Hasil Pencarian  ::  Simpan CSV :: Kembali

"The aim of this in vitro study was to evaluate the shear bond strength of resin composite materials to dentin by using different bonding agents. Forty human premolars were selected for the study, and cylindrical posts of either Spectrum TPH and Charisma were bonded vertically to a standard flat dentinal area, prepared on the buccal survace. A chisel-shaped shearing blade, attached to the crosshead of a universal mechanical testing machine. The shear bond strengths to dentin of 10 resin composite-dentin adhesive combinations were measured. The results showed that the bond strength values of dentin bonding agents were not significant (p>0.05). It seems important for clinicians to use the combination of resin composite and dentin bonding agent recommended by the manufacturer."

"Efek sandblasting terhadap kekuatan rekat geser veneer indirek resin komposit. Perlekatan antara restorasi veneer indirek resin komposit (VIRK) dengan permukaan email diperoleh dari penggunaan resin semen multi-step (MS). Material self-adhesive dual-cured resin cement (SADRC) dengan satu tahap pemakaian mulai banyak diperkenalkan. Tujuan: Untuk mengetahui efek sandblasting (SB) terhadap kekuatan rekat geser VIRK pada email dengan menggunakan resin semen multi-step dan SADRC. Metode: Empat puluh spesimen yaitu bagian bukal email gigi premolar manusia, diratakan dan dipoles menggunakan silikon karbida. Spesimen VIRK dimasukkan dalam ruang Solidilite untuk penyinaran, kemudian dibagi menjadi 2 grup, tanpa sandblasting (n=20) dan dengan sandblasting selama 10 detik (n=20). Selanjutnya direkatkan pada email dengan menggunakan resin semen multi-step (n=10) dan SADRC (n=10). Setelah 2 jam disimpan dalam inkubator, kekuatan rekat geser spesimen diuji menggunakan Universal Mechanical Testing Machine. Data dianalisis statistik dengan uji one-way ANOVA. Hasil: Nilai rata-rata kekuatan rekat geser multi-step tanpa SB (18,95±7,80MPa) dan multi-step SB (19,30±8,21MPa) memiliki perbedaan bermakna dengan SADRC tanpa SB (4,85±2,12MPa) dan SADRC dengan SB (9,57±3,45MPa)(p<0,05). Simpulan: Sandblasting dapat meningkatkan kekuatan rekat geser VIRK pada email yang menggunakan resin semen multi-step dibandingkan dengan SADRC.

---

Attachment between restoration and enamel surface in indirect resin composite veneer restoration (IRCV) is obtained using multi-step (MS) resin coment. Recently, a one step self-adhesive dual-cured resin coment (SADRC) was introduced. Objective: To determine the effect of sandblasting on shear bond strenght (SBS) of IRCV to enamel using MS resin coment and SADRC. Methods: Forty specimens of buccal surface of enamel human premolar were used. The specimens were flattened and polished using silicon carbide. IRCV cylindrical specimens were light-cured in Solidilite chamber and were divided into two groups: IRCV without sandblasting (n=20) and with sandblasting for 10 seconds (n=20) and then bonded to enamel using MS (n=10) and SADRC (n=10), respectively. After 24h SBS of specimens were tested using a Universal Testing machine. Data were analyzed statistically by one-way ANOVA. Results: The average SBS value of IRCV without SB and bonded with MS was 18.95±7.80MPa and MS with SB was 19.30±8.21MPa. They were differ significantly with SADRC without SB (4.85±2.12MPa) and SADRC with SB (9.57±3.45MPa)(p<0.05). Conclusion: Sandblasting significantly increased SBS VIRK to enamel using MS resin cement than SADRC."

"Aplikasi asam askorbat 10% meningkatkan shear bond strength resin pada dentin pasca pemutihan gigi. Gigi pasca pemutihan gigi interna merupakan kontra indikasi untuk segera dilakukan restorasi, karena adanya radikal bebas yang masih tertinggal di dalam dentin selama 2-3 minggu dan dapat menggangu adaptasi bahan restorasi resin komposit. Tujuan: Menganalisis pengaruh aplikasi asam askorbat 10% terhadap shear bond strength resin komposit pada dentin pasca pemutihan gigi interna dengan gel H2O2 35%. Metode: Dua puluh tujuh sampel gigi dibagi menjadi tiga kelompok. Grup 1: Dentin dietsa dengan asam fosfat 35%; Grup 2: Dentin dilakukan pemutihan gigi interna dengan gel H2O2 35%, dietsa dengan asam fosfat 35%; Grup 3: Dentin dilakukan pemutihan gigi interna dengan gel H2O2 35%, aplikasi asam askorbat 10% selama 10 menit, dan dietsa dengan asam fosfat35%. Semua gigi percobaan di inkubasi pada 37°C selama 24 jam. Uji shear bond strength dilakukan dengan alat Universal Testing Machine. Data yang diperoleh dianalisis secara statistik dengan tes Kruskal Wallis dan Mann Whitney. Hasil: Analisis sembilan sampel dari masing-masing grup menunjukkan bahwa peningkatan shear bond strength yang paling banyak terjadi pada Grup 3 (56,04±11,06MPa) dibanding dengan Grup 2 (29,09±7,63MPa) dan Grup 1 (25,55±2,22MPa) dan perbedaannya bermakna secara statistik (p<0,05). Simpulan: Aplikasi asam askorbat 10% pada dentin pasca pemutihan gigi interna dengan gel H2O2 35% dapat meningkatkan shear bond strength resin komposit.

---

Restoration of the teeth immediately after bleaching with H2O2 35% is contraindicated due to the remnants of free radical that will stay inside dentin for 2-3 weeks which will compromise the adhesiveness of composite resin. Objective: The aim of this study was to evaluate the influence of 10% ascorbic acid on shear bond strength of composite placed on bleached dentin. Methods: Twenty seven samples were divided equally into three groups. Group 1: dentin was etched with 35% phosphoric acid; Group 2: dentin was bleached with 35% H2O2 followed by etching with 35% phosphoric acid; Group 3: dentin was bleached with 35% H2O2, followed by application of 10% ascorbic acid and etched with 35% phosphoric acid. All samples were then stored at 370C for 24 hours. The Universal Testing Machine was used to measure shear bond strength and the results were analyzed with Kruskal Wallis and Mann Whitney test. Results: After nine independent experiments, 10% ascorbic acid application on bleached dentin resulted in highest increased in bond stregth (56.04±11.06MPa) compared to Group 2 (29.09±7.63MPa) and Group 1 (25.55±2.22MPa) and the difference was statistically significant (p<0.05). Conclusion: Application of 10% ascorbic acid to the bleached dentin improved the shear bond strength of resin composite."

"Single-step self-etch adhesive systems are the system that combine self etching primer and bonding agent into one step application. This system was developed as the effort to simplified in application prosedures and give a good bond strength of resin composites to dentin surface. The purpose of this study was to examine the bond strength of resin composites with two singlestep self-etch adhesives system (Xeno III and Clearfil Tri-S Bond) to bovine dentin at temperature of adhesive 3ºC, 22ºC and 30ºC. Adhesive was applied to dentin surface (bovine insisivus mandibular dentin) follow by resin composites bonded according to the manufacturer’s instructions. Tensile bond strength of 60 specimens were tested UTM (universal testing machine) after 24 hours storage in aquadest at 37 ºC. The results were analyzed using ANOVA test followed by Tukey’s test (p< 0,05). The bond strength of Xeno III was significantly diffrent from that of Clearfil tri-S Bond, 0,66±0,271, 2,70±1,528, 0,23±0,104 versus 2,07±0,272, 4,77±0,689, 4,39±1,205 MPa at temperature of materials 3ºC, 22ºC and 30ºC respectively. The bond strength of two single- step adhesives system (Xeno III and Clearfil Tri-S Bond) were highest at temperature 22ºC than other temperatures of materials."

"Summary:Comprehensively reviews bonding to enamel, dentin and cementum and analyses relevant adhesion mechanisms. In this book, emphasis is placed on the characterization of material interfaces with dental tissues in situ. It is addressed to both the dental researcher and the clinician."

"Tujuan penelitian ini untuk mengetahui pengaruh penggunaan sumber sinar berbeda terhadap kekuatan tarik diametral resin komposit bulk-fill. Resin komposit bulk-fill Tetric N-Ceram Bulk Fill dibuat sebanyak 20 spesimen berbentuk lempeng dengan diameter 6 mm dan tebal 3 mm. Spesimen dibagi menjadi dua kelompok yaitu kelompok yang disinari dengan sumber sinar QTH dan sumber sinar LED. Uji kekuatan tarik diametral dilakukan dengan menggunakan Universal Testing Machine. Hasil penelitian menunjukkan nilai rerata kekuatan tarik diametral resin komposit bulk-fill yang disinari sumber sinar QTH dan LED sebesar 38.62 2.34 dan 42.02 3.21. Hasil uji independent sample T menunjukkan nilai rerata pada kedua kelompok berbeda bermakna.

---

This study aimed to evaluate the effect of using different light sources on the diametral tensile strength of bulk fill resin composite. Bulk fill resin composite Tetric N Ceram Bulk Fill was used to make of 20 disc shape specimens with 6 mm in diameter and 3 mm in thickness. Specimens were divided into two groups, the two groups were polymerized with using QTH and LED light source curing unit. Diametral tensile strength test was conducted by using a Universal Testing Machine Shimadzu, Japan. The results showed that diametral tensile strength mean value of bulk fill resin composite that were cured with QTH and LED light source were 38.62 2.34 and 42.02 3.21 MPa respectively. Independent sample t test results showed that the mean value of the two groups was significantly different."

"The bond strength between glass ionomer and tooth structure can be improved with application of conditioner on enamel or dentin surface to remove the smear layer. The bond strength can be measured with shear bond strength testing. This study aimed to determine the difference of shear bond strength of glass ionomer cement to primary teeth dentine after conditioner application for 10",20" and 30". Twenty seven primary mandibular incisors were randomly divided into 3 groups that were subjected to application of 10% polyacrylic acid conditioner (Dentin Conditioner, GC) for 10",20" and 30", and restoration with glass ionomer cement (Fuji IX GP, GC). The specimens were kept in an incubator at 37°C for 24 hours. Shear bond strength test was done by using Universal Testing Machine Shimazu AG-5000 with 50 kgf load and crosshead speed of 0.5 mm/min. Anova was used for statistical evaluation. Although the results showed no statistically significant differences in the shear bond strength of the glass ionomer cement between the test groups (p>0.05), the mean bond strength decreased with increasing duration of conditioner application, so that highest mean bond strength was obtained at 10" application."

"[ABSTRAKPenelitian ini bertujuan untuk membandingkan kuat rekat geser dan AdhesiveRemnant Index (ARI) dua produk breket metal yang direkatkan dengan satu adesif.Dua puluh gigi premolar atas manusia ditanam pada silinder PVC dengan resinakrilik. Spesimen dibagi menjadi dua kelompok, kelompok A: breket metal 3B, Cina+ Transbond XT; kelompok B: breket metal Protect, Cina + Transbond XT (3M,Unitek, Amerika). Dihasilkan rerata kuat rekat geser 6,09 dan 7,91 MPa padakelompok A dan B (p<0,05) dan nilai ARI: 1 dan 2 pada kedua kelompok (p>0,05).Disimpulkan bahwa dua kelompok memiliki nilai kuat rekat geser yang berbedabermakna dengan kegagalan ikatan bersifat kohesifABSTRACTThe aims of this study were to compare in vitro shear bond strength (SBS)and Adhesive Remnant Index (ARI) of two metal bracket products bonded with anadhesive material. Twenty human upper first premolar embedded in acrylic resin.Specimens were divided into two groups, Group A: 3B, China metal bracket +Transbond XT; Group B: Protect, China metal bracket + Transbond XT (3M,Amerika). The mean SBS for Group A and B were 6,09 dan 7,91 MPa and ARI: 1and 2 (p>0,05). It was concluded that the SBS of two groups was significantlydifferent with cohesive bond failure.;The aims of this study were to compare in vitro shear bond strength (SBS)and Adhesive Remnant Index (ARI) of two metal bracket products bonded with anadhesive material. Twenty human upper first premolar embedded in acrylic resin.Specimens were divided into two groups, Group A: 3B, China metal bracket +Transbond XT; Group B: Protect, China metal bracket + Transbond XT (3M,Amerika). The mean SBS for Group A and B were 6,09 dan 7,91 MPa and ARI: 1and 2 (p>0,05). It was concluded that the SBS of two groups was significantlydifferent with cohesive bond failure., The aims of this study were to compare in vitro shear bond strength (SBS)and Adhesive Remnant Index (ARI) of two metal bracket products bonded with anadhesive material. Twenty human upper first premolar embedded in acrylic resin.Specimens were divided into two groups, Group A: 3B, China metal bracket +Transbond XT; Group B: Protect, China metal bracket + Transbond XT (3M,Amerika). The mean SBS for Group A and B were 6,09 dan 7,91 MPa and ARI: 1and 2 (p>0,05). It was concluded that the SBS of two groups was significantlydifferent with cohesive bond failure.]"

"Objectives. The aim of this study was to compare the fracture toughness of a microhybrid and a flowable microhyrid resin composites. Methods. Test specimens (30x15x2)mm made of amicrohybrid and a flowable microhybrid were prepared in a double torsion mould and were then polymerized for 20 seconds using a light-curing device. Taken out from the mould, the specimens were than soaked in disfilled water (37°C) for 1 hour and then fractured in a double-torsion technique. t-Test was used to test significance difference between the microhybrid and flowable microhybrid resin composites. Result. The use of double-torsion technique resulted in crack initition and crack arrest which revealed Klc of 1.14 MN/m3/2 and 1.045 MN/m3/2 for the microhybrid and the flowable microhybrid resin composites, respectively. Both resin composites were insignificantly different in the fracture toughness values showed by t–Test. Conclusions. The present study suggested that there was no significant difference between the microhybrid and the flowable microhybrid resin composites tested. It appreared that filler fraction might not affect the fracture toughness of the resin composties tested."

"Latar Belakang: Residu radikal bebas pasca perawatan internal bleaching dapat mengganggu proses polimerisasi resin komposit. Akibatnya, terjadi penurunan kekuatan ikatan restorasi. Antioksidan ekstrak teh hijau dapat digunakan untuk menghilangkan radikal bebas pasca bleaching dan meningkatkan shear bond strength resin komposit. Tujuan: mengetahui perbedaan shear bond strength resin komposit pada dentin pasca internal bleaching dengan dan tanpa aplikasi ekstrak teh hijau pada konsentrasi yang berbeda selama 2 menit. Metode: 25 gigi premolar, dipotong dalam arah mesiodistal, dan dibagi menjadi 5 kelompok: Kelompok 1 dentin normal, Kelompok 2 dentin pasca bleaching, Kelompok 3 dentin 2 minggu pasca bleaching, Kelompok 4  dentin pasca bleaching dengan teh hijau 10% 2 menit, dan Kelompok 5 dentin pasca bleaching dengan aplikasi teh hijau 35% 2 menit. Semua kelompok diaplikasikan restorasi resin komposit. Uji shear bond strength menggunakan Universal Testing Machine. Analisis statistik menggunakan one-way ANOVA dan Uji Post Hoc Bonferroni. Hasil: Uji Post Hoc Bonferroni menunjukkan perbedaan bermakna antara kelompok 1 dan 4, kelompok 2 dan 5, serta kelompok 4 dan 5. Kesimpulan: Aplikasi antioksidan ekstrak teh hijau 35% selama 2 menit lebih tinggi dalam meningkatkan shear bond strength resin komposit dibandingkan dengan aplikasi ekstrak teh hijau 10% selama 2 menit pada dentin pasca internal bleaching menggunakan hidrogen peroksida 35%.

---

Introduction: Internal bleaching treatment could leave free radicals in the dentinal tubules. It can interfere with the polymerization process of the composite resin. Antioxidants from green tea extract can remove the free radicals after bleaching and increase the shear bond strength of composite resin.

Objective: To determine the shear bond strength of composite resin on dentin after internal bleaching with and without green tea extract application at different concentrations in 2 minutes.

Methods: 25 premolars were cut in mesiodistal direction and divided into five groups: Group 1 normal dentin, Group 2 bleached dentin, Group 3 bleached dentin, Group 4 10% green tea application in 2 minutes, and Group 5 35% green tea application in 2 minutes. All groups were restored with composite resin. All specimens' shear bond strength was tested with the Universal Testing Machine. The data were analyzed with one-way ANOVA and Bonferroni Post Hoc Test.

Results: Post Hoc Bonferroni test showed that there were statistical differences  in groups 1 and 2, groups 1 and 4, groups 2 and 5, and groups 4 and 5.

Conclusion: 35% green tea extract is more effective than 10% green tea extract as an antioxidant for increasing the shear bond strength of composite resin after internal bleaching."