Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 6914 dokumen yang sesuai dengan query
cover
"Modifikasi permukaan pada semen kalsium fosfat dengan multilapis Ti-Al-Cr dan hidroksiapatit dengan metode sol-gel. Implan gigi berbahan dasar logam paduan titanium Ti-Al-Cr dilapisi hidroksiapatit diketahui masih memiliki kelemahan. Oleh karena itu dilakukan pengembangan dengan modifikasi permukaan dengan multilapis Ti-Al-Cr dan hidroksiapatit pada semen kalsium fosfat untuk aplikasi implan dental. Tujuan: Penelitian ini bertujuan untuk melihat ketebalan multilapis logam paduan Ti-Al-Cr dan hidroksiapatit pada CPC dengan sintesis metode sol-gel. Metode: Analisis ketebalan multilapis dan mikrostruktur logam paduan Ti-Al-Cr dan hidroksiapatit pada CPC dilakukan dengan menggunakan Scanning Electron Microscopy (SEM). Hasil: SEM menunjukkan lapisan logam paduan Ti-Al-Cr pada CPC berhasil dibentuk dengan ketebalan 1µm sedangkan lapisan hidroksiapatit yang terbentuk adalah 10µm. Simpulan: Modifikasi permukaan dengan multilapis Ti-Al-Cr dan hidroksiapatit pada CPC berhasil dilakukan dengan menggunakan metode sol-gel dengan ketebalan bervariasi.

Implan gigis based on metal still has weaknesses. New development is currently developed with the surface modification of multilayer coatings Ti-Al-Cr and hydroxyapatite on calcium phosphate cement (CPC) for Implan gigi application. Objective: To analize the thickness of multilayer coating alloy Ti-Al-Cr and hydroxyapatite on CPC synthesis by sol-gel method. Methods: Scanning electron microscopy (SEM) was conducted to analyze the thickness and morphology of microstructure layer formed on CPC. Result: SEM showed that coating Ti-Al-Cr on CPC successfully formed 1µm of thickness and showed 10µm of hydroxyapatite. Conclusion: The innovation of modification surface multilayer coatings Ti-Al-Cr and hydroxyapatite on CPC was successfully done by sol-gel method with a variety thickness."
Fakultas Kedokteran Gigi Universitas Jenderal Achmad Jani, 2012
pdf
Artikel Jurnal  Universitas Indonesia Library
cover
Wahyu Dian Laksanawati
"ABSTRAK
Tesis ini melaporkan proses dan hasil penelitian yang dilengkapi oleh karakterisasi material
La0,67Sr0,33Mn1-xNixO3 dengan variasi x = 0,00 ; 0,15 ; 0,20 ; 0,25 yang telah berhasil
disintesis dengan metode sol gel. Hasil refinement dari data XRD menunjukkan bahwa pada
material La0,67Sr0,33Mn1-xNixO3 telah terbentuk fasa tunggal untuk empat variasi sampel yaitu
La0,67Sr0,33Mn1-xNixO3 dengan x = 0,00 ; 0,15 ; 0,20 ; 0,25. Dari hasil refinement
menggunakan perangkat lunak High Score didapatkan ukuran kristal pada masing ? masing
sampel 22,66 nm ; 23,26 nm ; 21,18 nm ; 18,62 nm. Gugus fungsi Mn-O-Mn terbentuk dari
hasil uji FTIR bervibrasi regangan pada bilangan gelombang sekitar 600 cm-1. Dari hasil uji
SEM Informasi mengenai morfologi sampel La0,67Sr0,33Mn1-xNixO3 menunjukkan bahwa
antara partikel saling teraglomerasi. Pada hasil pengujian distribusi ukuran partikel
menunjukkan bahwa rata ? rata ukuran partikel x = 0,00 ; 0,15 ; 0,20 ; 0,25 yaitu 502,9 nm ;
447,6 nm ; 264,8 nm ; 371,7 nm. Jumlah konsentrasi spin pada sampel pada masing ? masing
nilai x pada hasil uji ESR menunjukkan penurunan, yaitu ketika doping Ni ditambah maka
luas area dibawah kurva absorpsi menurun. Hal ini dikarenakan adanya ion Ni2+ yang
mensubstitusi ion Mn3+ sehingga menghambat hopping elektron dari elektron eg (ion Mn3+)
ke t2g (ion Mn4+) pada mekanisme double excange sehingga spin pada elektron t2g akan
antiparalel. Kompetisi antara sifat feromagnetik dengan antiferomagnetik menjadikan spin
akan berubah arah sehingga kemagnetan sampel akan menurun dan momen magnetik
menjadi acak. Hasil ESR ini digunakan untuk mengkonfirmasi hasil VNA. Kemampuan
absorpsi gelombang mikro ditunjukkan dengan nilai reflection loss pada sampel x = 0,00 ;
0,15 ; 0,20 ; 0,25 berturut-turut sebesar -65,37 dB , -66,17 dB, -66,67 dB dan -77,22 dB.
Reflection loss meningkat ketika doping Ni ditambah karena gelombang elektromagnetik
yang diberikan kepada sampel La0,67Sr0,33Mn1-xNixO3 digunakan untuk menyearahkan momen
magnetik.

ABSTRACT
This thesis reports the process and the results are supplemented by material characterization
La0,67Sr0,33Mn1-xNixO3with variation x = 0.00; 0.15; 0.20; 0.25 which has been synthesized by
sol gel method. Results refinement of the XRD data showed that the material La0,67Sr0,33Mn1-
xNixO3have formed a single phase to four-sample variation is La0,67Sr0,33Mn1-xNixO3with x =
0.00; 0.15; 0.20; 0.25. From the results of using the software refinement High Score obtained
crystal size on each - each sample of 22.66 nm; 23.26 nm; 21.18 nm; 18.62 nm. Functional
groups Mn-O-Mn is formed from the FTIR test strain vibrate at wave number 600 cm-1.
From the test results SEM morphology Information La0,67Sr0,33Mn1-xNixO3samples showed
that the particles are agglomerated. In the particle size distribution of the test results showed
that the average - average particle size x = 0.00; 0.15; 0.20; 0.25 is 502.9 nm; 447.6 nm;
264.8 nm; 371.7 nm. Number of spin concentration in the sample on each - each value of x in
the ESR test results showed a decrease, when doping Ni plus, the area under the curve of
absorption decreases. This is due to the substitution of Ni2+ ions Mn3+ ions thus inhibiting
electron hopping of electrons eg (ion Mn3+) to t2g (Mn4+ ion) in the mechanism of double
excange so that the spin of the electrons will t2g antiparallel. Competition between
ferromagnetic properties with antiferromagnetic spin make will change the direction so that
the sample magnetization will decrease and the magnetic moments become random. ESR
results are used to confirm the results of the VNA. Microwave absorption ability is indicated
by the value of reflection loss on the sample x = 0.00; 0.15; 0.20; 0.25 respectively for -65.37
dB, -66.17 dB, -66.67 dB and -77.22 dB. Reflection loss increases when the doping Ni plus
because the electromagnetic waves given to the sample La0,67Sr0,33Mn1-xNixO3 used to align
the magnetic moment"
2016
T46423
UI - Tesis Membership  Universitas Indonesia Library
cover
Hanifa Zahra
"Tulang adalah jaringan tubuh yang dapat menyembuhkan dirinya sendiri apabila mengalami kerusakan. Namun pada beberapa kasus cacat tulang, cangkok tulang (bone graft) atau material pengganti tulang dibutuhkan untuk membantu penyembuhan jaringan. Terdapat tiga jenis cangkok tulang yaitu autograf, allograf, dan xenograf. Karena terbatasnya sumber tulang untuk cangkok tulang, peneliti mencari material alternatif sebagai pengganti tulang. Biokeramik telah banyak diteliti karena dinilai sebagai material yang paling menjanjikan sebagai pengganti tulang. Bifasik kalsium fosfat (BCP), tersusun atas hidroksiapatit (HA) dan b-trikalsium fosfat (b-TCP), menunjukkan potensi besar sebagai material pengganti tulang karena sifatnya yang bioaktif, biokompatibel, dan laju degradasi yang cocok dengan laju pertumbuhan tulang. Hidroksiapatit di sintesis dengan metode presipitasi gelombang mikro. Serbuk hidroksiapatit dicampurkan ke dalam larutan polivinil alkohol yang bertujuan untuk menghasilkan hidroksiapatit dengan mikrostruktur berpori. Selanjutnya, serbuk hidroksiapatit dipadatkan dan disintering dengan variasi temperatur sintering mulai dari 800 °C hingga 1300 °C untuk mempelajari perubahan fasa dan mikrostruktur dari hidroksiapatit. Fase kristal, gugus fungsi, morfologi, dan sifat mekanik diuji dengan X-ray Diffraction (XRD), Fourier Transform Infrared FTIR, Scanning Electron Microscope (SEM), dan Mikro Vickers. XRD menunjukkan terjadi perubahan fase HA menjadi b-TCP pada temperatur 1000 – 1300 °C. Hasil FTIR menunjukkan tidak ditemukannya gugus vinil yang berarti PVA telah sepenuhnya terdegradasi akibat sintering dengan temperatur tinggi. Pori yang dihasilkan memiliki bentuk spherical-like dengan ukuran yang semakin besar seiring dengan peningkatan temperatur sintering. Nilai kekerasan maksimal sebesar 4,166 GPa dihasilkan oleh hidroksiapatit yang disintering pada temperatur 1200 °C dan kekerasan menurun pada temperatur diatasnya karena peningkatan dekomposisi HA.

Bone is a tissue that can heal by itself. However, for some cases of bone defects, a bone graft or bone substitute is needed to help bone tissue to heal. There are three kinds of bone grafting which is autograft, allograft, and xenograft. Due to the limited source of bone for bone grafting, researchers eager to find an alternative material for bone substitution. Bioceramic has been widely studied because they are considered the most promising material for bone tissue substitution. Biphasic calcium phosphate (BCP), composed of hydroxyapatite (HA) and b-tricalcium phosphate (b-TCP), has shown great potential as a bone substitute material due to its bioactive, biocompatible properties and the rate of degradation that corresponds to the growth rate of bone. Hydroxyapatite nanocrystal was synthesized through the microwave-assisted precipitation method. Hydroxyapatite powder was later added into a polyvinyl alcohol solution, which is aimed to produced hydroxyapatite with a porous microstructure. Hydroxyapatite powder was compacted and sintered at various temperatures, from 800 – 1300 °C, to study the transformation of phase and microstructure of hydroxyapatite. The crystal phase, functional groups, morphology, and hardness of biphasic calcium phosphate were determined through X-Ray Diffraction (XRD), Fourier Transform Infrared (FTIR) Spectroscopy, Scanning Electron Microscope (SEM), and Vickers Microhardness Tester. XRD result shows that the b-TCP phase appears due to the decomposition of HA at 1000 – 1300 °C. FTIR result shows there is no sign of a vinyl functional group, which means that PVA has fully degraded due to sintering with high temperature. Produced pores have a spherical-like shape and become larger as the sintering temperature reaches up to 1300 °C. The maximum hardness value of 4,166 GPa obtained from the hydroxyapatite sintered at 1200 °C and slightly decreased at 1300 °C due to increased decomposition of HA"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ghiska Ramahdita
"Dalam penelitian ini telah dilakukan fabrikasi suatu kamar reaksi baru yang akan ditempatkan pada alat difraksi sinar X (XRD). Penelitian dilanjutkan dengan investigasiex situ dari serbuk kalsium fosfat hasil sintesis kimiawi dengan variasi waktu kontak dengan ammonia selama 0, 3, 4, 5, 15, dan 36 jam yang secara khusus ditujukan untuk menginvestigasi proses mineralisasi kalsium fosfat. Selama transformasi kalsium fosfat menjadi hidroksiapatit, telah terdeteksi adanya pembentukan fase-fase perantara, yaitu brushite dan monetite, melalui karakterisasi XRD. Hasil penelitian juga menunjukkan bahwa meningkatnya waktu kontak ammonia dari 4 hingga 36 jam mampu meningkatkan ukuran kristalit mineral dari 9.3 menjadi 16.1 nm. Hasil-hasil penelitian ini dapat dijadikan acuan untuk investigasi lebih lanjut mengenai mineralisasi kalsium fosfat, khususnya melalui investigasi in situ via XRD.

In the current research, fabrication of newly-designed reaction chamber for X-Ray Diffraction (XRD) has been conducted, followed by ex situ investigation of chemically synthesized CaPwith various time of 0, 3, 4, 5, 15, and 36 hours in contact with ammonia. This route was specifically aimed at investigating the mineralization of CaP. During the transformation of CaP toHydroxy Apatite(HA), formation of intermediate phases, i.e. brushite (DCPD) and monetite (DCPD) is well detected by XRD characterization. Increasing of contact time with alkali atmosphere from 4 to 36 hours has increased the crystallite size of CaP minerals from 9.3 to 16.1 nm. Those results can be a baseline for further investigation of CaP mineralization, especially in situ XRD investigation."
Depok: Fakultas Teknik Universitas Indonesia, 2013
T39016
UI - Tesis Membership  Universitas Indonesia Library
cover
Della Rachma Tresnasari
"Hidroksiapatit HA dan ?-trikalsium fosfat TCP , yang merupakan fasa dari kalsium fosfat, memiliki sifat biokompatibilitas yang baik dan struktur kimia yang sejenis dengan komponen anorganik pada tulang dan gigi. HA dan TCP berperan dalam pembentukan biphasic calcium phosphate BCP. Penelitian ini bertujuan untuk mengidentifikasi pengaruh variasi suhu dan atmosfer pemanasan terhadap morfologi, stuktur kristal, dan ikatan gugus fungsi dari serbuk kalsium fosfat. Pemanasan kalsium fosfat dilakukan pada suhu 800°C dan 900°C, masing-masing dalam udara ambien dan argon. Kalsium fosfat tanpa pemanasan digunakan sebagai pembanding. Pengujian yang dilakukan adalah pengamatan dengan Transmission Electron Microscopy TEM , pengujian X-Ray Diffraction XRD, Fourier Transform Infrared Spectroscopy FTIR, dan Differential Scanning Calorimetry DSC. Fasa HA dan TCP terbentuk pada suhu pemanasan 800°C dengan kedua kondisi atmosfer karena terjadi reduksi ikatan CO32-. Serbuk kalsium fosfat menunjukkan kristalinitas yang paling baik setelah mengalami pemanasan pada suhu 900 ?C dengan atmosfer argon. Pembentukan fasa ?TCP secara keseluruhan terjadi pada suhu 900°C pada kedua atmosfer karena terjadi pembentukan ikatan C-H dan C=O serta reduksi ikatan OH-.

Hydroxyapatite HA and tricalcium phosphate TCP , which are the phases of calcium phosphate, have a good biocompatibility and similarity in chemical structure with inorganic components found in teeth and bones. HA and TCP have a role in forming biphasic calcium phosphate BSC. This research was aimed to identify the effects of using varied temperatures and atmospheres in heat treatment to study the morphology, crystalline structure, and bonds of functional group of calcium phosphate powder. The heat treatment of calcium phosphate was conducted at the temperature of 800°C and 900°C, both in ambient air and argon atmmospheres. As received calcium phosphate without heat treatment was used as comparison. The characterizations performed were Transmission Electron Microscopy TEM, X Ray Diffraction XRD, Fourier Transform Infrared Spectroscopy FTIR, and Differential Scanning Calorimetry DSC. The phases of HA and TCP were formed at the temperature of 800 C in both atmospheric conditions because of the reduction of CO32 bond. Calcium phosphate powder exhibited the highest crystallinity encountered at the temperature of 900°C in argon atmosphere. The form of TCP was occurred at 900 C in both atmospheric conditions because the forming of C H and C O bond along the reduction of OH bond."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
S67865
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fildza Hasnamudhia
"Latar Belakang: Penyakit gigi dan mulut yang paling banyak ditemukan di Indonesia adalah karies gigi. Penggabungan antara lilin propolis, yang mempunyai sifat antibakteri, dan CPP-ACP, yang merupakan agen remineralisasi, sebagai bahan aktif di dalam medium permen karet CPP-ACP-Propolis merupakan suatu keuntungan dan inovasi baru dalam upaya pencegahan karies.
Tujuan: Menganalisis kerja dari CPP-ACP dan lilin propolis jika digabungkan dalam satu formulasi permen karet, dilihat dari kadar ion kalsium dan ion fosfat yang dilepas CPP-ACP dan penekanan massa biofilm S.mutans oleh lilin propolis, terhadap saliva subjek karies. Metode: Dilakukan simulasi pengunyahan lima konsentrasi permen karet (0%propolis, 0%CPP-ACP; 0%propolis + CPP-ACP; 2%propolis + CPP-ACP; 4%propolis + CPP-ACP; 6%propolis + CPP-ACP) secara in vitro pada 25 sampel saliva subjek karies kemudian diuji menggunakan alat Atomic Absorption Spectrophotometer untuk melihat kadar ion kalsium, Ultraviolet-Visible Spectrophotometer untuk melihat kadar ion fosfat, serta uji crystal violet untuk menganalisis penurunan massa biofilm.
Hasil: Terdapat peningkatan kadar kalsium yang signifikan pada saliva + eluen permen karet dibandingkan dengan kontrol saliva, dengan tingkat pelepasan kalsium tertinggi dari permen karet CPP-ACP + 2% propolis. Terdapat peningkatan kadar fosfat yang tidak signifikan antara kontrol saliva dan saliva+eluen permen karet. Terjadi penurunan massa biofilm S.mutans yang signifikan antara kontrol saliva dan saliva+eluen permen karet, dengan penurunan terbanyak oleh konsentrasi permen karet CPP-ACP dan CPP-ACP+6%propolis. Simpulan: Simulasi pengunyahan permen karet CPP-ACP-Propolis menghasilkan peningkatan kadar ion kalsium dan ion fosfat, serta penurunan massa biofilm S.mutans pada saliva subjek karies.

Background: The most frequent oral disease found in Indonesia is caries. The combination of propolis wax, which is an antibacterial agent, and CPP-ACP, which is a remineralization agent, as the active compounds in chewing gum is an advantage and a new innovation in caries prevention. Aim: To analyze the effect of CPP-APP and propolis wax if both are combined in a chewing gum formulation, observed from the calcium and phosphate ion level released by CPPACP and the emphasis of S.mutans biofilm mass by propolis wax, towards cariesactive subjects’ saliva.
Methods: Chewing simulation being done in vitro to 25 caries-active subjects’ saliva sample using five concentrations of chewing gums (0%propolis,0%CPP-ACP; 0%propolis+CPP-ACP; 2%propolis+CPP-ACP; 4%propolis+CPP-ACP; 6%propolis+CPP-ACP), then being tested using Atomic Absorption Spectrophotometer to analyze calcium ion level, Ultraviolet-Visible Spectrophotometer to analyze phosphate ion level, and biofilm assay using crystal violet to analyze the decline in biofilm mass.
Results: After chewing simulation, calcium ion level on saliva+gum eluent have increased significantly compared to saliva control, with the highest calcium level released by CPP-ACP +2%propolis chewing gum. There is insignificant phosphate level change between saliva control and saliva + gum eluent. There is also significant decline of S.mutans biofilm mass in the saliva + gum eluent, most decline by CPP-ACP chewing gum and CPP-ACP+6%propolis. Conclusion: CPP-ACP-Propolis chewing simulation generate the increase of calcium and phosphate ion level and the decline in S.mutans biofilm mass of caries-active subjects’ saliva"
Fakultas Kedokteran Gigi Universitas Indonesia, 2015
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Aditya Wisnu Putranto
"Latar Belakang : Remineralisasi Guided Tissue Remineralization (GTR) dentin digunakan untuk meningkatkan pembentukan kristal nano ke daerah gap zone serta membangun struktur mineral apatit pada kolagen demineralized dentin dan Carboxymethyl Chitosan (CMC) berperan sebagai protein analog serta memicu remineralisasi dentin. Tujuan: Mendapatkan novel semen carboxymethyl chitosan/amporphous calcium phosphate sebagai agen GTR dentin. Metode: Modifikasi CMC menjadi bubuk CMC/ACP (CA) melalui proses Freeze Dry dan modifikasi bubuk CA melalui proses milling 30 menit menjadi bubuk CMC/ACP paska milling (CAM) dan masing-masing dievaluasi menggunakan FTIR menganalisis gugus fungsi CMC dan gugus fungsi awal CA yang terbentuk. Bubuk CA dan CAM kemudian dicampurkan dengan gipsum hemihydrate pada rasio 5% dan 10% didapatkan kelompok novel semen CAG 5%, CAG 10%, CAMG 5% dan CAMG 10%. Kelompok tersebut dievaluasi menggunakan FTIR, XRD, SEM, setting time, ketahanan kompresi dan MTT assay. Novel semen tersebut diaplikasikan pada dentin terdemineralisasi selama 14 hari dan dievaluasi menggunakan TEM. Hasil: Gugus fungsi CMC berupa -CH2COOH dan N-H terlihat pada bubuk CA dan setelah dilakukan milling menjadi bubuk CAM. Tambahan gugus fungsi fosfat (-PO4) terlihat juga pada bubuk CA dan CAM. Gugus fungsi awal bubuk CA tetap terlihat pada bubuk CAM. Gugus fungsi fosfat (-PO4) terlihat juga pada kelompok novel semen CAG dan CAMG baik 5% dan 10%. Kombinasi bubuk CA dan CAM menggunakan gipsum mempengaruhi fasa mineral material. Kesan topografi berbeda pada novel semen CAG (5% dan 10%) dan novel semen CAMG (5% dan 10%). Terdapat perbedaan bermakna antara kelompok novel semen (CAG 5%, CAG 10%, CAMG 5% dan CAMG 10%) dibandingkan dengan gipsum (kontrol) pada setting time dan ketahanan kompresi (p<0.05). Viabilitas sel dari uji MTT assay menunjukkan novel semen CAMG 10% tidak toksik terhadap hDPSC. Novel semen CAG (5% dan 10%) dan novel semen CAMG (5% dan 10%) menunjukkan kesan remineralisasi dentin ekstrafibrillar dan intrafibrillar pada dentin terdemineralisasi. Kesimpulan: Modifikasi carboxymethyl chitosan melalui proses freeze dry dan milling serta pencampuran rasio 5% dan 10% menggunakan gipsum memiliki kemampuan untuk menginisiasi guided tissue remineralisazation dentin baik secara ekstrafibrillar dan intrafibrillar pada dentin terdemineralisasi.

Background: Guided Tissue Remineralization (GTR) dentin is used to increase the formation of nanocrystals in the gap zone area and build an apatite mineral structure in demineralized dentin collagen and Carboxymethyl Chitosan (CMC) which acts as a protein analog and triggers dentin remineralization. Objective: To obtain a novel carboxymethyl chitosan/amorphous calcium phosphate cement as a dentinal GTR agent.Purpose: Obtained novel cement carboxymethyl chitosan/amporphous calcium phosphate as an agent for GTR. Methods: Modification of CMC into CMC/ACP (CA) powder through the Freeze Dry process and modification of CA powder through a 30-minute milling process into CMC/ACP powder after milling (CAM) and evaluated using FTIR, respectively, analyzing the CMC functional group and the initial CA functional group formed. CA and CAM powder were then mixed with gypsum hemihydrate at a ratio of 5% and 10% to obtain novel cement groups of CAG 5%, CAG 10%, CAMG 5%, and CAMG 10%. The groups were evaluated using FTIR, XRD, SEM, setting time, compression resistance, and MTT assay. The novel cement was applied to demineralized dentin for 14 days and evaluated using TEM. Result: The CMC functional group (-CH2COOH and N-H) was seen in CA and CAM powder. Addition of phosphate (-PO4) functional grup were detected in CA and CAM powder. Phosphate (-PO4) functional group was seen in novel cement CAG (5% and 10%) and CAMG (5% and 10%). The combination of gipsum using CA and CAM powders produces different mineral phases. Topographical impressions differed between Novel cement groups of CAG (5% and 10%) and CAMG (5% and 10%). There was a significant difference between the novel cement groups (CAG 5%, CAG 10%, CAMG 5%, and CAMG 10%) compared to gypsum (control) in setting time and compression resistance (p<0.05). Viability cell confirmation using MTT assay showed that novel cemen group of CAMG 10% did not toxic to hDPSC. Novel cement groups of CAG (5% and 10%) and CAMG (5% and 10%) demonstrated the effects of extrafibrillar and intrafibrillar dentin remineralization on demineralized dentin. Conclusion: Modifying carboxymethyl chitosan through freeze dry and milling processes and modifying the mixing ratio of 5% and 10% using gypsum can initiate guided tissue remineralization of dentin both extrafibrillarly and intrafibrillarly in demineralized dentin."
Jakarta: Fakultas Kedokteran Gigi Univeritas Indonesia, 2022
D-pdf
UI - Disertasi Membership  Universitas Indonesia Library
cover
Permata Ayunda Putri
"Tulang merupakan salah satu penyusun sistem gerak manusia yang rentan mengalami kerusakan berupa fraktur akibat kecelakaan atau osteoporosis. Mekanisme remodeling tulang dapat membantu memperbaiki struktur tulang, namun bergantung pada kerusakannya. Rekayasa jaringan tulang, perancah, merupakan salah satu penyembuhan yang dapat digunakan untuk membantu regenerasi jaringan tulang. Perancah harus memiliki biokompatibilitas serta osteokonduktivitas yang baik. Biokeramik seperti hidroksiapatit (HAp) dan biphasic calcium phosphate (BCP) digunakan sebagai perancah karena strukturnya yang mirip tulang asli. Temulawak, Curcuma xanthorrhiza (CuX) merupakan tanaman obat yang dapat digunakan untuk meningkatkan sifat antiinflamasi pada perancah. Pada penelitian ini, kitosan (CS), hyaluronic acid (HA), dan ekstrak temulawak (CuX) digunakan sebagai material utama perancah dengan HAp dan BCP sebagai variasinya. Ekstraksi temulawak dilakukan dengan metode Soxhlet dan ekstraksi HAp dan BCP dilakukan dengan metode kalsinasi tulang ikan tuna pada suhu 600 °C dan 1000 °C. Ketiga perancah difabrikasi dengan metode freeze drying dan dikarakterisasi dengan uji viabilitas dan proliferasi sel. HAp dan BCP sebagai variabel bebas menghasilkan viabilitas sel yang lebih baik dibandingkan dengan perancah kontrol pada uji direct selama 4 hari. Namun, tingginya degradasi dari perancah mengakibatkan jumlah sel berkurang drastis dari pertama kali ditanam. Pada uji viabilitas indirect menggunakan MTT assay, HAp pada perancah mendukung viabilitas sel secara signifikan dibandingkan dengan BCP dan kontrol. Secara keseluruhan, ketiga variasi perancah berhasil menyediakan tempat bagi sel untuk hidup dan tidak beracun.

Bones are one of the musculoskeletal systems in humans which vulnerable to damage as fractures because of accidents or osteoporosis. The remodeling mechanism in bone may help to fix the bone structure, but it depends on the extent of the damage. Bone tissue engineering as a scaffold is one of the methods to help bone regeneration. Bone tissue engineering as a scaffold is one of the methods to help bone regeneration. Scaffold must have good biocompatibility and osteoconductivity. Bioceramics such as hydroxyapatite (HAp) and biphasic calcium phosphate are often used as scaffolds because their structure is similar to natural bone. Temulawak, or Curcuma xanthorrhiza (CuX), is a herbal plant that improves anti-inflammation. This study uses chitosan (CS), hyaluronic acid (HA), and temulawak extract (CuX) as the primary materials. This study uses extraction of temulawak using the Soxhlet method and extraction of HAp and BCP using calcination at 600 °C and 1000 °C. Scaffolds with the combination of CS/HA/CuX, CS/HA/CuX/HAp, and CS/HA/CuX/BCP fabricated using the freeze-drying method and characterized with proliferation and viability test. The HAp dan BCP as dependent variables generated better ability in the viability test than CS/HA/CuX scaffold on the direct test for four days. However, the high degradation from the sample yielded to loss of cells. For indirect tests using MTT assay, the addition of HAp in the scaffold showed better performance in the cell viability significantly more than BCP and control scaffolds. Overall, all scaffolds provided good places for the cell to live and showed non-toxic behavior towards the cells."
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Lucia Purwanti
"ABSTRAK
Karies adalah penyakit akibat infeksi mikrobiologi yang mengakibatkan kerusakan lokal pada jaringan gigi, dimulai dengan terjadinya demineralisasi jaringan keras diikuti dengan kerusakan bahan organik dalam gigi. Karies terjadi akibat peristiwa demineralisasi tanpa diimbangi dengan remineralisasi yang memadai. Dalam penelitian ini dibuat tooth solid (powder) spray dan tooth liquid spray dengan bahan aktif 10% w/w kompleks CPP ? ACP dan EEP, dengan variasi konsentrasi EEP 0%, 2% dan 4% w/w untuk menghambat demineralisasi email gigi. Tooth spray melalui pengujian organoleptik dan viskositas untuk mengontrol hasil sediaan. Kestabilan pH tooth spray diuji untuk menjaga kondisi tooth spray tetap berada di atas pH kritis. Kestabilan kandungan polifenol sebagai zat antibakteri yang berasal dari propolis diuji selama satu bulan untuk memastikan bioavailibilitas zat aktif dalam tooth spray. Hasil pengujian menunjukkan tooth spray memiliki aspek organoleptik dan viskositas yang memadai. Level pH dalam masing ? masing sediaan stabil di atas pH kritis rongga mulut (5.5), dengan range pH antara 6.5 ? 7.12. Kandungan polifenol masing ? masing tooth spray stabil dengan kandungan tertinggi dimiliki oleh tooth solid (powder) spray yang mengandung 4% EEP, yaitu 1.39 ? 1.45% w/w. Hasil pengujian morfologi gigi menggunakan SEM pasca aplikasi tooth spray menunjukkan seluruh formulasi tooth spray dapat memicu remineralisasi sehingga memiliki pengaruh menghambat demineralisasi gigi secara efektif dibanding kontrol negatif.

ABSTRACT
Dental caries is a disease caused by microbial infection that produce localized damage to the tissue classification. The process begins by demineralization in hard tissue, followed by damage of the organic material. Dental caries happens because of demineralization without balanced by remineralization. In this study, tooth powder spray and tooth liquid spray was made with active ingredients of 10% w/w CPP ACP and EEP, with variation of 0%, 2% and 4% w/w EEP in every preparation to inhibit demineralization. Each preparation should cross organoleptic and viscosity study to maintain the quality. pH of each preparations was evaluated to make sure each preparation has pH over the critical pH of oral environment. Polyphenol stability as the antibacterial agent was evaluated for a month to make sure its bioavailability in the preparations. The result shows that each preparations has enough organoleptic aspect and good viscosity. pH level in each preparations is stable above critical pH of mouth environment (5.5), it ranges between 6.5 ? 7.12. Polyphenol content in each preparations is stable with highest polyphenol content is in tooth powder spray with 4% EEP, i.e. 1.39 ? 1.45%. w/w. Qualitative evaluation of tooth morphology by SEM shows that preparations can inhibit enamel demineralization respectively, relative to negative control."
2016
S65576
UI - Skripsi Membership  Universitas Indonesia Library
cover
Siti Julia
"Tulang merupakan komposit kolagen dan mineral. Kolagen bersifat elastis bertindak sebagai matriks pada tulang. Adapun hidroksiapatit (HA) memiliki modulus elastis tinggi, bersifat rapuh, berikatan kimia dengan kolagen, memberi sifat kaku dan kuat pada tulang. Pembuatan biokomposit dengan fraksi volume kolagen dan orientasi serat matriks yang bervariasi akan dapat diproduksi suatu komposit ringan yang memiliki kekuatan tinggi dengan sifat anisotropi seperti tulang alami. Dalam penelitian ini, dilakukan pembentukan komposit dengan komponen kalsium fosfat dan kolagen. Kolagen diisolasi dari beberapa sumber limbah antara lain; limbah ikan dan limbah ayam.
Berdasarkan hasil uji protein kasar, FTIR, dan SEM menunjukkan bahwa limbah ayam memiliki potensi untuk menjadi sumber alternatif dari produksi kolagen. Metode iradiasi gelombang mikro pada sintesis kalsium fosfat, menghasilkan kemurnian hasil dengan ketepatan nilai parameter kisi bernilai diatas 99% untuk kedua variasi (sintering dan tanpa sintering). HA sintering memiliki indeks kristalinitas yang lebih tinggi dari tulang manusia (3.23>0.33). Namun, HA non-sintering memiliki indeks kristalinitas pada rentang indeks kristalinitas tulang manusia.
Sintesis komposit apatit kolagen dengan metode presipitasi ek situ telah berhasil dilakukan. Berdasarkan karakteristik fisik yang dilakukan menunjukkan bahwa pada semua masa rasio komposit memperlihatkan deposisi kristal HA pada permukaan kolagen. Studi pendahuluan ini akan bermanfaat untuk studi pembentukan komposit kalsium fosfat/kolagen sebagai bioamterial.

Bone is a composite of collagen and minerals. Collagen is an elastic material that acts as a matrix of bone. The hydroxyapatite (HA) has a high elastic modulus, and brittle. The combination chemically of collagen on HA gives a strong and rigid nature to the bone. The production of bio-composites with varying collagen volume fraction and matrix fiber orientation will produce a lightweight composite that has high strength with anisotropic properties such as natural bone. In this study, composites were formed with calcium phosphate and collagen components. Collagen was isolated from three sources of waste including; goramy fish scale, the cuticle of chicken feet and the inner layer of chicken gizzard.
Based on the crude protein analysis, FTIR, and SEM revealed that the inner layer of the chicken gizzard was potential to be an alternative source of collagen production. Microwave irradiation technique produced the purity of results with the accuracy of the lattice parameter above 99% for both variations (sintering and without sintering). Sintered HA had a higher crystallinity index than the human bone (3.23 > 0.33). But, the unsintered HA had the crystallinity index at the range of human bone`s crystallinity index.
The synthesis of apatite collagen composite with precipitation method was successfully carried out. The SEM examination showed the deposition of apatite crystals on the surface of collagen. Based on the all physical characterization revealed that all of the ratio mass of the composites the heterogenous strongly adhered throughout the collagen surface. The preliminary study will be beneficial for leading the formation of composites of collagen/HA as biomaterials.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
T53506
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>