Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 338 dokumen yang sesuai dengan query
cover
Rizky Dirga Harya Putera
"ABSTRAK
Eceng gondok tergolong serat alam yang keberadaannya melimpah di Indonesia. Serat alam ini tersusun atas serat selulosa yang merupakan komponen struktural utama dinding sel tanaman hijau. Untuk mendapatkan serat selulosa dari eceng gondok, dilakukan beberapa perlakuan. Pada penelitian ini dilakukan perlakuan pengekstrakkan serat selulosa secara kimiawi, antara lain proses dewaxing, penghilangan hemiselulosa, delignifikasi, tahap pendapatan selulosa murni, dan tahap pengeringan. Digunakan variasi pelarut, yakni Sodium Chlorite (NaClO2), Hydrocloric Acid (HCl), dan Hydrogen Peroxide (H2O2), yang bertujuan untuk mengetahui pelarut mana yang paling efektif dalam pengekstraksian serat selulosa tanaman eceng gondok. Didapatkan pada penelitian ini bahwa, pelarut NaClO2 dinilai paling efektif untuk ekstraksi serat selulosa. Hal ini berdasarkan dari gugus fungsi serat yang terbentuk pada analisis FTIR (Fourier Transform Infrared), karakteristik termal yang didapat dari analisis TGA (Thermogravimetric Analysis), dan dari kandungan hemiselulosa yang paling sedikit dibandingkan dengan pelarut lainnya dari analisis HPLC (High Pressure Liquid Chromatography).

ABSTRACT
Water hyacinth, classified as a natural fibres that is abundance in Indonesia. This natural fibre consists of cellulose fibres which is the main structural component of cell wall of green plant. To obtain cellulose fibers, chemical treatment such as dewaxing, removal of hemicelluloce component, delignification, until drying process of cellulose fibre have been made in this research. Variation of solvent is used, Sodium Chlorite (NaClO2), Hydrogen Peroxide (H2O2), and Hydrocloric Acid (HCl) Ammonia, with a purpose to determine which are the most effective solvent in this extraction. From this study, we obtained that the most effective solvent in the extraction of cellulose fibre from water hyacinth plant is NaClO2 solution. It is based on the functional group formed on the analysis of FTIR (Fourier Transform Infrared), thermal characteristic obtained from thermagravimetric analysis, and content of hemicellulose from high pressure liquid chromatography analysis."
Depok: Fakultas Teknik Universitas Indonesia, 2012
S43696
UI - Skripsi Open  Universitas Indonesia Library
cover
Riajeng Kristiana
"ABSTRAK
Kapang rizosfer mempunyai kemampuan menghambat
Fusarium oxysporum f.sp. lycopersici (Sacc.) W.C. Snyder & H.N. Hans.
penyebab penyakit layu pada tanaman tomat (Lycopersicon esculetum Mill.).
Kapang rizosfer diisolasi dari daerah perakaran tanaman tomat di lahan
konvensional Desa Cikahuripan dan Sukamulya, Sukabumi. Tujuh belas spesies
yang antagonis terhadap F. oxysporum f.sp. lycopersici telah diidentifikasi dari 47
isolat yang diisolasi dan 2 isolat koleksi LIPI MC. Mekanisme antagonis untuk
mengendalikan patogen terlihat beragam dari tiap spesies kapang rizosfer.
Kompetisi dengan kapang patogen terlihat pada Trichoderma sp. dan Mucor sp.
Semua isolat kapang rizosfer memproduksi agen antifungi volatil bukan HCN dan
tidak dapat memproduksi enzim kitinase. Kapang rizosfer memproduksi agen
antifungi non-volatil iturin yaitu Aspergillus fumigatus Fres., Aspergillus niger
Van Tieghem, dan 2 isolat Aspergillus sp. Enzim protease diproduksi oleh
A. fumigatus, Aspergillus sp., Fusarium oxysporum Schlecht, dan
Humicola fuscoatra Traaen. Aspergillus niger dan Penicillium sp., merupakan
kapang rizosfer yang memproduksi agen antifungi non-volatil dan volatil terhadap
patogen. Baik pada suspensi konidia patogen yang disimpan 4° C dan tidak
disimpan dalam lemari pendingin yang diberi agen antifungi non-volatil
Aspergillus niger (1:1) memperlihatkan persentase hambatan pertumbuhan
konidia patogen tertinggi masing-masing 77,97 % dan 76,08 % pada pengamatan
jam ke-8. Agen antifungi non-volatil Aspergillus niger pada berbagai konsentrasi
meningkatkan perkecambahan tomat masing-masing 4,17 % pada benih tomat
yang diberi filtrat atau suspensi konidia patogen yang diinkubasi selama 30 menit.
Sedangkan waktu inkubasi 60 menit, agen antifungi non-volatil A. niger pada
berbagai konsentrasi meningkatkan perkecambahan tomat 5,25 %?21,04 % pada
benih tomat yang diberi suspensi konidia patogen dan menurunkan
perkecambahan tomat 6,38 %?13,04 % pada benih tomat yang diberi filtrat
patogen. Perpanjangan waktu inkubasi 30 menit menghambat selama 4 hari
kolonisasi patogen pada tomat yang diberi campuran filtrat atau suspensi konidia
patogen dan agen antifungi non-volatil A. niger pada berbagai konsentrasi. Agen
antifungi volatil dari Penicillium sp. dapat menghambat perkecambahan konidia
patogen sebesar 22,07 %.

Abstract
Rhizosphere moulds have activities to reduce the growth of Fusarium
oxysporum f.sp. lycopersici (Sacc.) W.C. Snyder & H.N. Hans, the causal
pathogen of wilt disease of tomato (Lycopersicon esculentum Mill.) plant.
Moulds were isolated from rhizosphere of tomato plants growing in the Villages
of Cikahuripan and Sukamulya, Sukabumi. Seventeen species that have
antagonistic effect to F. oxysporum f.sp. lycopersici were identified from 47
isolates isolated from rhizosphere of tomato plant and 2 isolates of LIPI MC
collection. Antagonistic mechanism for control the pathogen seemed different
from each species of the rhizosphere moulds. Competition with the pathogen was
produced by Trichoderma sp. and Mucor sp. All isolates of the rhizosphere
moulds produced non-HCN volatile antifungal agent and did not produced
chitinase enzyme. Rhizosphere moulds that produced iturin non-volatile
antifungal agent were Aspergillus fumigatus Fres., Aspergillus niger Van
Tieghem, and 2 isolates of Aspergillus sp. Protease enzyme was produced by
A. fumigatus, Aspergillus sp., Fusarium oxysporum Schlecht, and
Humicola fuscoatra Traaen. Aspergillus niger and Penicillium sp. were
rhizophere moulds that produced non-volatile and volatile antifungal agents
respectively against the pathogen. Both on the suspension of the pathogen conidia
stored in 4° C and unstored in refregerator that given non-volatile antifungal agent
of A. niger (1 : 1) showed the highest percent inhibition of the pathogen conidia
respectively 77.97 % and 76.08 % in observation to-8 hours. Non-volatile
antifungal agent of A. niger at various consentrations increased the germination of
tomato respectively at 4.17 % on tomato that given the filtrate or suspension of
conidia of the patogen at 30 minutes incubation. While in the incubation time of
60 minutes, non-volatile antifungal agent of A. niger at various concentration
increased the germination of tomato at 5.25 %─21.04 % on tomato that given
suspension of conidia of the pathogen and decreased the germination of tomato at
6.38 %─13.04 % on tomato that given the pathogen filtrate. Extending of
incubation time for 30 minutes 4 days delayed the colonization of the pathogen on
tomato that given a mixture of the filtrate or the suspension of the pathogen
conidia and non-volatil antifungal agent of A. niger at various concentrations.
The volatile antifungal agent of Penicillium sp. decreased the germination of
conidia of the patogen at 22.07 %."
2012
T31894
UI - Tesis Open  Universitas Indonesia Library
cover
Setijo Bismo
"Perancangan peralatan fotoreaktor bertingkat dan uji kinerjanya untuk mengolah limbah Cr(VI) dan fenol dilakukan dalam penelitian ini. Seluruh pelat reaktor merupakan bahan stainless steel 316 dengan panjang 30 cm dan lebar 15 cm. Pipa aliran zat cair dipilih dari bahan PVC (merek Rucika) dengan diameter 0,5 inch yang dilengkapi dengan kerangan dari bahan PVC juga. Lampu UV yang digunakan dari jenis black light lamp berjumlah 10 buah @ 10 watt. Reflektor sinar UV yang digunakan merupakan lembaran kertas putih. Fotokatalis yang digunakan adalah TiO2 Degussa P25 berbentuk slurry. Parameter yang diuji meliputi konsistensi katalis, laju sirkulasi, volume awal limbah, dan konsentrasi awal limbah fenol. Hasil penelitian menunjukkan bahwa kondisi optimum yang didapatkan adalah pada konsistensi katalis 0,5 g/L, laju sirkulasi 6 L/menit, dan volume limbah 6 L. Pada kondisi optimum tersebut, reduksi larutan Cr(VI) 40 ppm selama 6 jam operasi pada pH 2 secara simultan mampu menurunkan konsentrasi Cr(VI) sampai 0,45 ppm. Di sisi lain, reduksi Cr(VI) secara terpisah hanya mampu menurunkan konsentrasi Cr(VI) sampai 5,26 ppm. Pada kondi si operasi optimum itu pula, secara simultan larutan fenol 40 ppm dapat disisihkan konsentrasinya sampai 1,9 ppm, selama 8 jam pada pH 2, sedangkan pada degradasi fenol secara terpisah pada pH larutan 7 hanya mampu mendegradasi fenol sampai 5,45 ppm. Konsentrasi fenol dan Cr(VI) yang optimum untuk proses penyisihan ini masing-masing adalah 40 ppm, dimana dapat dicapai penyisihan Cr(VI) sampai sekitar 99,2 %.

The design of photocatalytic cascade reactor and performing its characteristics to treat Cr(VI) and phenol waste in simultaneous way have been realized in this research. The reactor plate was made from stainless steel 316, having size in length and width respectively 30 and 15 cm. The circulating pipe for liquid waste was made from PVC (Rucika) with diameter of 0,5 inch, equipped with PVC globe-valve. It used 10 sets of UV lamp @ 10 watts having type of black light lamp, and UV reflector from white paper sheets. The photocatalyst used is TiO2 Degussa P25 slurry. The process parameters studied in this research consist of catalyst loading, circulation flowrate, initial waste volume, and initial phenol concentration. From this experimental works, it has been shown that the optimum conditions for the cascade reactor are: loading catalyst of 0,5 g/L, circulation rate at 6 L/minute, and 6 L initial waste volume. At these optimum conditions, the Cr(VI) solution might be removed from 40 ppm to 9,45 ppm in 6 hours at pH 2 in simultaneous system, in the other hand, the reduction of Cr(VI) in separ ate system has reached just at 5,26 ppm. Furthermore at these conditions of simultaneous system, the degradation of 40 ppm phenol solution might be attained until 1,9 ppm for 8 hours operation and pH 2, but in separate system, the degradation of phenol just reached until 5,45 ppm at pH 7. In this simultaneously waste treatment system, the optimum concentration of phenol and Cr(VI) are respectively 40 ppm, which the removal of Cr(VI) solution might be as far as 99,2 %."
Depok: Fakultas Teknik Universitas Indonesia, 2008
AJ-Pdf
Artikel Jurnal  Universitas Indonesia Library
cover
Muhammad Firzi
"Sistem pelepasan obat secara terkendali bertujuan untuk mempertahankan konsentrasi obat di dalam darah atau jaringan agar pengobatan optimal. Kesulitan terbesar pengembangan sistem pelepasan obat secara terkendali adalah melakukan formulasi untuk menjaga laju pelepasan obat yang diinginkan secara in vivo. Maka penelitian ini bertujuan untuk mendapatkan model sistem pelepasan obat secara terkendali yang valid yang terdiri dari obat KCl dan mikrosfer chitosan. Model yang dikembangkan berupa model fisikokimia. Data eksperimen selama 100 menit digunakan untuk melakukan validasi terhadap model. Dibutuhkan waktu 8 jam untuk melepaskan hampir seluruh kandungan obat KCl dengan koefisien kelarutan obat adalah 3 x 10-14 ml2/mol2 h, dan koefisien difusi obat KCl di fasa cair sebesar 1,92 x 10-9 cm2/s. Dari eksperimen, komposisi obat yang divalidasi sebesar 20,57% dan 10 %.

Drug is very important for human being. It can help reduce pain and cure diseases. However consumption of drug must follow its existing regulations. The release of a drug can be manipulated through a model of the drug. The main objective of this research is to obtain a valid model of a drug consist of pottasium chloride and chitosan matrix. A valid model can be achieve if the result from experiment and simulation show a slightly difference values. Also, the profile concentration of pottasium chloride in solid, pottasium chloride in liquid and water will be observe and analyze correctly. The result of the research is profile release of pottasium chloride for 100 minutes. The profile release of pottasium chloride shows the percent release of pottasium chloride for 100 minutes. The matrix needs 8 hours to release pottasium chloride, with parameters are: the coefficient of drug dissolution is 3x10-14 ml2/mol2 h, diffusion coefficient of pottasium chloride in liquid is 1,92 x 10-9 m2/s and many other parameters. From the experiment, it was found that the pottasium chloride loading are 20,57% and 10 %."
Depok: Fakultas Teknik Universitas Indonesia, 2013
S44539
UI - Skripsi Membership  Universitas Indonesia Library
cover
Renny Handayani
"Pengobatan penyakit Inflammatory Bowel Disease (IBD) dapat dilakukan dengan penghantaran obat ke kolon.Peradangan kronis memainkan peran penting terjadinya fibrosis.Deksametason merupakan obat yang memiliki efek anti inflamasi dan antifibrosis.Deksametason akan di mikroenkapsulasi ke dalam beads kitosan dengan metode gelasi ionik menggunakan natrium tripolifosfat (NaTPP) sebagai penaut silang. Kemudian Beads kitosan-tpp dilakukan penyalutan menggunakan 10% Eudragit®S100 (Poly (methacylic acid-co-methyl methacrylate) 1:2). Beads yang dihasilkan kemudian dikarakterisasi menggunakan Scanning Electron Microscope(SEM) dan ayakan bertingkat. Uji kandungan obat, efisiensi penjerapan deksametason dalam beads dan pelepasan obat ditetapkan kadar obatnya secara spektrofotometri. Hasil dari uji kandungan obat sebesar 19,39%; 18,55%, 16,25% dan 10,12%. Sedangkan efisiensi penjerapan diperoleh 77,59%; 74,23%; 65,03% dan 40,49%. Pada uji pelepasan obat pada medium HCl pH 1,2 ; dapar fosfat pH 7 dan dapar fosfat pH 6 diperoleh hasil untuk beads yang disalut dengan Eudragit® S100 dimana pelepasan pada kolon sebanyak 78,91 % pada jam ke-24. Sehingga sediaan ini dapat dimungkinkan untuk digunakan sebagai obat target pada kolon dengan pelepasan bertahap.

The treatment of Inflammatory Bowel Disease (IBD) may be carried out by drug delivery to the colon. Chronic inflammation plays an important role occurrence of fibrosis. Dexamethasone is a drug that has anti-inflammatory effects and antifibrosis. Dexamethasone was microencapsulated into chitosan beads by ionic gelation method using sodium tripolyphosphate (TPP) as across-linker. Then chitosan-TPP Beads were coated by 10% Eudragit ®S100(Poly (methacylic acid-co-methyl methacrylate) 1:2). The resulting beads were characterized using Scanning Electron Microscope (SEM) and multilevel sieve. Drug content, encapsulation efficiency of dexamethasone and drug release determined by spectrophotometry UV-Vis. The resultsof the drug content testare19,39%, 18,55%,16,25% and 10,12% while the efficiency of the encapsulation are 77,59%, 74,23%,65,03% and 40,49%. The results of drug release test in medium HCl pH 1.2, phosphate buffer pH 7 and pH 6 found that beads coated with Eudragit® S100 were released in the colon obtained 78,91% occurs at the 24 hours.It is obviously clear that this dosage form can be used as drug targets in the colon with sustained release.
"
Depok: Fakultas Farmasi Universitas Indonesia, 2013
S45058
UI - Skripsi Membership  Universitas Indonesia Library
cover
Sugiharto Yosaputra
"Pembentukan mikrosfer kitosan-sodium tripolifosfat (TPP) dengan metode gelasi ionotropik, parasetamol digunakan sebagai model obat. Mikrosfer obat-kitosan- TPP menunjukkan profil rilis yang bersifat pH independen yang terlihat pada nilai rilis kumulatif pada buffer pH 1,2 dan 7,4. Terdapat fenomena yang berbeda pada rilis mikrosfer di buffer pH 4 yang mengindikasikan terbentuknya konjugasi kitosan-ptalat karena tingginya rilis pada pH tersebut. Mikrosfer yang dibuat dengan larutan TPP pH 8,6 memiliki rilis yang paling tinggi dibandingkan mikrosfer yang dibuat pada pH TPP lainnya. Mikrosfer yang dibuat dengan TPP pH 7 menunjukkan nilai efisiensi enkapsulasi dan loading yang paling baik dibandingkan mikrosfer yang dibuat pada pH TPP lainnya. Hasil penelitian ini mengindikasikan mikrosfer kitosan-TPP dapat menjadi senyawa pelepasan terkendali yang potensial untuk obat.

Ionotropic gelation based Chitosan-Sodium Tripolyphosphate (TPP) microsphere preparation was used as the method in this research, using paracetamol as a model drug. Drug-chitosan-TPP microspheres show pH independent cumulative release properties in release tests using pH 1.2 and 7.4 buffer. Different phenomenon was found in buffer pH 4 release test which indicates that a reaction occurred between chitosan and phthalate ions which formed chitosan-phthalate conjugates for the high release profiles occurred at that pH. Microspheres which are cross-linked in pH 8.6 TPP solution shows the highest release than microspheres which cross- linked in other pH TPP solutions. pH 7 TPP solutions cross-linked microspheres show the highest encapsulation efficiency and loading than other pH TPP solutions cross-linked microspheres. These results indicate that chitosan-TPP microspheres may become a potential delivery system to control the release of drug."
Depok: Fakultas Teknik Universitas Indonesia, 2013
S44042
UI - Skripsi Membership  Universitas Indonesia Library
cover
Lucky Hartati Moehario
"Tujuan Menunjukkan adanya A. anitratus pada isolat klinik (darah) yang berasal dari pasien rawat di rumah sakit di Jakarta selama periode 2002-2008 dan pola sensitivitas mikroorganisme ini terhadap antibiotika. Metode Penelitian ini merupakan penelitian retrospektif dari semua spesimen darah yang masuk ke laboratorium Mikrobiologi Klinik Fakultas Kedokteran Universitas Indonesia (LMK-FKUI) dari tahun 2002-2008. Kultur dan pemeriksaan kepekaan terhadap antibiotik dilakukan berdasarkan praktek standar di LMK-FKUI dan Clinical Laboratory Standard Institute pada tahun yang bersangkutan. Data dikumpulkan dengan menggunakan program WHO-NET 5.4. Semua mikroorganisme Gram negative yang diisolasi dari spesimen darah ditabulasi juga termasuk dengan uji kepekaan A. anitratus terhadap antibiotik. Selain itu juga dilakukan analisis terhadap asal spesimen atau dari institusi mana spesimen tersebut berasal. Hasil A. anitratus merupakan bakteri Gram negatif yang paling banyak diisolasi selama tujuh tahun sejak 2002 sampai 2008 dari spesimen darah, dan selalu ditemukan setiap tahunnya. Hampir 50% bakteri yang diisolasi terdiri dari bakteri tersebut dan Pseudomonas aeruginosa, dan keduanya adalah bakteri lingkungan. Pemeriksaan kepekaan bakteri A. anitratus terhadap antibiotik menunjukkan adanya resistensi terhadap beberapa antibiotik yang diuji. Evaluasi asal spesimen darah menunjukan sebagai berikut: 88 spesimen (74%) berasal dari Rumah Sakit pemerintah, 18 spesimen (15%) dari Rumah Sakit swasta, 3 spesimen (3%) dari pasien praktek dokter dan 10 spesimen (8%) tidak diketahui asalnya. Kesimpulan Ditemukan A.anitratus setiap tahun sejak 2002 sampai 2008 dari spesimen darah dari pasien rawat inap di beberapa Rumah Sakit di Jakarta. Diperlukan penelitian lebih lanjut untuk mencari faktor resiko bakteremia A. anitratus agar dapat mengurangi kemungkinan terjadinya infeksi rumah sakit. Selain itu sangat dianjurkan untuk melanjutkan sampai tahap genotyping untuk menentukan hubungan antara strain yang ada di Rumah Sakit dengan strain yang diisolasi dari pasien.

Abstract
Aim To report the presence of environmental microorganisms, A. anitratus, in blood of hospitalized patients in Jakarta from 2002 to 2008 and their susceptibility to antibiotics. Methods A Retrospective study w as performed on all blood specimens that were received in Clinical Microbiology Laboratory (CML) Faculty of Medicine University of Indonesia during 2002-2008. Culture and antimicrobialsusceptibility examination were carried out according to up to date standard practice in CML and Clinical Laboratory Standard Institute, recpectively. Data was collected by WHONET 5.4 program. All Gram-negative microorganisms that were isolated from blood specimens were tabulated, and so the antibiotics susceptibility of A. anitratus. The origin of the specimens in term of institutions where the specimens came from was also analyzed. Results In a 7 year period up to 2008, A. anitratus was found in blood specimens, and these invironmental bacteria were in fact the most predominant isolated Gram negative microorganisms. Together with another environmental microorganism, Pseudomonas aeruginosa, it composed nearly 50%. Antimicrobial susceptibility test of this microorganism showed some degree of resistance to all tested antibiotics. The origin of those blood specimens which yielded A. anitratus were mainly from government-owned hospitals, that was 88 specimens (74%), followed by private hospitals (18 specimens, 15%), individuals (3 specimens, 3%), and unknown source (10 specimens, 8%). Conclusion Persistent occurrence of A. anitratus in blood specimens of hospitalized patients in hospitals in Jakarta was observed. In the near future, a study to fi nd risk factors for the acquisition of A. anitratus bacteremia is needed to reduce potential hospital associated infection. Moreover, genotyping is advised in order to determine the relationship of hospital and patient derived strains."
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2009
AJ-Pdf
Artikel Jurnal  Universitas Indonesia Library
cover
Muhammad Arif Saadilah
"Material Kitosan dibuat dari cangkang kepiting menggunakan metode kimia dengan demineralisasi HCL 1M selama 1 jam, deproteinasi NaOH 1M selama 2 jam dan variasi deasetilasi NaOH 30%, 40%, 50%, 60%, dan 70% selama 45 menit. Dari analisis FTIR didapat Derajat Deasetilasi kitosan terbaik pada NaOH 50%. Waktu reaksi terbaik untuk mendapatkan Derajat Deasetilasi maksimum dalah 30 menit. Hasil kitosan cangkang kepiting merupakan kitosan murni sesuai dengan database program Match!. Adsorbsi Pb dari larutan Pb(NO3)2 dilakukan pada konsentrasi Pb 10, 50, dan 100 ppm dengan pengadukan selama 30 menit. Dalam suasana asam Kitosan menyerap seluruh Pb untuk konsentrasi 10 ppm dan tidak menyerap Pb pada konsetrasi 50 dan 100 ppm. Sedangkan dalam suasana netral konsentrasi Pb 25 ppm terserap semua, pada konsetrasi 50 ppm terserap 44,77 ppm dan pada konsentrasi Pb 100 ppm terserap 97,04 ppm.

Chitosan has been made from the crab shells with a chemical method with 1M HCl demineralization for 1 hour, deproteination 1M NaOH for 2 hours and variations of deacetylation 30% NaOH, 40%, 50%, 60%, and 70% for 45 minutes. An analytical methode from FTIR showed that the best chitosan deacetylation degree obtained at 50% NaOH, and the best reaction time to get the best Chitosan is 30 minutes. Chitosan product from crab shells is a real chitosan agreed with database Match! program. Chitosan is known best Pb adsorption from Pb(NO3)2 solution with concentrations of 10, 50, and 100 ppm acid delution and neutral dilution of 25, 50, and 100 ppm for 30 minutes and tested variations chitosan residual liquid. Chitosan absorbed around 10 ppm Pb acid dilution and 25 ppm neutral dilution. No adsorption at 50 and 100 ppm Pb in acid dilution. Absorption of 44.77 ppm at 50 ppm and 97.04 ppm to 100 ppm."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2013
S47632
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ade Kusumawardani
"Nannochloropsis sp. berpotensi untuk dijadikan sebagai bahan baku pembuatan biodiesel karena memiliki kandungan lipid yang tinggi. Dibutuhkan proses ekstraksi untuk mendapatkan lipid dari mikroalga. Dalam penelitian ini akan dilakukan ekstraksi dengan metode perkolasi. Tujuan dari penelitian ini adalah untuk membandingkan jenis pelarut, serta menentukan rasio pelarut dengan mikroalga dan waktu perendaman yang optimum dari ekstraksi perkolasi.
Hasil ekstrak kemudian dianalisis komposisi lipidnya dengan menggunakan alat GC-MS dengan detektor untuk mendapatkan jenis asam lemak yang terkandung. Pelarut yang digunakan dalam ekstraksi ini adalah heksana dan kloroform. Secara umum yield akan meningkat seiring dengan kenaikan nilai rasio pelarut dengan mikroalga dan waktu perendaman yang diberikan.
Dari penelitian diperoleh yield tertinggi menggunakan pelarut kloroform sebesar 6,96% pada perbandingan rasio pelarut dengan mikroalga optimum 160:1 (mL solven/g mikroalga) dengan waktu perendaman optimum selama 2 jam. Dari hasil analisis GC-MS terdapat kandungan asam lemak linoleat dengan kadar 66,22%.

Nannochloropsis sp. has potential to be used as raw material for biodiesel because it has a high lipid content. Extraction process required to obtain lipids from microalgae. Extraction used in this research is the method of percolation. The purpose of this study was to compare the type of solvent and determining the ratio of solvent with microalga and the optimum soaking time in producing a high lipid yield.
The lipid composition was analyzed using GC-MS instrument with a detector to obtain types of fatty acids contained. Solvents used in the extraction are hexane and chloroform. Generally yield will increase along with increasing in the value of the ratio of solvent with microalgae and soaking time given.
From the highest yields were obtained using chloroform of 6.96% in comparison with microalgae optimum solvent ratio of 160:1 (mL solvent / g microalgae) with optimum soaking time for 2 hours. From the results of GC-MS analysis contained fatty acids which is linoleic acid with 66,22%.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
S52646
UI - Skripsi Membership  Universitas Indonesia Library
cover
Wanda Ediviani
"Jerami padi merupakan salah satu limbah pertanian yang sangat melimpah di Indonesia. Jerami padi mengandung polisakarida dalam bentuk selulosa dan hemiselulosa, yang dapat dimanfaatkan sebagai bahan baku dalam produksi bioetanol. Penelitian ini bertujuan untuk melihat efektivitas produksi bioetanol dari sampel hidrolisat jerami padi dengan menggunakan ragi roti (ragi kering-Fermipan) dan ragi tapai (ragi padat-Sae).
Penelitian dilakukan dengan memfermentasikan sampel menggunakan kedua jenis ragi tersebut dan isolat murni khamir Saccharomyces cerevisiae sebagai kontrol. Kadar glukosa diukur menggunakan glucometer dan kadar bioetanol dianalisis menggunakan high-performance liquid chromatography. Rancangan penelitian menggunakan Split Plot Design dengan dua faktor perlakuan; pemberian ragi (R) dan waktu fermentasi (T).
Hasil penelitian menunjukkan bahwa kedua jenis ragi pada produksi kadar bioetanol dari sampel memberikan pengaruh yang tidak berbeda nyata; namun perlakuan Sae menghasilkan kadar bioetanol yang lebih tinggi dibandingkan dengan perlakuan Fermipan; laju produksi bioetanol pada perlakuan Sae juga lebih tinggi dibandingkan dengan laju produksi bioetanol pada perlakuan Fermipan. Kesimpulan dari penelitian adalah perlakuan Sae lebih efektif dalam memproduksi bioetanol dari sampel hidrolisat jerami padi.

Rice straw is one of the most abundant agricultural waste in Indonesia. Rice straw contains polysaccharide in the form of cellulose and hemicellulose, which can be used as raw materials in the production of bioethanol. This study aims to examine the effectiveness of bioethanol production from rice straw‘s hydrolyzate using baker's yeast (dry starter - Fermipan) and tapai‘s starter (solid starter - Sae).
Research was carried out by fermenting the sample using two types of starters with a control of pure yeast Saccharomyces cerevisiae. Glucose level was measured by using glucometer and ethanol level was analyzed by using high-performance liquid chromatography. This study using Split Plot Design with two treatment factors; starter‘s inoculum (R) and time of fermentation (T).
The study shows that both types of starters has no significant difference on the bioethanol level production; however, Sae‘s treatment produced higher level of bioethanol compared to the Fermipan‘s; rate of bioethanol production at Sae‘s treatment is also higher than the rate of bioethanol production in Fermipan‘s. The conclusion of the study is Sae is more effective in producing bioethanol from rice straw hydrolyzate samples.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2013
S46160
UI - Skripsi Membership  Universitas Indonesia Library
<<   3 4 5 6 7 8 9 10 11 12   >>