Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 93173 dokumen yang sesuai dengan query
cover
Jefri Andrian
"ABSTRACT
Data gravitasi yang diperoleh pada salah satu bagian dari wilayah Cekungan Sumatera Utara, telah digunakan untuk mengestimasi kedalaman multipel horizon dari batas muka densitas. Dengan mengaplikasikan metode Energy Spectral Analysis ndash; Multi Window Test ESA ndash; MWT, horizon tersebut diperoleh. Estimasi kedalaman dihitung dari analisa energi spektrum sebagai transformasi dari data gravitasi yang telah di-grid menjadi transformasi Fourier 2D Fast Fourier Transform. Analisa energi spektrum dilakukan pada sebuah titik uji dengan melakukan pe-window-an peta Complete Bouguer Anomaly CBA pada titik uji tersebut dengan ukuran window persegi yang bertambah secara konstan dengan pertambahan lebar 1 km dari ukuran window sebelumnya. Jarak antar titik uji adalah sekitar 2 km pada masing-masing lintasan pengukuran gravitasi. Kemudian diperoleh kedalaman plateau yang merepresentasikan batas-muka densitas dari hasil plot antara kedalaman benda anomali terhadap ukuran window. Pemetaan struktur patahan dilakukan dengan menggunakan metode Multi Scale ndash; Second Vertical Derivative MS ndash; SVD. Patahan diperoleh dengan mengaplikasikan derivatif vertikal orde dua SVD pada anomali gravitasi yang sudah dilakukan proses upward continuation UC. Kedalaman benda anomali yang berkorelasi dengan ketinggian UC diplot terhadap lokasi patahan yang direpresentasikan oleh nilai SVD nol. Sehingga diperoleh trend kemenerusan patahan dip. Hasil pemetaan horizon batas-muka densitas berkorelasi dengan batas-muka sedimentasi, yaitu basemen ekonomis sebagai Top Tampur Horizon 1, top dari beberapa batas muka sedimentasi lainnya Horizon 2-6 salah satunya adalah Top Belumai Horizon 2. Hasil pemetaan patahan diantaranya terdeteksi sebuah patahan besar berupa patahan naik dengan dip 4.9o ke arah Barat daya dan strike N152oE, yang menjadi border dari cekungan sebagai pemisah antara nilai anomali gravitasi tinggi dan rendah. Patahan besar ini memisahkan singkapan basemen Pra-Tersier dan platform cekungan di Barat daya dengan kompleks kemiringan cekungan deposenter cekungan di Timur laut.

ABSTRACT
Gravity data acquired over part of North Sumatera Basin, Indonesia, was used to estimate depth to multiple horizons of density interface. By applying the Energy Spectral Analysis ndash Multi Window Test ESA ndash MWT method, the horizons were mapped. The estimated depth was computed from Energy Spectral Analysis as the transformation of the gridded gravity data to 2D Fourier transform Fast Fourier Transform. The Energy Spectrum Analysis is performed at a test point by windowing the gridded Complete Bouguer Anomaly CBA at that test point with the square window size constantly increasing 1 km width from the previous window size. The distance between the test points is about 2 km on each of the gravity measurement lines. Plateau depth is then obtained which represents the density interfaces of the plot result between the depths of the anomaly to the window sizes. The fault mapping is done using Multi Scale Second Vertical Derivative MS SVD method. The fault is obtained by applying a second order vertical derivative SVD to gravity anomaly which has been done upward continuation UC. The depth of anomalous bodies correlated with the distance of UC is plotted against the fault location represented by the zero SVD value. So we get the trend of continuity of fault dip. The results of mapping of density interfaces correspond to sedimentary interfaces, those are the economic basement as Top Tampur Horizon 1, the top of several other sedimentary interfaces Horizon 2 6 one of them is Top Belumai Horizon 2. Fault mapping results were detected a major fault as a reverse fault with dip 4.9o towards the Southwest and strike N152oE, which became the border of the basin as a separator between the high and low gravity anomaly values. This major fault separates the Pre Tertiary basement outcrop and basin platforms in the Southwest with basin slope complex basin depocenter in the Northeast."
2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Syamil Fakhruddin Hibatulloh Arildan
"ABSTRAK
Data gravitasi yang diperoleh pada bagian selatan Yogyakarta, tepatnya daerah bantul kearah utara, telah digunakan untuk mengidentifikasi keberadaan serta kedalaman Sesar Kali Opak. Dengan mengaplikasikan metode Multi Scale Second Vertical Derivative(MS-SVD), lokasi patahan dan kemiringan (dip) dapat diidentifikasi. Data anomali gravitasi dalam bentuk Complete Bouguer Anomaly (CBA) dilakukan kontinuasi ke atas (upward continuation) beberapa kali, sehingga didapatkan bidang anomali gravitasi pada beberapa level kontinuasi. SVD dilakukan pada setiap bidang hasil kontinuasi sehingga didapatkan lokasi yang teridentifikasi sebagai patahan, yaitu saat nilai SVD nol. UC yang berkorelasi dengan kedalaman diplot dengan lokasi SVD nol, sehingga didapatkan bentuk, besar kemiringan, lokasi dan kedalaman dari setiap patahan. Sesar Kali Opak pada bagian Utara bergeser ke arah Timur dari peta geologi, dan berkorelasi dengan nilai peta anomali CBA data gravitasi. Sesar Kali Opak sebelah Utara memiliki arah strike N600E dan besar dip 74.50 arah Barat Laut, sedangkan sebelah Selatan memiliki arah strike N670E dan besar dip 650 arah Barat Laut dengan jenis patahan normal. Estimasi bentuk dan kedalaman horizon lokasi penelitian telah diidentifikasi dengan mengaplikasikan metode Energy Spectral Analysis-Multi Window Test (ESA-MWT). Bentuk dan lokasi horizon digunakan untuk mengonfirmasi keberadaan struktur patahan di bawah permukaan daerah penelitian. Dengan mengaplikasikan analisa energi spektrum yang telah di-grid menjadi transformasi Fourier 2D (Fast Fourier Transform) dari data gravitasi. Analisa energi spektrum dilakukan pada suatu titik uji, dengan melakukan per-window-an pada peta CBA secara konstan dengan ukuran window persegi yang bertambah lebar 2 km dari window sebelumnya. Jarak antara titik uji berkisar sekitar 3-5 km pada masing-masing lintasan yang memiliki zona interest. Hasil plot masing-masing window terhadap kedalaman memperlihatkan kedalaman masing-masing horizon. Dengan menggabungkan setiap titik uji, dan melakukan plot terhadap kedalaman, maka didapatkan bentuk dan kedalaman masing-masing horizon. Terdapat dua horizon pada daerah penelitian. Horizon pertama berada pada kedalaman berkisar 2-4 km, dan horizon kedua berada pada kedalaman berkisar 6-8 km. Bentuk dari horizon pertama di sekitar Sesar Kali Opak memberikan bentuk yang sesuai dengan hasil MS-SVD , sehingga mengonfirmasi adanya patahan di lokasi tersebut

ABSTRACT
Gravitation data which obtained from southern part of Yogyakarta, precisely in Bantul towards the northern, are already used to identify the existence and the depth of Kali Opak Fault or Opak River Fault. By applying Multi Scale Second Vertical Derivative (MS-SVD) method, the location fault and dip can be identified. The gravity anomaly data in the form of Complete Bouguer Anomaly (CBA) is carried out upward continuation several times, so that the gravity anomaly data is obtained at several levels of continuation. SVD is performed on each field resulting from the continuation so that the location identified as a fault is obtained, i.e. when the SVD value is zero. UC which correlates with depth is plotted with a zero SVD location, so that the shape, the dip size, location, and depth of each fault are obtained. The northern part of Opak River Fault shifts eastward from geological map, and correlates with the CBA anomaly map of gravity data. The northern part of Opak River Fault has a N600E strike direction and a large 74.50 dip in the northwest direction meanwhile, the southern part has a N670E strike direction and a large 650 northwest dip with normal fault type. The estimation of shape and depth of the research location horizon has been identified by applying Energy Spectral Analysis-Multi Window Test (ESA-MWT) method. The shape and horizon location is used to confirm the existence of a fault structure beneath the surface of the study area. By applying grid-spectrum energy analysis to transform into Fourier 2D from gravity data. Energy spectrum analysis is carried out at a test point, by constantly windowing the CBA map with a square window size that increases in width 2 km from the previous window. The distance between the test points ranges from 3-5 km to each track that has an interest zone. The results of the plots of each window towards the depth show the depth of each horizon. By combining each test point, and plotting the depth, the shape and depth of each horizon are obtained. There are two horizons in the study area. The first horizon is at depths ranging from 2-4 km, and the second horizon is at depths ranging from 6-8 km. The shape of the first horizon around the Opak River Fault gives a shape that matches the MS-SVD results, thus confirming the appearance of fault at that location."
2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Renaldi Antoni Hamonangan
"ABSTRAK
Penelitian yang dilakukan di Kota Depok ini bertujuan untuk mengetahui kedalaman basement, sebagai parameter yang perlu dipertimbangkan dalam penentuan lokasi gedung. Kedalaman ruang bawah tanah akan memiliki peran penting dalam menjaga kekuatan bangunan di masa depan. Metode gravitasi sebagai metodologi geofisika digunakan dalam pemetaan struktur permukaan bawah. Karena parameter yang diukur dengan metode gravitasi memiliki laju gravitasi yang disebabkan oleh kerapatan batu yang bervariasi pada permukaan yang lebih rendah. Dengan menggunakan metode Parasnis diketahui bahwa rata-rata berat jenis batu di Kota Depok adalah 1,73 gr cc. Analisis Spektrum Energi ndash Multi Window Test Metode ESA MWT dengan windowing test point menggunakan Complete Bouger Anomaly CBA digunakan untuk mengetahui kedalaman interface pada setiap titik yang diuji. Dan juga dilakukan pemisahan antara anomali regional dan anomali residual dengan transformasi fourier pada software Oasis Montaj. Pemisahan antara anomali regional dan anomali residual dilakukan dengan menggunakan low pass filter. Sedangkan band pass filter digunakan untuk mengurangi noise pada anomali residual. Struktur fraktur dapat diidentifikasi melalui peta anomali residual dan juga dengan menggunakan metode Multi Scale ndash Second Vertical Derivate MS SVD, yang hasilnya memiliki korelasi satu sama lain. Hasil identifikasi kedalaman basement dan struktur rekahan dibuat dalam bentuk peta permukaan bawah, dan juga digunakan untuk memperjelas gambaran.

ABSTRACT
The research which was done in City of Depok is aimed to determine the deepness of basement, as a parameter that needed to take into a consideration in determining the building location. The deepness of basement will have its critical role in keeping the building strong in the future. The gravity method as a geophysics methodology was used in mapping the structure of lower surface. Because of parameter measured by gravity method has a gravity rate which is caused by varies of stone density of lower surface. By using the Parasnis method, it is known that the average of stone density in city of Depok is 1.73 gr cc. Energy Spectrum Analysis ndash Multi Window Test ESA MWT method by windowing test point using Complete Bouger Anomaly CBA is used to know the depth interface in each tested point. And it is also done a separation between regional anomaly and residual anomaly by transformation fourier at software of Oasis Montaj. Separation between regional anomaly and residual anomaly is done by using low pass filter. Meanwhile, it is used band pass filter to reduce noisy in residual anomaly. Fractur structure could be identified through map of residual anomaly and by using method of Multi Scale ndash Second Vertical Derivate MS SVD as well, in which its result has a correlation one to another. Identification result on the deepness of basement and fractur structure is made in the shape of map of lower surface, and it is also used to make clearer picture."
2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Michael Christanto
"ABSTRAK
Data gravitasi pada daerah Slawi, Jawa Tengah telah digunakan untuk menentukan kedalaman tiap-tiap horizon dari batas muka densitas. Metode Energy Spectral Analysis ndash; Multi Window Test ESA-MWT berbasis transfomasi fourier merupakan metode yang diterapkan dalam memperoleh nilai kedalaman tersebut. Kedalaman horizon diperoleh melalui hasil analisis energi spektrum berdasarkan transformasi fourier yang telah dilakukan pada data gravitasi yang sudah di-grid. Diawali dengan proses multi window test pada nilai Complete Bouguer Anomaly yang memiliki densitas 2.34 gr/cc yang sudah dalam bentuk grid untuk masing-masing test point dengan tujuan sebagai pemisah dan pembatas dalam melakukan estimasi kedalamannya. Besaran window yang digunakan untuk setiap titik uji dimulai dengan kelipatan 500m 500m, begitu seterunya sampai window ke-15. Jarak antar titik uji adalah sebesar 1000m pada masing-masing lintasan melalui pengukuran gravitasi pada daerah penelitian. Didapatkan kedalaman dari hasil interpretasi analisa energi spektrum untuk tiap-tiap window yang dikorelasikan dengan titik uji dalam satu lintasan. Metode Multi-Scale Horizontal Derivative of The Vertical Derivative MS-HDVD telah diterapkan untuk menentukan dan memetakan stuktur patahan. Dikarenakan daerah penelitian tidak termasuk dalam daerah dengan patahan yang kompleks, maka struktur patahan diasumsikan sebagai border intrusi yang muncul pada Miosen Akhir. Puncak atau top intrusi berada pada kedalaman 620m mdash;755m dibawah permukaan bumi berdasarkan metode ESA-MWT.

ABSTRACT<>br>
The gravity data obtained in Slawi, Central java has been used to determine the depth of each horizon from the density boundary. The Fourier Transformation based Energy Spectral Analysis Multi Window Test ESA MWT is the applied method in obtaining the depth value. The depth of horizon is obtained through the spectrum energy analysis based on the Fourier Transformation that have been performed on the grid gravity data. It began with multi window test process on the value of Complete Bouguer Anomaly which has density 2.340 gr cc, already in the form of grid for each test point, and it serves as separator and limiter in estimating the depth. The size of the window used for each test point began with multiplication of 500m 500m until it gets to the 15th window. The distance between the test point is 1000m on each passage through the gravity measurement in Slawi, Central Java. The depth is obtained from the interpretation results of spectrum energy analysis for each window which is correlated with the test point in a single path. The Multi Scale Horizontal Derivative of the Vertical Derivative MS HDVD methods have been applied to determine and to map the fault structures. Since the area of study is not in the area of complex fractures, the fracture structure is assumed to be the border of intrusion that appeared in the Late Miocene. The peak or top of the intrusion is at 620m 755m depth below the earth rsquo s surface based on the ESA MWT method."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Iham Muhammad Al Ayubi
"Lapangan "IM" merupakan salah satu lapangan eksplorasi minyak dan gas bumi yang berada di Cekungan Sumatera Utara. Telah teridentifikasi sebelumnya bahwa pada lapangan ini ditemukan hidrokarbon berupa gas condensate. Penelitian ini bertujuan untuk mengarakterisasi reservoir dalam hal persebaran litologi dan kandungan fluidanya. Penelitian mencakup target reservoir karbonat yang berada pada Middle Miocene Malacca Limestone. Data yang digunakan dalam penelitian ini, yaitu data seismik 3D dan dua data sumur. Metode inversi simultan diterapkan untuk mengolah data agar tujuan penelitian dapat tercapai. Metode inversi simultan menghasilkan model Impedansi P (Zp), Impedansi S (Zs), dan Densitas. Didapatkan hasil pada reservoir gas nilai impedansi P (Zp) sekitar 16542-18917 (ft/s*g/cc) dan impedansi S (Zs) sekitar 8375 (ft/s*g/cc) sedangkan pada reservoir air nilai impedansi P (Zp) sebesar 21292-23667 (ft/s*g/cc) dan impedansi S (Zs) sekitar 18500-20525 (ft/s*g/cc). Hasil tersebut kemudian ditransformasi menjadi parameter Lame. Parameter Lame merupakan parameter elastik yang terdiri dari Lambda-Rho dan Mu-Rho. Masing-masing parameter tersebut menjelaskan mengenai sifat inkompressibilitas fluida dan kekakuan batuan. Hasil penelitian menunjukkan persebaran reservoir yang memiliki arah orientasi Barat Laut-Tenggara.

The "IM" field is an oil and gas exploration field located in the North Sumatra Basin. It was previously identified that in this field hydrocarbons were found in the form of gas condensate. This study aims to characterize the reservoir in terms of lithological distribution and fluid content. The research includes carbonate reservoir targets located in Middle Miocene Malacca Limestone. The data used in this study are 3D seismic data and two well data. Simultaneous inversion method is applied to process data so that research objectives can be achieved. The simultaneous inversion method produces P-Impedance (Zp), S-Impedance (Zs), and Density models. The results show that in the gas reservoir the P (Zp) impedance value is around 16542-18917 (ft/s*g/cc) and the S (Zs) impedance is around 8375 (ft/s*g/cc) while in the water reservoir the P impedance value (Zp ) of 21292-23667 (ft/s*g/cc) and the impedance S (Zs) is around 18500-20525 (ft/s*g/cc). The results are then transformed into the Lame parameter. The Lame parameter is an elastic parameter consisting of Lambda-Rho and Mu-Rho. Each of these parameters explains the fluid incompressibility and rock stiffness. The results showed that the reservoir distribution had an North West-South East orientation."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rizki Agung Rahmat Alfarisi
"ABSTRAK
Penelitian yang dilakukan di cekungan Sumatera Utara bertujuan untuk mengetahhui bagaimana kondisi batuan sedimen pra-tersier di bawah permukaan. Hal ini dilakukan karena adanya isu dimana batuan sedimen yang telah berumur pra-tersier diisukan belum semua nya termertamorfkan. Hal ini menjadi menarik karena ada kemungkinan cadangan minyak dan gas bumi yang tersimpan pada batuan sedimen pra-tersier. Metode gravitasi merupakan metode geofisika yang digunakan untuk memetakan struktur bawah permukaan. Karena nilai yang terukur oleh metode ini adalah nilai anomali gravitasi dari batuan yang ada di bawah permukaan. Metode inversi menggunakan persamaan Fast Fourier Transform pada aplikasi Matlab yang mana bertujuan untuk dapat membuat pemodelan dari bawah permukaan. Data masukan yang digunakan pada pemograman Matlab berupa nilai data anomali graitasi, jumlah kolom dan baris atau koordinat titik pengambilan data, nilai kedalaman rata-rata batuan atau lapisan targer, nilai kontras densitas batuan dan nilai kriteria konvergensi. Hasil pemograman menampilkan horizon bawah permukaan pada nilai kedalaman dan horizon hasil perhitungan nilai kedalaman dengan nilai anomali gravitasi. Proses inversi dilakukan pada saat melakukan proses iterasi dan akan berhenti jika nilai kesalahan RMS yang didapat dari proses iterasi telah mendekati nilai yang ditentukan sebagai kriteria konvergensi atau sampai iterasi maksimum tercapai. Hasil iterasi berhenti saat nilai RMS error sekitar 0.00016879 % pada iterasi kedua. Horizon yang terbentuk sesuai dengan keadaan geologi yang terbentuk di bawah permukaan dimana batuan sedimen pra-tersier berada di kedalaman rata-rata 5.8 km di bawah permukaan dengan ketebalan dari 5 km hingga 6 km.

ABSTRACT
The research conducted in the North Sumatra basin aims to find out how the conditions of pre-tertiary sedimentary rocks below the surface. This is done because there are issues where sedimentary rocks that have been pre-tertiary are not yet included. This is interesting because it is possible that oil and gas reserves are stored in pre-tertiary sedimentary rocks. The gravity method is a geophysical method used to map the subsurface structure. Because the value measured by this method is the value of the gravitational anomaly of the rock below the surface. The inversion method uses the Fast Fourier Transform equation in the Matlab application, which aims to be able to make modeling from the subsurface. Input data used in Matlab programming is in the form of gravity anomalous data values, column number and row or coordinates of data retrieval points, average rock depth or targer layer values, rock density contrast values and convergence criterion values. The programming results show the subsurface horizon at the depth and horizon values resulting from the calculation of the depth value with the value of gravity anomalies. The inversion process is carried out when carrying out the iteration process and will stop if the RMS error value obtained from the iteration process has approached the value specified as the convergence criterion or until the maximum iteration is reached. The iteration results stop when the RMS error value is around 0.00016879% in the second iteration. Horizon is formed in accordance with the geological conditions formed below the surface where pre-tertiary sedimentary rocks are at an average depth of 5.8 km below the surface with a thickness of 5 km to 6 km.
"
2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Adhanystika Dica Dwiyanti
"Lapangan Talavera seluas 230km2 adalah lapangan migas yang berada di Cekungan Sumatera Utara yang merupakan salah satu cekungan mature di Indonesia. Lapangan ini diduga memiliki fitur stratigrafi berupa chanel dan delta dengan perlapisan batu pasir yang tipis sehingga tidak dapat terdeteksi dalam peta seismik konvensional.
Dalam penelitian ini dipilih atribut seismik dekomposisi spektral berbasis Continuous Wavelet Transform (CWT) yang dapat mengekstrak informasi frekuensi dari peta seismik fungsi waktu menjadi peta fungsi waktu-frekuensi. Hasilnya diharapkan akan dapat digunakan untuk mendelineasi fitur stratigrafi dan mengetahui penyebaran lapisan batu pasir (batuan reservoar). Sementara atribut RMS amplitude digunakan untuk melihat distribusi kandidat reservoar sekaligus menjadi data pembanding dan pendukung informasi yang didapat dari atribut dekomposisi spektral. Pada akhirnya, hasil penellitian ini akan sangat berguna bagi perhitungan cadangan rinci, yang akan sangat tergantung pada geometri dan kualitas reservoar. Selain itu, juga akan berguna bagi perencanaan produksi pada fase eksploitasi.
Dari hasil penelitian ini didapatkan tiga fasies reservoar dan hubungan korelasi yang kuat antara metode dekomposisi spektral dengan ekstraksi atribut RMS amplitude. Dengan atribut RMS amplitude dapat dilihat distribusi reservoar berdasarkan tingginya nilai amplitudo. Sementara untuk delineasi batu pasir secara lebih rinci diperoleh dari hasil analisa dekomposisi spektral.

Talavera is a 230km2 area of the oil and gas field located in the North Sumatra Basin, which is one mature basins in Indonesia. This field has allegedly stratigraphic features such as channels and delta sandstone with thin bedding that can not be detected in conventional seismic map.
In this study, seismic attribute spectral decomposition based on Continuous Wavelet Transform ( CWT ) is selected to extract the frequency information from the seismic map time domain becomes a seismic map time - frequency domain. The results are expected to be used to delineate the stratigraphic and geographic distribution of feature layers of sandstone (reservoir rock) . While the RMS amplitude attribute is used to look at the distribution of the reservoir as well as a candidate benchmark data and supporting information obtained from spectral decomposition attributes. In the end, this study results will be useful for a detailed calculation of reserves, which will depend on the geometry and quality of the reservoir. In addition, it will also be useful for the planning of production in the exploitation phase.
From the results of this study, the three reservoir facies and a strong correlation between the spectral decomposition method with RMS amplitude attribute extraction are detected. With RMS amplitude attribute can be seen by the high value of reservoir distribution amplitude . As for the delineation of sandstone in more detail the results obtained from the spectral decomposition analysis.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2014
S56757
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nur Najmiah Tullailah
"ABSTRAK
Area X, Cekungan Sumatera Utara merupakan target eksplorasi hidrokarbon dengan mengejar target lapisan dalam sebagai prospek baru. Metode seismik telah dilakukan namun hasilnya masih memiliki ambuigitas dalam menggambarkan bentuk bawah permukaan khususnya lapisan dalam di antaranya keberadaan basement sebagai dasar dari lapisan sedimen di atasnya yang menjadi target eksplorasi. Metode Gaya Berat dan Magnetotellurik dilakukan untuk mengkonfirmasi keberadaan basement yang menjadi dasar intrepretasi pada seismic. Metode Magnetotellurik dilakukan untuk menunjukkan distribusi nilai resistivitas litologi di bawah permukaan, dalam hal ini nilai resistivitas antara basement dan formasi lain di sekitarnya. Berdasarkan hasil inversi 2D dan 3D MT pada lintasan 4 dan 6 menunjukkan adanya kontras resistivitas yaitu zona resistivitas tinggi (Rho=102 - 103 ohm.m) pada bagian SW dari lintasan dan pada kedalaman 6000 meter kebawah yang mengindikasikan lapisan formasi yang lebih tua dan dalam hal ini juga diindikasikan sebagai basement , sedangkan di sebelah NE dari lintasan tersebut tampak litologi yang lebih konduktif (Rho= 1-101 ohm.m) dan berada
bagian atas dari lintasan yang menunjukkan lapisan formasi yang lebih mudah
diindikasikan sebagai lapisan sedimen. Metode Gaya Berat akan menunjukkan distribusi nilai densitas yang diperoleh dari hasil gravity forward modelling. Hasil dari metode gaya berat menunjukkan adanya kontras densitas di bagian sisi kiri dan kanan dari lapangan, dimana berdasarkan peta regional terdapat anomali nilai rendah berkisar 26-42 mGal dan anomaly tinggi berkisar 48-66 mGal. Hasil pemodelan gravity 2D pada lintasan 4 dan 6 menunjukkan keberadaan basement pra-tersier berada pada kedalaman 6000 m kebawah dengan beberapa formasi diatasnya yang terdiri dari formasi pratersier dan formasi yang terbentuk pada tersier. Formasi pada lapisan dalam yang
berpotensi sebagai reservoar yang baik adalah Formasi Tampur yang merupakan batu gamping serta Formasi Parapat yang merupakan batu pasir.

ABSTRACT
Area X, North Sumatra Basin is a target for hydrocarbon exploration by pursuing the inner layer target as a new prospect. Seismic methods have been carried out but the results still have ambiguity in describing subsurface forms, especially the inner layers, including the presence of basements as the base of the sediment layer above which is the target of exploration. The Gravity and Magnetotelluric methods are carried out to confirm the existence of the basement which is the basis of the interpretation of seismic. The Magnetotelluric method is performed to show the distribution of lithological
resistivity values below the surface, in this case the resistivity value between the basement and other formations around it. Based on the results of 2 D and 3D MT inversion on tracks 4 and 6, the contrast resistivity is high resistivity zone (Rho =Rho=102 - 103 ohm.m) on the SW portion of the track and at a depth of 6000 meters down which indicates the older formation layer and in this case also it is indicated as a basement, while in the NE from the track it appears more conductive lithology (Rho= 1-101 ohm.m) and is located at the top of the track which shows the formation layer which is more easily indicated as a sediment layer. The gravity method will show the distribution of density values obtained from the gravity forward modeling. The results of the gravity method show that there is contrast density on the left and right sides of the
field, where based on regional maps there are low value anomalies ranging from 26-42 mGal and high anomalies ranging from 48-66 mGal. The gravity 2D modeling results on tracks 4 and 6 show the existence of a pre-tertiary basement at a depth of 6000 m below with some formations above which consists of pre-tertiary formations and tertiary formation. Formations in the inner layer which have the potential as a good reservoir are the Tampur Formation which are limestone and Parapat Formation."
2019
T51936
UI - Tesis Membership  Universitas Indonesia Library
cover
Indra Gunawan
"ABSTRAK:
Dalam eksplorasi minyak dan gas bumi, penentuan lokasi keberadaan cekungan (basin) sangat penting untuk diketahui. Hal ini dikarenakan cekungan (basin) berkaitan erat dengan lingkungan pembentukan batuan induk (source rock). Telah dilakukan pengukuran survei gayaberat pada daerah cekungan Sumatera Selatan. Tujuan dilakukannya pengukuran ini adalah untuk mengetahui daerah-daerah yang diduga merupakan cekungan (basin) sebagai tempat pembentukan source rock. Pada nilai anomali Bouguer yang didapatkan dari hasil pengukuran selanjutnya dilakukan analisa spektrum untuk membantu mendapatkan model basement cekungan. Pada analisa lebih lanjut, dilakukan pemisahan anomali regional dan residual menggunakan metode Moving Average dan metode Polinomial Trend Surface Analysis untuk mengetahui daerah zona cekungan. Analisa First Derivative dilakukan untuk mengetahui daerah zona struktur patahan pada cekungan. Pada proses pemodelan 2D Forward Modelling, digunakan data sumur, hasil spektrum analisis berupa model kedalaman, peta geologi dan kurva FHD sebagai acuan dalam pemodelan. Hasil dari pemodelan 2D Forward Modelling menunjukkan adanya cekungan dengan kedalaman basement berkisar 2000 m sampai 3000 m. Interpretasi terpadu dari metode pengolahan data gayaberat yang dilakukan didapatkan keberadaan cekungan yang memanjang dari arah Baratlaut ke Tenggara-Selatan.

ABSTRACT:
In oil and gas exploration, determining the location of the basin is very important to be known. It is because the basin is closely related to the formation of the host rock environment (source rock). Geophysical survey using gravity method has been on the South Sumatra basin area. The purpose of this measurement is to determine the areas that are considered basin as the source rock formation. On the value Bouguer anomaly obtained from the results of measurements of the spectral analysis is performed to help get the model basin basement. On further analysis, the separation of regional and residual anomalies using the Moving Average method and Polynomial Trend Surface Analysis method to determine the zone of the basin area. First Derivative analysis was conducted to determine the structure of the fault zone area in the basin. In the modeling process 2D Forward Modeling, used well data, the results of spectral analysis of a model of depth, geological maps and FHD curve as a reference in the modeling. Results of Forward Modelling 2D modeling shows basin with depths ranging from 2000 m to the basement of 3000 m. Integrated interpretation of gravity data processing method conducted found the existence of the basin that extends from the North West to South - East."
Universitas Indonesia, 2014
S57165
UI - Skripsi Membership  Universitas Indonesia Library
cover
Iven Ganesja
"ABSTRAK
Cekungan Sumatera Selatan merupakan salah satu Cekungan busur belakang (back-arc basin) yang terbentuk akibat proses subduksi antara lempeng Indo Australia dengan lempeng Eurasia pada Jaman Pra Tersier hingga Tersier awal (Sarjono dan Sardjito,1989). Formasi AirBenakat yang terdapat pada Cekungan Sumatera Selatan telah terbukti menghasilkan hidrokarbon dan telah dieksplorasi sejak tahun 1979. Target pada Top M, Top N dan Top O merupakan zona prediksi dengan ketebalan 0.69 meter hingga 22.3 meter. Berdasarkan data produksi zona-zona tersebut terbukti terdapat hidrokarbon. Analisa petrofisika dan evaluasi formasi merupakan tahap awal untuk mengkarakterisasi reservoar dengan menganalisa sifat batuan seperti porositas, kandungan lempung, permeabilitas, dan saturasi air. Metode multiatribut seismik merupakan salah satu metode statistika menggunakan lebih dari satu atribut untuk memprediksi beberapa properti fisik dari bumi. Pada analisis ini dicari hubungan antara log dengan data seismik pada lokasi sumur dan menggunakan hubungan tersebut untuk mempredikasi atau mengestimasi volume dari properti log pada semua lokasi pada volum seismik. Inversi sparse-spike digunakan sebagai external attribute, metode neural network digunakan untuk meningkatkan korelasi antara aktual dan log prediksi. Berdasarkan hasil petrofisika porositas pada zona target berkisar 9.6-26% dan reservoar yang berpotensi terdapat gas memiliki saturasi air sebesar 8.9%-39.7, dan reservoar yang berpotensi terdapat oil memiliki saturasi sebesar 40-43%,dengan kandungan lempung sekitar 10.7%-26.9%.

ABSTRACT
South Sumatera Basin is a back-arc basin that was formed by subduction process between Indo-Autralia Plate and Eurasia Plate in Pre-Tersier mass until Early Tersier mass (Sarjono and Sarjito,1989). AirBenakat formation where is located in South Sumatera Basin has been proven that it has produced and it has been producted since 1979. Target zones at Top M, Top N, Top O are prediction zone that have been proven as reservoir zone by production data. Target zones have thickness between 0.69 meter until 22.3 meter. Petrophysical analysis and evaluation formation is first step to characterize reservoir with analyzing rock properties such as porosity, clay volume, permeability, and saturation of water. Multi-attributes seismik is one statistical method that uses more than one attribute to predic earth?s physical properties. In this analysis, we find the the correlation between log data with seismic data in well location, and use this corelation to predict or estimate volume of log property in all seismic volume. Sparse-spike inversion is used as external attribute, neural network method is used to increase corellation between actual and predict log. Based on petrophyscal analysis result, target zones have porosity values 9.6-26% and reservoir that is potential for being gas reservoir have saturation of water values 8.9-39.7% , reservoir that is potential for being oil resevoir have saturation of water values 40-43%, with volume clay values 10.7-26.9%
"
Universitas Indonesia, 2014
S57938
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>