Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 129564 dokumen yang sesuai dengan query
cover
Amanda Claudiya A.
"Heat source merupakan parameter yang penting dalam sistem panas bumi. Heat source akan memanaskan fluida atau meteoric water yang terkandung di dalam bumi. Fluida yang terpanaskan ini kemudian akan menghasilkan hot spring dan fumarol di permukaan. Munculnya manifestasi di permukaan dikarenakan adanya patahan yang menghubungkan reservoir dengan permukaan bumi. Maka dari itu, penting untuk mengetahui dimana letak reservoir dan patahan serta strukturnya saat eksplorasi. Selama ini analisis data gravitasi hanya fokus pada reservoir tidak sampai menentukan heat source. Tilt angle atau tilt derivative adalah metode derivative yang dapat digunakan untuk mengetahui kedalaman hot rock. Tilt angle memanfaatkan perbanding antara vertical derivative dengan horizontal derivative. Diharapkan dari penelitian ini kita dapat mengetahui kedalaman hot rock dari sistem geothermal yang berada di gunung lawu dengan menggunakan tilt derivative. Tidak hanya hot rock namun diharapkan juga dari penelitian ini kita dapat mengetahui letak struktur patahan yang kemudian akan digunakan untuk membuat model konseptual geothermal pada sistem geothermal di Gunung Lawu.Heat source merupakan parameter yang penting dalam sistem panas bumi. Heat source akan memanaskan fluida atau meteoric water yang terkandung di dalam bumi. Fluida yang terpanaskan ini kemudian akan menghasilkan hot spring dan fumarol di permukaan. Munculnya manifestasi di permukaan dikarenakan adanya patahan yang menghubungkan reservoir dengan permukaan bumi. Maka dari itu, penting untuk mengetahui dimana letak reservoir dan patahan serta strukturnya saat eksplorasi. Selama ini analisis data gravitasi hanya fokus pada reservoir tidak sampai menentukan heat source. Tilt angle atau tilt derivative adalah metode derivative yang dapat digunakan untuk mengetahui kedalaman hot rock. Tilt angle memanfaatkan perbanding antara vertical derivative dengan horizontal derivative. Diharapkan dari penelitian ini kita dapat mengetahui kedalaman hot rock dari sistem geothermal yang berada di gunung lawu dengan menggunakan tilt derivative. Tidak hanya hot rock namun diharapkan juga dari penelitian ini kita dapat mengetahui letak struktur patahan yang kemudian akan digunakan untuk membuat model konseptual geothermal pada sistem geothermal di Gunung Lawu.

Heat source is the important parameter in geothermal system which is will heats fluid or meteoric water that is contained in the earth. Basically, geothermal system formed as a result of heat transfer from heat source to the surrounding by conduction and convection. Geothermal manifestation occurs because of the propagation of heat from below the surface. The emergence of manifestations at the surface due to the fault that connects the reservoir to the earth rsquo s surface. Therefore, it is important to know where the location of the reservoir, the location of the fault, and the structure of the fault when exploration used gravity method. In general, analysis of gravity data only focus to determine the reservoir . Tilt angle or tilt derivative is a dervative method that can be used to determine the depth of the hot rock. Tilt angle utilizing comparison between vertical derivative with horizontal derivative. The zero contours of the tilt angle correspond to the boundaries of geologic discontinuities and are used to detect the linear features in gravity data. The half distance between 4 and 4 radians is equal to the depth of top of heat source. This research is expected that can we know the depth of top of heat source of geothermal system at Mt. Lawu using tilt derivative.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
S68018
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dimas Ahmad Syafii
"Keberadaan sistem panas bumi dapat diperkirakan dengan melihat manifestasi yang muncul di permukaan tanah akibat adanya struktur geologi, seperti sesar/patahan pada daerah potensi panas bumi. Untuk mengetahui keberadaan struktur patahan di lapangan ?DAS? digunakan metode gravitasi. Dalam metode gravitasi terdapat metode lanjutan untuk mengidentifikasi patahan, yaitu FHD (First Horizontal Derivative) dan SVD (Second Vertical Derivative). Metode tersebut memanfaatkan turunan dari nilai anomali gravitasi. Output dari metode tersebut adalah peta kontur yang menunjukkan keberadaan suatu patahan.
Terdapat delapan patahan yang teridentifikasi oleh metode FHD dan SVD, tujuh patahan merupakan patahan normal dan satu patahan merupakan petahan naik. Hasil tersebut diintegrasikan dengan data pendukung, seperti data MT, geologi, geokimia, data sumur dan model sintetik. Dari data-data tersebut dapat dibuat model densitas dan model konseptual sistem panas bumi daerah ?DAS?. Model densitas menunjukkan densitas clay cap sebesar 2,25 gr/cm3, densitas reservoir sebesar 2,41 gr/cm3, dan densitas heat source sebesar 2,81 gr/cm3. Berdasarkan model konseptual, fumarol dan mata air panas SPG merupakan zona upflow, sedangkan mata air panas BB 1 dan BB 2 merupakan zona outflow.

The existence of geothermal system can be assessed by identifying distribution of manifestations that appears on the surface. The manifestations appear because of geology structure, like fault structure on geothermal potention area. Gravity method is used to knowing the exsistence of fault structure on ?DAS field. In gravity method, there are the advanced methods to identify fault. They are FHD (First Horizontal Derivative) and SVD (Second Vertical Derivative). Those methods use derivative of gravity anomaly value. The output of FHD and SVD is contour map that indicates the exsistence of fault.
There are eight faults identified by FHD and SVD, they are seven normal faults and a reverse fault. The FHD and SVD contour map will be integrated with other support data, such as resistivity section of MT, geology data, geochemistry data, thermal gradient data, and sintetic model. Those data result density model and conseptual model of ?DAS? field geothermal system. Density model show the density of clay cap is 2,25 gr/cm3, reservoir is 2,41 gr/cm3, and heat source is 2,81 gr/cm3. Base on conseptual model, fumarole and hot spring SPG are upflow zone, while hot springs BB 1 and BB 2 are outflow zone.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2016
S63686
UI - Skripsi Membership  Universitas Indonesia Library
cover
Birohmatin Amalisana
"Wilayah Indonesia memiliki jajaran pegunungan berapi yang berpotensi besar menghasilkan sumber energi panas bumi. Salah satu wilayah yang memiliki sumber energi panas bumi yaitu terletak di Gunung Api Lawu. Energi panas bumi di Gunung Lawu hingga saat ini belum dilakukan eksplorasi dan ekploitasi secara maksimal. Tujuan dari penelitian ini adalah mengetahui persebaran wilayah potensi panas bumi di Gunung Lawu serta mengkaji hubungan antara wilayah potensi panas bumi dengan kondisi kelurusan dan satuan litologinya. Metode yang dipakai adalah metode deteksi suhu tanah dengan saluran termal serta hillshading. Eksplorasi wilayah potensi panas bumi pada tahap awal dapat ditentukan menggunakan teknologi penginderaan jauh dengan Citra Landsat 8 untuk mendeteksi panas radiasi yang ditimbulkan oleh energi panas bumi. Penelitian ini menghasilkan wilayah sebaran panas bumi di Gunung Lawu yang dominan terletak di sisi lereng sebelah selatan dan barat. Persebaran wilayah potensi panas bumi tersebut berasosiasi dengan keberadaan kelurusan yang rapat serta satuan litologi berupa lava aliran dan piroklastik

Indonesia has the ring of fire that potentially produce geothermal energy. Mount Lawu is one of the biggest geothermal resources area in Java. At this research, geothermal potential areas is carried out using remote sensing technology based on Landsat 8 to detect the heat radiation of geothermal resources. This research aims to know the distribution of geothermal potential area and also study about the correlation between geothermal potential area with lineament and lithology unit. The method was used in this researh is detection heat anomalies using thermal infrared band and hillshading methods to interpret lineament. The heat anomalies distribution had been overlayed with lineament density and lithology unit to understand the spatial correlation. The result showed that distribution of geothermal potential areas at Mount Lawu spread at south west side of the slope. The distribution of geothermal potential area is associated with the existence of lineament density and lithology units such as lava flow and pyroclastic.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
S67465
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dandi Baskoro Soebakir
"Keberadaan struktur geologi merupakan salah satu parameter penting dalam menentukan zona permeabel pada suatu sistem geotermal. Penelitian ini dilakukan di salah satu area prospek geotermal di zona Sistem Sesar Sumatera (GSF) yang termasuk dalam segmen Angkola dan Barumun yang bertujuan untuk mengidentifikasi kemenerusan fitur permukaan hingga bawah permukaan terutama struktur geologi yang berkaitan erat dengan zona permeabel dengan mengintegrasikan data geologi, geokimia, dan geofisika. Teknologi remote sensing digunakan untuk mengidentifikasi struktur geologi yang terobservasi di permukaan yang dikorelasikan dengan persebaran manifestasi permukaan. Namun, tidak semua struktur geologi yang terobservasi di permukaan dapat diamati dan kemenerusannya dari permukaan hingga bawah permukaan dilakukan dengan pendekatan geofisika menggunakan data magnetotelurik (MT) dan gravitasi. Interpretasi struktur geologi permukaan berdasarkan analisis remote sensing dan persebaran manifestasi permukaan memiliki korelasi yang positif dengan hasil gravitasi adanya struktur graben dari zona GSF yang memiliki orientasi baratlaut-tenggara. Kelurusan dan karakteristik (arah dan kemiringan) struktur ditandai dengan adanya kontras nilai gravitasi, nilai Horizontal Gradient Magnitude (HGM) maksimum, dan nilai zero Second Vertical Derivative (SVD) serta analisis Multi Scale-Second Vertical Derivative (MS-SVD). Hasil interpretasi struktur bawah permukaan gravitasi berkorelasi positif dengan analisis parameter MT (splitting curve MT) yang dapat mengindikasi zona struktur bawah permukaan. Gabungan interpretasi struktur permukaan dan bawah permukaan teridentifikasi adanya 5 struktur (F1, F2, F3, F4, dan F5) yang diklasifikasikan sebagai Struktur Pasti (F1, F2, F3, dan F4) dan Struktur Diperkirakan (F5) yang memiliki orientasi baratlaut-tenggara. Struktur F3 yang berorientasi baratlaut-tenggara merupakan struktur utama yang berperan sebagai fluid conduit (zona permeabel) yang dibuktikan dengan adanya manifestasi mata airpanas bertipe klorida. Berdasarkan hasil pemodelan inversi 3-D MT dan pemodelan kedepan 2-D gravitasi dapat mendelineasi zona reservoir pada kedalaman 1500 – 2000-meter yang dikontrol oleh struktur F3 dan zona reservoir berasosiasi dengan batuan metasediment yang nantinya dapat menentukan lokasi sumur pengeboran. Untuk memvisualisasikan sistem geotermal secara komprehensif, maka dikembangkan model konseptual dengan mengintegrasikan model geofisika yang memiliki kualitas data optimum dengan data geologi dan geokimia yang saling berkorelasi, sehingga dapat dijadikan dasar dan acuan dalam menentukan lokasi pengembangan sumur produksi dan reinjeksi dan menurunkan resiko kegagalan dalam well targeting.

The existence of geological structures is one of the important parameters in determining the permeability zone in a geothermal system. This study was conducted in one of the geothermal prospect areas in the Sumatera Fault System (GSF) zone included in the Angkola and Barumun segments which aims to identify the continuity of surface to subsurface features, especially geological structures that are closely related to permeability zones by integrating geological, geochemical, and geophysical data. Remote sensing technology is used to identify geological structures observed at the surface that are correlated with the distribution of surface manifestations. However, not all surface-observed geological structures can be observed and their continuity from the surface to the subsurface is done with a geophysical approach using magnetotelluric (MT) and gravity data. Interpretation of surface geological structures based on remote sensing analysis and the distribution of surface manifestations has a positive correlation with the gravity results of the graben structure of the GSF zone which has a northwest-southeast orientation. The alignment and characteristics (direction and slope) of the structure are characterized by the contrast of gravity values, maximum Horizontal Gradient Magnitude (HGM) values, and zero Second Vertical Derivative (SVD) values as well as Multi Scale-Second Vertical Derivative (MS-SVD) analysis. The results of gravity subsurface structure interpretation are positively correlated with MT parameter analysis (splitting curve) which can indicate subsurface structure zones. The combined interpretation of surface and subsurface structures identified 5 structures (F1, F2, F3, F4, and F5) classified as Certain Structures (F1, F2, F3, and F4) and Estimated Structure (F5) that have a northwest-southeast orientation. The northwest-southeast oriented F3 structure is the main structure that acts as a fluid conduit (permeability zone) as evidenced by the manifestation of chloride-type hot springs. Based on the results of 3-D MT inversion modeling and 2-D gravity forward modeling, it can delineate the reservoir zone at a depth of 1500 - 200 meters controlled by the F3 structure and the reservoir zone is associated with metasedimentary rocks which can later determine the location of drilling wells. To visualize the geothermal system comprehensively, a conceptual model was developed by integrating geophysical models that have optimum data quality with geological and geochemical data that are correlated, so that it can be used as a basis and guide in determining the location of production well development and reinjection and reduce the risk of failure in drilling targets."
Jakarta: Fakultas Matematika Dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Aditya Noor Permadi
"Telah dilakukan penelitian terhadap lapangan panas bumi PATRA guna mengidentifikasi struktur geologi bawah permukaan berdasarkan interpretasi dari data gravitasi. Pada penelitian ini data utama adalah data gravitasi yang didukung oleh data geologi permukaan dan metode geofisika lainnya berupa data magnetotellurik. Secara geologi, daerah penyelidikan dibagi menjadi 3 satuan batuan, yaitu; Satuan batuan malihan yang terdiri dari batuan sekis, pilit dan kuarsit, Satuan batuan Lempung dan Satuan batuan alluvium. Struktur geologi yang berkembang didaerah penyelidikan berupa sesar-sesar mendatar yang mempunyai trend hampir utara-selatan, sedangkan sesar-sesar normalnya berkembang dengan trend hampir berarah barat-timur. Dari data pengolahan gravitasi tahap awal yang telah dilakukan, dengan densitas rata-rata sebesar 2.33 gr/cc dari metode parasnis yang diduga merupakan nilai dari batuan metamorf.
Struktur geologi yang ditemukan pada daerah penelitian berdasarkan hasil gabungan filtering data gravitasi menyebutkan terdapat dua buah struktur geologi patahan naik yang saling berhadapan, sangat berkemungkinan untuk menjadi struktur graben dibawah permukaan. Sistem panas bumi lapangan PATRA merupakan sistem tectonic setting. Struktur geologi bawah permukaan bumi dapat teridentifikasi dari berbagai pengolahan dan filtering data gravitasi yang menunjukkan bahwa jalur fluida panas berada pada bagian barat dan bagian tenggara daerah penelitian.

The research has conducted on geothermal field PATRA to identify subsurface geological structures based on interpretation of gravity data.In this study,the main data is gravity data that were supported by surface geological data and other geophysical methods, magnetotelluric data. Geologically, the investigation area was divided into three lithologies, there are metamorphic rock composed of schist, phylit and quartzite, clay and alluvium.Geological structures that developing the area of investigations such as horizontal faults that has almost north south trend, while the normal faults develop with the trend nearly east west. Processing of gravity data at early stage has been done with an average density of 2 33 gr cc from parasnis method which believed as the value of the metamorphic rocks.
The geological structure discovered in area of research based on the combined results of filtering gravity data mentioned there are two geological structure thrust fault that face each other, mostly identified as a graben structure below the surface. PATRA 39 s geothermal field system is tectonic setting. Geological structure below the earth 39 s surface can be identified from variety of processing and filtering gravity data that indicating the hot fluid paths is western and the southeastern part of area of research.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
T47427
UI - Tesis Membership  Universitas Indonesia Library
cover
Robi Sobirin
"Daerah panas bumi Gunung Endut berlokasi di Kabupaten Lebak, Provinsi Banten, sekitar 40 km ke arah selatan dari kota Rangkasbitung. Terdapat empat manifestasi mata air panas yaitu mata air panas Handeuleum, Cikawah 1, Cikawah 2, dan Gajrug. Berdasarkan analisis geokimia menggunakan diagram segitiga Na-K-Mg, Cl-Li-B, dan Cl-SO4-HCO3, diketahui bahwa mata air panas Cikawah 1 bertipe klorida sedangkan lainnya bertipe bikarbonat. Temperatur reservoir berkisar 162 -180 oC diprediksi dengan geotermometer SiO2 dan NaK. Secara umum keseluruhan mata air panas merupakan out flow, namun ada pendugaan bahwa Cikawah 1 merupakan upflow ? karena berada pada partial equilibrium dan bertipe klorida. Berdasarkan metode gravitasi, mengindikasikan intrusi batuan beku di Cikawah yang memungkinkan menjadi sumber panas untuk sistem panas bumi Cikawah. Zona clay cap diduga lapisan impermeablel memanjang di bawah permukaan gunung Endut sehingga fluida reservoir tidak bisa muncul di pemukaan Gunung Endut tetapi mengalir ke arah manifestasi berupa outflow. Zona reservoir berada di bawah gunung Endut pada kedalaman > 1000 m. Panas bumi Gunung Endut merupakan sistem hidrotermal dengan fluida reservoir berupa air panas water dominated system . Area prospek panas bumi gunung Endut berada di sekitar manifestasi Cikawah hingga bagian barat gunung Endut. Diperlukan penelitian lebih lanjut dengan melakukan survey geokimia dan gravitasi di sekitar puncak Gunung Endut.

Endut geothermal area is located in Lebak, Banten province, about 40 km to the south of the town of Rangkasbitung. There are four manifestations of the hot springs, they are hot springs Handeuleum, Cikawah 1, Cikawah 2, and Gajrug. Based on geochemical analysis using the triangular diagram of Na K Mg, Cl Li B and Cl SO4 HCO3, it is known that the hot springs Cikawah 1 is type of chloride water whereas the other type of bicarbonate. Reservoir temperature ranges from 162 180 C predicted by geotermometer SiO2 and NaK. In general overall hot springs are out flow, but there are predictions that Cikawah 1 is an upflow because it is the type of partial equilibrium and chloride. Based on the gravity method, indicating igneous intrusions in Cikawah which allows the source of heat for geothermal systems Cikawah. Clay cap zone allegedly impermeable layer extends below the surface Mt. Endut so that the fluid reservoir Endut could not appear at the surface Gunung Endut but flows towards manifestation in the form of outflow. Reservoir zone located below the Mt. Endut at depths 1000 m. Geothermal of Mt. Endut is a hydrothermal system with a fluid reservoir in the form of hot water water dominated system . Geothermal prospect Mt. Endut areas located around manifestation Cikawah to the western part of the Mt. Endut. Further research is needed to conduct geochemical surveys and gravity around the summit of Mt. Endut."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
T46847
UI - Tesis Membership  Universitas Indonesia Library
cover
Anugrah Indah Lestari
"Data magnetotellurik biasanya masih dihimpun dan ditampilkan dalam bentuk profil dan diinterpretasi menggunakan inversi 1-dimensi (1-D) atau 2-dimensi (2-D). Asumsi yang digunakan dalam inversi 1-D dan 2-D dapat menyebabkan kesalahan interpretasi dikarenakan kondisi riil di bawah permukaan adalah 3-D. Oleh karena itu dilakukan pengujian inversi 1-D, 2-D, dan 3-D (full tensor impedance dan off diagonal elements) profil data sintetik 3D untuk menganalisis pengaruh efek 3D dan efek tepi. Hasil dari inversi 1D dan 2D memperlihatkan ketidakmampuan dalam mempertahankan geometri model sintetik 3D terutama dalam memperlihatkan batas tepi model sintetik 3D. Dengan menggunakan inversi 3-D, terlihat memberikan hasil yang lebih baik dalam memperlihatkan geometri model sintetik 3D. Pentingnya penggunaan on diagonal elements (Zxx dan Zyy) dalam proses inversi diperlihatkan melalui hasil data sintetik yakni menambah keakuratan dalam hasil inversi terutama pada profil bagian tepi dari benda konduktif dan resistif. Hal ini diperlihatkan melalui hasil plot nilai impedansi Zxx dan Zyy. Oleh karena itu penggunaan seluruh komponen tensor impedansi penting digunakan dalam inversi 3-D untuk menginterpretasi profil data. Arah strike juga terlihat sangat mempengaruhi hasil inversi 2-D. Analisis terhadap inversi multidimensi profil data dilakukan terhadap data riil magnetotelurik daerah prospek panas bumi Tawau, Malaysia. Dari hasil inversi1-D, 2-D, dan 3-D pada data riil didapatkan kemiripan pola distribusi zona resistivitas rendah dan tinggi pada hasil inversi 1-D dan 3-D dikarenakan hasil kedua inversi tidak dipengaruhi oleh arah strike serta hasil ini mendukung kesesuaian pada hasil model sintetik di mana hasil inversi 1-D dapat mencitrakan resistivitas bawah permukaan dengan baik pada kedalaman dangkal.

Magnetotelluric data is usually still collected and displayed in profile data and interpreted by using 1-dimensional inversion (1-D) or 2-dimensional inversion (2-D). The assumption that is used in 1-D and 2-D may lead potential pitfall during interpretation because real condition beneath the surface is 3-D. Therefore, inversion 1-D, 2-D, and 3-D (full tensor impedance and off diagonal elements) is tested in 3D synthetic profile data for analyzing the influence of 3D effect and edge effect. 1-D and 2-D inversion result shows an inability to maintain the geometry of 3D synthetic model, mainly in imaging edge border of 3D synthetic model. By using 3-D inversion profile synthetic data MT, it is proven that the use of 3-D inversion gives better result in showing the geometry of 3D synthetic model. The importance of on diagonal elements (Zxx and Zyy) in the inversion result is shown by the result of synthetic data which increase the accuracy of inversion result, particularly at edge of conductive and resistive feature. This is shown by the result of impedance value (Zxx and Zyy) ploting. Therefore, using all components of tensor impedance is important in 3D inversion to interpret profile data. Strike direction is also seen affect the result of 2D inversion. Analysis of multidimension inversion of profile data is then performed on real magnetotelluric data in Tawau geothermal prospect area. From 1-D, 2-D, and 3-D inversion result, it is obtained that there is similarity in distribution pattern of low and high resistivity zone because both of the inversion are not influenced by strike direction and this result supports the suitability of synthetic model result where 1-D inversion can image subsurface resistivity at shallow depth well.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2014
S54755
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rino Idul Putra
"Daerah penyelidikan panasbumi Banda baru terletak di kecamatan Amahai, Maluku Tengah, Provinsi Maluku. Daerah Banda Baru memiliki potensi panas bumi. Hal ini di indikasikan oleh penelitian sebelumnya yang menemukan adanya manifestasi panas bumi berupa mata air panas dengan suhu antara 60 - 68 oC. Metode gayaberat adalah metode yang efektif untuk mendelineasi struktur bawah permukaan yang mengontrol sistem panasbumi.
Pada penelitian ini, telah dilakukan pengukuran gayaberat dengan 253 titik pengukuran. Kemudian dilakukan koreksi data untuk mendapatkan peta anomali bouguer. Untuk pemisahan anomali residual dan regional dari anomali bouguer digunakan Butterworth filter.
Analisis data gayaberat dilakukan dengan menggunakan metode Horizontal Gradient (HG) dan Euler Deconvolution (ED). Kedua teknik interpretasi ini akan membantu mendeteksi sesar atau patahan yang ada di daerah penyelidikan. Kemudian hasilnya di didukung dengan hasil interpretasi sesar dari data geologi.
Hasil analisis geologi, Horizontal gradient dan Euler deconvolution, menunjukkan adanya struktur berupa sesar didekat manifestasi disekitar daerah penyelidikan panasbumi Banda Baru. Sesar ini diduga sebagai jalan bagi fluida hidrotermal untuk keluar.

Banda Baru geothermal research area is located in Amahai district, central Maluku, Maluku. Banda Baru area exhibited geothermal prospecting. It is indicated by previous investigation through which has been found manifestations such as hot springs with temperature around 60-68˚C. Gravity method is powerful way to delineate structures that controls geothermal system.
In this study, we have identified subsurface structure by gravity method. We have measured gravity data at 253 station. Then, we corrected the data to obtain bouguer anomaly map. Buttherworth filter was used to separate residual and regional anomaly from its bouguer anomaly.
Gravity data analysis was done using Horizontal gradient method and Euler deconvolution. Both interpretation techniques was used to identify faults around the study area. Then, the result of this interpretation is supported with interpretation of faults from geology data.
The result of geological analysis combined with Horizontal gradient and Euler deconvolution showed that there is a fault structure near the manifestations around Banda Baru geothermal prospect. This fault is believed to be a path for the hydrothemal fluid to flow up to the surface.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2013
S47643
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Alzaid Ponka
"Sistem panas bumi Gunung Lawu merupakan salah satu prospek panas bumi yang terletak di antara Jawa Tengah dan Jawa Timur. Pada tahap eksplorasi, survei geokimia merupakan salah satu survei yang harus dilakukan. Survei tersebut mencakup studi hidrogeokimia. Studi hidrogeokimia penting untuk menentukan suhu reservoir, asal usul sistem panas bumi, dan mekanisme sirkulasi fluida. Tujuan penelitian adalah menentukan karakteristik hidrogeokimia lapangan panas bumi Gunung Lawu, Jawa Tengah. Metode penelitian terdiri dari beberapa tahapan, yaitu tahap pendahuluan meliputi studi literatur, pengumpulan data meliputi data geologi, citra satelit, dan geokimia. Selanjutnya, tahap analisis data mencakup analisis kation, anion, dan isotop pada tiap sampel air. Daerah penelitian merupakan sistem relief tinggi. Daerah penelitian mempunyai delapan manifestasi permukaan panas bumi dengan suhu manifestasi berkisar 40-58 ºC, pH 2 dan 6. Empat mata air dingin dengan suhu berkisar 15-25 ºC dan pH 7. Manifetasi permukaan panas bumi memiliki tipe air beragam, yaitu sulfat, klorida, bikarbonat, dan dilute klorida-bikarbonat. Selain itu, air dingin didominasi oleh tipe air bikarbonat. Berdasarkan analisis geoindikator, zona upflow berada di titik manifestasi LWU, sedangkan zona outflow berada di titik manifestasi PBL atau JNW. Sistem panas bumi daerah penelitian memiliki suhu reservoir sekitar 160-170 ºC dan termasuk ke dalam klasifikasi sistem entalpi tinggi. Sumber air panas bumi daerah penelitian berasal dari air meteorik (SGN 1 dan NGT) dan air campuran (PBL, BNA, dan LWU) melalui analisis isotop. Berdasarkan ciri atau aspek geologi dan geokimia, daerah penelitian termasuk ke dalam sistem geothermal play convection dominated tipe CV-1. Luaran akhir penelitian ini adalah model konseptual hidrogeokimia lapangan panas bumi Gunung Lawu.

Gunung Lawu geothermal system is one of a geothermal prospect where is located between Central and East Java. In the exploration stage, geochemistry survey must be conducted. The survey covers hydrogeochemistry study. Hydrogeochemistry study is important to determine reservoir temperature, origin of the geothermal system, and fluid recharge mechanism. The research aims to determine the hydrogeochemical characteristics of Gunung Lawu geothermal field, Central Java. The research method consists of several stages, the preliminary stage cover literature study, data collection covers geological data, satellite imagery, and geochemistry. Furthermore, data analysis covers the analysis of cations, anions, and isotope in each water sample. The research area is a high relief system. The research area has eight geothermal surface manifestations with temperatures 40-58 ºC, pH 2 and 6. Four cold water has a temperature from 15-25 ºC and pH 7. The surface manifestation has various water types are sulfate, chloride, bicarbonate, and dilute chloride-bicarbonate. Moreover, cold water is dominated by bicarbonate water types. Based on geoindicator analysis, the upflow zone is located in LWU, while the outflow zone is located in PBL or JNW. The geothermal system in the study area has a reservoir temperature of around 160-170ºC and is included in a high enthalpy system classification. The geothermal water in the study area is originated from meteoric water (SGN 1 and NGT) and mixed water (PBL, BNA, and LWU) through isotope analysis. Based on geology or geochemistry aspect, the research area include in convection dominated CV-1 type of geothermal play. The final output of this research is the hydrogeochemical model of the Gunung Lawu geothermal field.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Indra Kurniawan
"Lapangan geotermal “x” merupakan salah satu lapangan geotermal di Indonesia yang sedang dalam proses pengembangan. Tahap eksplorasi merupakan tahapan yang paling mempunyai resiko yang besar. Untuk mengurangi resiko tersebut, diperlukan data – data yang saling terintegrasi untuk menggambarkan sistem geotermal bawah permukaan secara representatif. Data magnetotellurik dan gravitasi merupakan data utama dalam pembuatan model konseptual sistem geotermal lapangan “x”. Selain itu juga didukung dengan data geokimia dan data sumur landaian suhu. Dari metode magnetotellurik yaitu berupa analisis fasa tensor dan induction arrow didapatkan arah struktur utama atau bisa disebut dengan geoelectrical strike yaitu berarah Timurlaut – Baratdaya atau lebih tepatnya mempunyai arah N80oE. Hal ini juga diperkuat dari metode gravitasi berupa analisis derivatif dan data geologi regional dimana struktur yang teridentifikasi juga dominan berarah Timurlaut – Baratdaya. Dari hasil pengolahan data gravitasi berupa data complete bouger anomaly mempunyai nilai 53 – 82 mgal dimana daerah yang mempunyai anomali tinggi berada pada daerah sekitar manifestasi hingga ke Timur daerah penelitian. Hasil pemodelan inversi 3D dari data magnetotellurik didapatkan batuan claycap mempunyai ketebalan berkisar antara 400 – 500 m. Batuan yang berperan sebagai heatsource merupakan batuan intrusi yang mempunyai nilai resistivitas hingga mencapai 400 ohm-m. Dari analisis data geokimia menunjukkan daerah outflow pada sistem geotermal yaitu daerah dimana terdapatnya manifestasi yang muncul ke permukaan. Dari semua data tersebut dapat diintegrasikan menjadi model konseptual sistem geotermal dimana dapat digunakan sebagai acuan dalam melakukan pemboran geotermal.

The geothermal field "x" is one of the geothermal fields in Indonesia which is in the process of being developed. The exploration stage is the stage that has the greatest risk. To reduce this risk, integrated data is needed to describe the subsurface geothermal system in a representative manner. Magnetotelluric and gravity data are the main data in making a conceptual model of the field "x" geothermal system. Also besides supported by geochemical data and temperature sloping well data. From the magnetotelluric method, namely in the form of phase tensor analysis and induction arrow, the direction of the main structure is obtained or it can be called a geoelectrical strike, which is in the Northeast - Southwest direction or more precisely has a direction of N80oE. This is also reinforced by the gravity method in the form of derivative analysis and regional geological data where the identified structures are also predominantly northeast-southwest trending. From the results of processing gravity data in the form of complete bouge anomaly data has a value of 53 - 82 mgal where areas that have high anomalies are in the area around the manifestation to the east of the study area. The results of 3D inversion modeling from the magnetotelluric data show that clay cap rocks have a thickness ranging from 400 - 500 m. Rocks that act as heat sources are intrusive rocks that have a resistivity value of up to 400 ohm-m. The geochemical data analysis shows the outflow area in the geothermal system, namely the area where there are manifestations that appear to the surface. From all these data, it can be integrated into a conceptual model of the geothermal system which can be used as a reference in carrying out geothermal drilling."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>