Hasil Pencarian  ::  Simpan CSV :: Kembali

"Detailed hints for the implementation of the various algorithms enable readers to write their own flow simulation program from scratch. The variety of applications is shown in several simulation results, including 93 black-and-white and 17 color illustrations. Moreover, after reading this book, readers should be able to understand more enhanced algorithms of computational fluid dynamics and to apply their new knowledge of modeling, discretization, parallelization, and visualization to other scientific fields, where numerical simulation has established itself, in addition to theoretical investigations and practical experiments, as a new path for uncovering the laws of nature. Among these fields are the examination of elastic solids, combustion, melting and coating processes, and crystal growth, as well as weather prediction."

"This volume provides a practical guide to building and using simulation models for international trade theory and policy. Through a sequence of carefully constructed and fully documented programs, the volume illustrates how GAMS can be used to analyze a wide array of problems. Modern computable general equilibrium (CGE) models for trade policy are challenging in their complexity, but can be thought of as constructions of much simpler building blocks. By developing the building blocks in a consistent manner, and then putting them together in more complex and interesting ways, the volume makes CGE accessible to anyone with a background in microeconomics/​trade theory."

"The numerical simulation of heat transfer and pressure drop characteristics was carried out on the airflow through a rectangular channel-mounted vortex generator (VG). The VG was installed on a plate that was attached to the heater. The inlet velocity of the airflow varied from 0.4 to 2.0 m/s. The VGs used in this study were concave delta winglet pairs (CDWPs) with the attack angle of 30° and with variation in the number of rows: one pair, two pairs, and three pairs. The CDWPs are predicted to produce the longitudinal vortex (LV), which increases the intensity of turbulence resulting in better mixing of flow. This, in turn, can improve the heat transfer between the plate surface and the airflow in the rectangular channel. The results showed that the installation of CDWPs does improve the overall heat transfer performance. However, it has the consequences of a greater pressure drop. Based on the variation in the number of rows, the greater the number of pairs of VGs was the greater the convection heat transfer coefficient (h) in both laminar and turbulent flows. The h value was based on the number of row of CDWPs: one pair, two pairs, and three pairs exhibited increases of 65.9-108.4%; 34.4-71%; and 42.2-110.7% compared to the baseline, respectively. A great number of rows of VGs also led to an increasing pressure drop value in laminar and turbulent flows. The percentage increases in pressure drop for CDWPs with one pair, two pairs, and three pairs, as compared to the baseline, were 70.1-92.1%; 123.6-161.3%, and 180-266.9%, respectively."

"This student-friendly introduction to the fundamental concepts and techniques of numerical analysis and numerical methods aims to develop concepts and techniques in a clear, concise, easy-to-read manner, and features fully-worked examples"