Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 140106 dokumen yang sesuai dengan query
cover
Feno Valentino
"Server di LLDIKTI Wilayah III sangat penting karena server tersebut menyimpan data mirroring, seperti data PD DIKTI dan berbagai data internal LL DIKTI. Data mirroring ini sendiri menjadi data backup seandainya data dari Pusdatin Kemendikbudristek tidak dapat diakses atau mengalami kendala, seperti ketika adanya maintenance server atau terjadinya bencana alam. Tujuan penelitian ini mendeteksi keberadaan asap dan mengaktifkan alarm sebagai suara peringatan adanya kebakaran selain memantau temperatur dan kelembapan udara terkini berbasis Telegram di LLDIKTI Wilayah III. Keunikan dari penelitian ini yaitu memantau temperatur, kelembapan udara terkini dan keberadaan asap menggunakan DHT11 Temperature and Humidity Sensor dan MQ2 Gas/Smoke Sensor pada ruang server LLDIKTI Wilayah III, melalui Telegram dan Thingsboard. Kontribusi penelitian ini penambahan deteksi keberadaan asap menggunakan MQ2 Gas/Smoke Sensor (Sensor Asap MQ2) melalui Telegram dan Thingsboard. Hasil yang didapatkan dari penelitian adalah sebagai berikut: Pada skenario 1, perbedaan rata-rata suhu dan kelembapan antara sistem dengan alat higrometer HTC-2 sebesar 1,08 derajat Celcius dan 12,94 persen. Pada skenario 2, perbedaan rata-rata suhu dan kelembapan antara sistem dengan alat higrometer HTC-2 sebesar 0,009171 derajat Celcius dan 20,89743 persen. Pada skenario 3, perbedaan rata-rata suhu dan kelembapan antara sistem dengan alat higrometer HTC-2 sebesar 0,9905 derajat Celcius dan 11,9689 persen. Pada skenario 4, percobaan menunjukkan keberadaan asap berkorelasi dengan kenaikan nilai asap dan gas yang diterima sistem.

The server in LLDIKTI Region III is very important because the server stores mirroring data, such as PD DIKTI data and various internal data of LL DIKTI. This mirroring data itself becomes backup data if data from the Pusdatin Kemendikbudristek cannot be accessed or experiences problems, such as when there is server maintenance or a natural disaster occurs. The uniqueness of this research is to monitor the temperature, the latest humidity and the presence of smoke using the DHT11 Temperature and Humidity Sensor and the MQ2 Gas/Smoke Sensor in the LLDIKTI Region III server room, and send notifications to Telegram. The contribution of this research is the addition of smoke detection using MQ2 Gas/Smoke Sensor (MQ2 Smoke Sensor) via Telegram and Thingsboard. The results of this study are useful for administrators and LLDIKTI Region III to get the latest and updated information regarding temperature and humidity and the presence of smoke in the LLDIKTI Region III server room via Telegram and Thingsboard. The results obtained from the study are as follows: In scenario 1, the average difference in temperature and humidity between the system and the HTC-2 hygrometer is 1.08 degrees Celsius and 12.94 percent. In scenario 2, the average difference in temperature and humidity between the system and the HTC-2 hygrometer is 0.009171 degrees Celsius and 20.89743 percent. Inscenario 3, the average difference in temperature and humidity between the system and the HTC-2 hygrometer is 0.9905 degrees Celsius and 11.9689 percent. In scenario 4, it shows the presence of smoke correlates with an increase in the value of smoke and gas received by the system"
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Aiyuni Putri Astyani
"Industri Tekstil dan Pakaian Tekstil (TPT) Indonesia memiliki angka pertumbuhan yang fluktuatif dalam tiga tahun terakhir dan berpeluang besar mengalami peningkatan permintaan pada tahun 2021. Jumlah permintaan harus berbanding lurus dengan pemberian kualitas yang baik dengan memperhatikan faktor kualitas udara, diantaranya adalah suhu udara, kelembapan udara, dan kadar debu. Suhu dan kelembapan udara yang tinggi dapat mengakibatkan pertumbuhan jamur atau bakteri pada pakaian, sedangkan kadar debu yang tinggi dapat membuat warna pakaian pudar. Ketiga hal tersebut dapat dipantau dengan membuat sistem IoT yang menggabungkan sensor DHT22 untuk mengukur suhu dan kelembapan udara, serta GP2Y1010AU0F untuk mengukur kadar debu dan menggunakan mikrokontrolerer ESP8266 NodeMCU. Pada skripsi ini didapatkan hasil sistem yang bekerja baik dengan parameter suhu dan kelembapan udara yang sesuai dengan rata-rata masing-masing sebesar 25.08 ̊C dan 52.36% RH karena terdapat pengaturan manual pada AC dan dehumidifier. Namun, kadar debu belum sesuai < 0.025 mg/m dan tetap sebesar 0.49 mg/m karena tidak terdapat pengaturan manual pada air purifier. Penambahan fungsi RFID untuk melakukan proses pendataan inventaris pakaian juga bekerja dengan baik dan keseluruhan data sistem disimpan di dalam database MySQL lalu ditampilkan melalui dashboard website dengan alamat www.dashboard.wardrobe-purifier.net.

Textile and Apparel Textil Industry (TPT) in Indonesia has had a fluctuative growth rate for the last three years and has a high chance of increasing demand in 2021. The number of demand must be as well as providing a good quality by taking a good care with paying attention to the air quality factors that can affect the quality of clothes when it’s stored, including air temperature, humidity, and dust levels. High temperature and humidity can cause mold or bacteria to grow on clothes, meanwhile, high level of dust can make the color on clothes gets faded. These three air quality factors can be monitored by designing an IoT system that combines a DHT22 sensor to monitor air temperature and humidity, also a GP2Y1010AU0F sensor to monitor dust levels and using ESP8266 NodeMCU as the microcontroller. In this research, the result of the system for the temperature and humidity have achieved the requirement of ideal air quality with an average of 25.08˚C and 52.36% RH, respectively. This is due to manual control to the air conditioner and dehumidifier. However, the dust level has not achieved < 0.025 mg/m³, which is still 0.49 mg/m³ because there is no manual control to the air purifier. The addition of the RFID function to process the clothing inventory data also works well and the entire system data is stored in a MySQL database and then it’s displayed through the website dashboard with the website address www.dashboard.wardrobe-purifier.net."
Depok: Fakultas Teknik Universitas Indonesia, 2021
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Aiyuni Putri Astyani
"Industri Tekstil dan Pakaian Tekstil (TPT) Indonesia memiliki angka pertumbuhan yang fluktuatif dalam tiga tahun terakhir dan berpeluang besar mengalami peningkatan permintaan pada tahun 2021. Jumlah permintaan harus berbanding lurus dengan pemberian kualitas yang baik dengan memperhatikan faktor kualitas udara, diantaranya adalah suhu udara, kelembapan udara, dan kadar debu. Suhu dan kelembapan udara yang tinggi dapat mengakibatkan pertumbuhan jamur atau bakteri pada pakaian, sedangkan kadar debu yang tinggi dapat membuat warna pakaian pudar. Ketiga hal tersebut dapat dipantau dengan membuat sistem IoT yang menggabungkan sensor DHT22 untuk mengukur suhu dan kelembapan udara, serta GP2Y1010AU0F untuk mengukur kadar debu dan menggunakan mikrokontrolerer ESP8266 NodeMCU. Pada skripsi ini didapatkan hasil sistem yang bekerja baik dengan parameter suhu dan kelembapan udara yang sesuai dengan rata-rata masing-masing sebesar 25.08 ̊C dan 52.36% RH karena terdapat pengaturan manual pada AC dan dehumidifier. Namun, kadar debu belum sesuai < 0.025 mg/m dan tetap sebesar 0.49 mg/m karena tidak terdapat pengaturan manual pada air purifier. Penambahan fungsi RFID untuk melakukan proses pendataan inventaris pakaian juga bekerja dengan baik dan keseluruhan data sistem disimpan di dalam database MySQL lalu ditampilkan melalui dashboard website dengan alamat www.dashboard.wardrobe-purifier.net.

Textile and Apparel Textil Industry (TPT) in Indonesia has had a fluctuative growth rate for the last three years and has a high chance of increasing demand in 2021. The number of demand must be as well as providing a good quality by taking a good care with paying attention to the air quality factors that can affect the quality of clothes when it’s stored, including air temperature, humidity, and dust levels. High temperature and humidity can cause mold or bacteria to grow on clothes, meanwhile, high level of dust can make the color on clothes gets faded. These three air quality factors can be monitored by designing an IoT system that combines a DHT22 sensor to monitor air temperature and humidity, also a GP2Y1010AU0F sensor to monitor dust levels and using ESP8266 NodeMCU as the microcontroller. In this research, the result of the system for the temperature and humidity have achieved the requirement of ideal air quality with an average of 25.08˚C and 52.36% RH, respectively. This is due to manual control to the air conditioner and dehumidifier. However, the dust level has not achieved < 0.025 mg/m³, which is still 0.49 mg/m³ because there is no manual control to the air purifier. The addition of the RFID function to process the clothing inventory data also works well and the entire system data is stored in a MySQL database and then it’s displayed through the website dashboard with the website address www.dashboard.wardrobe-purifier.net."
Depok: Fakultas Teknik Universitas Indonesia, 2021
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ervin Halimsurya
"Generator Set yang sering di singkat menjadi genset, merupakan sebuah alat yang berfungsi untuk menghasilkan energi listrik dari beragam jenis bahan bakar. Penggunaan genset biasanya diperlukan ketika terjadinya pemadaman saluran listrik atau ketika ada kebutuhan listrik di tempat terpencil yang tidak terjangkau distribusi listrik negara. Kemampuan untuk mengawasi kondisi genset serta mengoperasikan genset dari jarak jauh dapat menjadi hal yang penting dan memudahkan pengoperasian genset terebut. Pada skripsi ini, telah dilakukan rancang bangun sistem untuk mengendalikan genset dan mengawasi parameter genset yang berupa suhu, level bahan bakar, tegangan aki, serta tegangan yang dihasilkan genset. Dari hasil penelitian telah didapatkan bahwa sistem dapat menyalakan dan mematikan genset melalui protokol komunikasi LoRaWAN melalui antares. Dari penelitian didapatkan bahwa sensor AC memiliki persentase kesalahan sebesar 7,9%, sensor DC sebesar 9,02%, sensor suhu sebesar 11,11%, dan sensor ultrasonik sebesar 13,79%. Dari penelitian didapatkan juga parameter transmisi SNR dan juga RSSI telah bernilai di dalam batas rentang yang dapat diterima LoRa dengan nilai SNR terkecil sebesar -18,5 dB dan terbesar 5 dB dan nilai RSSI terkecil sebesar -120 dB dan tertinggi -106 dB. Diperoleh juga delay dengan rata-rata sebesar 0.248 detik.

A generator set which is also known as a genset is a device that can produce electricity by consuming various kinds of fuel. Genset is commonly used in places where there is no access to electricity, be that because of a power outage or because of an isolated location that has no access to electricity. The ability to monitor and operate genset from afar might be a useful tool to simplify the maintenance and usage of genset over a distance. In this thesis, the writer has designed and implemented a prototype of a device that can monitor and operate genset from afar using Internet of Things (IoT) with LoRaWAN and Antares as its method of communication. The device was tested and connected with a genset and has the capability to turn a genset on and off again through a phone application connected to the internet. The device also has the capability of observing several parameters which are temperature, fuel level, genset’s battery voltage, and the genset’s output voltage itself. From the measured data it is obtained that the AC voltage sensor has an inaccuracy of 7,9%, the DC voltage sensor has an inaccuracy of 9,02%, the temperature sensor has an inaccuracy of 11,11%, and the ultrasonic sensor has an inaccuracy of 13,79%. The result from measurement shows that SNR has a minimum of -18,5 dB and maximum value of 5 dB and that RSSI has a minimum value of -120 dBm and maximum value of -106 dB, both of those parameters barely fulfill the threshold range required by LoRa. The delay also has an average of 0.248 seconds.
"
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhamad Ridho
"Seiring berjalannya waktu penggunaan listrik semakin meningkat tidak dapat di pungkiri lagi bahwa penggunaan listrik sudah menjadi kebutuhan bagi semua manusia, namun orang yang tinggal di pedalaman sulit untuk mendapatkan akses listrik, maka dari itu di kembangkannya DC house agar penduduk yang tinggal jauh dari kota dapat menikmati listrik dengan mudah. dengan memanfaatkan momentum teknologi yang semakin berkembang, kini juga telah dikembangkan sebuah pengaplikasian rumah pintar yang memanfaatkan teknologi. Salah satu pengembangannya adalah Internet of Things (IoT), IoT tersebut memudahkan kita untuk memantau beban listrik secara nirkabel dengan terhhubung pada koneksi internet. Jadi para pengguna DC House ini bisa memantau kondisi listrik yang terjadi melalui handphone mereka. Dengan menggunakan sensor PZEM-017 kita dapat melihat informasi mengenai tegangan, arus, dan daya yang sedang digunakkan di rumah kita melalui handphone dengan bantuan mikrokontroller Node MCU (ESP-12E) semua itu dapat terkirim ke handphone melalui jaringan internet.

As time goes by, the use of electricity has increased, it cannot be denied that the use of electricity has become a necessity for all humans, but people living in rural areas find it difficult to get access to electricity, therefore DC houses are developed so that residents who live far from the city can enjoy electricity easily. By taking advantage of the growing momentum of technology, now a smart home application that utilizes technology has also been developed. One of its developments is the Internet of Things (IoT), the IoT makes it easier for us to monitor electrical loads wirelessly by connecting to an internet connection. So DC House users can monitor the condition of the electricity through their cellphones. By using the PZEM-017 sensor we can see information about the voltage, current, and power that is being used in our homes via cellphones with the help of a MCU Node microcontroller (ESP-12E), all of which can be sent to cellphones via "
Depok: Fakultas Teknik Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Irfan Kurniawan
"ABSTRACT
Di Indonesia banyak terjadi kasus kebakaran terutama di daerah urban. Kerugian yang ditimbulkan oleh kasus-kasus kebakaran tersebut terbilang cukup besar. Hal ini disebabkan karena ketidakmampuan pemadam kebakaran untuk mengakses lokasi kebakaran pada jalan-jalan yang sempit. Dalam penelitian ini dibuat sistem pengiriman data dan navigasi purwarupa kendaraan pemadam kebakaran pintar yang berbasis Internet of Things. Sistem pengiriman data menggunakan modul WiFi ESP-01 2.4 GHz yang dihubungkan oleh mobile AP Access Point . Sistem navigasi menggunakan modul GPS u-blox NEO-6M untuk mendapatkan data latitude dan longitude. Untuk mendeteksi halangan obstacle digunakan modul ultrasonic ranging HC-SR04 yang diatur dengan batas 1 meter dari benda di depannya. Untuk mengatur kondisi gas dan rem digunakan mini servo motor 180o masing-masing satu buah dan bekerja saling berkebalikan. Untuk mengatur arah belok digunakan stepper motor 5.625o/64 step. Seluruh data hasil pengjuian dikirimkan di server dan disimpan dalam database. Dari hasil pengujian diketahui bahwa sistem bekerja sesuai dengan algoritma yang diberikan. Dari hasil pengujian diketahui bahwa terdapat packet loss sebesar 11.33 dari 300 paket data yang dikirimkan ke server. Sensor jarak mendeteksi obstacle rata-rata pada jarak 822.39 milimeter dari jarak batas seharusnya 1000 milimeter. Waktu pengereman yang dibutuhkan dari mulai terdeteksinya obstacle adalah sekitar 1-2 ms. Algoritma pelacakan yang telah dibuat sesuai dengan yang diharapkan yaitu dapat terpantau melalui website secara real-time.

ABSTRACT
There are many fire disasters happen in Indonesia especially in urban area. The damage occured because of that cases is quite massive. It happened because the firefighter can not access the fire location in small alley. In this study, the author designed a prototype of smart firefighter vehicle data logging and navigation system based on Internet of Things. The data logging system use ESP 01 WiFi module at 2.4 GHz which connected to mobile AP Access Point . The navigation system use u blox NEO 6M GPS module to get latitude and longitude coordinate data. To detect obstacles, the author use HC SR04 ultrasonic ranging module which has been set with 1 meter threshold to the obstacle at the front. To controlling acceleration and braking system, the author use 180o mini servo motor, one is for acceleration and the other one is for braking which is work in the opposite way. To controlling turning direction, the author use 5.625o 64 stepper motor. From the test results can be seen that the system has been able to work in accordance with an algorithm that is designed. Test results show that system has packet loss about 11.33 from 300 data package that sent from microcontroller to the server.Distance sensor can detect obstacle in average 822.39 millimeter distance from obstacle where it should be 1000 millimeter from obstacle. The time to brake, from time when obstacle detected by distance sensor to time when brake servo motor moved is about 1 2 millisecond. The tracking algorithm that was made meets expected result where we can monitor end device real time in website."
2017
S69486
UI - Skripsi Membership  Universitas Indonesia Library
cover
Arreza Azzam Majidy
"ABSTRACT
Fakta bahwa bertambahnya konsumsi energi listrik di Indonesia tidak mendukung pertumbuhan ekonomi sangatlah tidak sesuai dengan harapan, hal tersebut disebabkan oleh pemakaian listrik yang boros dan tidak efisien serta buruknya kualitas daya. Seiring dengan meningkatnya permintaan energi, konsentrasi karbondioksida di atmosfer bumipun naik yang disebabkan oleh hasil dari proses pembakaran bahan bakar minyak dan menyebabkan banyak permasalahan lingkungan. Berkembangnya teknologi sensor dan telekomunikasi serta IoT membuat smart electricity muncul sebagai solusi baru untuk permasalahan tersebut. Pada penelitian ini dirancang sistem pemantauan besaran listrik tegangan, arus, dan frekuensi serta emisi karbon dioksida, diberi nama Genisys yang menggunakan sensor - sensor, mikrokontroler Arduino Nano dan modul WiFi Wemos D1 Mini serta komponen pendukung lainnya. Data hasil pengukuran akan dapat diakses melalui internet. Dari hasil pengujian, nilai kesalahan pengukuran tegangan, arus, dan frekuensi dari Genisys berturut-turut sebesar 2,39, 3,59, dan 1,98. Dari data hasil pengujian menggunakan bahan bakar bensin, generator bekerja dalam keadaan paling efisien saat beban lampu 400 Watt dilihat dari konsentrasi gas buang karbondioksidanya.

< b>ABSTRACT
The increasing consumption of electrical energy in Indonesia does not support economic growth is not in line with expectations, it is caused by wasteful and inefficient power consumption also poor power quality. As energy demand increases, the concentration of carbon dioxide in the earth 39 s atmosphere rises as a result of the burning of fuel oil and causes many environmental problems. The development of sensor and telecommunication technology and IoT make smart electricity emerge as a new solution to the problem. In this study, the design of monitoring systems of electrical quantities voltage, current, and frequency and carbon dioxide emissions, named Genisys using sensors, Arduino Nano microcontroller and Wi Fi module Wemos D1 Mini and other additional components have been made. Measurement data will be accessible via the internet. From the test results, the error values of voltage, current, and frequency measurements of Genisys are 2.39, 3.59, and 1.98 respectively. From the test results data, the generator works in the most efficient state when the 400 Watt lamp load seen from its carbon dioxide exhaust gas concentration."
2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Sulthan Abdul Hafizh Allam
"Seiring bertambahnya jumlah populasi manusia, kebutuhan air bersih merupakan permasalahan yang signifikan pada beberapa kota di dunia dikarenakan air merupakan salah satu faktor penting dalam kehidupan. Hadirnya konsep Internet of Things (IoT) menciptakan langkah evolusioner dalam menghubungkan manusia dengan mesin di mana dalam konteks ini adalah water flow meter. Implementasi water flow meter berbasis IoT pada perumahan dan bangunan-bangunan komersial maupun industri dapat mengatasi permasalahan kebutuhan air bersih. Penelitian ini bertujuan untuk merancang sistem dashboard monitoring untuk water flow meter secara real-time. Implementasi perangkat ini bertujuan untuk menggantikan sistem water flow meter konvensional yang dianggap kurang efisien dalam banyak faktor. Penelitian ini menggunakan Arduino Uno, ESP32 Development Module, KEPServerEX, Antares platform, dan water flow sensor. Algoritma yang digunakan pada sistem ini adalah penggunaan KEPServerEX dalam mengurangi transmission delay pada proses pengiriman data ke cloud. Data pada sensor yang terhubung pada Arduino Uno akan dikomunikasikan via Serial Communication ke ESP32 yang akan memproses dan mengolah data sebelum dikirimkan ke server Antares via HTTP. KEPServerEX akan dihubungkan ke Arduino Uno via OPC DA Client yang akan membaca dan menyimpan data pada Arduino Uno. Ada dua skema utama dalam sistem ini. Pertama, mikrokontroler akan berperan sebagai client dengan KEPServerEX sebagai server-nya. Kedua, KEPServerEX akan menjadi client dengan platform Antares sebagai server. Pada pengujian sistem, nilai error rate yang diperoleh adalah sebesar 5.295% yang membuat keakuratan sistem ini sebesar 94.705%. Untuk pengujian Quality of Service (QoS), dilakukan pengujian pada dua parameter yaitu Packet Loss dan Transmission Delay. Packet Loss yang diuji pada sistem menghasilkan nilai sebesar 1%. Pengujian kedua dilakukan dengan menentukan delay sistem sebesar 2500 ms, 5000 ms, dan 10000 ms dengan hasil Transmission Delay yang didapat adalah sebesar 2245.025 ms, 3972.325 ms, dan 8855.925 ms. Dengan implementasi dari sistem ini yaitu faktor optimasi yang ditawarkan KEPServerEX, dapat membuat kualitas layanan sistem meningkat dalam pengurangan nilai Transmission Delay. Oleh karena itu, sistem ini sangat efektif untuk penerapan dalam meningkatkan efisiensi dari water flow meter serta human error yang biasanya terjadi saat pengukuran data penggunaan air.

As the human population increases, the need for clean water is a significant problem in several cities in the world because water is one of the important factors in life. The presence of the Internet of Things (IoT) concept creates an evolutionary step in connecting humans with machines which in this context is a water flow meter. The implementation of IoT-based water flow meters in residential and commercial and industrial buildings can overcome the problem of clean water needs. This study aims to design a dashboard monitoring system for real-time water flow meters. The implementation of this device aims to replace the conventional water flow meter system which is considered less efficient in many factors. This research uses Arduino Uno, ESP32 Development Module, KEPServerEX, Antares platform, and water flow sensor. The algorithm used in this system is the use of KEPServerEX in reducing transmission delay in the process of sending data to the cloud. The data on the sensors connected to the Arduino Uno will be communicated via Serial Communication to the ESP32 which will process the data before being sent to the Antares server via HTTP. KEPServerEX will be connected to Arduino Uno via OPC DA Client which will read and store data on Arduino Uno. There are two main schemes in this system. First, the microcontroller will act as a client with KEPServerEX as the server. Second, KEPServerEX will be a client with the Antares platform as a server. In testing the system, the error rate obtained is 5.295% which makes the accuracy of this system 94.705%. For Quality of Service (QoS) testing, two parameters were tested, namely Packet Loss and Transmission Delay. Packet Loss tested on the system produces a value of 1%. The second test was carried out by determining the system delay of 2500 ms, 5000 ms, and 10000 ms with the Transmission Delay results obtained were 2245,025 ms, 3972,325 ms, and 8855,925 ms. With the implementation of this system, namely the optimization factor offered by KEPServerEX, it can make the quality of system service increase in reducing the value of Transmission Delay. Therefore, this system is very effective for application in increasing the efficiency of the water flow meter as well as human errors that usually occur when measuring water usage data."
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rendy Christian
"Pencemaran udara sebagai dampak dari pertumbuhan industri dan aktivitas manusia telah menjadi perhatian global. Salah satu kategori polutan udara yang berbahaya bagi kesehatan manusia adalah particulate matter (PM) 2.5. Laporan IQAir mencatat rata-rata konsentrasi PM2.5 di Indonesia per tahun 2022 sekitar 30,4 mikrogram per meter kubik, atau enam kali lipat lebih besar dari standar aman WHO. Dalam menanggapi kompleksitas masalah ini, penelitian ini merancang sistem deteksi dini dan monitoring polutan PM2.5 berbasis komunikasi LoRa 920 MHz dan Internet-of-Things (IoT) dengan sensor low-cost DSM501A. Penggunaan komunikasi LoRa, dengan menggunakan modul LoRa RFM95 pada frekuensi 920 MHz, menawarkan jangkauan transmisi atau coverage yang luas. Hasil deteksi partikel particulate matter divisualisasikan dalam bentuk laman web berbasis React Vite, Tailwind CSS, dan Node.js. Pengujian QoS komunikasi LoRa dilakukan dengan memprediksi path loss dan RSSI dengan pendekatan Okumura-Hata, serta mengukur nilai aktual SNR, RSSI, dan PDR, pada 10 titik pengujian di kawasan Universitas Indonesia. Hasil pengujian menunjukkan transmisi sinyal LoRa berhasil terkirim pada 8 dari 10 titik pengujian, dengan rentang jarak dari 8 m hingga 362.43 m, dengan nilai RSSI yang variatif pada rentang -85.87 dBm hingga -111.27 dBm, nilai SNR pada rentang 8.30 dB hingga -8.83 dB, serta PDR% pada rentang 100 % hingga 12.5 %, yang menunjukkan bahwa variabel LoRa seperti spreading factor, bandwidth, dan frekuensi, maupun variabel lingkungan, seperti jarak, area lintasan propagasi, dan vegetasi sangat mempengaruhi QoS transmisi sinyal LoRa di kawasan urban. Sementara itu, pada periode 14 hari pengumpulan data, total rata-rata polutan PM2.5 berdasarkan kategori waktu adalah pada tanggal 4 Juni 2024, yakni 149.42 mikrogram per meter kubik. Berdasarkan total rata-rata PM2.5 harian, indeks tertinggi terdapat pada hari Rabu, 5 Juni 2024, yakni 113.35 mikrogram per meter kubik. Rata-rata tertinggi indeks PM2.5 berdasarkan kategori waktu selama 14 hari pengumpulan data adalah pada siang hari.

Air pollution, as a consequence of industrial growth and human activities, has become a global concern. One of the categories of air pollutants that poses a significant threat to human health is particulate matter (PM) 2.5. The IQAir report recorded an average PM2.5 concentration in Indonesia in 2022 of approximately 30.4 micrograms per cubic meter, which is six times higher than the WHO's safe standard. In response to this complex issue, this study designs an early detection and monitoring system for PM2.5 pollutants based on 920 MHz LoRa communication and the Internet of Things (IoT) using the low-cost DSM501A sensor. The use of LoRa communication, utilizing the LoRa RFM95 module at a 920 MHz frequency, offers a wide transmission range or coverage. The detected particulate matter data is visualized in the form of a web page based on React Vite, Tailwind CSS, and Node.js. The QoS testing of LoRa communication is conducted by predicting path loss and RSSI using the Okumura-Hata model and measuring actual values of SNR, RSSI, and PDR at 10 test points within the University of Indonesia area. The test results indicate that LoRa signal transmission successfully reached 8 out of 10 test points, with distances ranging from 8 m to 362.43 m, with varying RSSI values between -85.87 dBm and -111.27 dBm, SNR values between 8.30 dB and -8.83 dB, and PDR% ranging from 100% to 12.5%, showing that LoRa variables such as spreading factor, bandwidth, and frequency, as well as environmental variables like distance, propagation path area, and vegetation, significantly affect the QoS of LoRa signal transmission in urban areas. Meanwhile, during the 14-day data collection period, the total average PM2.5 pollutants by time category was on June 4, 2024, at 149.42 micrograms per cubic meter. Based on the total daily average PM2.5, the highest index was on Wednesday, June 5, 2024, at 113.35 micrograms per cubic meter. The highest average PM2.5 index by time category during the 14-day data collection period was during the daytime."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Aldendinandra Abdurahman
"Peningkatan jumlah populasi di Indonesia tidak diiringi dengan produktivitas pangan di Indonesia. Hal ini diindikasikan oleh 23,22 juta jiwa yang mengalami kekurangan pangan pada tahun 2021. Berdasarkan Sustainable Development Goals, salah satu cara untuk menurunkan angka kelaparan adalah dengan meningkatkan riset dan teknologi yang berkaitan dengan produktivitas agrikultur. Salah satunya adalah mengembangkan suatu lingkungan terkontrol bagi tumbuhan untuk berkembang. Dalam skripsi ini, penulis mengajukan sistem pemantauan dan pengontrolan kebun hidroponik modular berbasis Internet of Things. Sistem ini dirancang agar mampu mengontrol parameter kualitas air yang optimal yang disesuaikan dengan jenis tumbuhan pada sehingga tumbuhan tersebut dapat tumbuh dengan baik. Berdasarkan percobaan yang dilakukan, sistem mampu memantau dan mengendalikan parameter pH dan Electrical Conductivity (EC) meskipun dengan tingkat eror sebesar 46% terhadap nilai pH meter dan 2,88% terhadap nilai TDS meter. Melalui implementasinya, sistem dapat dijadikan sebagai prototipe yang rendah biaya dan perlu ditingkatkan kinerjanya melalui penelitian lebih lanjut

nesia’s food productivity is not compensated by the country’s everincreasing population. This is indicated by 23.22 million people in Indonesia that experienced food shortage in 2021. Based on the Sustainable Development Goals, one way to reduce hunger is by improving research and technology related to agricultural productivity. One’s effort is by developing a controlled agriculture environment. This thesis proposes a modular monitoring and automation system for hydroponic farms based on Internet of Things. The proposed system is designed to monitor and control the water quality parameters best suitable for the designated plant type to grow. Measurement results indicated the system managed to successfully monitor and control the pH and Electrical Conductivity (EC) values with an error value of 46% and 2,88%, each towards the pH meter and TDS meter measurements respectively. The proposed system maintains its low-cost features and future work is mandatory to increase the performance of the system"
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>