Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 162329 dokumen yang sesuai dengan query
cover
Nusye E. Zamsiar
"ABSTRAK
Ruang lingkup dan cara penelitian : Pemaparan panas di lingkungan kerja dapatmenimbulkan berbagai keluhan dan gangguan kesehatan. Salah satu keluhan yang ditemukan adalah kram otot, yang diduga erat hubungannya dengan penurunan kadar natrium serum. Penelitian ini bertujuan untuk mendapat data tersebut agar dapat dimanfaatkan sebagai salah satu upaya pencegahan sebelum terjadinya keluhan atau gangguan kesehatan. Penelitian dilakukan secara kuasi eksperimental dengan menggunakan " non randomized controlled group pre-test post-test design" . Untuk melihat tingginya tingkat pemaparan panas di lingkungan kerja digunakan nilai "heat stress index" ; sedangkan untuk melihat pengaruhnya terhadap tenaga kerja yang terpapar dilakukan dengan menggunakan kuesioner, pengamatan, pengukuran dan pemeriksaan kadar natrium dalam serum secara laboratoris (sebelum dan sesudah bekerja) serta kadar natrium dalam keringat.
Hasil dan kesimpulan : Tingkat pemaparan panas di lingkungan kerja PT BDJ telah melampaui batas yang diperkenankan. Hasil penelitian yang dilakukan terhadap 98 subyek yang terpapar panas dan 44 subyek yang tidak terpapar menemukan adanya kecenderungan untuk menurunnya kadar natrium serum serta timbulnya keluhan kram otot pada subyek yang terpapar panas dengan uji statistik yang bermakna. Faktor-faktor yang berpengaruh terhadap penurunan kadar natrium serum adalah jenis sarapan pagi yang di konsumsi, luas permukaan tubuh serta besarnya kehilangan natrium melalui keringat.;Serum Sodium Level Of Workers Exposed To Heat At A Steel Melting Plant PT. BDJScope and method: Heat exposure has led to many symptoms and health problems. Muscle cramps as one of these symptoms is reportedly strongly Associated with reduced sodium levels in serum.

ABSTRACT
Scope and method: Heat exposure has led to many symptoms and health problems. Muscle cramps as one of these symptoms is reportedly strongly Associated with reduced sodium levels in serum.
The purpose of this quasi experimental study, using a randomized controlled group pre-test post-test design, is to asses the nature of serum sodium level of workers exposed to a hot climate in the working environment. It is hoped that results-of this study will be helpful in the strategic planning of early preventive measures.
Heat exposure level in the working environment was measured by using the "heat stress index?. Questioners, physical examinations and quantitative measurements of sodium levels in serum and in sweat; have been used to evaluate health status. Measurement of serum sodium levels was performed before and after work.
Result and conclusions: Heat exposure level in the working environment exceeded the threshold limit value. Data from 98 workers of the exposed group compared to data from 44 workers of control group, revealed a definitive trend of reduced serum sodium levels of workers from the exposed group. Muscle cramps was significantly associated with reduced sodium levels in serum. Factors associated with reduced serum sodium levels are type of food consumed for breakfast, body measurements and sodium loss through sweat.
"
Depok: Universitas Indonesia, 1994
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Alwina Fitria Maulidiani
"Kombinasi dari temperatur lingkungan kerja, panas metabolik dari tubuh pekerja, pakaian kerja, dan faktor individu dapat menimbulkan tekanan panas (heat stress) bagi pekerja di area peleburan, proses sekunder, dan pengecoran SSP PT Krakatau Steel. Tekanan panas berpotensi menimbulkan gangguan kesehatan (heat-related disorders) yang diawali dengan berbagai respon fisiologis tubuh (heat strain) berupa gejala-gejala atau keluhan yang dirasakan secara subjektif oleh pekerja. Penelitian dilakukan pada 51 orang responden dengan desain studi cross sectional deskriptif. Hasil penelitian menunjukkan bahwa responden yang mengalami tekanan panas adalah 36 orang dari 51 responden (70,6%) di area peleburan dan proses sekunder. Seluruh responden merasa bahwa suhu lingkungan kerja mereka panas dan 74,5% responden merasa tidak nyaman (terganggu) dengan kondisi panas tersebut. Oleh karena itu, diperlukan berbagai upaya pengendalian dari segi teknis, administratif, maupun penyediaan alat pelindung diri untuk meminimalisasi risiko timbulnya keluhan yang dirasakan pekerja akibat tekanan panas.

The combination of work environment temperature, metabolic heat, clothing, and individual factors could generate heat stress for workers in melting, secondary process, and casting area of SSP PT Krakatau Steel. Heat stress could potentially generate heat related disorders which started with physiological responses (heat strain), remarked as workers’ subjective complaints. This study performed on 51 workers using cross sectional descriptive study design. The results showed that there are 36 among 51 respondents (70,6%) in melting and secondary process area experienced heat stress. All respondents felt the work environment temperature was hot and 74,5% felt uncomfortable with it. Therefore, efforts are needed, such as technical and administrative controls and also distribution of personal protective equipments, to minimize the risk of heat stress signs."
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2013
S45178
UI - Skripsi Membership  Universitas Indonesia Library
cover
Syarifuddin
"Latar Belakang : Pneumokoniosis terjadi hampir diseluruh dunia dan merupakan masalah yang mengancam para pekerja semen. Beberapa kelainan serologis dapat ditemukan pada pasien pnemokoniosis. Kadar KL-6 serum meningkat pada pekerja yang terpajan silika sehingga  dapat dijadikan penanda hayati untuk diagnosis awal penyakit paru kerja tetapi penelitian ini belum pernah dilakukan di Indonesia
Metode : Penelitian ini merupakan penelitian cross sectional dengan cara pemilihan sampel secara consecutive sampling pada bulan april – mei 2018. Jumlah total subjek sebanyak 77 subjek terdiri dari 60 subjek penelitian dan 17 subjek kontrol. Pemeriksaan kadar KL-6 serum menggunakan metode ELISA. Subjek penelitian merupakan pekerja semen pada area produksi dan bahan mentah.
Hasil    : Pada penelitian ini didapatkan hasil dengan karakteristik total subjek laki-laki 100% dan rerata umur 42,5 tahun, subjek termuda 21 tahun dan subjek tertua 55 tahun. Riwayat merokok  ditemukan terbanyak bukan perokok 38 subjek (63,3%), diikuti perokok sebanyak 15 subjek (25%), dan bekas perokok sebanyak 7 subjek (11,6%).Tingkat pendidikan sedang 47 subjek (78,3) pendidikan tinggi sebanyak 7 subjek (11,6%)  dan pendidikan rendah sebanyak 6 subjek (10%). Lama pajanan < 10 tahun sebanyak 13 subjek (21,6%) dan lama pajanan> 10 tahun sebanyak 47 subjek (78,3%). Penggunaan alat pelindung diri kategori terbanyak kategori sedang sebanyak 50 subjek (83,3%), kategori baik sebanyak 7 subjek (11,6%) dan kategori buruk sebanyak 3 subjek (5%). Rerata kadar KL-6 serum pada kelompok subjek penelitian atau kelompok terpajan sebesar 473,13 U /ml dan rerata kadar KL-6 serum pada kelompok kontrol sebesar 344,13 U/ml.Perbedaan kadar KL-6 serum pada kelompok terpajan dan kelompok control tidak berbeda bermakna secara statistic dengan nilai p = 0,329.
Kesimpulan : Perbedaan antara kadar KL-6 serum kelompok terpajan disbanding kelompok kontrol tidak berbeda bermakna secara statisti

Background   : Pneumoconiosis occurs almost all over the world and is a problem that threatens cement workers. Some serological abnormalities can be found in pneumonia patients. Serum KL-6 levels increase in workers exposed to silica so that it can be used as a biological marker for early diagnosis of occupational lung disease but this study has never been done in Indonesia
Method: This study was a cross-sectional study by consecutive sampling in April-May 2018. The total number of subjects was 77 subjects consisting of 60 research subjects and 17 control subjects. Examination of serum KL-6 levels using the ELISA method. Research subjects were cement workers in the production area and raw materials.
Results: In this study, the results were obtained with the characteristics of the total male subjects 100% and the average age of 42.5 years, the youngest subject was 21 years old and the oldest subject was 55 years old. History of smoking was found in the majority of nonsmokers 38 subjects (63.3%), followed by smokers as many as 15 subjects (25%), and former smokers as many as 7 subjects (11.6%). Education level was 47 subjects (78.3) higher education as many as 7 subjects (11.6%) and low education as many as 6 subjects (10%). The duration of exposure <10 years was 13 subjects (21.6%) and the duration of exposure> 10 years was 47 subjects (78.3%). The use of personal protective equipment is the most moderate category as many as 50 subjects (83.3%), the good category is 7 subjects (11.6%) and the bad category is 3 subjects (5%). The mean serum KL-6 level in the research subject group or the exposed group was 473.13 U / ml and the average serum KL-6 level in the control group was 344.13 U / ml. The difference in serum KL-6 level in the exposed group and the control group no statistically significant difference with a value of p = 0.329.
Conclusion: The difference between serum KL-6 levels in the exposed group compared to the control group was not statistically significant
"
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2019
SP-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Lihawa, Wahyudin
"Penelitian ini bertujuan untuk memberikan gambaran hubungan antara intensitas bising dengan gangguan pendengaran terhadap pekerja.Penelitian dilakukan terhadap 349 responden di bagian Steel Melting dan Rolling Mills PT X pada bulan Maret - Juni 2014 menggunakan desain cross-sectional, data primer berupa hasil pengukuran intensitas bising dan audiogram, data sekunder berupa gambaran umum perusahaan. Hasil penelitian menunjukkan bahwa 52 responden (14,9%) mengalami gangguan pendengaran, responden yang mengalami gangguan pendengaran terbanyak yaitu sebesar 59,6% (31 responden) adalah responden yang bekerja di Area Steel Melting yang memiliki intensitas kebisingan >85 dB. Penelitian menunjukkan gangguan pendengaran tidak berhubungan dengan pajanan debu, riwayat penyakit Diabetes melitus dan riwayat penyakit Hipertensi (p-value>α(0,05). Untuk mencegah terjadinya gangguan pendengaran kepada pekerja lainnya, perlu dilakukan upaya pengendalian risiko dengan melakukan pengendalian teknis, pengendalian administratif dan perlindungan kepada pekerja yang bekerja di area tersebut.

This study aims to provide an overview of the relationship between the intensity of noise with a hearing loss of workers. Study was conducted on 349 respondents at the Steel Melting and Rolling Mills PT X in March - June 2014 using cross-sectional design, the primary data in the form of noise intensity measurement results and results of audiometric measurement, secondary data from a general overview of the company. The results showed that 52 respondents (14.9%) had hearing loss, respondents who have a hearing loss that is equal to 59.6% (31 respondents) of respondents who work in Steel Melting areas that have noise intensity > 85 dB. Research showed hearing loss is not related to dust exposure, history of diabetes mellitus and a history of hypertension (p-value> α (0.05). To prevent hearing loss to other workers, risk control efforts should be made to perform technical control, control administrative and protection to employees who work in the area.
"
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2014
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Nurlinah Jalil
"ABSTRAK
Latar Belakang: Pneumokoniosis terjadi hampir diseluruh dunia dan merupakan masalah yang mengancam para pekerja semen. Beberapa kelainan serologis dapat ditemukan pada pasien pneumokoniosis. Kadar surfaktan SP-D serum meningkat pada pekerja yang terpajan silika sehingga mungkin dapat dijadikan sebagai penanda hayati untuk diagnosis awal penyakit paru kerja tetapi penelitian ini belum pernah dilakukan di Indonesia. Metode: Penelitian ini merupakan penelitian cross sectionaldengan cara pemilihan sampel secara consecutive sampling pada bulan September 2017- Maret 2018. Jumlah total subjek sebanyak 61 subjek terdiri dari 44 subjek penelitian dan 17 subjek kontrol. Pemeriksaan kadar SP-D menggunakan metode ELISA. Subjek penelitian merupakan pekerja semen pada area produksi dan bahan mentah. Hasil: Pada penelitian ini didapatkan hasil dengan karakteristik total subjek laki-laki 100 dan rerata umur 42.5 tahun, subjek termuda 21 tahun dan subjek tertua 55 tahun, Kelompok IMT normal terbanyak pada subjek penelitian yaitu 21 subjek 47.7 diikuti IMT lebih 14 subjek 2.3 , obesitas 8 subjek 18.2 dan IMT kurang sebanyak 1 subjek 4.6 . Riwayat merokok ditemukan terbanyak bukan perokok 26 subjek 59.1 diikuti perokok sebanyak 12 subjek 27.3 dan bekas perokok 6 subjek 13.6 . Lama pajanan ABSTRACT
Background:Pneumoconiosis occurs almost in entire worldwide. Pneumoconiosis has threaten cement workers. Serologic abnormalities has been found in pneumoconiosis. Surfactant Protein D SP-D levels increased in silica exposed workers. Surfactant Protein D SP-D may be useful using biomarkers for early diagnosis of pneumoconiosis but It has not yet been studied in Indonesia. Method:Design of this study was observational with cross sectional.Sampling of cement from exposed workers were done by consecutive sampling. Total subjects were 61, approach population of 44 cement exposed workers from September 2017-March 2018and 17 healthy people as control. Serum level of SP-D was measured by ELISA method.Cement exposed workers are workers in production area and workers in quarry area. Results:This study found that total characteristic subjects were male 100 and mean of age was 42.5 years old, youngest subject was 21 years old and oldest subject was 55 years old. Normal weight group greatest number was found 21 subjects 47.7 , followed by overweight 12 subjects 22.3 , obesitas 8 subjects 18.2 and underweight 1 subject 2.3 . Based on history of smoking, this study found that 26 subjects 59.1 had never smoked,12 subjects 27.3 as smokers and 6 subjects 13.6 as former of smokers. Duration of exposure "
2018
SP-PDF
UI - Tugas Akhir  Universitas Indonesia Library
cover
Hasibuan, Zuainah Saswati
"Serat asbes yang terinhalasi masuk ke dalam alveolus menyebabkan terjadinya peningkatan produksi reactive oxigen spesies (ROS) yang dapat memicu terjadinya reaksi inflamasi. Interleukin 6 merupakan penanda reaksi inflamasi akibat pajanan serat asbes. Vitamin C dan E merupakan antioksidan yang bekerja sebagai scavenger ROS. Vitamin C juga dapat menghambat aktivitas faktor transkripsi NFқB. Vitamin E selain dapat menghambat aktivitas faktor transkripsi JAK/STAT3 dan NFқB, juga dapat menghambat aktivitas COX2 dan LOX5.
Penelitian potong lintang di sekretariat serikat buruh pabrik asbes X Kabupaten Karawang bulan Oktober 2014 dilakukan untuk menilai korelasi asupan vitamin C, E dengan kadar interleukin 6 pada pekerja pabrik asbes. Lima puluh dua pekerja pabrik asbes berhasil menyelesaikan protokol penelitian. Hasilnya menunjukkan tidak terdapat korelasi bermakna (p >0,05) antara asupan vitamin C dengan kadar IL-6 dan antara asupan vitamin E dengan kadar IL-6. Terdapat korelasi positif antara kadar vitamin C dengan kadar IL-6 (r = 0,31) dengan p <0,05, namun tidak terdapat korelasi antara kadar vitamin E dengan kadar IL-6.

Asbestos fibers that are inhaled into the alveoli cause increased production of reactive oxygen species (ROS) which may trigger inflammation reaction. Interleukin 6 (IL-6) is a marker of inflammation reaction caused by asbestos fibers exposure. Vitamin C and vitamin E are antioxidants acting as ROS scavengers. Vitamin C can also inhibit the activity of transcription factor NFқB. Vitamin E can inhibit the activities of transcription factors JAK/STAT3 and NFқB as well as the activities of COX2 and LOX5.
A cross-sectional sudy at a labor union secretariat in Karawang Regency in October 2014 was conducted to evaluate the correlations between intakes and levels of vitamin C and vitamin E and level of IL-6 in asbestos factory workers. Fifty two asbestos factory workers finished the study. The result showed no significant correlation between vitamin C intake and IL-6 level or between vitamin E intake and IL-6 level. There was a moderate positive correlation between vitamin C level and IL-6 level (r = 0.31, p <0.05), but there was no correlation between vitamin E level and IL-6 level.
"
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2014
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Saragi, Arnaldo Hasudungan
"Transformator adalah salah satu peralatan listrik yang mempunyai peran yang sangat penting dalam suatu sistem tenaga listrik. Oleh karena itu memperhatikan dan memastikan transformator agar selalu dalam keadaan baik merupakan suatu keharusan yang harus dilakukan. Salah satu faktor yang berpengaruh terhadap kondisi dari transformator adalah minyak transformator. Pengujian minyak transformator merupakan tindakan yang sering kali dilakukan guna mengetahui dan menganalisis kondisi dari transformator serta jenis kegagalan yang terjadi pada transformator. Pengujian minyak transformator meliputi pengujian terhadap parameter kualitas minyak isolasi dan pengujian analisis gas terlarut (DGA). Pada skripsi ini akan dilakukan analisis terhadap kondisi dari transformator peleburan EAF 9 pada Pabrik Baja Slab 2 PT. Krakatau Steel berdasarkan hasil pengujian terhadap minyak transformator peleburan EAF 9. Berdasarkan hasil pengujian terhadap minyak transformator peleburan EAF 9 mulai tahun 2008 hingga 2013, didapatkan beberapa hasil analisis terkait kondisi dari transformator peleburan EAF 9. Yaitu berdasarkan pengujian terhadap beberapa parameter kualitas minyak isolasi disimpulkan bahwa kondisi dari minyak isolasi dari transformator peleburan EAF 9 masih tergolong dalam keadaan baik. Sedangkan berdasarkan interpretasi terhadap hasil pengujian DGA, disimpulkan bahwa indikasi kegagalan yang terjadi pada transformator peleburan EAF 9 berupa pemanasan pada kertas isolasi dan minyak transformator.
Power transformer is one of the most important electric equipment and vital link in a power system. Because of that, pay attention and ensure that transformer is always in good condition is a necessity which must be performed. One of the things that can affect the power transformer condition is insulating oil of transformer. Insulating oil testing is routinely used to investigate and diagnose transformer condition and the types of faults which are occurred in the power transformer. There are two types of insulating oil testing which are often performed, those are oil contamination testing and DGA (dissolved gas analysis) testing. In this paper will be performed analysis about the condition of furnace transformer of Electrical Arc Furnace 9 in Slab Steel Plant 2 PT. Krakatau Steel according the results of insulating oil testing. According the results of insulating oil testing of furnace transformer in Electrical Arc Furnace 9 since 2008 until 2013, there are some analysis that recognized about the condition of furnace transformer. According the result of oil contamination testing, can be decided that the condition and quality of insulating oil of transformer is still classified in good condition. And according interpretation from the result of DGA testing, can be decided that there are some faults that detected in the furnace transformer, those are overheating of cellulose and overheating of oil."
Depok: Fakultas Teknik Universitas Indonesia, 2014
S55237
UI - Skripsi Membership  Universitas Indonesia Library
cover
Safiera Amelia
"PT XYZ adalah industri manufaktur yang memiliki proses produksi yang menghasilkan panas dan berpotensi menimbulkan heat stress bagi pekerja. Penelitian ini bertujuan untuk mengetahui faktor-faktor yang berhubungan dengan tingkat keluhan subjektif akibat tekanan panas pada pekerja di area fermentasi kedelai dan pemasakan PT XYZ. Penelitian dilakukan pada 55 responden dengan desain studi cross sectional deskriptif. Wet Bulb Globe Temperature (WBGT) digunakan untuk mengukur risiko tekanan panas. Kuesioner menilai keluhan subjektif pekerja akibat tekanan panas.
Hasil menunjukkan indeks WBGT rata-rata di area adalah 27,35°C - 32,29°C. Terdapat 70,9% responden mengalami tekanan panas dan 54,5% mengalami keluhan ringan. Keluhan subjektif utama yaitu banyak berkeringat (67,3%) dan merasa haus (50,9%). Faktor-faktor yang berhubungan dengan tingkat keluhan subjektif, yaitu kejadian tekanan panas (p value= 0,001) dan beban kerja (p value= 0,019). Rekomendasi dari segi teknis, administratif, maupun personal dibutuhkan untuk meminimalisasi keluhan subjektif dan dampak kesehatan akibat tekanan panas.

PT XYZ is a manufacturing industry which has production process that produces heat and potentially cause heat stress for workers. The purpose of this study was to determine factors related to the level of subjective complaints due to heat stress among workers in soybean fermentation and cooking area. This study performed on 55 workers using cross sectional descriptive study design. Wet Bulb Globe Temperature (WBGT) were used to quantify risk of heat stress. Questionnaires assessed worker's subjective complaints from heat stress.
Results showed WBGT index in the average area are 27,35°C - 32,29°C. About 70,9% respondents experienced heat stress and 54,5% suffered minor complaints. The most subjective complaints were excessive sweating (67,3%) and feeling thirsty (50,9%). Factors related to the level of subjective complaints were heat stress (p value= 0,001) and workload (p value= 0,019). Hence, the recommendation such as engineering, administrative, and personal control are needed to minimize the subjective complaints and adverse health effect of heat stress.
"
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2017
S68140
UI - Skripsi Membership  Universitas Indonesia Library
cover
Annisa Andina Sonia
"Perkembangan Industri pada masa sekarang berkembang sangat pesat. Dengan adanya perkembangan industri ini membuat banyak perusahaan industri yang membutuhkan tenaga kerja, tidak terkecuali industri peleburan baja. Industri peleburan baja itu sendiri telah mendapat cukup perhatian di kalangan praktisi bidang kesehatan dan keselamatan kerja karena resiko dan bahaya kecelakaan ataupun penyakit akibat kerja yang cukup tinggi. Bahaya terhadap kesehatan pada proses peleburan serta produksi baja disebabkan lingkungan kerja yang bising, polusi udara, adanya debu, logam berat serta panas yang berpotensi menimbulkan penyakit akibat kerja, ditambah dengan adanya resiko keselamatan pekerja akibat alat-alat kerja yang digunakan seperti mesin-mesin pemotongan, alat-alat berat, serta penggunaan Alat Perlindungan Diri APD yang minim. Karena itu, perlindungan hukum terhadap kesehatan dan keselamatan pekerja sangat diperlukan dan harus dilaksanakan oleh pengusaha maupun pekerja itu sendiri sesuai dengan yang telah diatur oleh Undang-Undang. Namun tidak sedikit dari pekerja itu sendiri yang telah mengabaikan kewajibannya dalam menerapkan kesehatan dan keselamatan kerja di lingkungan kerjanya. Untuk menjawab permasalahan tersebut, penelitian ini yang membahas mengenai Hukum Kesehatan Dan Keselamatan Kerja Sebagai Bentuk Perlindungan Bagi Pekerja Unit Peleburan Baja Industri Steel Manufacturing Di PT. GG dilakukan secara Yuridis Normatif yang bersifat deskriptif analitis. Data yang digunakan adalah data sekunder. Teknik analisis data yang digunakan adalah kualitatif dimana pengumpulan data dilakukan dengan wawancara langsung dan melihat langsung kondisi lingkungan perusahaan sehingga penulis dapat mengetahui lebih dalam mengenai pelaksanaan program kesehatan dan keselamatan kerja. Data yang dibutuhkan adalah data sekunder yang terdiri dari bahan hukum primer, bahan hukum sekunder, dan bahan hukum tersier. Hasil dari penelitian adalah diketahui bahwa perusahaan telah melakukan upaya-upaya untuk melaksanakan perlindungan hukum terhadap kesehatan dan keselamatan kerja seperti menyediakan Alat Perlindungan Diri APD , melakukan pengawasan terhadap pekerja, pemeliharaan alat-alat kerja, dan sebagainya. Namun pelaksanaan kesehatan dan keselamatan kerja ini belum sepenuhnya dapat diterapkan karena lemahnya kesadaran diri dari pekerja itu sendiri.

The industrial development in this era has rapidly growing. This development causes a lot of industrial companies needing handful of manpower, and that includes the steel smelting industrial companies also. Those Steel companies have gotten enough concern among practicioners in the field of health and safety because of the risks and the dangers and also the poor sickness the workers get because of the hardwork. The danger towards the workers rsquo health in the process of smelting and producting the steel is caused by the loud of the work environment, air pollution, the scattered dust, the heaviness of the steel and also the severe heat who potentially cause diseases and sickness. Not to mention the risks and danger the workers would get because of the industry tools such as the cutting machines, the heavy too, and the poorly used of Personal Protective Equipment PPE . Therefore, legal protection of occupational health and safety is indispensable and must be carried out by the workers themselves and the employer in accordance with the legislation in force. But still there are a lot of those workers who ignore its obligations in implementing occupational health and safety in the work environment. To answer these problems, this study discusses ldquo Occupational Health and Safety Law As A Protection Form For Steel Smelting Unit Workers in Steel Manufacturing at PT. GG rdquo is Normative Juridically performed and analytically descriptive. The data used is secondary data. The data analysis technique used is qualitative where the data collection was done by direct interview and direct look of the company rsquo s environmental conditions so that authors can know more about the implementation of occupational health and safety program. The required data is secondary data concists of primary legal materials, secondary law, and tertiary legal materials. The results of the study shows that the company has made efforts to implement the legal protection of the occupational health and safety such as providing personal protection equipment PPE , to supervise the workers, maintain the work tools, and so forth. However, the implementation of occupational health and safety have not been fully implemented due to the lack of self consciousness of the workers themselves."
Depok: Universitas Indonesia, 2017
S66741
UI - Skripsi Membership  Universitas Indonesia Library
cover
Hendra
"Bahaya panas di lingkungan kerja merupakan salah satu faktor yang dapat menyebabkan terjadinya gangguan kesehatan dan penyakit akibat kerja pada pekerja. PT. Pindad (Persero) yang salah satu proses produksinya dilakukan pada temperatur tinggi yaitu di bagian peleburan logam mempunyai potensi untuk terjadinya tekanan panas dan dampak kesehatan akibat pajanan panas pada pekerja. Penelitian ini berjudul "Faktor-faktor yang mempengaruhi peningkatan suhu tubuh dan denyut nadi pada pekerja yang terpajan panas (studi kasus di Departemen Cor Divisi Tampa dan Cor PT. Pindad (Persero) Bandung tahun 2003)".
Penelitian ini bertujuan untuk melihat apakah terjadi tekanan panas, peningkatan suhu tubuh dan denyut nadi pada pekerja yang terpajan panas khususnya di bagian peleburan. Di samping itu penelitian ini juga melihat keluhan yang bersifat subjektif yang dirasakan oleh pekerja yang terpajan oleh panas.
Faktor-faktor yang berhubungan dengan peningkatan suhu tubuh, denyut nadi, dan keluhan subjektif yang diteliti adalah tekanan panas yang diperoleh dari analisis hasil pengukuran temperatur lingkungan, beban kerja, dan pola kerja serta beberapa faktor yang berkaitan dengan individu yaitu umur, aklimatisasi, indeks massa tubuh, dan jenis pakaian kerja.
Penelitian ini menggunakan disain kuasi eksperimen untuk melihat fenomena sebab akibat antara faktor-faktor yang mempengaruhi peningkatan suhu tubuh dan denyut nadi yaitu tekanan panas, beban kerja, umur, aklimatisasi, indeks massa tubuh, dan jenis pakaian kerja sebagai penyebab dengan kejadian peningkatan suhu tubuh dan denyut nadi sebagai akibat.
Pengumpulan data dilakukan dengan mengukur temperatur lingkungan kerja, pengukuran kecepatan dan arah angin, pengukuran suhu tubuh dan denyut nadi pekerja sebelum dan sesudah bekerja di tempat panas, serta melakukan pengukuran berat badan dan tinggi badan untuk mendapatkan indeks massa tubuh (!MT). Untuk mendapatkan gambaran beban kerja dilakukan pengamatan terhadap aktivitas responden dan beban kerja dihitung berdasarkan estimasi kalori yang dikeluarkan. Sedangkan untuk mendapatkan informasi tentang keluhan subjektif digunakan kuesioner sebagai instrumen penelitian.
Dari hasil penelitian diketahui bahwa di lingkungan kerja terdapat 2 area yang mempunyai suhu yang tinggi yaitu di area tungku peleburan dan di area penuangan ke cetakan. Lingkungan kerja tidak dilengkapi dengan sistem ventilasi yang memadai serta kecepatan aliran udara di dalam ruangan atau tempat kerja sangat rendah yaitu hanya berkisar 0,0 -- 0,4 meter per detik. Sebagian besar responden mempunyai beban kerja yang berat dan indeks massa tubuh normal. Semua responden termasuk dalam kategori umur yang sama yaitu 30 tahun dan teraklimatisasi.
Setelah dilakukan analisis data, ternyata tidak terjadi pajanan panas yang melebihi nilai ambang batas. Namun dari hasil pengukuran suhu tubuh dan denyut nadi antara sebelum bekerja dan setelah bekerja di area yang terpajan panas, ditemukan 17,6% responden mengalami peningkatan suhu tubuh dan 41,2% mengalami peningkatan denyut nadi. Peningkatan suhu tubuh yang terjadi ternyata tidak melebihi batas suhu tubuh normal yaitu 38°C. Peningkatan suhu tubuh hanya terjadi pada pekerja yang mempunyai beban kerja yang berat. Sedangkan pada kejadian peningkatan denyut nadi, ternyata dari 41,2% yang mengalami peningkatan denyut nadi ternyata ada 2 responden yang denyut nadinya setelah bekerja di tempat panas melebihi 110 denyut per menit. Sedangkan hasil penelitian tentang respon subjektif responden terhadap pajanan panas, ternyata 63,6% responden merasa terganggu oleh pajanan panas di tempat kerja. Keluhan subjektif yang umumnya dirasakan oleh seluruh responden adalah merasa haus, kulit terasa panas, dan banyak berkeringat. Sedangkan yang sedikit dikeluhkan oleh pekerja adala keram pada otot tangan dan kaki.
Analisis hubungan antara faktor-faktor yang mempengaruhi peningkatan suhu tubuh dan denyut nadi pekerja ternyata tidak terlihat adanya hubungan. Hal ini disebabkan oleh beberapa hal, antara lain kondisi lingkungan yang memang tidak menimbulkan terjadinya tekanan panas pada pekerja, serta populasi pekerja yang kecil, sehingga dengan adanya replikasi pengukuran tidak memberikan variasi yang besar terhadap karakteristik individu.
Dari penelitian ini dapat disimpulkan bahwa dari hasil pengukuran temperatur lingkungan kerja diketahui bahwa indeks WBGT rata-rata lingkungan kerja belum melebihi nilai ambang batas yang diperbolehkan berdasarkan TLV-ACGIH karena pajanan yang terjadi dalam waktu yang singkat. Proses kerja yang ada ternyata memberikan perlindungan pada pekerja dan terhindar dari pajanan panas yang berlebihan sehingga hal ini harus tetap dipertahankan. Bagi peneliti lain yang ingin melihat faktor-faktor yang mempengaruhi peningkatan suhu tubuh dan denyut nadi pada pekerja yang terpajan panas, perlu mempertimbangkan adanya populasi kontrol. Sedangkan bagi institusi pemerintah perlu adanya upaya untuk mempertimbangkan standar tekanan panas yang sesuai dengan fisiologis dan kondisi lingkungan kerja di Indonesia.

Heat hazard at the workplace is a factor that can cause health nuisance and occupational disease on workers. PT Pindad, which one of its production process i.e. melting unit is carried out under high temperature, has a potential chance to lead heat stress and escort the workers' health as the effect of heat exposure. The theme of this research is 'Factors that Affect The Increasing of Body Core Temperature and Heart Rate on Workers Exposed by Heat (Case Study at Cor Department, Temp and Cor Division PT Pindad (Persero), Bandung 2003).
The objectives of this research are to discover heat stress condition, increasing of body core and heart rate on the workers exposed by heat at the melting unit. Furthermore, this research is also trying to observe subjective sighs suffered by the workers.
Factors related to the increasing of body core temperature, heart rate, and subjective sighs are heat stress obtained from analysis of the environment temperature measurement, workload, and work rest regimen, along with some individual factors such as age, acclimatization, body mass index, and clothing.
The research design is a quasi experiment to examine cause-effect phenomena between factors that affect the increasing of body core temperature and heart rate such as heat stress, workload, age, acclimatization, body mass index, and clothing as the causes and the increasing of the body core temperature and heart rate as the effects. Moreover, respondents' response about the subjective sighs as the impact of heat exposure during working is observed as well.
The data was collected by measuring the working environment temperature, the wind direction and velocity, the workers' body temperature and heart rate before and after activities in hot environment, and the workers' height and weight to gain body mass index. Workload was calculated by observing the workers' activities based on NIOSH estimation table. Questioners were spread out in order to attain information of the subjective sighs.
The result of the research discovers that there are two areas, which have high temperature: melting and pouring areas. Working environment has poor ventilation system and the air velocity in the workplace is quite low, only 0.0 -- 0.4 meter per second. Most of the respondents have workload, and normal body mass index. All respondents are in the similar age i.e. > 30 years old and acclimatized.
After accomplishing data analysis, heat stress doesn't exist. However, 17:6% respondents have increasing body core temperature, and 41.2% have increasing heart rate. The increasing of the body core temperature is not more than 38° C. It seems to happen to the workers who have heavy workload. Only 2 respondents of the 41.2% whose heart rate are above 110 beat per minute. On the research of the respondents' subjective response toward heat exposure, 63.6% respondents are disturbed. In general, all respondents whine about thirst, burning skin, and sweat. Lesser sighs are concerning on arm and feet muscles cramp.
The research also reveals that there is no connection between factors, which affect the increasing of body core temperature and the worker's heart rate such as heat stress, workload, age, acclimatization, body mass index, and clothing. Several things cause this condition, for instance environment condition that doesn't encourage heat stress on the workers, and small worker population. These causes do not provide an assorted variation on individual characteristics when replicate measurement done.
The result of the environment temperature measurement notifies that the average of the workplace WBGT index is not over than threshold limit value permitted by TLVACGIH since the exposure happens in short time. Working process provides protection for the workers so that they are avoided from over heat exposure. This condition indeed needs to be sustained. For other researchers interested in factors that affect the increasing of the body core temperature and heart rate on workers exposed by heat should put control population into consideration. In addition, Government institution should have efforts to appraise heat exposure standard that is suitable with physiologic and workplace condition in Indonesia.
"
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2003
T11369
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>