Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 189439 dokumen yang sesuai dengan query
cover
Angelina Grace
"Pemanfaatan limbah menjadi alat yang bernilai guna sangat penting bagi lingkungan. Limbah tempurung kelapa dapat diolah sebagai sumber karbon untuk kemudian disintesis menjadi bahan aktif untuk aplikasi elektroda superkapasitor. Tujuan dari penelitian ini untuk mengetahui pengaruh kondisi impregnasi logam, suhu pirolisis, dan suhu aktivasi tempurung kelapa terhadap kinerja superkapasitor. Elektroda superkapasitor dirangkai dengan elektrolit berupa KOH 3 M, binder berupa PVA dengan campuran asam sitrat sebagai crosslinking agent, dan separator berupa kertas saring. Hasil penelitian terbaik berdasarkan uji Cyclic Voltammetry diperoleh sampel Ni10-P550-A700. Hal ini menunjukkan bahwa suhu pirolisis (550oC) dan aktivasi tertinggi (700oC) dapat berpengaruh terhadap hasil nilai kapasitansi tertinggi yaitu sebesar 165,75 F/g. Hasil perhitungan energi aktivasi menghasilkan nilai Ea terkecil yaitu 3,88 kJ/mol sehingga menandakan bahwa keberadaan logam dapat berperan sebagai katalis pada proses pirolisis. Karakterisasi BET pada bio-char menunjukkan luas permukaan spesifik sebesar 257,7 m2/g. Sementara itu, hasil karakterisasi SEM memperlihatkan permukaan char dengan persebaran pori yang banyak. Kemudian, hasil karakterisasi dengan Spektrofotometri UV-Vis memberikan hasil bahwa sampel Ni10-P550-A700 memiliki sifat konduktor. Oleh karena itu, seluruh hasil karakterisasi menunjukkan bahwa limbah tempurung kelapa hasil pirolisis dapat berfungsi sebagai penyimpan energi yang baik.

Recycling waste into usable devices is essential for the environment. Coconut shell waste can be processed as a carbon source and synthesized into active ingredients for supercapacitor electrode applications. This study aimed to determine the effect of metal impregnation conditions, pyrolysis temperature, and coconut shell activation temperature on supercapacitor performance. Supercapacitor electrodes are assembled with electrolyte KOH 3 M, binder in the form of PVA with a mixture of citric acid as a crosslinking agent, and separator using filter paper. The Ni10-P550-A700 sample obtained the best research results from the Cyclic Voltammetry test. This result shows that the pyrolysis temperature (550o"
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Tambunan, Betsyeba Bertameina
"Ampas tebu berpotensi besar untuk dimanfaatkan menjadi produk yang bernilai tinggi. Penelitian ini bertujuan untuk menghasilkan biochar dari ampas tebu melalui proses pirolisis dengan impregnasi logam dan proses aktivasi untuk digunakan sebagai bahan elektroda superkapasitor. Logam natrium dan nikel dapat memperbesar luas permukaan dan membentuk pori biochar sehingga dapat menghasilkan kinerja superkapasitor yang baik. Kandungan logam natrium dan nikel divariasikan sebesar 0%, 5%, 10%, suhu pirolisis pada 450 °C, 500 °C, 550 °C, dan suhu aktivasi pada 600°C dan 700°C. Karakterisasi dengan BET untuk mengetahui luas permukaan spesifik dan ukuran pori biochar, SEM untuk mengetahui morfologi biochar, dan band gap energy untuk mengetahui sifat konduktivitas biochar. Uji kinerja superkapasitor dilakukan dengan metode cyclic voltammetry menggunakan elektrolit KOH 3 M untuk mengetahui nilai kapasitansi. Didapatkan bahwa biochar terimpregnasi logam Ni 10% yang dipirolisis pada suhu 550 °C dan diaktivasi pada suhu 700 °C merupakan sampel terbaik untuk digunakan sebagai bahan elektroda superkapasitor yang dilihat dari terksturnya berpori, luas permukaan sebesar 285,202 m2/g, band gap energy sebesar 1 eV, dan diperoleh nilai kapasitansi spesifik sebesar 103,292 F/g yang menunjukkan bahwa biochar dapat digunakan sebagai bahan elektroda superkapasitor.

Sugarcane bagasse has great potential to be used as a high-value product. This study aims to produce biochar from sugarcane bagasse through a pyrolysis process with metal impregnation and activation process to be used as a supercapacitor electrode material. Sodium and nickel metals can increase the surface area and form biochar pores so that they can produce good supercapacitor performance. The contents of sodium and nickel were varied by 0%, 5%, 10%, pyrolysis temperature at 450°C, 500°C, 550°C, and activation temperature at 600°C and 700°C. Characterization with BET to determine the specific surface area and pore size of biochar, SEM to determine the morphology of biochar, and band gap energy to determine the conductivity properties of biochar. The supercapacitor performance test was carried out using the cyclic voltammetry method using 3 M KOH electrolyte to determine the capacitance value. It was found that 10% Ni metal impregnated biochar which was pyrolyzed at 550 °C and activated at 700 °C was the best sample for use as a supercapacitor electrode material as seen from its porous texture, surface area of 285,202 m2/g, band gap energy of 1 eV, and a specific capacitance value of 103.292 F/g was obtained which indicated that biochar could be used as a supercapacitor electrode material."
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Davina Athira Xanthi
"Sekam padi merupakan limbah yang dihasilkan dari penggilingan padi, namun kurangnya pemanfaatan dan tingginya kandungan lignin pada sekam padi membuatnya berpotensi besar untuk dimanfaatkan menjadi elektroda superkapasitor. Elektroda superkapasitor dapat menyimpan energi dalam bentuk muatan listrik yang dipisahkan oleh bahan dielektrik, serta memiliki nilai energi spesifik dan daya spesifik yang tinggi. Dalam penelitian ini, sekam padi akan diubah menjadi biochar melalui proses pirolisis dengan adanya impregnasi asam borat dan logam Fe. Pemilihan asam borat dan logam Fe dilakukan karena keduanya dapat meningkatkan karakteristik biochar, seperti perluasan permukaan dan pembentukan pori yang dapat meningkatkan kinerja superkapasitor. Penelitian ini mencakup variasi waktu aktivasi dan jumlah bahan impregnasi pada biomassa untuk memahami pengaruhnya terhadap karakteristik biochar yang dihasilkan. Kandungan asam borat dan logam Fe divariasikan sebanyak 0%, 10%, dan 15%, sementara waktu aktivasi divariasikan antara 90 menit dan 120 menit. Selain itu, dilakukan variasi konsentrasi elektrolit KOH untuk memahami pengaruhnya terhadap kinerja superkapasitor. Konsentrasi elektrolit KOH divariasikan menjadi 4 M, 5 M, dan 6 M. Hasil penelitian terbaik dari uji Cyclic Voltammetry diperoleh pada sampel AS10%-A120-6M. Ini menunjukkan bahwa waktu aktivasi selama 120 menit dan konsentrasi elektrolit sebesar 6 M dapat mempengaruhi nilai kapasitansi tertinggi yang dicapai, yaitu 198,5 F/g pada scan rate 10 mV/s. Nilai band gap energy untuk H3BO3 10% adalah 1,35 eV dan untuk Fe 10% adalah 1,55 eV. Nilai ini berada dalam rentang yang sesuai untuk superkapasitor sehingga dapat meningkatkan performa kapasitansi dengan konfigurasi asimetris.

Rice husks are waste produced from rice milling, but the lack of utilization and high lignin content in rice husks make it have great potential to be used as supercapacitor electrodes. Supercapacitor electrodes can store energy in the form of electric charges separated by a dielectric material, and have high specific energy and specific power values. In this research, rice husks will be converted into biochar through a pyrolysis process with impregnation of boric acid and Fe metal. Boric acid and Fe metal were chosen because both can improve biochar characteristics, such as surface expansion and pore formation which can improve supercapacitor performance. This research includes variations in activation time and the amount of impregnating material in the biomass to understand its effect on the characteristics of the biochar produced. The content of boric acid and Fe metal was varied by 0%, 10%, and 15%, while the activation time was varied between 90 minutes and 120 minutes. In addition, variations in KOH electrolyte concentration were carried out to understand its effect on supercapacitor performance. The KOH electrolyte concentration was varied to 4 M, 5 M, and 6 M. The best research results from the Cyclic Voltammetry test were obtained on the AS10%-A120-6M sample. This shows that an activation time of 120 minutes and an electrolyte concentration of 6 M can influence the highest capacitance value achieved, namely 198.5 F/g at a scan rate of 10 mV/s. The band gap energy value for 10% H3BO3 is 1.35 eV and for 10% Fe is 1.55 eV. This value is in the appropriate range for supercapacitors so that they can improve capacitance performance with asymmetric configurations."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fikri Dhiya Ulhaq
"TKKS memiliki kandungan lignin sebesar 17,8% dengan komposisi karbon sebanyak 44,2%. Komposisi karbon yang tinggi menandakan banyak senyawa aromatik sehingga dapat terdekomposisi menjadi nano-biochar sebagai pengganti material carbon black N-550 untuk dicampurkan pada Styrene Butadiene Rubber (SBR) guna memperkuat kekuatan mekanis ban. Penelitian ini berfokus untuk menginvestigasi pengaruh temperatur proses pyrolysis terhadap yield, komposisi, dan struktur mekanis biochar. Selain itu, penelitian ini juga menginvestigasi pengaruh variasi rasio campuran nano-biochar terhadap carbon black. Hasil penelitian menunjukkan kenaikan temperatur pada pyrolysis lignin menyebabkan nilai yield biochar yang dihasilkan menjadi mengecil, namun meningkatkan nilai fixed carbon content dari biochar. Kenaikan temperatur pada pyrolysis lignin juga menurunkan ukuran partikel nano-biochar, memperbesar volume pori dan meningkatkan area permukaan, serta menyebabkan struktur microporous pada nano-biochar. Properti mekanis nano-biochar sudah menyerupai carbon-blac N-550 dari segi ukuran partikel dan struktur microporous pada permukaan nano-biochar. Selain itu, dari segi kekuatan mekanis vulcanized rubber, komposisi 50% nano-biochar dan 50% carbon black N-550 merupakan variasi yang optimum untuk menghasilkan vulcanized rubber dengan kekuatan mekanis yang baik.

OPEFB has a lignin content of 17.8% with a carbon composition of 44.2%. The high carbon composition indicates that OPEFB contains many aromatic compounds so that they can be decomposed into nano-biochar as a substitute for carbon black N-550 for mixing in Styrene Butadiene Rubber (SBR) to strengthen the tire's mechanical strength. This study focuses on investigating the effect of pyrolysis process temperature on the yield, composition, and mechanical structure of biochar. In addition, this study also investigated the effect of variations in the ratio of nano-biochar mixture to carbon black. The results showed that the temperature increase in lignin pyrolysis caused the yield value of the resulting biochar to decrease. On the other hand, an increase in temperature increases fixed carbon content of biochar. The increase in temperature in lignin pyrolysis also reduces the particle size of nano-biochar, increases the pore volume and increases the surface area up, and causes the microporous structure of nano-biochar. The mechanical properties of nano-biochar already resemble carbon-black N-550 in terms of particle size and microporous structure on the surface of the nano-biochar. In addition, in terms of the mechanical strength of the vulcanized rubber, the composition of 50% nano-biochar and 50% carbon black N-550 is the optimal variation to produce vulcanized rubber with good mechanical strength."
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Afif Wardana
"Grafit dari biomassa sebagai elektroda alternatif untuk baterai sudah banyak dikembangkan untuk menghasilkan kapasitansi energi yang tinggi dan siklus penggunaan yang lama. Penelitian ini menentukan dan membandingkan jenis grafit NiO dan Non NiO terbaik untuk dijadikan katoda superkapasitor yang bersumber dari biomassa Tempurung Kelapa Sawit, Tempurung Kemiri, dan Tandan Kosong Kelapa Sawit (TKKS). Optimalisasi dilakukan dengan mengkombinasi proses aktivasi kimia (KOH) menggunakan konsentrasi  5 molar pada rasio 1 : 5 dan aktivasi fisika (Ar) menggunakan injeksi 0,2 L/min pada temperatur 950°C selama 45 menit. Modifikasi sampel dilakukan dengan impregnasi prekrusor Ni(NO2)3pada grafit, yang di ubah menjadi NiO melalui penguraian termal pada temperatur 300°C selama 90 menit. Dari hasil karakterisasi XRF ditemukan senyawa NiO dan menunjukan rendahnya persentase kehadiran logam alkali dan alkali tanah pada seluruh sampel grafit kecuali K+ dan Cl-. Hasil XRD menunjukan struktur yang masih didominasi grafit amorfus dengan chemical formula C16.00 (Orthorombik) yang ditemukan pada interval 25-27o . Hasil EIS menunjukan nilai Rp terendah dimiliki oleh superkapasitor AW 3 sebesar 79,62, nilai tersebut sesuai dengan hasil pengujian CV yang memiliki Kapasitansi Spesifik (Cp) tertinggi sebesar 7,39748, tetapi nilai Cp teringgi berbanding terbalik dengan hasil BET yang menunjukan luas permukaan terbesar dimiliki oleh TKKS Non-NiO sebesar 319,298 m2/g. Untuk memperdalam analisis dilakukan karakterisasi FTIR dengan tujuan mengetahui pengaruh kehadiran ikatan OH, C=C, dan C-O dan gugus fungsi lainnya terhadap peforma superkapasitor. Jadi, penggunaan grafit sebagai (katoda) dan LTO sebagai (anoda) sebagai bahan superkapsitor menjadi pilihan yang paling tepat jika penggunaan parameter scan rate (mV/s) optimal.

Graphite from biomass as an alternative electrode for batteries has been widely developed to produce high energy capacitance and long cycle usage. This research determines and compares the best types of NiO and Non-NiO graphite to be used as supercapacitor cathodes sourced from biomass such as Palm Kernel Shell, Candlenut Shell, and Empty Fruit Bunch (EFB). Optimization is done by combining chemical activation processes (KOH) using a 5 molar concentration at a 1:5 ratio and physical activation (Ar) using an injection of 0.2 L/min at a temperature of 950°C for 45 minutes. Sample modification is carried out by impregnating Ni(NO2)3 precursor on graphite, which is converted into NiO through thermal decomposition at a temperatur of 300°C for 90 minutes. From XRF characterization results, NiO compounds were found, indicating a low percentage of alkali and alkaline earth metal presence in all graphite samples except K+ and Cl-. The XRD results show a structure still dominated by amorphous graphite with a chemical formula of C16.00 (Orthorhombic) found in the 25-27o interval. The EIS results show the lowest Rp value is owned by supercapacitor AW 3 at 79.62, and this value corresponds to the CV testing results, which have the highest Specific Capacitance (Cp) at 7.39748. However, the highest Cp value is inversely proportional to the BET results, which show that the largest surface area is owned by Non-NiO EFB at 319.298 m2/g. To deepen the analysis, FTIR characterization is carried out to determine the influence of the presence of OH, C=C, and C-O bonds, and other functional groups on supercapacitor performance. So, the use of graphite as a cathode and LTO as an anode for supercapacitor material becomes the most appropriate choice with optimal scan rate parameters (mV/s)."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Chunairil Wijaya
"Levoglucosan adalah sebuah komponen utama yang berbentuk cairan kental dari hasil pirolisis biomassa yang banyak dimanfaatkan sebagai pestisida buatan, growth regulators, macrolide antibiotics dan lain-lain. Biomassa tersusun atas hemisellulosa, sellulosa, lignin dan sejumlah kecil komponen organik yang masing-masing dapat terpirolisis dan terdegradasi dengan laju yang berbeda, mekanisme dan jalur yang berbeda.
Diketahui bahwa, levoglucosan adalah produk yang paling banyak diperoleh dalam pirolisis selulosa dari biomassa. Biomassa yang digunakan dalam penelitian ini adalah cangkang kelapa sawit dan tandan kosong kelapa sawit. Pemilihan biomassa tersebut didasarkan dari komposisi biomassa tersebut yang mengandung > 30 % selulosa. Faktor kondisi operasi pirolisis yaitu holding time dan suhu optimum, telah diteliti sebelumnya dapat mempengaruhi yield levoglucosan.
Pada penelitian ini, metode pirolisis yang dipilih adalah fast pyrolysis. Pemilihan ini dikarenakan levoglucosan akan terbentuk dari depolimerasi selulosa pada tahap awal fast-pyrolysis pada rentang  suhu 315°C-400°C dan setelah itu akan terjadi secondary reaction menghasilkan turunan levoglucosan yaitu furan dan piranosa terdehidrasi.
Dalam penelitian ini, fast pyrolysis dilakukan dalam reaktor unggun tetap dengan konfigurasi looping system pada rentang suhu (450 - 550)°C, laju alir N2 adalah 1500 ml/menit dan 3000 ml/menit serta variasi biomassa adalah 51.3 gram dan 81.3 gram. Analisis levoglucosan didukung dengan instrumen GC-MS.
Hasil levoglucosan pada biomassa tandan kosong sawit tidak diperoleh karena proses pirolisis tidak terjadi sampai lapisan selulosa biomassa sedangkan pada biomassa cangkang sawit diperoleh yield levoglucosan tertinggi pada suhu 500°C dengan holding time 2.4 s yaitu sebesar 2.33 % (g/g) biomassa.

Levoglucosan is a major component in the form of thick liquid from the results of biomass pyrolysis which is widely used as artificial pesticides, growth regulators, macrolide antibiotics and others. Biomass is composed of hemicellulose, cellulose, lignin and a small amount of organic components which each can be hydrolyzed and degraded at different rates, different mechanisms and pathways.
It is known that levoglucosan is the product most obtained from cellulose pyrolysis of biomass. The biomass used in this study is  palm kernel shell and empty palm fruit bunches. The choice of biomass is based on the composition of the biomass containing > 30% cellulose. The factors of pyrolysis operating namely holding time and optimum temperature conditions that have been studied previously, can affect levoglucosan yield.
In this study, the pyrolysis method chosen was fast pyrolysis. This selection is because levoglucosan will be formed from cellulose depolymerization in the early stages of fast-pyrolysis at a temperature range of 315°C-400°C and after that a secondary reaction will occur resulting in levoglucosan derivatives namely furan and dehydrated pyranose.
In this study, fast pyrolysis was carried out in a fixed bed reactor with a looping system configuration in the temperature range (450-550)°C, the flow rate of N2 was 1500 ml/minute and 3000 ml/minute and the biomass variation was 51.3 grams and 81.3 grams. Analysis of levoglucosan was supported by the GC-MS instrument.
The results of levoglucosan in the empty palm fruit bunches biomass were not obtained because the pyrolysis process did not occur until the cellulose layer of biomass while in palm kernel shell biomass was obtained the highest levoglucosan content at 500°C with a holding time of 2.4 s which was 2.33 % (g/g) biomass.
"
Depok: Fakultas Teknik Universitas Indonesia, 2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Tobing, Zonster Maurits
"Etilena dan propilena merupakan bahan baku yang panting bagi industri petrokimia. Kedua produk ini dihasilkan dari pirolisis terhadap nafta ataupun heavy gas oil. Kelemahan dari pirolisis terhadap nafta atau heavy gas oil adalah kecilnya yield dari etilena dan propilena yang diperoleh, serta banyaknya produk samping lain yang dihasilkan. Salah satu cara yang cukup potensial adalah dengan mengganti umpan dengan etana dan propana.
Dalam tulisan ini disusun model-model persamaan matematis dalam bentuk persamaan diferensial biasa orde satu yang menggambarkan keadaan nyata proses pirolisis terhadap etana dan propana secara simultan. Model matematis yang terbentuk tersusun atas 10 persamaan neraca massa, 1 persamaan neraca energi dan 1 persamaan neraca momentum. Model matematis ini diselesaikan dengan teknik numeris yaitu metode Runge-Kutta-Gill. Untuk mendapatkan kondisi operasi yang sesuai, maka dilakukan variasi pengujian terhadap beberapa variabel masukan (dalam model persamaannya) seperti suhu, tekanan, laju umpan, komposisi umpan dan rasio steam terhadap umpan.
Hasil simulasi yang diperoleh menunjukkan bahwa konversi etana dan propana naik apabila terjadi kenaikan suhu, begitu pula bila tekanan Kenaikan konversi etana dan propana memiliki nilai optimum, akan tetapi konversi yang lebih tinggi akan menghasilkan kuantitas produk samping yang lebih banyak. Selain itu, perubahan komposisi propana sampai sebesar 50% dalam umpan etana tidak memberikan pengaruh yang cukup signifikan terhadap yield etilena.
Contoh hasil kondisi operasi yang cukup menarik adalah apabila laju umpan sebesar 0,80 kg/kg, rasio steam terhadap umpan 0,8 kg/kg suhu keluaran reaktor 920 °C, tekanan umpan 2 atm serta komposisi etana dan propana masing-masing sebesar 70% dan 30% (mol). Pada kondisi operasi ini diperoleh konversi etana dan propana sebesar 72,7% dan 92,3%, selektivitas etilena dan propilena sebesar 53,9% dan 3,1%, serta yield etilena dan propilena masing-masing sebesar 59,9% dan 3,3%."
Depok: Fakultas Teknik Universitas Indonesia, 2000
S49165
UI - Skripsi Membership  Universitas Indonesia Library
cover
Joshua Jesse Karubaba
"Penelitian ini bertujuan untuk mengeksplorasi kemungkinan menciptakan nilai tambah yang sangat besar pada sumber daya sabut kelapa yang selama ini dianggap sebagai limbah. Salah satu nilai tambah yang dapat dihasilkan dari sabut kelapa adalah bio-oil yang kaya akan senyawa aromatik. Senyawa kaya aromatik dalam bio-oil telah berhasil diproduksi melalui proses pirolisis katalitik dengan bantuan katalis ZSM-5 terimpregnasi logam Nikel dan Seng. Pirolisis adalah perengkahan termal non-oksigen dari bahan organik.
Produk pirolisis atau dikenal sebagai bio-oil digunakan sebagai bahan bakar alternatif. Namun, seiring perkembangan zaman bio-oil dapat digunakan sebagai bahan baku dalam proses pembuatan banyak produk petrokimia karena memiliki senyawa aromatik. Aromatik adalah zat kimia berbentuk cincin yang dapat ditemukan dalam biomassa yang kaya lignoselulosa. Aromatik bio-oil diperoleh dari proses pirolisis katalitik limbah sabut kelapa dengan menggunakan bantuan katalis untuk memaksimalkan komposisi senyawa aromatik. Sabut kelapa dipotong dan digiling dalam persiapan-awal ke ukuran yang diinginkan. Katalis yang diimpregnasi Zn/ZSM-5 dan Ni/ZSM-5 yang telah dikarakterisasi oleh XRD (X-Ray Diffraction) digunakan untuk memaksimalkan yield dari senyawa aromatik, juga luas permukaan spesifik katalis menggunakan analisis Branauer Emmet Teller (BET).
Proses pirolisis katalitik berlangsung di reaktor silinder unggun diam yang dilengkapi dengan tungku sebagai sumber panas. Produk yang keluar dari reaktor dikondensasi dengan menggunakan air dingin dan aseton. FTIR (Fourier Transform Infrared) dan GCMS (Gas Chromatography-Mass Spectrometer) berfungsi sebagai instrumen analitik untuk mengidentifikasi keberadaan dan kuantitas kelompok aromatik dalam bio-oil. BTX (Benzena, Toluena dan Xilena) sebagai senyawa aromatik dalam bio-oil telah diidentifikasi melalui analisis FTIR. Nikel dengan 5% berat loading adalah komponen aktif utama dalam katalis ZSM-5 yang diimpregnasi karena kinerjanya dalam menghasilkan yield tertinggi dari bio-oil aromatik sebesar 38,90%, pada suhu reaksi 450°C. Senyawa kaya aromatik dari bio-oil sebagai hasil penelitian ini dapat dianggap sebagai penemuan baru dalam menciptakan nilai tambah yang sangat besar pada sumber daya alam asli Indonesia, yang memiliki risiko minimal terhadap manusia dan lingkungan, dan dapat didaur ulang tanpa polusi.


This study is aimed to explore the possibility of creating enormous added value on coconut fiber resources which was so far considered as wastes. One of the added value of coconut fiber that can be created is bio-oil which rich in aromatic compounds. The rich-aromatic compounds within bio-oil has been produced successfully by the catalytic pyrolysis process which supported by impregnated ZSM-5 catalyst of Nickel and Zinc. Pyrolysis is a non-oxygen thermal cracking of organic materials.
Pyrolysis product or known as bio-oil is used as an alternative fuel. However, as the era progresses bio-oil can be used as raw materials in manufacturing process of many petrochemical products because it has aromatic compounds. Aromatic is a shaped-ring chemical substance that can be found in lignocellulosic-rich biomass. Aromatic bio-oil is obtained from catalytic pyrolysis process of waste coconut fiber with the aid of using catalysts to maximize the composition of aromatic compounds. Coconut fiber is cut and grind in pre-treatment to the desirable size. Impregnated catalysts Zn/ZSM-5 and Ni/ZSM-5 that have been characterized by XRD (X-Ray Diffraction) are used to maximize the yield of aromatic compounds, and also specific surface area using Branauer Emmet Teller (BET) analysis.
The catalytic pyrolysis process takes place in a fixed bed turbular reactor equipped with a furnace as a heat source. The product coming out of the reactor is condensed by using cold water and aceton. FTIR (Fourier Transform Infrared) and GCMS (Gas Chromatography-Mass Spectrometer) serve as analytical instruments in order to identify the presence and the quantity of aromatic group in bio-oil. BTX (Benzene, Toluene and Xylene) as aromatic compounds within bio-oil has been identified through the FTIR analysis. Nickel of 5% weight loading is the main active component within impregnated ZSM-5 catalysts due to its performance in producing the highest yield of aromatic bio-oil as of 38.90%, at the reaction temperature of 450°C. The aromatic-rich compounds of bio-oil as results of this study could be considered as a new invention of creating enormous added value on Indonesia original natural resources, which has a minimal risk to humans and the environment, and can be recycled without pollution.
"
Depok: Fakultas Teknik Universitas Indonesia, 2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Afiten Rahmin Sanjaya
"Pada penelitian ini preparasi komposit busa nikel termodifikasi mangan oksida dan graphene dan uji performanya sebagai elektroda untuk superkapasitor telah berhasil dilakukan. Karakterisasi menggunakan SEM-EDX dan spektroskopi Raman menunjukkan morfologi berupa bercak putih dari keberadaan mangan oksida pada kerangka busa nikel. Sedangkan karakterisasi dengan Spektroskopi Raman menunjukkan adanya puncak peak yang mengindikasikan D band dan G band dengan rasio ID/IG yang dapat menentukan keberadaan material elektroaktif graphene. Uji elektrokimia menggunakan teknik Cyclic Voltammetry (CV) menunjukkan nilai kapasitansi spesifik tertinggi pada Busa nikel/MnO2/Graphene dalam electrolit hydrogel PVA-Na2SO4 yaitu sebesar 806,16 F/g pada scanrate optimum 25 mV.s-1. Uji elektrokimia menggunakan teknik Electrochemical Impedance Spectroscopy (EIS) menunjukkan performa terbaik adalah pada Busa nikel/MnO2/Graphene dalam electrolit Na2SO4 sebesar 348,42 F/g .Uji elektrokimia menggunakan teknik Galvanostatic Charge- discharge (GCD) menunjukkan performa terbaik adalah pada Busa nikel/MnO2/Graphene dalam electrolit PVA-Na2SO4 pada arus yang diberikan sebesar 2 mA, dengan nilai kapasitansi spesifik mencapai 1680,67 F/g, densitas energi sebesar 43,60 Wh/kg dan densitas daya sebesar 838,8 W/kg.

In this study, the preparation of a modified nickel foam composite of manganese oxide and graphene and its performance test as an electrode for a supercapacitor have been successfully carried out. Characterization using SEM- EDX and Raman spectroscopy showed morphology in the form of white spots from the presence of manganese oxide in the nickel foam framework. Meanwhile, the characterization using Raman Spectroscopy showed the presence of peaks indicating D band and G band with ID/IG ratio which can determine the presence of graphene electroactive material. Electrochemical test using Cyclic Voltammetry (CV) technique showed the highest specific capacitance value in nickel/MnO2/Graphene foam in hidrogel electrolyte PVA-Na2SO4, which was 806,16 F/g at an optimum scanrate of 25 mV.s-1. The electrochemical test using the Electrochemical Impedance Spectroscopy (EIS) technique showed the best performance was on nickel/MnO2/Graphene foam at 348,42 F/g. The electrochemical test using the Galvanostatic Charge-discharge (GCD) technique showed the best performance was on nickel/MnO2/Graphene in hidrogel electrolyte PVA-Na2SO4 at a given current of 2 mA, with a specific capacitance value of 1680,67 F/g, an energy density of 43,60 Wh/kg and a power density of 838,8 W/kg."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2021
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
New York : Academic Press, 1983
660.296 PYR
Buku Teks SO  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>