Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 190755 dokumen yang sesuai dengan query
cover
Sofwatul Fida
"Danau Toba merupakan kaldera yang terbentuk dari tiga kali letusan gunung berapi super, hal ini menjadikannya sebagai kaldera tebesar di Asia Tenggara dengan panjang 100 meter, lebar 30 meter, dan tinggi mencapai 505 meter. Danau Toba memiliki potensi geotermal, hal tersebut ditandai dengan munculnya manifestasi di permukaan berupa mata air panas, fumarol dan steaming ground di daerah Simbolon dan Pusuk Buhit. Hal tersebut mengindikasikan bahwa terdapat magmatic body sebagai sumber panas dari sistem geotermal di sekitar Danau Toba. Oleh karena itu penelitian ini bertujuan untuk mengetahui gambaran bawah permukaan Danau Toba sehingga dapat menginterpretasi keberadaan magmatic body dan sistem geotermal. Metode yang digunakan adalah metode gravitasi dan magnetotellurik. Hasil penelitian menunjukkan adanya fitur berupa magma chamber dikedalaman 10-40 km dengan diameter sebesar 30x40 km memiliki nilai densitas sebesar 2.5 gr/cc dan resistivitas >100 ohm.m. Ditemukan juga terdapat lapisan toba tuff hasil erupsi kaldera Toba pada kedalaman 0-1 km dengan nilai densitas 2.21 gr/cc. Serta lapisan basement dengan anomali resistivitas rendah (6-10 ohm.m) dan densitas sebesar 2.61 gr/cc. Selain itu, ditemukan adanya clay cap yang berada di bawah titik MT004 pada kedalaman 1.5 km dengan nilai resistivitas rendah (10-20 Ohm.m). Hasil integrasi menunjukkan bahwa magmatic body di bawah Danau Toba berperan sebagai sumber utama dari sistem geotermal yang berada di sekitar Danau Toba. Terdapat aliran uap panas yang mengalir dari magmatic body menuju kedalaman dangkal hingga pada kedalaman sekitar 3 km di bawah titik MT-004 yang merupakan proyeksi dari daerah Pusuk Buhit dan Simbolon. Aliran uap panas ini mengalami penurunan suhu sehingga mendingin dan memadat membentuk plutonik body. Plutonik body inilah yang diduga berperan sebagai heat source dari sistem geotermal di daerah Pusuk Buhit dan Simbolon. Hal tersebut diperkuat dengan data penunjang geokimia berupa plot diagram trilinear SO4-HCO3-Cl yang menampilkan bahwa fluida air panas di Pusuk Buhit dan Simbolon sama-sama terletak pada sudut sulfat yaitu steam heated waters dimana tipe fluida yang terbentuk akibat pemanasan air tanah oleh uap geotermal bukan volcanic waters (pemanasan air tanah oleh magma).

Lake Toba is a caldera formed from three times a super volcanic eruption, this makes it as the largest caldera in Southeast Asia with a length of 100 meters, 30 meters wide, and height reaches 505 meters. Lake Toba has geothermal potential, it is characterized by the presence of manifestations on the surface such as hot springs, fumarol and steaming ground in the Simbolon and Pusuk Buhit area. This indicates that there is a magmatic body as a heat source of a geothermal system around Lake Toba. Therefore this study aims to find out the surface of Lake Toba so that it can interpret the existence of magmatic body and geothermal systems. The method used is the gravity and magnetotellurics method. The results showed a feature in the form of magma chamber in the time of 10-40 km with a diameter of 30x40 km has a density value of 2.5 gr/cc and resistivity >100 ohm.m. There was also a Toba tuff layer the result of the Toba caldera eruption at a depth of 0-1 km with a density value of 2.21 gr/cc. And the basement layer with low resistivity anomalies (6-10 ohm.m) and a density of 2.61 gr/cc. In addition, there was a clay cap which was below the MT004 point at a depth of 1.5 km with a low resistivity value (10-20 ohm.m). Integration results show that the magmatic body under Lake Toba acts as the main source of the geothermal system around Lake Toba. There is a hot vapor flow that flows from Magmatic Body towards a shallow depth to a depth of about 3 km below the MT-004 point which is a projection of the Pusuk Buhit and Simbolon area. This hot vapor stream had temperature decrease, then it cools and covers forming a body plutonic. This Putonik body is suspected of playing a role as a heat source of the geothermal system in the Pusuk Buhit and Simbolon areas. This is reinforced by geochemical supporting data in the form of a SO4-HCO3-CL trilinear diagram plot that displays that hot water fluids in the hull of Buhit and Simbolon are equally lies in the sulfate angle, namely steam heated waters where the type of fluid is formed due to soil water heating by geothermal steam not a volcanic waters (groundwater heating by magma)."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Bimo Ramadhan
"Indonesia merupakan negara dengan potensi energi geotermal yang besar. Salah satu wilayah di Indonesia dengan potensi energi geotermal adalah Wilayah Z. Sebelumnya, beberapa penelitian dalam bidang geosains mengenai Wilayah Z telah dilakukan untuk mengetahui struktur geologi, keberadaan manifestasi geotermal, geokimia fluida hidrotermal, resistivitas batuan, dan anomali gravitasi. Metode geofisika yang digunakan dalam penelitian ini adalah metode geofisika gravitasi dengan data yang diperoleh dari GGMPlus 2013. Anomali gravitasi regional dan residual diperoleh menggunakan dua metode, yaitu bandpass dan polynomial trend surface analysis. Analisis FHD dan SVD digunakan dalam menentukan keberadaan patahan. Terdapat sepuluh patahan yang teridentifikasi melalui analisis tersebut dengan rincian delapan patahan normal dan dua patahan naik. Model 2-D dan 3-D digunakan dalam memperkiraan nilai densitas batuan bawah permukaan. Densitas batuan tertinggi berada pada luar pull-apart basin dan densitas batuan terendah berada pada bagian tengah pull-apart basin. Berdasarkan analisis data gravitasi GGMPlus 2013 beserta data-data pendukung seperti data geologi, data geokimia, dan data geofisika, teridentifikasi beberapa struktur patahan yang sesuai dengan persebaran struktur patahan pada peta geologi.

Indonesia is a country with great geothermal energy potential. One of the regions in the country with geothermal energy potential is Region Z. Previously, several studies in the field of geosciences regarding Region Z have been carried out to determine the geological structure, the presence of geothermal manifestations, the geochemistry of hydrothermal fluids, rock resistivity, and gravitational anomalies. The geophysical method used in this study is the gravitational geophysical method with data obtained from GGMPlus 2013. Regional and residual gravity anomalies are obtained using two methods, namely bandpass and polynomial trend surface analysis. FHD and SVD analysis are used in determining the presence of faults. There were ten faults identified through the analysis with details of eight normal faults and two ascending faults. 2-D and 3-D models are used in estimating the density values of subsurface rocks. The highest rock density is outside the pull-apart basin and the lowest rock density is in the central pull-apart basin. Based on the analysis of GGMPlus 2013 gravity data along with supporting data such as geological data, geochemical data, and geophysical data, several fault structures that correspond to the distribution of fault structures on the geological map were identified."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Alif Fadhli Anshari
"Wilayah Cisolok-Cisukarame merupakan area prospek geotermal liquid dominated geothermal system yang berlokasi di Kabupaten Sukabumi, Provinsi Jawa Barat, Indonesia. Aktivitas geotermalnya dicirikan dengan kemunculan manifestasi permukaan dalam bentuk mata air panas di sepanjang sungai Cisolok dan Cisukarame. Eksplorasi geotermal pertama di wilayah Cisolok-Cisukarame telah dilakukan sejak tahun 1970 dan sumur eksplorasi pertama dilakukan pada akhir 1986 di dekat mata air panas Cisolok hingga kedalaman 1200 meter dan mendapati temperatur di dasar sumur sebesar 120o C. Beberapa penelitian serupa telah dilakukan sebelumnya, namun model konseptual dari penelitian terdahulu belum secara akurat dapat menduga lokasi keberadaan reservoir dan heat source dikarenakan keterbatasan data sehingga interpretasi yang dilakukan belum tepat. Dalam penelitian ini, rekonstruksi model konseptual geotermal dilakukan untuk memecahkan permasalahan utama dalam menentukan keberadaan reservoir dan heat source, berbasis integrasi data geologi, geokimia, gravitasi satelit GGMPlus, dan magnetotellurik. Berdasarkan hasil interpretasi model konseptual yang telah direkonstruksi, keberadaan reservoir pada sistem geotermal Cisolok-Cisukarame diduga berada dibawah manifestasi permukaan Cisukarame yang berperan sebagai zona upflownya dan mengalami perluasan ke arah timur laut. Temperatur pada reservoir mencapai 235o C dengan sumber panas yang diduga berasal dari sisa panas Gunung Halimun berumur kuarter. Area prospek berdasarkan pertimbangan pola persebaran resistivitas serta batas reservoir diperkirakan memiliki luas sebesar 15 km2 dengan top of reservoir pada kedalaman 500 - 1000 meter. Lokasi titik pemboran sumur eksplorasi direkomendasikan berada pada zona permeable timur laut manifestasi Cisukarame mencapai kedalaman 1000 meter pada zona dengan temperature yang tinggi. Diperkirakan area prospek reservoir masih mengalami perluasan ke arah utara dan timur laut, namun diperlukan survei geofisika lanjut untuk mengonfirmasi kemungkinan possible extend tersebut.

The Cisolok-Cisukarame region is a liquid dominated geothermal system prospect area located in Sukabumi Regency, West Java Province, Indonesia. Its geothermal activity is characterized by the appearance of surface manifestations in the form of hot springs along the Cisolok and Cisukarame rivers. The first geothermal exploration in the Cisolok-Cisukarame area has been carried out since 1970 and the first exploration well was carried out at the end of 1986 near the Cisolok hot spring to a depth of 1200 meters and found the temperature at the bottom of the well of 120o C. Several similar studies have been carried out before, but the model conceptual studies from previous studies have not been able to accurately predict the location of the reservoir and heat source due to limited data so that the interpretation is not correct. In this research, the reconstruction of the conceptual geothermal model is carried out to solve the main problems in determining the existence of reservoirs and heat sources, based on the integration of geological, geochemical, gravity satellite GGMPlus, and magnetotelluric data. Based on the interpretation of the reconstructed conceptual model, the reservoir in the Cisolok- Cisukarame geothermal system is predicted below the surface manifestation of Cisukarame which acts as the upflow zone and is expanding to the northeast. The temperature in the reservoir reaches 235o C with the heat source predicted to come from the residual heat of Mount Halimun with quarter age. The prospect area based on consideration of the resistivity distribution pattern and reservoir boundary is estimated to have an area of 15 km2 with a top of reservoir at a depth of 500 - 1000 meters. The location of the exploration well drilling point is recommended to be in the northeastern permeable zone of the Cisukarame manifestation reaching a depth of 1000 meters in a zone with high temperatures. It is estimated that the reservoir prospect area is still expanding to the north and northeast, but further geophysical surveys are needed to confirm the possibility of this possible extend."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Afifah Sekar Arifianti
"Daerah “CB’ merupakan salah satu daerah prospek geotermal di Indonesia. Indikasi adanya potensi sistem geotermal daerah “CB” ditandai dengan kemunculan manifestasi permukaan berupa kelompok mata air panas yang bertemperatur 68 – 74.8oC dengan pH antara 6.35 – 68.4. Penelitian ini bertujuan untuk membangun model konseptual terintegrasi dari data magnetotellurik, gravitasi satelit GGMPlus, geologi, dan geokimia. Hasil dari pemodelan inversi 3-D magnetotellurik menunjukkan adanya sebaran clay cap dengan variasi ketebalan 1 - 2 km, yang ditandai dengan nilai resistivitas 1 – 15 Ωm. Lapisan reservoir diduga mempunyai resistivitas 20 – 60 Ωm dengan puncak reservoir yang berada pada kedalaman ≤ 1000 meter di bawah permukaan. Berdasarkan perhitungan dengan menggunakan geotermometer Na/K Giggenbach, rata-rata temperatur reservoir relatif cukup tinggi yaitu sekitar 220 - 250 ºC. Sumber panas pada sistem geotermal “CB” ini diperkirakan berasal dari plutonik body yang berasosiasi dengan aktivitas sesar. Dalam penelitian ini juga diperoleh indikasi adanya struktur graben berarah barat laut - tenggara dan beberapa struktur patahan lainnya berdasarkan hasil analisis turunan berupa First Horizontal Derivative (FHD) dan Second Vertical Derivative (SVD) dari gravitasi satelit GGMPlus. Sistem geotermal “CB” ini diduga termasuk ke dalam klasifikasi fault-controlled geothermal system.reynor Ratio, and Jensen's Alpha with CAPM based on data collected from refinitv, eikon, IDX, Yahoo Finance for the period 2016 – 2021. The results show that in the period of crisis SSRI outperforms ISSI and SRI Kehati and in general SSRI could compete with ISSI and SRI Kehati. These results indicate that incorporating ESG screening into sharia investment decisions does not have a negative impact on returns and risks, so that it can be used as an option for portfolio diversification. In addition SSRI will increase the impact and positive contribution to reducing the financing gap for SDGs, as well as gain a wider investor base.

Daerah “CB’ merupakan salah satu daerah prospek geotermal di Indonesia. Indikasi adanya potensi sistem geotermal daerah “CB” ditandai dengan kemunculan manifestasi permukaan berupa kelompok mata air panas yang bertemperatur 68 – 74.8oC dengan pH antara 6.35 – 68.4. Penelitian ini bertujuan untuk membangun model konseptual terintegrasi dari data magnetotellurik, gravitasi satelit GGMPlus, geologi, dan geokimia. Hasil dari pemodelan inversi 3-D magnetotellurik menunjukkan adanya sebaran clay cap dengan variasi ketebalan 1 - 2 km, yang ditandai dengan nilai resistivitas 1 – 15 Ωm. Lapisan reservoir diduga mempunyai resistivitas 20 – 60 Ωm dengan puncak reservoir yang berada pada kedalaman ≤ 1000 meter di bawah permukaan. Berdasarkan perhitungan dengan menggunakan geotermometer Na/K Giggenbach, rata-rata temperatur reservoir relatif cukup tinggi yaitu sekitar 220 - 250 ºC. Sumber panas pada sistem geotermal “CB” ini diperkirakan berasal dari plutonik body yang berasosiasi dengan aktivitas sesar. Dalam penelitian ini juga diperoleh indikasi adanya struktur graben berarah barat laut - tenggara dan beberapa struktur patahan lainnya berdasarkan hasil analisis turunan berupa First Horizontal Derivative (FHD) dan Second Vertical Derivative (SVD) dari gravitasi satelit GGMPlus. Sistem geotermal “CB” ini diduga termasuk ke dalam klasifikasi fault-controlled geothermal system."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Sherina
"Indonesia merupakan salah satu negara dengan sumber daya geotermal terbesar di dunia. Meskipun demikian, masih banyak daerah berpotensi lain yang belum diteliti lebih lanjut, salah satunya adalah daerah Gunung Pancar. Selain itu, akhir-akhir ini, data gravitasi satelit GGMplus juga sering kali menjadi pilihan bagi para peneliti untuk digunakan dalam survei pendahuluan. Oleh karena itu, pada penelitian ini, akan dilakukan komparasi antara data gravitasi satelit GGMplus dan data gravitasi lapangan dalam mengidentifikasi struktur dan keadaan bawah permukaan di daerah geotermal Gunung Pancar. Penelitian ini bertujuan untuk menentukan data gravitasi mana yang lebih konsisten dengan informasi geologi dan penginderaan jauh. Proses pengolahan data terdiri atas pengoreksian data gravitasi, pemisahan CBA (Complete Bouguer Anomaly), pembuatan peta FHD (First Horizontal Derivative) dan SVD (Second Vertical Derivative), analisis patahan, hingga pemodelan inversi 3D dan pemodelan ke depan 2D sebagai pelengkap. Adapun hasil komparasi menunjukkan bahwa CBA dan anomali residual yang dihasilkan oleh kedua data gravitasi sama-sama menampilkan anomali rendah tepat di tubuh gunung. Anomali rendah tersebut diduga berasosiasi dengan kehadiran sistem geotermal Gunung Pancar. Sementara itu, anomali regional dari data gravitasi lapangan menunjukkan hasil yang lebih sesuai dengan informasi geologi dibandingkan data gravitasi satelit GGMplus. Kemudian, data gravitasi lapangan juga berhasil mengidentifikasi dugaan patahan secara lebih detail (sebanyak dua belas dugaan patahan telah teridentifikasi). Selanjutnya, kedua data gravitasi menghasilkan model inversi 3D yang berkorelasi baik dengan penampang AMT (Audio-Frequency Magnetotelluric) hasil penelitian oleh Daud, et al. pada tahun 2017. Terakhir, setelah dilakukan komparasi, dilakukan integrasi dengan data pendukung untuk menghasilkan model konseptual hasil rekonstruksi yang memberikan informasi komprehensif terkait sistem geotermal di daerah penelitian.esimpulannya, data gravitasi lapangan bersifat lebih detail dan representatif dibandingkan data gravitasi satelit GGMplus dalam menggambarkan struktur dan keadaan bawah permukaan di daerah geotermal Gunung Pancar.

Indonesia is one of the countries that has the largest geothermal resources in the world. However, there are still many other potential areas that have not been thoroughly investigated, one of which is the Mount Pancar area. In addition, GGMplus satellite gravity data has recently been used many times by the researchers as part of a preliminary survey. Therefore, in this study, a comparison will be conducted between GGMplus satellite gravity data and field gravity data in identifying subsurface conditions and geological structures in the geothermal area of Mount Pancar. The aim of the comparative study is to determine which gravity data is more consistent with geological and remote sensing information. The data processing consists of gravity data correction, CBA (Complete Bouguer Anomaly) separation, making FHD (First Horizontal Derivative) and SVD (Second Vertical Derivative) maps, fault analysis, 3D inversion modeling, and 2D forward modeling as a complement. The comparison results show that the CBAs and residual anomalies of two-gravity data both depict an appearance of a low anomaly right in the mount’s body. The low anomaly is predicted to be associated with the presence of the Mount Pancar geothermal system. Meanwhile, regional anomalies from field gravity data show results that are more in line with geological information than those from GGMplus satellite gravity data. Then, field gravity data also successfully detected the possible faults in more detail (a total of twelve possible faults have been identified). Furthermore, the two-gravity data generate some 3D inversion models that have a good correlation with the AMT (Audio-Frequency Magnetotelluric) cross sections which was made by Daud, et al. in 2017. Last, after the comparison, integration with supporting data is also carried out to reconstruct a conceptual model that provides comprehensive information related to the geothermal system in the research area. In conclusion, field gravity data is more detailed and representative than GGMplus satellite gravity data in describing the subsurface conditions and geological structures in the geothermal area of Mount Pancar."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Khairunnisa
"Daerah penelitian “KN” merupakan salah satu daerah prospek geotermal yang menjadi fokus pengembangan dari kawasan Flores untuk menggunakan semua potensi geotermal untuk pembangkit listrik yang diindikasi dengan kemunculan manifestasi fumarol dan mata air panas. Penelitian ini bertujuan untuk mengetahui gambaran mengenai kondisi bawah permukaan daerah geotermal dalam bentuk model konseptual yang sistematik berbasis analisis terintegrasi data magnetotellurik, data gravitasi GGMplus, data citra satelit serta data penunjang geologi dan geokimia daerah penelitian. Selain model konseptual sistematik, harapan dari penelitian ini adalah untuk dapat merekomendasikan area yang tepat untuk pemboran selanjutnya dan penentuan daerah prospek. Berdasarkan data penunjang geokimia, temperatur reservoir diduga sekitar 220°C melalui perhitungan geothermometer. Berdasarkan data geologi, pada sistem geotermal lapangan “KN” memiliki batuan yang berpotensi untuk menjadi clay cap adalah batuan-batuan vulkanik yang teralterasi di sekitar hot spring. Batuan yang bertindak sebagai cap rock adalah batuan clay tipe argilik. Batuan dasar (basement) berhubungan dengan sedimen laut. Berdasarkan hasil pengolahan data citra satelit, dapat diidentifikasi mengenai zona Fault and Fracture Density pada daerah penelitian yang menunjukkan zona FFD sedang hingga tinggi sehingga dapat dikategorikan sebagai zona permeable. Hasil pengolahan data gravitasi berdasarkan analisis FHD dan SVD dapat diindentifikasi adanya 13 indikasi patahan dan menunjukkan patahan yang sesuai dengan struktur di dalam peta geologi, nilai anomali gravitasi yang dapat diinterpretasikan untuk dugaan area prospek serta distribusi densitas parasnis yang sesuai dengan data litologi daerah penelitian yang didominasi oleh batuan vulkanik andesit. Hasil pengolahan data magnetotellurik dapat menggambarkan sebaran resistivitas bawah permukaan yang berasosiasi dengan system geotermal daerah penelitian berupa clay cap, reservoir, dan heat source. Hasil MT tersebut juga dapat mengindikasikan pola updome dan dikonfirmasi oleh keberadaan manifestasi fumarol FWO-01 dan 02 dan mata air panas APWO yang bersifat sulfat steam heated water yang menjadi karakteristik zona upflow. Analisis integrasi hasil korelasi dari data-data tersebut, kemudian dipadukan untuk merekonstruksi model konseptual daerah geotermal “KN”. Area prospek geotermal berada pada zona upflow dekat manifestasi fumarole FWO-01 dan 02 serta mata air panas APWO dengan luas sekitar 2.75 km. Rekomendasi titik pemboran sumur eksplorasi berada di arah timur dari manifestasi APWO dengan titik pemboran berada pada elevasi 750 meter hingga - 1000 meter dengan arah directional drilling menuju barat daya sehingga dapat memotong sesar di dekat manifestasi APWO.

The research area "KN" is one of the geothermal prospect areas in Eastern Indonesia, which is the focus of development in meeting electricity needs. This study aims to describe the subsurface conditions of the geothermal area in the form of a conceptual model based on an integrated analysis of magnetotelluric data, GGMplus gravity data, satellite imagery data, and geological and geochemical supporting data to recommend areas for further drilling and determination of prospect areas. Based on the results of processing satellite image data, the Fault and Fracture Density zone can be identified, which shows a moderate to high zone so that it can be categorized as permeable. The results of processing gravity data based on the analysis of First Horizontal Derivatives and Second Vertical Derivatives can identify the presence of 13 associated fault indications, and the value of gravitational anomalies can be interpreted for the estimation of the prospect area. The results of magnetotelluric data processing can describe the distribution of subsurface resistivity associated with geothermal systems in the form of clay caps, reservoirs, and heat sources. The magnetotelluric results can also indicate an updome pattern confirmed by manifestations of FWO-01 and 02 fumaroles and APWO hot springs, which are sulfate steam heated water characteristic of the upflow zone. The geothermal prospect area is in the upflow zone with an area of ​​about 2.75 km². The recommended drilling point is to the east of the APWO with the drilling point at an elevation of 750 meters to -1000 meters with directional drilling to the southwest so that it can cut faults near APWO."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Riri Oktobiyanti
"Lapangan geothermal Sibayak terletak di kawasan utara Great Sumatra Fault Zone (GSFZ) yang memiliki topografi yang tinggi di dalam kaldera Singkut. Ditinjau dari kondisi geologinya, lapangan ini memiliki prospek geothermal yang ditandai dengan keberadaan manifestasi panas berupa solfatara, fumarole, chloride springs dan silica sinters. Untuk menginvestigasi struktur bawah permukaan secara lebih detail, maka dilakukan reinterpretasi data magnetotellurik dan gravitasi. Dari pemodelan 2-Dimensi MT yang menggunakan software MT2Dinv dan 3-Dimensi MT menggunakan software GeoSlicer-X maka dapat diketahui clay cap mempunyai nilai resistivitas 5-10 Ωm. Zona reservoir diindikasikan dengan harga resistivitas 50- 200 Ωm yang terdapat di bawah zona clay cap dan berada pada kedalaman sekitar 1600m. Pusat reservoir terdapat pada daerah yang meliputi Gunung Sibayak dan Gunung Pratektekan dengan luas yang diperkirakan sekitar 4 km². Pemodelan data gravitasi mendukung gambaran stuktur utama yang berupa kaldera Singkut dan sesarsesar yang berarah barat laut-tenggara. Berdasarkan studi ini dapat direkomendasikan sumur produksi diarahkan pada pusat reservoir, sedangkan reinjeksi ditempatkan di daerah dekat reservoir tetapi yang diduga memiliki hubungan permeabilitas, yaitu di sekitar batas kaldera sebelah selatan.

Sibayak geothermal field is situated in the northern Great Sumatra Fault Zone (GSFZ), which has high topography inside Singkut caldera. From the geological point of view, Sibayak field is a potential geothermal area supported by the occurrence of surface manifestations such as solfataras, fumaroles, chloride springs and silica sinters. To investigate subsurface geological structure, reinterpretation of the Magnetotelluric and gravity data were carried out. Two-dimensional modeling of MT data using MT2Dinv software and 3-D visualization of the MT data using GeoSlicer-X have delineated clay cap with resistivity of 5-10 ohm. Reservoir zone is indicated by slightly higher resistivity (50 - 200 ohm-m) below the clay cap located in the depth of about 1600m. Center of reservoir is probably located in the area between Mt Sibayak and Mt Pratektekan covering about 4 km². The gravity data modeling supports the existence of main structures, those are Singkut caldera and faults zone oriented in the northwest - southeast direction. Based on this study, it is recommended that the production wells shoud be located to the central of reservoir and reinjection wells should be sited to the area close to the main reservoir which has permeability connection, that is in the southern caldera boundary."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2009
S29441
UI - Skripsi Open  Universitas Indonesia Library
cover
Indra Kurniawan
"Lapangan geotermal “x” merupakan salah satu lapangan geotermal di Indonesia yang sedang dalam proses pengembangan. Tahap eksplorasi merupakan tahapan yang paling mempunyai resiko yang besar. Untuk mengurangi resiko tersebut, diperlukan data – data yang saling terintegrasi untuk menggambarkan sistem geotermal bawah permukaan secara representatif. Data magnetotellurik dan gravitasi merupakan data utama dalam pembuatan model konseptual sistem geotermal lapangan “x”. Selain itu juga didukung dengan data geokimia dan data sumur landaian suhu. Dari metode magnetotellurik yaitu berupa analisis fasa tensor dan induction arrow didapatkan arah struktur utama atau bisa disebut dengan geoelectrical strike yaitu berarah Timurlaut – Baratdaya atau lebih tepatnya mempunyai arah N80oE. Hal ini juga diperkuat dari metode gravitasi berupa analisis derivatif dan data geologi regional dimana struktur yang teridentifikasi juga dominan berarah Timurlaut – Baratdaya. Dari hasil pengolahan data gravitasi berupa data complete bouger anomaly mempunyai nilai 53 – 82 mgal dimana daerah yang mempunyai anomali tinggi berada pada daerah sekitar manifestasi hingga ke Timur daerah penelitian. Hasil pemodelan inversi 3D dari data magnetotellurik didapatkan batuan claycap mempunyai ketebalan berkisar antara 400 – 500 m. Batuan yang berperan sebagai heatsource merupakan batuan intrusi yang mempunyai nilai resistivitas hingga mencapai 400 ohm-m. Dari analisis data geokimia menunjukkan daerah outflow pada sistem geotermal yaitu daerah dimana terdapatnya manifestasi yang muncul ke permukaan. Dari semua data tersebut dapat diintegrasikan menjadi model konseptual sistem geotermal dimana dapat digunakan sebagai acuan dalam melakukan pemboran geotermal.

The geothermal field "x" is one of the geothermal fields in Indonesia which is in the process of being developed. The exploration stage is the stage that has the greatest risk. To reduce this risk, integrated data is needed to describe the subsurface geothermal system in a representative manner. Magnetotelluric and gravity data are the main data in making a conceptual model of the field "x" geothermal system. Also besides supported by geochemical data and temperature sloping well data. From the magnetotelluric method, namely in the form of phase tensor analysis and induction arrow, the direction of the main structure is obtained or it can be called a geoelectrical strike, which is in the Northeast - Southwest direction or more precisely has a direction of N80oE. This is also reinforced by the gravity method in the form of derivative analysis and regional geological data where the identified structures are also predominantly northeast-southwest trending. From the results of processing gravity data in the form of complete bouge anomaly data has a value of 53 - 82 mgal where areas that have high anomalies are in the area around the manifestation to the east of the study area. The results of 3D inversion modeling from the magnetotelluric data show that clay cap rocks have a thickness ranging from 400 - 500 m. Rocks that act as heat sources are intrusive rocks that have a resistivity value of up to 400 ohm-m. The geochemical data analysis shows the outflow area in the geothermal system, namely the area where there are manifestations that appear to the surface. From all these data, it can be integrated into a conceptual model of the geothermal system which can be used as a reference in carrying out geothermal drilling."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Syafrima Wahyu
"Telah dilakukan penelitian guna delineasi zona prospek sistem panasbumi daerah ldquo;Z rdquo; menggunakan permodelan tiga Dimensi magnrtotellurik didukung data terpadu berupa geologi dan geokimia serta terintegrasi data gravitasi. Daerah panasbumi ldquo;Z rdquo; dalam tatanan tektoniknya termasuk pada jalur backarc Sumatera, tepat pada salah satu segmen sesar Sumatera bagian selatan, disusun oleh batuan vulkanik dan sedimen klastik yang berumur Tersier hingga Kuarter Andesit-Basalt . Gejala adanya sistem panasbumi pada daerah penelitian ditandai dengan kemunculan manifestasi permukaan berupa alterasi dan lima mata air panas bersuhu 44,4 - 92,5 oC, pH 8,19 - 9,43 dan bertipe bikarbonat, sulfat-bikarbonat, serta sulfat-klorida. Pembentukan sistem panasbumi dipengaruhi oleh aktivitas tektonik menyerong oblique antara lempeng Samudera India dan Lempeng Kontinen Eurasia searah dengan pola sesar Sumatera.
Berdasarkan analisis air panasbumi temperatur reservoir diambil melalui perhitungan geothermomether SiO2 Fournier 1977 , Na-K Giggenbach 1988 , Na-K-Ca, diagram Na-K-Mg serta diagram Enthalphy - Cloride Mixing Model berkisar 145 - 155oC, termasuk dalam sistem panas bumi bertemperatur sedang. Berdasarkan inversi tiga dimensi data MT didapatkan kedalaman Top of Reservoar TOR sistem panasbumi daerah ldquo;Z rdquo; sekitar 400 m elevasi 50 mdpl sedangkan berdasarkan forward modeling data gravitasi lintasan 2 dimensi diperkirakan sumber panas berupa cooling instrusion diperkirakan batuan gabro ; resistivitas ge; 450 ?m ; densitas 2,95 - 3,15 gr/cc dan reservoar berupa batupasir resistivitas 50 - 250 ?m ; densitas 2,60 gr/cc . Sistem panasbumi daerah penelitian termasuk jenis tektonik fracture zone dengan temperatur sedang dengan luas daerah prospek sekitar 7,5 km2.

A study for delineating geothermal system of prospect area ldquo Z rdquo has been done by using tree dimension modeling of magnetotelluric supported unified data just like geological and goechemical and integrated gravity data. Geothermal area ldquo Z rdquo in tectonic setting included in Sumatra volcanic backarc, right on one of the southern part of Sumatra fault segment. Compodes by volcanic and clastic sendimentary rock are Tertiary to Quarternary Andesite Basalt. The existance of goethermal system in this area is indicated by the presence of thermal manifestation in form of alteration and five hot springs temperature in the ranges 44.4 ndash 92.5 oC, and pH 8.19 ndash 9.43 and type of fluida are bicarbonate, sulphate bicarbonate, and sulfate chloride. The development of geothermal system is affected by tectonic oblique between the Indian Ocean plate and the Eurasian Contenent Plate direction of the Sumatra fault patterns.
Based on the analysis of geothermal water reservoir temperature are taken through the calculation geothermometer SiO2 Fournier 1977, Na K Giggenbach 1988 , Na K Ca, Na K Mg diagram and Enthalpi Mixing Cloride Model range 145 ndash 155 oC, classified as intermediate temperature. Base on a three dimensional inversion of the magnetotelluric data obtained depth Top of Reservoir TOR geothermal system area ldquo Z rdquo about 400 m elevation 50 meters above sea leavel , while based on the two dimensional of the gravity data predicted heat sources such as cooling instrusion estimated gabbro density 2,95 ndash 3,15 gr cc and reservoar such as sandstone resistivity 50 ndash 250 m density 2,60 gr cc . The Geothermal systems of research area classified as the type of intermediate temperature tectonic fracture zone with prospect area about 7,5 km2.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
T46881
UI - Tesis Membership  Universitas Indonesia Library
cover
Wambra Aswo Nuqramdha
"Tahapan eksplorasi masih menyimpan tantangan terbesar dan memiliki resiko yang tinggi bagi para pelaku industri bidang geothermal. Oleh karena itu, diperlukan pemahaman yang baik mengenai kondisi bawah-permukaan dengan mengintegrasikan data geosains yang memiliki kualitas yang bagus. Target utama dari eksplorasi yaitu penentuan lokasi pemboran dengan tingkat kepastian yang lebih tinggi. Pemboran diarahkan pada area yang memiliki temperatur dan permeabilitas yang tinggi. Distribusi temperatur bawah permukaan dapat didekati dari nilai resistivitas yang diperoleh dari data MT. Sementara zona dengan permeabilitas yang tinggi, berasosiasi dengan struktur geologi. Pemetaan geologi hanya dapat menggambarkan struktur geologi di permukaan, sementara kemenerusannya di bawah-permukaan menjadi kesulitan tersendiri untuk dideteksi. Penelitian ini difokuskan pada identifikasi struktur geologi bawah-permukaan menggunakan data Magnetotellurik (MT) dan Gravitasi. Analisis pola spliting kurva, arah elongasi polar diagram, serta pencitraan struktur di bawah-permukaan dengan melihat hasil inversi 3-dimensi, yang diperoleh dari data MT, serta didukung oleh hasil pemodelan data Gravitasi, merupakan metodologi yang digunakan dalam penelitian ini. Data geologi dan geokimia, dilibatkan sebagai data pendukung untuk membuat analisis keberadaan struktur geologi bawah-permukaan ini menjadi lebih komprehensif. Tahap akhir dari penelitian ini adalah memberikan rekomendasi dalam menentukan lokasi pemboran, dengan sebelumnya membuat model konseptual dan mendelineasi daerah prospek. Hasil analisis struktur, model konseptual, dan delineasi daerah prospek, menghasilkan rekomendasi tiga buah sumur eksplorasi. Dua sumur mengarah pada upflow di Gunung ?X?, dan satu sumur mengarah pada upflow di scoria cone.

Exploration stage still holds the biggest challenges and have a high risk for the geothermal industry. Therefore, required a good understanding of subsurface conditions by integrating the geoscientific data that has a high quality. The main target of exploration is the determination of drilling trajectory. The subsurface drilling target is actually directed to high temperature and high permeability zone. Subsurface temperature distribution can be approximated from the resistivity values obtained from the data MT. While the zones with high permeability, associated with geological structures. Geological mapping could only figure out geological structures indicated at the surface. However, continuation of the geological structure into the subsurface is difficult to detect. This study focused on the identification of subsurface geological structure using Magnetotelluric (MT) and gravity data. Splitting pattern analysis from MT curve, the elongation of orientation of polar diagrams, as well as imaging of subsurface structures by looking at the results of 3-dimensional inversion, the data obtained from MT, and supported by the results of Gravity data modeling, a methodology used in this study. Geological and geochemical data, were included as supporting data to make the analysis of the presence of subsurface geological structure has become more comprehensive. And the final stage of this research is to provide recommendations in determining the location of drilling, by first making a conceptual model of the geothermal system and delineating the prospect area. The result of structure analysis, conceptual model, and prospect delineation, provide three exploration wells for recommendation. The first two will be directed to upflow at Mount ?X?, and the other one to upflow at scoria cone."
Jakarta: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2014
T43414
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>