Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 165283 dokumen yang sesuai dengan query
cover
Nathania Hartono
"Latar Belakang: Rapid Maxillary Expander RME yang sering digunakan dalam mengoreksi defisiensi maksila secara transversal memiliki beberapa keterbatasan, seperti usia dan efek samping yang secara klinis kurang menguntungkan. Maxillary Skeletal Expander MSE merupakan pengembangan RME yang dikombinasikan dengan miniscrew. Penelitian ini bertujuan untuk menganalisis perbedaan distribusi stress akibat penggunaan RME dan MSE di Region of Interest ROI kraniomaksila, yaitu molar satu M1 , alveolar palatal di regio M1, sutura palatina, sutura zigomatik, miniscrew, dan palatum di sekitar lokasi insersi miniscrew. Metode: Tengkorak kering manusia dipindai dengan Cone ndash;Beam Computed Tomography untuk membuat model tiga dimensi 3D kraniomaksila. Analisis data dilakukan secara visual dan numerik. Hasil: Gambaran distribusi stress di kelompok RME berada di palatal mahkota M1, mesial alveolar palatal, dan korteks inferior sutura palatina. Gambaran distribusi stress di kelompok MSE berada di cusp distopalatal M1, palatal alveolar palatal, dan korteks inferior dan superior sutura palatina. Gambaran distribusi stress di sutura zigomatik pada kedua kelompok terkonsentrasi di sutura zigomatikotemporal, sedangkan pada miniscrew dan area sekelilingnya terkonsentrasi pada miniscrew anterior dan area palatal tulang di sekeliling miniscrew anterior. Kesimpulan: Terdapat perbedaan bermakna distribusi stress pada ROI M1, tulang alveolar palatal M1, sutura palatina, dan sutura zigomatik di antara kelompok model kraniomaksila 3D RME dan MSE.

Background Transversal maxillary deficiency corrected with Rapid Maxillary Expander RME may result with some unfavorable side effects and limitations. Maxillary Skeletal Expander MSE , combined with miniscrews, was developed to overcome these drawbacks. This research was conducted to analyze the differences of stress distribution of maxillary expansion using RME and MSE in the Region of Interests ROIs first molars M1 , palatal alveolar bones of M1, palatine sutures, zygomatic sutures, miniscrews and their surrounding bones. Methods A dry skull was scanned using Cone Beam Computed Tomography, and rendered into a three dimensional 3D model of craniomaxillary structure. The data analysis was done visually and numerically. Result The stress distributions in RME group are located in palatal side of M1, mesial side of palatal alveolar of M1, and inferior cortex of palatine sutures. The stress distributions in MSE group are located in distopalatal cusp of M1, palatal side of palatal alveolar of M1, and inferior and superior cortex of palatine sutures. The stress distributions in zygomatic sutures on both groups are concentrated in zygomaticotemporal sutures, whereas in the miniscrews, the stress is concentrated on anterior miniscrews and palatal side of surrounding bones. Conclusion There are significant differences of stress distribution of maxillary expansion measured in the ROIs in craniomaxillary 3D model using RME and MSE."
Depok: Fakultas Kedokteran Gigi Universitas Indonesia, 2017
SP-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Maulina Rachmasari
"ABSTRAK
Latar Belakang:Teknik conventional two flap palatoplasty akan menimbulkan defek lateral tanpa adanya pelindung periosteum. Defek lateral yang terbuka ini akan menyebabkan rentannya terkena kontaminasi dan infeksi. Hal inilah yang akan menimbulkan kontraksi luka, pembentukan skar dan mengganggu pertumbuhan maxilla.Tahun 2011, terdapat studi mengenai teknik ldquo;The Non Denuded Palatoplasty rdquo;. Teknik ini meninggalkan sebagian periosteum yang diharapkan dapat mempercepat proses epitelisasi pada defek lateral. Epitelisasi yang lebih cepat diharapkan mengurangi terjadinya kontraksi luka dan kedepannya dapat tercapai pertumbuhan maksila yang baik.Metode:Merupakan studi kasus kontrol yang terdiri atas 2 grup membandingkan pertumbuhan maksila pasien dengan celah bibir dan langit-langit unilateral komplit yang dikerjakan dengan teknik conventional ldquo;Two Flap Palatoplasty rdquo; dan teknik ldquo;The Non Denuded Palatoplasty rdquo;. Hasil pengukuran cephalometri dicatat serta dibuat cetakan gigi untuk tiap pasien kemudian dikategorisasi menggunakan metode GOSLON YARDSTICK. Data yang diperoleh dianalisis dengan SPSS versi 20.Hasil:Terdapat 4 pasien di kelompok ldquo;The Non Denuded Palatoplasty rdquo; dan 10 pasien pada teknik conventional ldquo;Two Flap Palatoplasty rdquo;. Hasil pengukuran cephalometri SNA, SNB dan ANB menunjukkan bahwa kedua grup tersebut masuk dalam golongan maloklusi tipe III defisiensi maksila . Sementara hasil GOSLON Yardstick memperlihatkan GOSLON tipe III sebagai kelompok yang sering ditemukan bagi kedua grup dengan reliabilitas inter-rater baik p=0.839 . Pada penelitian ini tidak ditemukan korelasi antara variabel cephalometri dengan skor GOSLON.Kesimpulan:Hasil studi kami menunjukkan bahwa teknik modifikasi ldquo;The Non Denuded Palatoplasty rdquo; tidak berhubungan secara signifikan terhadap pertumbuhan maksila. Namun penelitian ini memiliki beberapa keterbatasan, yaitu ukuran sampel yang sedikit karena faktor keluarga, sosial dan faktor lainnya yang berada di luar kendali tim peneliti. Selain itu usia pasien yang dievaluasi ialah 7-9 tahun, dimana hasil ini bukan merupakan hasil akhir. Kata Kunci: Evaluasi pertumbuhan maksila, cephalometri, GOSLON YARDSTICK, Two Flap Palatoplasty

ABSTRACT
Background Conventional Two Flap Palatoplasty technique will made lateral defects without any periosteal coverage. These denuded lateral defects are prone to contamination and infection. These will result in wound contraction, scar formation and maxillary growth impairment.In 2011, we studied ldquo The Non Denuded Palatoplasty rdquo technique. This technique precipitated the epithelialization process of the lateral defects. Faster epithelialization is expected to decrease wound contraction and in the long run will result in good maxillary growth.Methods This is a case control study to compare the maxillary growth of 2 groups consists of unilateral cleft lip and palate patients repaired with ldquo The Non Denuded Palatoplasty rdquo technique and Conventional Two Flap Palatoplasty. The outcome will be evaluated from cephalometry and the dental cast for each patient areevaluated using GOSLON YARDSTICK method. Data will be analyzed using SPSS version 20.Results A total of 4 patients in The Non Denuded Palatoplasty group and 10 in the Conventional Two Flap Palatoplasty. The cephalometric SNA, SNB and ANB point showed Class III skeletal jaw relationship or deficient maxilla. While the GOSLON yardstick type III are the frequent GOSLON on both group with good inter ratter reliability p 0.839 based on Mann Whitney test. In these study there were no correlation between cephalometric variables with GOSLON score.Conclusion Our results showed that modification The Non Denuded Palatoplasty technique made no statistically significant difference to the maxillary growth. However this study has several limitations, which are the sample size was small due to family, social and other factors that are beyond the control of the investigating team. Also the age of evaluation 7 9 years , means that the result is not the final outcome. "
2017
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Rizky Putri Arfianti
"ABSTRAK
Bentuk oval pada sepertiga apikal saluran akar gigi premolar dua dan molar satu rahang atas serta molar satu rahang bawah seringkali tidak dapat terpreparasi dan dapat menyebabkan kegagalan. Tujuan: Mengetahui prevalensi variasi penampang melintang sepertiga apikal saluran akar gigi premolar dua dan molar satu rahang atas serta molar satu rahang bawah. Metode: Penelitian ini menggunakan 80 sampel gigi, di-scan menggunakan micro-CT Bruker SkyScan 1173. Masing-masing sepertiga apikal saluran akar dipotong dengan perangkat lunak DataViewer. Rasio diameter maksimum dan minimum dihitung dengan perangkat lunak Fiji ImageJ dan dikategorikan: bulat, oval, long oval, flat. Hasil: Prevalensi penampang melintang saluran akar premolar dua rahang atas, oval 66,7 , long oval 24,6 , flat 7 , bulat 1,7 . Molar satu rahang atas akar mesiobukal, oval 68,2 , long oval 22,7 , flat 9,1 ; distobukal, oval 94,1 , long oval 5,9 ; palatal oval 100 . Molar satu rahang bawah akar mesiobukal, long oval 47,4 , oval 36,8 , dan flat 15,8 ; mesiolingual oval 100 ; dan distal, oval 68,4 , long oval 21,1 , flat 10,5 . Kesimpulan: Penampang melintang oval pada sepertiga apikal saluran akar gigi premolar dua dan molar satu rahang atas serta molar satu rahang bawah ditemukan paling banyak, kecuali pada akar mesiobukal gigi molar satu rahang bawah ditemukan long oval 47,4 .

ABSTRACT
Oval shaped in apical one third maxillary second premolars, maxillary first molars, and mandibular first molars often can rsquo t be cleaned and shaped, and could cause failure in the process. Objective To know the prevalence variation of apical one third cross section in root canals of maxillary second premolars, maxillary first molars, and mandibular first molars. Methods This research used 80 tooth samples, were scanned using micro CT Bruker SkyScan 1173. Each of apical one third root canal were sectioned using DataViewer software. Maximum and minimum diameter ratio was calculated using the Fiji ImageJ software and categorized round, oval, long oval, and flat. Results Prevalence of apical one third root canal cross section shape in maxillary second premolar, oval 66,7 , long oval 24,6 , flat 7 , round 1,7 . Maxillary first molar mesiobuccal root, oval 68,2 , long oval 22,7 , flat 9,1 distobuccal, oval 94,1 , long oval 5,9 and palatal oval 100 . Mandibular first molar mesiobuccal root, long oval 47,4 , oval 36,8 , flat 15,8 mesiolingual oval 100 and distal, oval 68,4 , long oval 21,1 , flat 10,5 . Conclusion Oval shape in cross section of apical one third in root canals of maxillary second premolars, maxillary first molars, and mandibular first molars were most found, except in mesiobuccal root in mandibular first molar was found long oval 47,4 . "
2017
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ricky Sanjaya
"Latar Belakang: Celah bibir dan langit-langit merupakan kelainan bawaan yang umum ditemukan yang terjadi saat perkembangan janin karena kegagalan proses pertumbuhan organ wajah. Defisiensi pertumbuhan maksila secara tiga dimensi (3D) sering ditemukan pada penderita celah bibir dan langit-langit terutama pada kasus unilateral. Pasien yang telah menjalani prosedur operasi menunjukkan adanya penurunan tinggi basis kranial, maksila yang lebih pendek, retrograntik maksila berlebihan dan inklinasi gigi insisif atas dan bawah yang lebih ke lingual. Perawatan bertahap dibutuhkan untuk penanganan pasien dengan celah bibir dan langit-langit seperti bedah perbaikan tulang alveolar, restorasi prostodontik, dan koreksi dental definitif. Tujuan: Menganalisis pengaruh labioplasti dan palatoplasti terhadap tinggi maksila, volume sinus maksilaris dan ukuran sella turcica pada pasien celah bibir dan langit-langit unilateral. Material dan Metode: Penelitian analitik observasional dengan desain potong lintang. Subjek penelitian ini adalah anak berusia ³13 tahun dengan celah bibir dan langit-langit unilateral, telah dilakukan labioplasti dan palatoplasti, serta tidak mengikuti prosedur perawatan ortodontik cekat di RSAB Harapan Kita, Jakarta dalam kurun waktu 2011-2013. Berdasarkan kriteria inklusi dan eksklusi diperoleh jumlah samepl sebanyak 12 subjek. Setiap subjek dilakukan pengambilan gambaran radiografi CBCT untuk penilaian tinggi maksila, volume sinus maksilaris dan ukuran sella turcica. Perbandingan tinggi maksila dan volume sinus maksilaris dilakukan pada sisi celah dan sisi normal, sedangkan perbandingan ukuran sella turcica dilakukan secara deskriptif menggunakan data sekunder. Hasil penelitian: Terdapat perbedaan tinggi maksila dan volume sinus maksilaris yang signifikan antara sisi celah dan sisi normal (p=0,00 dan p=0,01). Terdapat perbedaan ukuran lebar dan kedalaman sella turcica antara subjek dengan kelompok kontrol. Kesimpulan: Labioplasti dan palatoplasti mempengaruhi tinggi maksila, volume sinus maksilaris dan ukuran sella turcica pada pasien dengan celah bibir dan langit-langit unilateral

Background: Cleft lip and palate is a common congenital disorder that formed during fetal development due to failure of the developmental processes of the face. Three-dimensional (3D) maxillary growth deficiency is often found in patients with cleft lip and palate, particularly in unilateral cases. Patients who had undergone surgical procedures show a decrease on cranial base height, shorter maxilla, severe maxillary retrograntic and more lingual inclination of upper and lower incisor teeth. Multistage treatment is neccessary for patients with the lips and palate such as alveolar bone repair, prosthodontic restoration, and definitive dental correction. Objective: To analyze the effect of labioplasty and palatoplasty to maxillary height, maxillary sinus volume and sella turcica size in patients with unilateral cleft lip and palate. Materials and Methods: Observational analytic study with cross-sectional design. The subjects of this study were children ³13-years-old with unilateral cleft lip and palate, had undergone labioplasty and palatoplasty, and did not undergo fixed orthodontic treatment procedures at RSAB Harapan Kita, Jakarta in the period of 2011-2013. Based on the inclusion and exclusion criteria, a total of 12 subjects were obtained. Each subject took a CBCT radiographic to assess the maxillary height, maxillary sinus volume and sella turcica size. Comparison of maxillary height and maxillary sinus volume was performed on the cleft and normal sides, while the comparison of the size of the sella turcica was performed descriptively using secondary data. Results: There are significant differences in the maxilla height and maxillary sinus volume between the cleft side and the normal side (p = 0.00 and p = 0.01). There is a difference in width and height of the sella turcica between the subject and the control group. Conclusion: Labioplasty and palatoplasty affect maxillary height, maxillary sinus volume and sella turcica size in patients with unilateral cleft lip and palate."
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2020
SP-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Farah Primadani Kaurow
"Sinus maksilaris merupakan struktur kraniofasial yang dapat digunakan untuk perkiraan jenis kelamin berdasarkan pengukuran morfometriknya dari gambaran CT-scan. Pada penelitian-penelitian sebelumnya didapakan ukuran morfometrik berbeda-beda pada setiap populasi, karena dipengaruhi oleh faktor ras. Tujuan penelitian ini adalah mencari nilai diagnostik dari ukuran morfometrik panjang, lebar, tinggi dan volume sinus maksilaris terhadap perkiraan jenis kelamin berdasarkan gambaran CT-Scan Maksilofasial pada suatu populasi dewasa di Indonesia. Penelitian ini menggunakan desain potong lintang terhadap 420 sinus maksilaris yang didapatkan dari hasil randomisasi data CT-Scan Maksilofasial pada populasi usia 20-50 tahun di RSUPN Dr. Cipto Mangunkusumo, Jakarta. Analisis bivariat menggunakan uji t tidak berpasangan dan analisis multivariat menggunakan uji regresi logistik. Hasil penelitian ini didapatkan nilai rerata masing-masing laki-laki dan perempuan sebesar 3,90 ± 0,3 cm dan 3.74 ± 0,3 cm pada panjang; 3.42 ± 0,6 cm dan 3.32 ± 0.5 cm pada lebar; 4.29 ± 0,6 cm dan 3.78 ± 0,4 pada tinggi; dan 7.02 ± 1.8 cc dan 6.52 ± 1.3 cc pada volume. Berdasarkan ukuran panjang, lebar, dan tinggi, didapatkan rumus y = -10,760 + 1,319*(P) – 1,647*(L) + 2,796*(T); dengan nilai cut-off sebesar 0,0606 poin, yang memberikan nilai akurasi 79,2%. Berdasarkan ukuran volume didapatkan rumus y = -1,444 + 0,213*(Volume); dengan nilai cut-off sebesar 0,2845 poin, yang memberikan nilai akurasi 58,3%. Dari penelitian ini didapatkan pengukuran morfometrik panjang, lebar, tinggi, dan volume sinus maksilaris dari gambaran CT-Scan maksilofasial dapat digunakan untuk perkiraan jenis kelamin.

Maxillary sinus is one of maxillofacial structure which can be used in sex estimation based on its morphometric measurement from CT image. Based on the previous studies, the morphometric of maxillary sinus were different in each population, because it was influenced by race. The aim of this study is to find diagnostic value from the morphometric of length, width, height and volume of maxillary sinus from maxillofacial CT image in Indonesian adult population to estimate sex. This study uses a cross-sectional design of 420 maxillary sinus obtained from randomized CT images data in population aged 20-50 years at Cipto Mangunkusumo Hospital, Jakarta. Bivariate analysis using independent T-test and multivariate analysis using logistic regression test. In this study, mean score for men and women is (3.90 ± 0.3) cm and (3.74 ± 0.3) cm on length; (3.42 ± 0.6) cm and (3.32 ± 0.5) cm on width; (4.29 ± 0.6) cm and (3.78 ± 0.4) on height; and (7.02 ± 1.8) cc and (6.52 ± 1.3) cc on volume, respectively. Based on length, width and height, estimation formula is y = -10.760 + 1.319*(L) – 1.647*(W) + 2.796*(H); with cut-off 0,0606 point, given accuracy score of 79,2%. Based on volume, estimation formula is y = -1.444 + 0.213*(volume); with cut-off point 0,2845 point, given accuracy score of 58,3%. The study showed that the morphometric measurement of maxillary sinus from CT image can be used to estimate sex."
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2020
SP-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
"[Deep bite merupakan maloklusi kedua terbanyak terjadi setelah crowding. Penelitian mengenai dampak deep bite terhadap jaringan periodontal masih jarang dilakukan. Tujuan penelitian: Mengetahui pengaruh deep bite terhadap status periodontal pada gigi anterior maksila dan mandibula. Metode: penelitian analitik potong lintang menggunakan data sekunder berupa rekam medik pasien Klinik Periodonsia RSKGM FKG UI dengan kasus deep bite dan normal bite masing-masing 50 data. Hasil: Terdapat perbedaan bermakna (p < 0,05) rerata kedalaman poket, kehilangan perlekatan, resesi gingiva antara normal bite dengan deep bite (uji Mann Whitney). Kesimpulan: terdapat pengaruh deep bite terhadap status periodontal gigi anterior maksila dan mandibula, Deep bite is the second most frequent malocclusion occurs. Research on the effects of deep bite to the periodontal status are still rare. Objective: Knowing the influence of deep bite to the periodontal status on maxillary and mandibular anterior teeth. Methods: A cross-sectional analytical study using medical records of patients in Peridontal Clinic with deep bite and normal bite each 50 data. Result: There were significant differences the average pocket depth, attachment loss, gingival recession (p<0,05) between normal bite and deep bite (Mann Whitney). Conclusions: there is influence of deep bite on periodontal status of maxillary and mandibular anterior teeth]"
[, Fakultas Kedokteran Gigi Universitas Indonesia], 2015
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
"Indonesian Journal of Dentistry 2006. Edisi Khusus KPPIKG XIV: 412-415
The purpose of this study was to analyze the effect of hotz plate appliance to maxillary arch development of complete unilateral cleft lip and palate patient. The subjects were divided into two groups. The first group consisted of 6 patients, aged under two years with hotz appliance, recruited from Hasan Sadikin Hospital Bandung, and the second group, as control group, consisted of 6 patients, aged under two years, without hotz appliance, recruited from Haji Hospital Makassar. It was showed that in group with hotz plate appliance, no difference found on the size of anterior maxillary arch and minor maxillary arch. On the other hand, in the control group, minor maxillary arch was longer than mayor maxillary arch. It was concluded that hotz plate appliances affected the palatal development of patient with complete unilateral cleft lip and palate."
Fakultas Kedokteran Gigi Universitas Indonesia, 2006
pdf
Artikel Jurnal  Universitas Indonesia Library
cover
Rina Fajarwati
"Latar Belakang: Identifikasi jenis kelamin membutuhkan sarana yang terjangkau dengan realibilitas yang baik, terutama pada kondisi jenazah yang terbakar hebat, rusak, atau terdekomposisi. Sinus maksilaris dan kanalis mandibularis merupakan salah satu struktur yang dapat digunakan untuk prakiraan jenis kelamin. Cone Beam Computed Tomography (CBCT) adalah metode non infasif yang dapat memberikan gambaran struktur anatomis maksilofasial termasuk sinus maksilaris dan kanalis mandibularis dengan resolusi yang tinggi, sehingga untuk kepentingan identifikasi forensik dapat memberikan pengukuran dengan akurasi tinggi. Tujuan: Hasil analisis perbedaan ukuran sinus maksilaris dan posisi kanalis mandibularis diharapkan dapat digunakan untuk prakiraan jenis kelamin. Metode: Membandingkan ukuran sinus maksilaris dan posisi kanalis mandibularis antara jenis kelamin menggunakan CBCT.
Hasil: Perbedaan yang bermakna pada ukuran sinus maksilaris, serta jarak dari kanalis mandibularis ke batas inferior mandibula antara laki-laki dan perempuan.
Kesimpulan: Terdapat perbedaan bermakna pada tinggi, panjang, dan lebar sinus maksilaris antara laki-laki dan perempuan, dengan nilai rerata masing-masing laki-laki dan perempuan sebesar 39.4 ± 4.6 dan 33.9 ± 4.8 pada tinggi, 39.9 ± 3.2 dan 37.4 ± 2.4 pada panjang, serta 31.1 ± 4.6 dan 28.6 ± 3.8 pada lebar sinus maksilaris. Terdapat perbedaan bermakna pada jarak dari kanalis mandibularis ke batas inferior mandibula antara laki-laki dan perempuan, dengan nilai rerata pada laki-laki dan perempuan yaitu sebesar 7.7 ± 1.7 dan 6.8 ± 1.5. Berdasarkan ukuran tinggi dan panjang sinus maksilaris, serta jarak dari kanalis mandibularis ke batas inferior mandibula maka didapatkan rumus P = 1/1+e- [-16.613 + (<0.183 x TSM) + (0.204 x PSM) + (0.260 x JIKM)] untuk prakiraan jenis kelamin, dengan nilai ≥ 0.5 pada laki-laki dan < 0.5 pada perempuan.

Background: Gender identification requires a tool which has high reliability, especially in the conditions of the bodies that are severely burned, damaged, or decomposed. The maxillary sinus and mandibular canal are one of the maxillofacial structure that can be used to identify the gender. Cone Beam Computed Tomography (CBCT) is a non-invasive method which can visualize the anatomical of the maxillofacial structure including the maxillary sinus and mandibular canal with high-resolution so that CBCT can provide better measurements for forensic identification.
Aim: The results of the study can show the differences in maxillary sinus size and mandibular canal position which are expected to be used for gender identification.
Methods: Comparing the maxillary sinus size and mandibular canal position between genders using CBCT.
Result: The maxillary sinus sizes and the distance from the mandibular canal to the inferior border of the mandible between men and women were significantly different.
Summary: There were significant differences in the height, length, and width of the maxillary sinus between men and women, with the mean value of men and women, respectively were 39.4 ± 4.6 mm and 33.9 ± 4.8 mm for height, 39.9 ± 3.2 mm and 37.4 ± 2.4 mm for length, and 31.1 ± 4.6 mm and 28.6 ± 3.8 mm for width of the maxillary sinus. There was a significant difference in the distance from the mandibular canal to the inferior border of the mandible between men and women, with a mean value were 7.7 ± 1.7 mm and 6.8 ± 1.5 mm. Based on the height and length of the maxillary sinus, which exclude the width of the maxillary sinus, and the distance from the mandibular canal to the inferior border of the mandible, the formula for gender estimation was P = 1/1+e- [-16.613 + (0.183 x Height of maxillary sinus) + (0.204 x Length of maxillary sinus) + (0.260 x JIKM). The distance from the mandibular canal to the inferior border of the mandible with male values ≥ 0.5 whereas for women when < 0.5.
"
Depok: Fakultas Kedokteran Gigi Universitas Indonesia, 2019
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Tangkudung, Gerard
"ABSTRAK Tindakan intrusi molar pertama rahang atas menggunakan penjangkar miniscrew yang diletakkan di sisi bukal dan palatal sering digunakan dan memiliki tingkat keberhasilan yang cukup tinggi. Penelitian ini dilakukan untuk mengetahui perbedaan distribusi tekanan pada tindakan intrusi molar pertama rahang atas menggunakan miniscrew yang diletakkan dengan ketinggian 3 mm, 5 mm, dan 7 mm dari cementoenamel junction, serta sudut 45° dan 90° dari sumbu gigi. Model tiga dimensi struktur kraniomaksila dibuat dari hasil pemindaian tengkorak kering. Terdapat empat Region of Interest (ROI) yang ditentukan yaitu akar molar pertama rahang atas, alveolar molar pertama rahang atas, miniscrew, dan alveolar miniscrew. Terdapat perbedaan bermakna (p<0,05) distribusi tekanan pada tindakan intrusi molar pertama rahang atas, baik pada kelompok ketinggian maupun sudut pemasangan miniscrew, di semua ROI. Gambaran tekanan pada molar pertama rahang atas dan alveolarnya terkonsentrasi di daerah akar palatal dan trifurkasi. Gambaran tekanan pada alveolar miniscrew menunjukkan perbedaan distribusi spektrum warna pada kelompok sudut pemasangan. Tindakan intrusi molar pertama rahang atas dipengaruhi oleh ketinggian dan sudut pemasangan miniscrew.

ABSTRACT
Miniscrew-assisted upper first molar intrusion had been developed recently with high rate of success. The placement of two miniscrews, buccally and palatally, is usually done to deliver such force. This research was conducted to analyse the difference of stress distribution of upper first molar intrusion using two miniscrews, placed at 3 mm, 5 mm, and 7 mm from cementoenamel junction, and 45° and 90° from the tooth axis. A three-dimensional solid model of craniomaxillary structure was rendered and the region of interests (ROI) were defined at the first molar roots, its alveolar, miniscrews, and the bone surrounding the miniscrews. Statistical analysis showed that there were significant differences (p<.05) of Von Mises mean values in the ROIs between all groups of height and angle of placement. Visual analysis showed that the stress distribution in first molar roots were concentrated at the trifurcation and palatal root apex area, while in the bone surrounding the miniscrews, the highest stress distribution was located diversely among separate angles of placement groups. The stress distribution of upper first molar intrusion using miniscrews anchorage was affected by heights and angles of miniscrews placement.

"
Depok: Fakultas Kedokteran Gigi Universitas Indonesia, 2018
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Teddy Pramana Putra Lolo Allo
"Latar Belakang: Rinosinusitis kronis diasosiasikan dengan abnormalitas variasi anatomi pada kompleks ostiomeatal, salah satunya variasi proseus unsinatus. Pola perlekatan superior diketahui memiliki korelasi signifikan dengan sinusitis frontalis, namun belum terdapat laporan mengenai korelasi dengan kejadian sinusitis maksilaris. Tujuan: Menilai hubungan antara tipe perlekatan superior prosesus unsinatus dengan ada tidaknya konkha bullosa terhadap kejadian sinusitis kronis maksila. Metode: Sebanyak 262 pasien memenuhi kriteria penelitian studi kasus-kontrol yang telah dilakukan pemeriksaan HRCT scan kepala leher selama tahun 2020 hingga 2023. Analisis bivariat dilakukan pada faktor risiko kelompok usia dan faktor risiko gabungan tipe perlekatan superior dengan adanya konkha bullosa, disajikan dalam nilai Odds Ratio (OR) dengan Interval Kepercayaan (IK) 95%. Hasil: Kelompok usia 31-60 tahun pada kedua kelompok mempunyai nilai OR sebesar 2,11 (1,16-3,81 IK 95%; p <0,05) dan kelompok usia 61-82 tahun pada kedua kelompok mempunyai nilai OR 2,82 (1,20-6,61 IK 95%; p <0,05) dibandingkan kelompok usia 18-30 tahun. Perlekatan superior prosesus unsinatus tipe II dengan konkha bullosa mempunyai nilai OR 2,58 (1,28-5,20 IK 95%; p <0,05) dan tanpa konkha bullosa mempunyai nilai OR 2,53 (1,66-3,87 IK 95%; p <0,05). Kesimpulan: Terdapat peningkatan risiko terjadinya sinusitis kronis maksila pada perlekatan superior tipe II dibandingkan dengan perlekatan tipe I.

Background: Chronic rhinosinusitis is associated with anatomical variations in the ostiomeatal complex, including uncinate process variations. The superior attachment pattern is known to have a significant correlation with frontal sinusitis, but there have been no reports on its correlation with the occurrence of maxillary sinusitis. Objective: To evaluate the relationship between the superior attachment of the uncinate process and the presence or absence of concha bullosa in the occurrence of chronic maxillary sinusitis. Method: A total of 262 patients met the criteria for a case-control research study, undergoing head and neck HRCT scans from 2020 to 2023. Bivariate analysis was conducted on age group risk factors and the combined risk factors of superior attachment type with the presence of concha bullosa, presented as Odds Ratio (OR) with a 95% Confidence Interval (CI). Results: In both study groups, the OR of 31-60 year-old group was 2,11 (95% CI 1,16-3,81; p <0,05), and the OR of 61-82 year-old group was 2,82 (95% CI 1,20-6,61; p <0,05) compared to the 18-30 year-old group. Superior attachment of uncinate process type II with concha bullosa had an OR of 2,58 (95% CI 1,28-5,20; p <0,05), and without concha bullosa, the OR was 2,53 (95% CI 1,66-3,87; p <0,05). Conclusion: There is an increased risk of chronic maxillary sinusitis in superior attachment type II compared to attachment type I.

Keywords: superior attachment of uncinate process, concha bullosa, chronic maxillary sinusitis"

Jakarta: Fakultas Kedokteran Universitas Indonesia, 2024
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>