this research the stability of ship use Maxsurf Software approach. For the calculation of Ship stability use standard IMO. For the calculation of the transverse strength of ships use standard Bureau Classification Indonesia (BKI) and modeling approaches transverse strength analysis use CATIA Software. From the results is obtained analysis of ship stability is good and has fulfilled criteria IMO. Review from the modeling of the transverse strength at least ship midship 0.4L. On the first condition in midship has maximum working stress on the base bulkhead is 1.59 x 1011 N/m2. On the second condition in midship bulkhead have arch as high as 384 mm and maximum working stress is 1.0757 x 1011 N/m2. On the third condition in midship bulkhead has arch as high as 150 mm and maximum working stress is 1.08 x 1011 N/m2. Safety factor in the first condition is 1.25, second condition is 1.85, and third condition is 1.85.
Depok: Fakultas Teknik Universitas Indonesia, 2012
S1949
UI - Skripsi Open  Universitas Indonesia Library