Hasil Pencarian  ::  Simpan CSV :: Kembali

"Kemampuan inhibitor triazine dalam menginhibisi baja karbon API 5L X60 dalam lingkungan NaCl 3.5% diinvestigasi dengan menggunakan metode Electrochemical Impedance Spectroscopy (EIS) dalam berbagai variasi konsentrasi. Konsentrasi yang digunakan pada pada penelitian kali ini adalah 0 ppm, 50 ppm, 100 ppm, 150 ppm, 200 ppm, 250 ppm. Hasil pengujian menunjukkan bahwa ketika melewati konsentrasi optimum (150 ppm), nilai Rct dan efisiensi inhibitor akan berada pada nilai yang konstan, yang masing-masing nilainya adalah 581 Ω dan 68.6 %. Plot impedansi vs frekuensi yang ditunjukkan oleh kurva Bode Modulus mendukung hasil analisis data sebelumnya yang menunjukkan nilai ketahanan pada konstrasi 150 ppm memiliki ketahanan yang paling besar pada frekuensi rendah maupun tinggi.

---

The performance of Triazine based commercial corrosion inhibitor on carbon steel API 5L X60 on NaCl 3.5% solutions was investigated using Electrochemical Impedance Spectroscopy methods. Inhibitor concentration which used in these experiments was 0 ppm, 50 ppm, 100 ppm, 150 ppm, 200 ppm, and 250 ppm. Experimental results showed that when the concentration is above the optimum?s one (150 ppm), Rct and inihibitor efficiency value would be on a constant value, which each value is 581 Ω and 68.6 %. Plot of impedance vs frequency which showed by Bode Modulus curve support the previous data analysis, that the impedance value on 150 ppm had the highest impedance, at the low and high frequency."

"ABSTRAKSifat struktur, termal, dan listrik pada temperatur tinggi dari senyawa double perovskite Sr2(Fe,Ti)O6telah dipelajari pada penelitian ini.Sr2(Fe,Ti)O6 disintesis dengan metode solid state reaction. Hasil karakterisasi x-ray diffraction pada temperatur kamar menunjukkan bahwa semua sampel memiliki fase tunggal dan memiliki struktur kristal kubik double perovskite dengan space grup pm3m. Variasi jumlah atom Fe dan Ti mengakibatkan kenaikan parameter kisi dan grainsize. Grainsize yang diperoleh berkisar antara 30 nm sampai dengan 80 nm. Sifat listrik sebagai fungsi temperatur dan frekuensi dikarakterisasi menggunakan RLC-meter dengan metode spektroskopi impedansi. Hasil karakterisasi disajikan dalam Nyquist plot dan Bode plot yang digunakan untuk mengidentifikasi rangkaian ekuivalen dan parameternya. Rangkaian ekuivalen yang diperoleh menunjukkan pengaruh grain dan grain boundary terhadap sifat material. Konduktivitas dc Sr2(Fe,Ti)O6 sebagai fungsi temperatur dijelaskan dengan menggunakan persamaan Arrhenius. Energi aktivasi yang diperoleh dari hubungan konduktivitas dc sebagai fungsi temperatur menunjukkan pengaruh grain dan grain boundary pada sampel. Hal tersebut menunjukkan kemungkinan adanya oxygen vacancy pada material Sr2(Fe,Ti)O6. Kemungkinan ini diperkuat dengan hasil karakterisasi field emission scanning electron microscopy (FESEM) untuk menggambarkan morfologi sampel

---

ABSTRACTStructure, thermal, and electrical properties of double perovskite material Sr2(Fe,Ti)O6 at high temperature have been studied. Sr2(Fe,Ti)O6 was synthesized by solid state reaction method. X-ray diffraction characterization at room temperature for all samples show single phase and having cubic double perovskite structure with pm3m space group. The variation of Fe and Ti atoms result an increasing of lattice parameter and grainsize which is found between 30 nm and 80 nm. The electrical properties as a function of temperature and frequency are characterized by using RLC-meter with impedance spectroscopy method. The impedance data are presented in Nyquist and Bode plot resulting in the equivalent circuit and its parameters. The equivalent circuit shows the effect of grain and grain boundary in the electrical properties of materials. DC conductivity of Sr2(Fe,Ti)O6 as a function of temperature was explained by using Arrhenius equation. The value of the activation energy which is evaluated from dc conductivity as a function of temperature shows the effect of grain and grain boundary. The activation energy exhibits of oxygen vacancy in Sr2(Fe,Ti)O6 which is also supported by morphology of Sr2(Fe,Ti)O6 characterized by field emission scanning electron microscopy (FESEM)."

"The spectral intensity of direct and scattered solar radiation is of fundamental importance for various studies in civil engineering, agriculture, solar power generation, and radiation budgetestimation. In this paper, we describe a ground-based, wide-spectral-range sensor that can be used for measuring spectral intensities both in the visible and near-infrared spectral regions.The measurements are conducted either with artificial light sources ordirect/scattered solar radiation. The measured spectra yields information on the absorption features of atmosphericgases such as nitrogen dioxide (NO2), carbon dioxide (CO2) and water vapor, as well as aerosol optical properties in the atmosphere. Relatively weak absorption of nitrogen dioxide is measured with the technique of differential optical absorption spectroscopy (DOAS), whereas aerosol, carbon dioxide, and water vapor amounts are measured by matching the observed spectra with simulated ones. Both High Resolution Transmission (HITRAN) and ModerateResolution Atmospheric Transmission (MODTRAN) database/codes are used to derive column amounts of absorbing molecular species and tocharacterize aerosol optical properties. "