Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 24 dokumen yang sesuai dengan query
cover
Arya Aditya Purbadi
"Salah satu metode untuk menentukan keberadaan ion logam dalam suatu sampel adalah dengan senyawa pengkelat yang mampu berfluorosensi dalam bentuk kompleksnya. Senyawa ligan pengkelat yang dimanfaatkan dalam penelitian ini adalah ligan 2-(1-metil-5-fenil-4,5-dihidro-1H-pirazol-3-yl)piridin. Senyawa ligan tersebut disintesis dengan dua tahap yakni tahap kondensasi Claisen-Schmidt dan tahap penambahan metil hidrazin berlebih. Karakterisasi senyawa ligan yang disintesis dilakukan dengan bantuan instrumentasi seperti spektroskopi FTIR dan NMR. Eksperimen ini bertujuan untuk mempelajari pengaruh konsentrasi ion logam Cu2+ dan Fe3+ yang dikelatkan dengan ligan 2-(1-metil-5-fenil-4,5-dihidro-1H-pirazol-3-yl)piridin, terhadap kemampuannya berfluorosensi sebagai senyawa kompleks.
Selektivitas ligan dalam mengkelat ion logam-pun dipertimbangkan. Variasi konsentrasi kedua ion logam diurutkan dari 0,001; 0,002; 0,003; 0,004; 0,005; 0,006; 0,007; 0,008; 0,009 dan 0,01 mol L-1, dalam keberadaan 0,01 mol L-1 senyawa ligan. Dari hasil penelitian ini, ditemukan bahwa seiring peningkatan konsentrasi ion Cu2+ pada kompleks Cu-ligan, emisi fluorosensinya semakin meredup, pada panjang gelombang 255 nm. Hal yang sama terjadi pada kompleks Fe-ligan, terjadi peredupan emisi seiring dengan meningkatnya konsentrasi Fe3+ pada kompleks Fe-ligan, di atas konsentrasi Fe3+ 0,028 mol L-1, pada panjang gelombang 509 nm. Pada uji selektivitasnya, tercatat bahwa ligan ligan 2-(1-metil-5-fenil-4,5-dihidro-1H-pirazol-3-yl)piridin lebih senang mengkelat ion Fe3+ dibandingkan Cu2+.

One of the method to determine the presence of metal ions in a certain sample, is by using a chelating ligand that gives fluorescent emission when forming it?s complex compound. The ligand compound utilized in this experiment is 2-(1-methyl-5-phenyl-4,5-dihydro-1H-pyrazol-3-yl)pyridine. The organic ligand was synthesized using a two-step reaction: the first step is a Claisen-Schmidt condensation reaction, the second step is the addition of excess methyl hydrazine. Characterization of the ligand synthesized in this experiment, was done by using instruments such as FTIR spectroscopy and NMR. This experiment was to study the effect of Cu2+ and Fe3+ concentrations that were chelatet by 2-(1-methyl-5-phenyl-4,5-dihydro-1H-pyrazol-3-yl)pyridine ligand, on the fluorescent abilities of their respective complex compounds.
The selectivity of the ligand on chelating the two metal ions, was also taken to account. The concentration of both metal ions were varied from 0.001, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009 dan 0.01 mol L-1, in the presence of 0.01 mol L-1 ligand. From the experimental results, it is shown that as the concentration of Cu2+ increased in Cu-ligand complex, the fluorescent emission became dimmer, at wavelength 385 nm. The same thing happened with Fe-ligand complex, the fluroscent emission of Fe-ligand became dimmer as the concentration increased, at wavelength 509 nm. In the selectivity test, it was shown that 2-(1-methyl-5-phenyl-4,5-dihydro-1H-pyrazol-3-yl)pyridine ligand was more favorable to chelate Fe3+ ions instead of Cu2+.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2016
S64231
UI - Skripsi Membership  Universitas Indonesia Library
cover
Resi Annisaa Rubianti
"ABSTRAK
Sintesis MOFs berbasis logam lantanida dipelajari menggunakan Lanthanum-MOFs dan Yttrium-MOFs dengan monosodium 2-sulfoterephthalate MSBDC sebagai ligan dengan metode solvothermal. Lanthanum dan Yttrium dipilih karena radius logam besar yang diharapkan dapat meningkatkan kinerja katalis dengan meningkatkan luas permukaan katalis, sedangkan ligan MSBDC dipilih karena memiliki gugus fungsi penarik elektron sehingga katalis diharapkan menjadi lebih asam. Setelah materi MOFs telah berhasil disintesis, karakterisasi oleh FTIR, TGA, dan XRD dilakukan. Katalis diaplikasikan dalam reaksi konversi glukosa menjadi 5-hidroksimetilfurfural 5-HMF dan produk dianalisis dengan HPLC. Hasilnya menunjukkan bahwa penambahan waktu reaksi akan meningkatkan hasil 5-HMF. Selanjutnya, dalam pekerjaan ini, kedua katalis memberikan aktivitas katalitik yang sama, sekitar 4,54 yield.

ABSTRACT
Synthesis of lanthanide metal based MOFs was studied using Lanthanum MOFs and Yttrium MOFs with monosodium 2 sulfoterephthalate MSBDC as a ligand by solvothermal method. Lanthanum and Yttrium was selected due to a large metal radius which is expected to improve catalyst performance by increasing its surface area, while MSBDC ligand is selected because it has electron pulling function groups so that the catalyst is expected to become more acidic. After MOFs material has been successfully synthesized, characterization by FTIR, TGA, and XRD are performed. The catalyst was applied in the conversion of glucose to 5 hydroxymethylfurfural 5 HMF and the product was analysed with HPLC. The result shows that elongation time will increase the yield of 5 HMF. Furthermore, in this work, both catalysts give similar catalitic activity, approximately 4.54 yield."
2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Defi Sulistyoningsih
"Jenis logam berat yang sering ditemui sebagai pencemar di perairan Indonesia adalah Timbal (Pb) dan Kadmium (Cd). Metode pendeteksian logam berat yang telah banyak dikembangkan sebelumnya tidak dapat dilakukan secara on-site dan masih membutuhkan biaya yang mahal. Salah satu alat yang berpotensi untuk mengatasi hal tersebut adalah paper electroanalytical device (PAD). Penelitian yang akan dilakukan adalah memfabrikasi paper electroanalytical device (PAD) dengan metode gabungan, yaitu metode elektrokimia dan kolorimetri. Material kertas yang akan digunakan adalah Whatman no.1 yang difabrikasi dengan metode wax printing dan screen printed carbon electrode (SPCE). Pada bagian elektrokimia, working electrode akan dimodifikasi dengan menggunakan nanopartikel emas (AuNPs) untuk meningkatkan performa perangkat elektrokimia pada PAD. Pada bagian kolorimetri, AuNPs yang dimodifikasi dengan tiosulfat (S2O32-) akan digunakan sebagai reagen deteksi. Hasil pengujian elektrokimia, deposisi AuNPs pada elektroda kerja meningkatkan nilai sensitivitas sebesar 48,1% pada logam Pb dan 77,3% pada logam Cd. Pada pengukuran logam Pb, nilai LOD sebesar 21,8 ppb menurun menjadi 13,7 ppb, dan untuk nilai LOQ dari 72,8 ppb menjadi 45,96 ppb. Sedangkan, pada pengukuran Cd nilai LOD sebelum deposisi sebesar 23 ppb, dan menurun menjadi 18 ppb, dan untuk LOQ dari 77,5 ppb menurun menjadi 62,1 ppb. Hasil pengujian kolorimetri menunjukkan bahwa sampel lingkungan 1 mengandung 68,2 ppb logam Pb dan sampel lingkungan 2 mengandung 65,4 ppb logam Pb.

The heavy metals that are often found as pollutants in Indonesian waters are Lead (Pb) and Cadmium (Cd). Heavy metal detection methods developed previously cannot be carried out on-site and still require high costs. One tool that has the potential to overcome this is a paper electroanalytical device (PAD). The research to be carried out is to fabricate paper electroanalytical devices (PAD) with a combined method, namely electrochemical and colourimetric methods. The paper material to be used is Whatman no.1, which was fabricated using the wax printing and screen printed carbon electrode (SPCE) method. In the electrochemistry section, the working electrode will be modified using gold nanoparticles (AuNPs) to improve the performance of electrochemical devices on PAD. In the colourimetry section, AuNPs modified with thiosulfate (S2O22-) will be used as a detection reagent. The electrochemical test results showed that the deposition of AuNPs on the working electrode increased the sensitivity value by 48.1% for Pb metal and 77.3% for Cd metal. In the measurement of Pb metal, the LOD value of 21.8 ppb decreased to 13.7 ppb, and the LOQ value from 72.8 ppb to 45.96 ppb. Meanwhile, for Cd measurements, the LOD value before the deposition was 23 ppb and decreased to 18 ppb, and for LOQ, from 77.5 ppb, it decreased to 62.1 ppb. The results of the colorimetry test showed that environmental sample 1 contained 68.2 ppb of Pb metal and environmental sample 2 contained 65.4 ppb of Pb metal."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fanny Mourencia
"Paparan logam berat dapat menimbulkan risiko atau dampak buruk bagi kesehatan manusia. Sebagian besar logam berat ini diekskresikan melalui keringat. Pada penelitian ini, disintesis hidrogel poli(2-(dimetilamino)etil metakrilat-ko-N,N-dimetilakrilamida) (P(DMAEMA-ko-DMA)) dengan variasi komposisi monomer melalui reaksi polimerisasi radikal bebas dengan amonium persulfat (APS) sebagai inisiator dan N,N’-metilenbis(akrilamida) (MBA) sebagai agen pengikat silang. Dilakukan karakterisasi FTIR dan uji swelling pada hidrogel hasil sintesis. Diketahui bahwa rasio swelling meningkat seiring dengan peningkatan komposisi monomer DMAEMA pada hidrogel. Hidrogel P(DMAEMA-ko-DMA) menunjukkan responsivitas terhadap pH dan temperatur, ditunjukkan oleh tren penurunan rasio swelling seiring dengan peningkatan pH dan temperatur. Hidrogel kopolimer dengan komposisi DMAEMA terbesar memiliki rasio swelling tertinggi pada rentang pH dan temperatur keringat. Selain itu, hidrogel P(DMAEMA-ko-DMA) dapat digunakan sebagai adsorben ion logam berat Cd(II) dan Pb(II) pada kondisi keringat, baik dalam larutan tunggal maupun multikomponen. Kapasitas adsorpsi ion logam berat Cd(II) > Pb(II), dan kapasitas adsorpsi meningkat seiring dengan penurunan temperatur. Semakin tinggi konsentrasi awal larutan logam berat, semakin banyak ion logam berat yang dapat teradsorpsi.

Heavy metal exposure may pose risks or adverse effects to human health. Most of these heavy metals are excreted through sweat. In this research, poly(2-(dimethylamino)ethyl methacrylate-co-N,N-dimethylacrylamide) (P(DMAEMA-co-DMA)) hydrogels with variations in monomer composition were synthesized through a free radical polymerization reaction with ammonium persulfate (APS) as the initiator and N,N’-methylenebis(acrylamide) (MBA) as the cross-linking agent. FTIR characterization and swelling ability tests were conducted on the synthesized hydrogels. It was observed that the swelling ratio increased with an increase in the DMAEMA monomer composition in the hydrogel. The P(DMAEMA-co-DMA) hydrogels exhibited responsiveness to pH and temperature, as indicated by a decreasing trend in the swelling ratio with increasing pH and temperature. The copolymer hydrogel with the highest DMAEMA composition showed the highest swelling ratio within the range of sweat pH and temperature. Furthermore, the P(DMAEMA-co-DMA) hydrogel could be utilized as an adsorbent for heavy metal ions Cd(II) and Pb(II) under sweat conditions, both in single and multicomponent solutions. The adsorption capacity for Cd(II) ions was greater than that for Pb(II) ions, in addition, the adsorption capacity increased with a decrease in temperature. The higher the initial concentration of heavy metal solution, the more heavy metal ions can be adsorbed. "
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhamat Syahroni
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2000
S29682
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nur Amalina Qismina Fajrianti
"Sintesis zeolit NaY dari zeolit alam Bayat dilakukan melalui metode hidrotermal dengan teknik seeding. Sintesis dilakukan berdasarkan komposisi Al2O3: 10 SiO2: 10,3 Na2O: 180,3 H2O rasio molar . Sebelum dilakukan sintesis, zeolit alam Bayat dipreparasi melalui proses purifikasi dan depolimerisasi. Hasil XRD menunjukkan bahwa zeolit yang dihasilkan merupakan zeolit NaY yang didominasi oleh kerangka sodalite. Hasil SEM-EDX memperlihatkan morfologi zeolit NaY seperti tumpang tindih dengan rasio Si/Al sebesar 2,30. Berdasarkan penelitian, zeolit NaY hasil sintesis memiliki sisi aktif yang besar sehingga dapat berperan menjadi adsorben ion logam kadmium II dan kobalt II. Hal ini dibuktikan dengan kapasitas adsorpsi ion kadmium II rata-rata zeolit NaY hasil sintesis lebih tinggi daripada kapasitas rata-rata adsorpsi dari zeolit alam Bayat raw pada waktu optimum 120 menit, 33,46 mek/100 g untuk zeolit alam Bayat raw dan 105,60 mek/100 g untuk zeolit NaY hasil sintesis. Kapasitas adsorpsi ion kobalt II rata-rata zeolit NaY hasil sintesis juga lebih tinggi daripada kapasitas rata-rata adsorpsi dari zeolit alam Bayat raw pada waktu optimum 120 menit, 12,88 mek/100 g untuk zeolit alam Bayat raw dan 78,25 mek/100 g untuk zeolit NaY hasil sintesis. Nilai kapasitas tukar kation zeolit alam Bayat raw adalah sebesar 24,41 mek/100 gram zeolit, sedangkan nilai kapasitas tukar kation zeolit NaY hasil sintesis adalah sebesar 43,45 mek/100 gram zeolit.

NaY zeolite was hydrothermally synthesized using seeding technique. The synthesis were performed according to the following composition of Al2O3 10 SiO2 10.3 Na2O 180.3 H2O molar ratio . XRD pattern confirmed that the structure was NaY zeolite. Before synthesis, natural zeolite Bayat were prepared through purification and depolymerization. From XRD measurement, it is observed that zeolite structures are dominated by sodalite framework. SEM EDX showed that NaY crystals were intergrowth with Si Al ratio of 2.30. In this study, NaY zeolite synthesized has more active sites to adsorb cadmium II and cobalt II ions because the average adsorption capacity cadmium II ions of as synthesized NaY zeolite is higher than the average adsorption capacity of raw Bayat natural zeolite at its optimum contact time 120 minutes, 33.46 meq 100 g for raw natural zeolite Bayat and 105.60 meq 100 g for as synthesized NaY zeolite. The average adsorption capacity cobalt II ions of as synthesized NaY zeolite is also higher than the average adsorption capacity of raw Bayat natural zeolite at its optimum contact time 120 minutes, 12.88 meq 100 g for raw natural zeolite Bayat and 78.25 meq 100 g for as synthesized NaY zeolite. The cation exchange capacity of raw Bayat natural zeolite is 24.41 meq 100 gram zeolite, besides the cation exchange capacity of as synthesized NaY zeolite is 43.45 meq 100 gram zeolite.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2016
S66142
UI - Skripsi Membership  Universitas Indonesia Library
cover
Melita Rachma
"Ligan 1,4-bis-(1-phenyl-5-(pyridin-2-yl)-1H-pyrazol 3- yl)benzena telah berhasil disintesis menggunakan metode kondensasi Claisen-Schmidt. Hasil yang diperoleh berupa padatan oranye kecokelatan dan dikarakterisasi menggunakan spektrofotometer UV-Vis, spektrofotometer inframerah dan spektrometer NMR. Aplikasi ligan ini sebagai fluorosensor untuk ion logam Cd2+ dan Pb2+ dilakukan dengan menggunakan spektrofluorometer. Hasil studi fluoresensi menunjukkan bahwa ligan mempunyai intensitas fluoresensi yang kuat. Hal ini didukung oleh nilai absorptivitas molar (ε) yang besar.
Studi spektroskopi UV-Vis pada penambahan ion Cd2+ dan Pb2+ menunjukkan munculnya puncak baru pada daerah panjang gelombang 355-356 nm. Hal ini menunjukkan bahwa terbentuk kompleks antara ion logam (Cd2+ dan Pb2+) dengan ligan 1,4-bis-(1-phenyl-5-(pyridin-2-yl)-1H-pyrazol 3- yl)benzena. Studi aplikasi fluorosensor menunjukkan bahwa ligan ini dapat dijadikan fluorosensor tipe off-on untuk ion Cd2+ karena penambahan ion ini menyebabkan peningkatan intensitas fluoresensi dan fluorosensor tipe on-off untuk ion Pb2+ karena penambahan ion ini menyebabkan penurunan intensitas fluoresensi.

Ligand 1,4-bis-(1-phenyl-5-(pyridin-2-yl)-1H-pyrazol-3-yl)benzene has been synthesized using Claisen-Schmidt condensation method. The solid orange brown precipitate was characterized by UV-Visible spectrophotometer, Infrared spectrophotometer and NMR spectrometer. The application of this ligand as fluorosensor for Cd2+ and Pb2+ metal ions was studied by using spectrofluorometer. Fluorescence studies indicate that the ligand has a strong fluorescence intensity. This is supported by a large molar absorptivity (ε) value.
UV-Vis spectroscopy studies on the addition of Cd2+ and Pb2+ ions showed the emergence of a new peak at 355-356 nm wavelength region. This indicates that the complexes formed between metal ions (Cd2+ and Pb2+) with 1,4-bis-(1-phenyl-5-(pyridin-2-yl)-1H-pyrazol3-yl)benzene ligand. Application fluorosensor studies showed that these ligands can be used as off-on type fluorosensor for Cd2+ ions due to the addition of these ions causes an enhanced in fluorescence intensity and fluorosensor on-off type for Pb2+ ions due to the addition of these ions causes a quenched in fluorescence intensity.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2016
T47538
UI - Tesis Membership  Universitas Indonesia Library
cover
Shafira Muzdalifah
"Kebanyakan permasalahan pencemaran air saat ini diakibatkan oleh adanya logam berat. Untuk itu diperlukan adsorben untuk mengurangi permasalahan pencemaran logam berat tersebut. Pada penelitian ini dibuat adsorben ion logam berbasis selulosa dengan gugus fungsional sulfonat. Selulosa terlebih dahulu di iradiasi menggunakan berkas elektron dengan variasi dosis 20, 30 dan 40 kGy. Kemudian dicangkokkan menggunakan metode prairadiasi ke monomer Glycidyl Methacrylate GMA dengan variasi konsentrasi 1 , 2,5 dan 5.
Hasil optimum selulosa yang tercangkok GMA dimodifikasi menggunakan gugus fungsional sulfonat untuk diaplikasikan sebagai adsorben ion logam timbal. Hasil sintesis kopolimer selulosa-GMA-sulfonat dikarakterisasi dengan FTIR, DSC dan AAS. Diperoleh hasil dengan persen pencangkokkan selulosa-GMA efisien pada dosis 40 kGy dan konsentrasi monomer GMA sebesar 107.62.
Sintesis selulosa-GMA-sulfonat optimum adalah pada suhu 80 C dengan konsentrasi 1N. Kapasitas adsorpsi ion logam timbal diperoleh sebesar 8,476 mg/g pada kondisi pH 7, waktu kontak 150 menit dan konsentrasi ion logam timbal 20 ppm. Isoterm adsorpsi yang sesuai untuk adsorben selulosa-GMA-sulfonat ialah model isoterm Langmuir dengan nilai regresi 0,974. Kinetika adsorpsi adsorben selulosa-GMA-sulfonat diperoleh mengikuti orde reaksi pertama. Berdasarkan hasil yang diperoleh, adsorben kopolimer selulosa GMA termodifikasi sulfonat dapat meningkatkan penyerapan ion logam timbal.

Currently the most water pollution problems are caused by the heavy metals. Therefore, an adsorbent to reduce the problem of heavy metal pollution is needed. In this research, an adsorbent metal ion based on cellulose made with sulfonate functional group. First of all, the cellulose is being irradiated using the electron beam with a variation of irradiated dose 20, 30 and 40 kGy then being grafted using a pre irradiation method to Glycidyl Methacrylate monomer GMA with a variation of the concentration 1 , 2,5 and 5.
The cellulose grafted GMA is modified using a sulfonate functional group in optimum conditions to be applied as a lead metal ion adsorbent. The result of copolymer synthesis of cellulose GMA sulfonate was charactherized with FTIR, DSC and AAS. The percent yield of efficient cellulose GMA irradiated with 40 kGy radiation doses and GMA monomer concentration was 107.62.
The optimum condition of cellulose GMA sulfonate synthesis is at 80 C with 1N concentration. The present adsorption capacity of lead metal ion solution equal to 8,476 mg g, the required solution is needed to be at pH 7, 150 minutes contact time and with 20 ppm concentration of lead metal ions. An appropriate adsorption isotherm represented for cellulose GMA sulfonate adsorbent is Langmuir isotherm model with a regression value at 0.974. The adsorbent kinetics of cellulose GMA sulfonate adsorbents is obtained following the first order reaction. Based on the results, the modified cellulose GMA Sulphonate cellulose copolymer can increase the absorption of lead metal ions.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
S67232
UI - Skripsi Open  Universitas Indonesia Library
cover
Shidiq Trianto
"Fly ash sebagai limbah padat dari pembangkit listrik dan senyawa karbonat hasil absorpsi CO2 belum termanfaatkan secara maksimal. Pada penelitian ini bertujuan untuk mengetahui pengaruh pengaruh jenis alkali aktivator dan rasio alkali aktivator dengan fly ash batubara dalam pembuatan material geopolimer. Jenis alkali aktivator yang dipakai NaOH/Na2CO3, NaOH/NaHCO3, KOH/K2CO3, KOH/KHCO3, dan NaOH/Na2SiO3. Sedangkan rasio alkali aktivator dengan fly ash (rasio AA/FA) yang digunakan adalah 0,10, 0,20, dan 0,30. Rata-rata kuat tekan pada penggunaan alkali aktivator KOH sebesar 8,431 MPa dan pada NaOH sebesar 7,923 MPa. Kuat tekan terbaik pada KOH/K2CO3 rasio 0,1 (rasio massa) dengan kuat tekan 24,284 MPa dan lebih besar 34,1% dari pada kuat tekan pada semen Portland yang hanya 18,104 MPa. Terjadinya reaksi geopolimerisasi ditanadai dengan adanya kristal moganit, ferinatrit, gehlenit, koesit, kristobalit, kuarsa, mikroklin, kiesirite, nosean, ortoenstatit, dan hematit. Ikatan geopolimer terbentuk untuk semua jenis alkali aktivator dengan adanya Si-O/Al-O, T-O-Si (T= Si/Al), dan Si-O-Si pada fingerprint region.

Fly ash as solid waste from power plants and carbonate compounds from CO2 absorption products have not been used optimally. This study aims to determine the effect of the type of alkali activator and the ratio of alkali activator with coal fly ash in the manufacture of geopolymer materials. The type of alkaline activator used is NaOH/Na2CO3, NaOH/NaHCO3, KOH/K2CO3, KOH/KHCO3, dan NaOH/Na2SiO3. While the ratio of alkali activator to fly ash (AA/FA ratio) used was 0.10, 0.20, and 0.30. The average compressive strength of KOH’s alkaline activator is 8,431 MPa and for NaOH 7,923 MPa. The best compressive strength is KOH/K2CO3 with ratio 0.1 (mass ratio) and this variation gives compressive strength result is 24.284 MPa and 34.1% higher than the compressive strength of Portland cement which is only 18.104 MPa. The geopolymerization reaction occurs by the presence of crystals of moganite, gehlenite, coesite, cristobalite, quartz, microcline, kiesirite, nosean, orthoenstatite, and hematite. Geopolymer bonds were formed for all types of alkaline activators in the presence of Si-O/Al-O, T-O-Si (T= Si/Al), and Si-O-Si in the fingerprint region."
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Yang V. Li, editor
"Stroke is a major cause of death and disability in the U.S. and worldwide. A variety of pathophysiologic episodes or cellular medications occur following a stroke, and knowledge of these aftermath events can lead to potential therapeutic strategies that may reverse or attenuate stroke injury. Cellular events that occur following stroke include the excessive releases of excitatory amino acids, alterations in the genomic responses, mitochondrial injury producing reactive oxygen and nitrogen species (ROS), and secondary injury, often in the setting of reperfusion."
New York: [, Springer], 2012
e20417622
eBooks  Universitas Indonesia Library
<<   1 2 3   >>