Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 165780 dokumen yang sesuai dengan query
cover
Marpaung, Antonio Nathan Bulangan
"Flotasi merupakan suatu pemisahan zat atau unsur kimiawi pada partikel di dalam cairan/larutan memanfaatkan gelembung sebagai teknologi terbaharukan. Partikel yang bersifat hidrofilik karena pengaruh reagent akan berinteraksi pada gelembung udara dan akan terbawa ke permukaan larutan. Tidak hanya itu, agregat ini kemudian bergerak dengan vektor yang fluktuatif karena sifat gelembung yang bergolak dengan kacau. Pengaruh gelembung yang bergerak atau dinamis dari nozzle akan menghasilkan perubahan profil aliran di kisaran gelembung, sehingga agregat yang terletak, khususnya di bagian atas dan bawah gelembung akan terganggu oleh vortex di sekitar gelembung. Namun arah aliran dari fluida yang terbentuk dari vortex pada partikel dapat mengacaukan proses pelekatan partikel pada gelembung Dalam proses simulasi, nilai kecepatan aliran di bagian atas partikel berkisar antara 51.5 ? 54.2 mm/s dimana valid dengan kecepatan gelembung yang berkisar 35 ? 37 mm/s. Tidak hanya itu, arah vektor fluida yang ditunjukkan pada hasil simulasi menggunakan Computational Fluid Dynamic menunjukkan besarnya perilaku untuk partikel menggelinding (rolling), meluncur (sliding) atau bertumbuk (bouncing) ke arah samping baik kiri maupun kanan. Selain itu, bentuk partikel juga dapat merubah profil medan aliran kisaran gelembung sehingga pergerakan gelembung akan membentuk profil yang diakibatkan adanya partikel yang melekat pada gelembung.

Flotation is a separation of a substance or chemical elements in the particles in fluid / solution utilizing the bubble as renewable technologies. Particles hydrophilic due to the influence of reagent will interact on air bubbles and will carried to the surface of the solution. Not only that, the aggregate is then moved by the vector fluctuating due to the volatile nature of the chaotic bubbles. The influence of bubbles moving or dynamic of the nozzle will produce a change in the flow profile in the range of bubbles, so that the aggregate located, especially at the top and bottom of the bubble will be disturbed by the vortex around the bubble. But the direction of flow of the fluid formed of the vortex in the particle can disrupt the process of attachment of particles on the bubble in the simulation process, the value of the flow velocity at the top of the particles ranging between 51.5 - 54.2 mm / s where the bubbles are valid at speeds ranging from 35-37 mm / s. Not only that, the direction vector fluid shown in the simulation results using Computational Fluid Dynamic shows the behavior of the particles rolling (rolling), sliding (sliding) or fight (bounces) in the direction of either left or right side. In addition, particle shape as well can alter the flow field profile so that the range of movement of the bubbles will bubble forming a profile that caused the particles are attached to the bubble."
Depok: Fakultas Teknik Universitas Indonesia, 2015
T45319
UI - Tesis Membership  Universitas Indonesia Library
cover
Tsaabita Nabila Rifqa
"Penggunaan sediaan deksametason dan deksklorfeniramin maleat cukup tinggi. Namun, sediaan dalam bentuk cair memiliki stabilitas yang buruk. Hal ini penting untuk mengetahui beyond use date (BUD) atau batas waktu penggunaan pada sediaan tersebut untuk menjamin keamanan produk. Penelitian ini bertujuan menunjukkan kondisi analisis yang optimal dan menentukan BUD sirup deksametason dan deksklorfeniramin maleat dengan metode KCKT fase terbalik. Kondisi optimal untuk analisis dicapai pada kondisi isokratik menggunakan campuran air-asetonitril (30:70 v/v) sebagai fase gerak dengan panjang gelombang detektor 262 nm, laju alir fase gerak 1 mL/menit, dan volume injeksi sampel sebesar 20 μL, dan Waters® Spherisorb ODS2 C18 (250 × 4,6 mm, 5 μm) digunakan sebagai kolom. Uji penetapan kadar dilakukan dengan menganalisis standar dan sampel yang disimpan pada suhu 30oC selama 39 hari. Penentuan BUD dalam sampel berdasarkan t90 dari semua sampel yang dianalisis. Waktu retensi untuk deksametason pada 21,153 menit dan deksklorfeniramin maleat pada 3,442 menit. Metode analisis yang digunakan dalam penelitian ini menunjukkan hasil yang linier dengan koefisien korelasi untuk deksametason dan dekklorfeniramin maleat masing-masing sebesar 0,9997 dan 0,9992. Hasil uji akurasi diperoleh sebesar 101,0193-101,5551% untuk deksametason dan 99,6533-101,1556% untuk deksklorfeniramin maleat dengan KV ≤2%. Serta, nilai LOD dan LOQ untuk deksametason sebesar 0,6824 dan 2,0678 μg/mL. Sedangkan, deksklorfeniramin memiliki nilai LOD dan LOQ adalah 4,8766 dan 14,7760 μg/mL. Metode ini sepenuhnya divalidasi sesuai dengan persyaratan pedoman ICH didapat BUD pada sampel A dan B berturut-turut adalah 6 hari dan 48 hari. Sedangkan, secara fisik, sediaan sirup mengalami penurunan intensitas warna dan bau selama masa penyimpanan.

The usage of dexamethasone (DXM) and dexchlorpheniramine maleate (DCM) dosage forms is quite high. However, preparations in liquid form have poor stability. It is important to know these preparations beyond use date (BUD) to ensure product safety. The study aims to show the optimal condition of analysis and determine the BUD of DXM-DCM syrup with RP-HPLC methods. The best separation of the analytes was achieved under isocratic conditions using water-acetonitrile (30:70) as mobile phase, detector wavelength of 262 nm, 1 mL/min of flow rate, 20 μL of injection volume, and Waters® Spherisorb ODS2 C18 (250 x 4,6 mm, 5 μm) column. The DXM-DCM were determined by analyzing the samples stored for 39 days (30oC). The determination of BUD is based on the t90. The retention time of DXM-DCM were 21,153 and 3,442 minutes. The analytical methods have shown a linear result r value for DXM-DCM with the amount of 0.9997 and 0.9992 respectively. The accuracy of this method had justified by the recovery of 101,0193-101,5551% for DXM and 99,6533-101,1556% for DCM with CV ≤2%. The LOD and LOQ for DXM were 0,6824 and 2,8766 μg/mL. Furthermore, DCM was detected with LOD value of 2,0678 μg/mL and LOD value of 14,7760 μg/mL. The method was fully validated according to the requirements of ICH guidelines. The results of BUD in samples A and B were 6 and 48 days. Meanwhile, as a result of physical stability, the syrup showed a decrease in color and odor intensity during the storage period."
Depok: Fakultas Farmasi Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Niken Harimurti
"Sistem nanoemulsi ganda air-minyak-air (w/o/w) merupakan dispersi emulsi tunggal air-minyak (w/o) dalam air sebagai fasa eksternal. Beberapa tahun terakhir ini, sistem nanoemulsi ganda mulai banyak dikembangkan dalam industri nutrasetikal dengan mempertimbangkan keunggulannya dalam melindungi dan mengenkapsulasi senyawa bioaktif yang larut dalam air maupun dalam minyak, serta melepaskan dan menghantarkannya dalam sistem pencernaan tubuh. Pada penelitian ini dikembangkan suatu sistem nanoemulsi w/o/w yang dimuati oleh komponen bioaktif betasianin dari ekstrak naga merah dan kurkumin dari ekstrak temulawak yang memiliki kesamaan sifat fungsional sebagai antioksidan. Pemuatan senyawa hidrofilik dan hidrofobik secara bersamaan dalam sistem nanoemulsi w/o/w diharapkan lebih meningkatkan sifat fungsionalnya.
Tujuan dari penelitian ini adalah untuk mendapatkan nanoemulsi w/o/w yang stabil dan dapat menghantarkan betasianin sebagai senyawa bioaktif hidrofilik dan kurkumin sebagai senyawa bioaktif hidrofobik. Emulsifikasi dua tahap dilakukan dengan menggunakan tiga cara: ultraturrax – high pressure homogenizer (HPH), HPH - HPH, dan ultrasonic – HPH. Adapun yang menjadi variabel bebas dalam penelitian ini adalah konsentrasi emulsi w/o dan konsentrasi surfaktan Tween 80.
Nanoemulsi ganda yang dimuati ekstrak jahe dan ekstrak buah naga merah, dipreparasi menggunakan HPH–HPH dengan konsentrasi emulsi w/o 25% b/b dan Tween 80 2,2% b/b terpilih sebagai formula terbaik dengan karakteristik: diameter droplet 201 nm, PDI 0,17, potensial zeta -37 mV dan fasa minyak terpisah dari nanoemulsi 14% v/v. Nanoemulsi ekstrak jahe dan buah naga merah dengan konsentrasi kurkumin 7–121 µg/mL dan konsentrasi betasianin 4–7 µg/mL, memberikan nilai penangkap radikal bebas (IC50) 931–1179 µg/mL, efisiensi enkapsulasi kurkumin 88–97% dan betasianin 97–98%, serta bioaksesibilitas kurkumin 44–72% dan betasianin 35–65%.
Nanoemulsi ganda yang dimuati ekstrak temulawak dan ekstrak buah naga merah, dipreparasi menggunakan ultraturrax–HPH dengan konsentrasi emulsi w/o 15% b/b dan Tween 80 1,5% b/b merupakan formula terbaik dengan karakteristik: diameter droplet 189 nm, PDI 0,16, potensial zeta -32 mV dan fasa minyak terpisah dari nanoemulsi 5% v/v. Nanoemulsi ekstrak temulawak dan buah naga merah dengan konsentrasi kurkumin 807–2246 µg/mL dan konsentrasi betasianin 3–7 µg/mL, memeberikan IC50 908–1074 µg/mL, efisiensi enkapsulasi kurkumin 88–97% dan betasianin 97–98%, serta bioaksesibilitas kurkumin 44–72% dan betasianin 35–65%.
Konsentrasi senyawa kurkumin dalam ekstrak temulawak, ekstrak jahe dan betasianin dalam ekstrak buah naga merah berturut-turut adalah 32,3%, 1,9% dan 0,1% b/b. Berdasarkan nilai IC50, aktivitas ekstrak temulawak (92 µg/mL) lebih rendah dari vitamin C (4 µg/mL), dan lebih besar daripada ekstrak jahe (431 µg/mL) dan ekstrak buah naga merah (1504 µg/mL). Dapat disimpulkan bahwa ekstrak temulawak dan ekstrak buah naga merah dengan konsentrasi senyawa bioaktif total rendah dalam nanoemulsi ganda w/o/w (0,2%–0,7% b/b), memberikan nilai IC50 9–12 kali lebih besar dari IC50 ekstrak temulawak dan buah naga merah dalam bentuk alami. Hasil uji toksisitas akut terhadap hewan mencit jantan dan betina menunjukkan bahwa nanoemulsi ganda ekstrak temulawak dan ekstrak buah naga merah tidak menyebabkan toksisitas akut yang berbahaya, sehingga nanoemulsi ganda ini aman dan berpotensi sebagai produk tengahan pangan fungsional.

The water-in-oil-in-water (w/o/w) double nanoemulsion system is a water-in-oil (w/o) single emulsion dispersion in an external water phase. In recent years, double nanoemulsion systems have been developed in the nutraceutical industry due to their advantages in protecting and encapsulating bioactive compounds that are soluble in water and in oil, as well as releasing and delivering them in the digestive system of the body. Water-in-oil-in-water nanoemulsion formulations loaded with bioactive compounds having antioxidant properties, betacyanin from red dragon fruit extract and curcumin from ginger extract, have been developed in this study. The simultaneous encapsulation of hydrophilic and hydrophobic bioactive compounds in a w/o/w nanoemulsion system is expected to further improve their functional properties.
The aim of this study was to obtain the most stable w/o/w nanoemulsion that could simultaneously encapsulate and deliver betacyanin and curcumin, a hydrophilic and a hydrophobic bioactive compound, respectively. The two-stage emulsification was carried out using three homogenization methods: ultraturrax–high pressure homogenizer (HPH), HPH–HPH, and ultrasonic–HPH. The independent variables in this study were the w/o emulsion concentration and the Tween 80 surfactant concentration.
The double nanoemulsion loaded with ginger extract and red dragon fruit extract prepared using the HPH–HPH method with a w/o emulsion concentration of 25% w/w and a Tween 80 concentration of 2% w/w was found to be the formulation with the least oil phase separation of 14% v/v. This nanoemulsion had a mean droplet diameter of 201 nm, PDI of 0.17, zeta potential of -37 mV, bioactive concentration of 72–121 µg/mL (curcumin) and 4–7 µg/mL (betacyanin), encapsulation efficiency of 88–97% (curcumin) and 97–98% (betacyanin), bioaccessibility of 44–72% (curcumin) and 35–65% (betacyanin), and, free radical scavenger value (IC50) value of 931–1179 µg/mL.
The double nanoemulsion loaded with temulawak extract and red dragon fruit extract prepared using the ultraturrax–HPH method with a w/o emulsion concentration of 15% w/w and a Tween 80 concentration of 1.5% w/w was found to be the the most stable formulation overall with oil phase separation of only 5% v/v. This double nanoemulsion had a mean droplet diameter of 189 nm, PDI of 0.16, zeta potential of -32 mV, bioactive concentration of 807–2246 µg/mL (curcumin) and 3–7 µg/mL (betacyanin), encapsulation efficiency of 88–97% (curcumin) and 97–98% (betacyanin), bioaccessibility of 44–72% (curcumin) and 35–65% (betacyanin), and, IC50 value of 908–1074 µg/mL.
The concentration of curcumin in ginger extract, ginger extract and betacyanin in red dragon fruit extract were 32.3%, 1.9% and 0.1% w/w, respectively. Based on the IC50 value, the activity of the temulawak extract (92 µg/mL) was higher than those of ginger extract (431 µg/mL) and red dragon fruit extract (1504 µg/mL), although it still lower than that of vitamin C (4 µg/mL). It can be concluded that ginger extract and red dragon fruit extract with a low total concentration of bioactive compounds in the double nanoemulsion (0.2%–0.7% w/w) gave IC50 value 9–12 times greater than the IC50 values of the extract in their natural form. The results of the in-vivo acute toxicity test on male and female mice showed that the double nanoemulsion of temulawak extract and red dragon fruit extract did not cause acute toxicity. Therefore, this double nanoemulsion is shown to safe and has the potential to be used as a functional food intermediate product.
"
Depok: Fakultas Teknik Universitas Indonesia, 2021
D-pdf
UI - Disertasi Membership  Universitas Indonesia Library
cover
David Kristianto
"ABSTRAK
Penyakit yang disebabkan oleh vektor nyamuk masih sering terjadi di Indonesia, terutama demam berdarah dengue. Penggunaan minyak cengkeh yang dienkapsulasi berpotensi sebagai insektisida alami yang aman bagi penggunanya. Pemilihan kain sebagai media pengaplikasian, dikarenakan susunan serat kain yang sesuai, serta permukaan kain yang bersifat polar sehingga dapat dimodifikasi dengan TiO2 untuk menghadirkan kemampuan swabersih. Penelitian yang telah dilakukan bertujuan untuk memperoleh loading optimum dari dopan CuO pada TiO2 sebagai upaya meningkatkan performa fotokatalis TiO2, serta mendapatkan kain dengan kemampuan swabersih dan antinyamuk yang optimum. Proses deposisi dopan dilakukan dengan metode Photo Assisted Deposition (PAD) yang dilanjutkan dengan kalsinasi. Karakterisasi yang dilakukan pada komposit CuO/TiO2 adalah SEM-EDX dan UV-Vis DRS, sementara karakterisasi yang dilakukan pada kain yang termodifikasi minyak cengkeh-CuO/TiO­2 adalah FTIR dan GC-FID. Uji kinerja yang dilakukan pada komposit CuO/TiO2 adalah degradasi metilen biru, serta uji kinerja swabersih terhadap lumpur dan kemampuan antinyamuk pada kain termodifikasi minyak cengkeh-CuO/TiO2. Hasil SEM menunjukkan bahwa jumlah agregat yang lebih banyak ditemukan sampel CuO/TiO2 dibandingkan TiO2. Kemudian, hasil UV-Vis DRS menunjukkan bahwa keberadaan dopan CuO dapat menurungkan band-gap energy. Hasil tersebut dibuktikan dengan meningkatnya aktivitas fotokatalitik pada sampel 3%CuO/TiO2 yang optimum dalam mendegradasi metilen biru mencapai 95% dalam waktu irradiasi 30 menit. Di sisi lain, sampel katun 38%MC-3%CuO/TiO2 memiliki persentase kemampuan swabersih sebesar 83% terhadap lumpur, karena keberadaan dopan CuO yang meningkatkan jumlah oxygen vacancies dan terdeteksinya ikatan Ti-O-Si pada karakterisasi FTIR sehingga kain yang termodifikasi semakin bersifat hidrofilik. Kemampuan antinyamuk yang optimum diperoleh pada sampel 38%MC-3%CuO/TiO2 dengan rata-rata jumlah nyamuk yang hinggap terkecil, yaitu 4, serta didukung oleh hasil GC-FID dan ikatan aromatik C=C pada FTIR yang menunjukkan adanya eugenol sebagai agen antinyamuk.

ABSTRACT
Diseases that are caused by the mosquito as the vector still often happens in Indonesia, especially dengue hemorrhagic fever. The application of encapsulated clove oil is potentially becoming a natural insecticide without any negative side effects. This research chose cotton fabric as application media due to the suitable fiber structure and the polarity of fabric surface which can be developed by TiO2 to produce self-cleaning properties. The purposes of the research are to get the optimum loading of CuO on TiO­2 to improve photocatalytic performance and producing cotton fabric with optimum self-cleaning and anti-mosquito performances. The dopant deposition process is carried out using the Photo Assisted Deposition (PAD) method, followed by calcination. Characterizations of CuO/TiO2 composite are SEM-EDX and UV-Vis DRS, while on modified cotton by clove oil-CuO/TiO2 composite are FTIR and GC-FID. The performance tests that have been done are degradation organic compound which is modeled by methylene blue for CuO/TiO2 composite and self-cleaning performance test using sludge and anti-mosquito performance for modified cotton with clove oil-CuO/TiO2 composite. SEM results show the morphological differences between CuO/TiO2 and TiO2 are the amount of aggregate, which CuO/TiO2 has higher amount of aggregate. Then, UV-Vis DRS shows the presence of dopant CuO can lower band-gap energy. The result is also confirmed by the increased photocatalytic activity in 3%CuO/TiO2 sample which is optimum in degrading methylene blue reaching 95% in 30 minutes irradiation. This is also in line with the results of the performance of self-cleaning to sludge with a percentage of self-cleaning ability by 83% for cotton 38%MC-3%CuO/TiO2 sample because the existence of CuO dopant which increases the number of oxygen vacancies and Ti-O-Si bond is detected using FTIR, so the modified fabric is increasingly hydrophilic. The optimum anti-mosquito performance is obtained in cotton 38%MC-3%CuO/TiO2 sample with the smallest average of mosquitoes perched at amount of 4, and supported by GC-FID results and aromatic C=C bond in FTIR results that confirm the existence of eugenol as an anti-mosquito agent."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Siregar, Sahala David
"Pada proses flotasi terdapat 3 sub-proses penting, yaitu penipisan interverensi dari lapisan fluida menjadi ketebalan kritis, pecahnya lapisan liquid terinterverensi dan pembentukan formasi kontak tiga fasa, serta ekspansi garis kontak tiga fasa mencapai kestabilan agregat. Kestabilan agregat menentukan keberhasilan proses separasi. Kestabilan agregat ditentukan oleh beberapa faktor yaitu reagent, geometri dan ukuran partikel.
Penelitian ini bertujuan untuk memahami pengaruh geometri dan ukuran partikel terhadap stabilitas agregat. Eksperimental setup terdiri dari kolom flotasi dengan ukuran 9x9x26 cm dilengkapi dengan bubble generator, particle feeding system, dan video kamera berkecepatan tinggi (high speed video camera). Bubble generator berupa single nozzle berdiamater 0,3 mm yang dihubungkan ke programmable syringe pump. Particle feeding system terbuat dari pipet. Partikel yang digunakan dalam penelitian ini adalah partikel hasil tambang tembaga dengan bentuk sub-angular dengan ukuran antara 38-300 μm. Hasil rekaman high speed video camera diolah dan dianalisa dengan menggunakan image processing software. Hasil penelitian diharapkan akan menambah pemahaman pengaruh geometri dan ukuran partikel pada interaksi bubble-particle khususnya stabilitas agregat.
Hasil eksperimen menunjukkan stabilitas agrgegat bubble-partikel dan waktu induksi (waktu partikel melekat pada bubble) dipengaruhi oleh ukuran partikel. Semakin kecil ukuran partikel, semakin besar probabilitas terbentuk agregat yang stabil dan semakin panjang waktu induki. Partikel berukuran 38 𝜇m, 45 μm, 75 μm, 106 μm mamapu membentuk agregat stabil sehingga melekat pada gelembung. Sedangkan, partikel berukuran 150 μm dan 300 μm tidak mampu membentuk agregat stabil sehingga tidak melekat pada gelembung.

There are three sub-proces on flotation. These processes are intervening liquid film intu critical thickness, rupture of liquid film forming three phase contact line, and expansion three phase contact line forming agregate stability. Agregate stability determines flotation efficiency. Agregate stability has some important factors such as reagent and particle geometry.
This research focus on understanding effect of particle geometry to agregate stability. Experimental setup consists of 9x9x26 cm flotation coloumn made of glass, bubble generator, particle feeding system, and high speed video camera. Bubble generator made from single nozzle with 0,3 mm diameter attached to programmable syringe pump. Particle feeding system made of pipette. Particle used in this research is taken from open pit Grasberg in timika, Papua. Parcile has sub-angular size and varies between 38-300 μm. Recordings from high speed video camera analyzed using image processing software.
Experiment result shows thet agregate particle-bubble and induction time depends on particle size. The smaller particle size, the higher probability attachment, agregate stability, and iduction time. Particle with size 38 𝜇m, 45 μm, 75 μm, 106 μm able to form stable agregate. While, particle with size 150 μm and 300 μm unable to form stable agregate.
"
Depok: Fakultas Teknik Universitas Indonesia, 2015
T44600
UI - Tesis Membership  Universitas Indonesia Library
cover
Destrianti Syamzida
"Teknologi gelembung mikro memiliki tingkat efisiensi yang tinggi pada proses flotasi dan aerasi untuk Instalasi Pengolahan Air (IPA) yang telah digunakan di banyak negara maju. Di Indonesia sendiri penerapannya baru pada sektor perikanan dan lab industri skala kecil. Beberapa institusi seperti Indonesia Water Institute (IWI) telah mencoba meneliti gelembung mikro yang diperuntukkan untuk IPA. Namun, sistem reaktor yang ada saat ini belum mencapai kriteria gelembung mikro, terlebih lagi investigasi alat tersebut terhadap kemampuannya dalam proses flotasi dan areasi belum dilakukan. Oleh karena itu, pengembangan sistem reaktor serta investigasi pengaruh dari kemampuan flotasi (kecepatan naik gelembung) dengan variasi ukuran gelembung serta kemampuan aerasi (waktu kontak perpindahan oksigen) dengan variasi koefisien transfer massa (KLa) dari berbagai sparger lokal dilakukan. Tindakan untuk pengembangan sistem reaktor adalah dengan meningkatkan kapasitas pompa dan kompresor, serta melakukan variasi debit air dan debit udara untuk diobservasi gelembung mikro terkecilnya. Metode untuk menganalisis kemampuan sparger adalah dengan menggunakan 3 sparger lokal, dimana  gelembung diukur secara optik (dan dianalisis gambar dengan software ImageJ) dan pengukuran konsentrasi DO setiap menitnya untuk menghasilkan ukuran gelembung dan KLa. Dari ketiga sparger, ukuran gelembung terkecil dihasilkan oleh sparger vortex yaitu 89 m. Hal ini berdampak pada hasil kecepatan naik terbaik nilai 17,67 m/h. Sparger vortex juga menghasilkan serta KLa tertinggi dengan nilai 0,297/min yang berdampak pada waktu kontak tercepat yaitu 3,64 menit dalam absorpsi gas ke dalam larutan. Berdasarkan hasil tersebut, sparger lokal ini memiliki kemampuan yang masuk ke dalam kriteria desain unit flotasi dan aerasi. Oleh karena itu, teknologi gelembung mikro dengan eksperimen skala lab untuk ketiga sparger dapat menjadi acuan dalam perkembangan teknologi mikro pada IPA di Indonesia.

Microbubble technology has a high level of efficiency in the process of flotation and aeration for Water Treatment Plants (WTP) and has been used in many developed countries. In Indonesia, this technology is not optimally utilized yet, only to fisheries and small-scale industrial laboratories. Although several institutions such as the Indonesian Water Intitute (IWI) have tried to evaluate microbubble technology for WTP but the current reactor system has not yet reached the microbubble criteria. In addition, there remains a significant gap in knowledge and research on microbubble local sparger manufacturers and their capabilities for WTP. Therefore, the development of the reactor system and the investigation of flotation ability (rising velocity) with variations in bubble size and aeration ability (oxygen transfer contact time) with variation in transfer coefficient (KLa) of various local spargers were carried out. To develop the reactor system, the capacity of pumps and compressor were increased, and variation in water & air discharge were carried out until the ideal microbubbles size were obtained. The method for analyzing sparger ability is to use 3 local spargers, where bubbles are measured optically (and analyzed with ImageJ) and measurement of DO concentration every minute produce bubble and KLa sizes. Of the three spargers, the smallest bubble size was produced by sparger vortex, which was 89 μm. This has an impact on the results of the best rising velocity 17,37 m/h. Sparger vortex also produced the highest KLa with a value of 0,297/min which had the fastest contact time of 3,64 minutes in gas absorption into the solution. Based on these results, these local spargers have capabilities that fall into the flotation and aeration unit design criteria. Therefore, these three spargers of microbubble technology lab-scale experiments can be a reference in the development of microbubble technology for WTP in Indonesia."
Depok: Fakultas Teknik Universitas Indonesia , 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Tarigan, Epin Yunanta
"Rabeprazol merupakan obat golongan penghambat pompa proton yang digunakan untuk pengobatan refluks gastroesophageal. Konsentrasinya sangat kecil dalam plasma sehingga diperlukan metode analisis yang sensitif, selektif, dan akurat. Pada penelitian ini, dilakukan optimasi dan validasi metode analisis rabeprazol dalam plasma in vitro menggunakan kromatografi cair kinerja tinggi UV-Vis dengan pantoprazol sebagai baku dalam. Pemisahan menggunakan kolom Kromasil® C18, 100-5, (4,6 × 250 mm, 5 μm) dengan fase gerak isokratik yang terdiri dari 50 mM natrium dihidrogen fosfat pH 7,2 - asetonitril (55:45, v/v). laju alir 0,5 mL/menit dan dideteksi pada panjang gelombang 294 nm. Waktu retensi rabeprazol dan pantoprazol adalah 8,7 dan 9,8 menit dengan total waktu analisis adalah 12 menit. Sampel plasma (500 μL) diekstraksi menggunakan dietil eter-diklorometan (90:10, v/v).
Metode ini spesifik karena tidak adanya puncak pengganggu plasma pada waktu retensi analit dan baku dalam. Metode ini valid dan linear pada rentang konsentrasi 10,08 - 1008,00 ng/mL dengan LLOQ 10,0 ng/mL (n = 6, koefisien variasi (KV) = 3,16%). Nilai % diff dan koefisien variasi untuk akurasi dan presisi intra hari dan antar hari tidak lebih dari 15%. Nilai perolehan kembali absolut dari rabeprazol sebesar 76 - 87% (KV = 6,54%) dan baku dalam sebesar 74% (KV = 3,13%). Rabeprazol dalam plasma dinyatakan stabil selama minimal 1 bulan pada suhu -20°C dan -80°C, stabil selama minimal 12 jam pada suhu kamar. Rabeprazol dinyatakan stabil selama 3 siklus beku dan cair. Metode ini memenuhi kriteria penerimaan seperti pada pedoman USFDA dan bisa diaplikasikan untuk analisis rabeprazol dalam plasma in vivo.

Rabeprazole is a proton-pump inhibitor, used in gastroesophageal reflux treatment. Its concentration is very small in human plasma, so it requires a sensitive, selective, and accurate method of analysis. In this study, carried out optimization and validation of rabeprazole analysis in human plasma using high performance liquid chromatography UV-Vis using pantoprazole as internal standard. Separation was performed on Kromasil® 100-5 C18, (4.6 × 250 mm, 5μm) column with an isocratic mobile phase composed of 50 mM sodium dihydrogen phosphate pH 7.2 - acetonitrile (55:45, v/v), flow rate at 0.5 mL/min and was detected at 294 nm. Retention time of rabeprazole and pantoprazole were 8.7 and 9.8 minutes and total analytical run time was 12 minutes. Plasma sample (500 μL) was extracted with diethyl eter - dichloromethane (90:10, v/v).
The method was specific as there were no interfering peaks of human plasma eluting at the retention times of the rabeprazole and the internal standard. The method was valid and linear within the concentration ranges of 10.08-1008.00 ng/mL with LLOQ 10,0 ng/mL (n = 6, coefficient variation (CV) = 3.16%). Intra-day and inter-day accuracy and precision was not more than 15% in both % diff and coefficient of variation. Absolute recovery were 76-87% (CV = 6.54%) for rabeprazole and 74% (CV = 3.13%) for internal standard. Rabeprazole was stable in human plasma for at least 1 month at -20°C and -80°C, and for 12 h at room temperature. Rabeprazole were stable to three freeze thaw cycles. This method also fulfil the acceptance criteria following USFDA guidelines and suitable to be applied for analysis of rabeprazole in human plasma.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2012
S43652
UI - Skripsi Open  Universitas Indonesia Library
cover
Indra Pranata Al Kautsar
"Penelitian mengenai Pengaruh Pine Oil Terhadap Dinamika Bubble Pada Froth Flotation bertujuan untuk mempelajari efek yang ditimbulkan oleh pine oil terhadap dinamika bubble dalam froth flotasi. Penelitian ini memvariasikan nozzle udara dan konsentrasi pine oil dalam kolom pengamatan. Test section berupa udara yang berasal dari air pump, kemudian dialirkan kedalam kolom melalui nozzle. Data berbentuk video diolah menggunakan software Image J. Dari penelitian ini dapat disimpulkan bahwa pine oil yang dilarutkan kedalam medium, memiliki pengaruh terhadap dinamika bubble yang dihasilkan, seperti ukuran bubble, kecepatan maksimum, dan terminal velocity.

Research on Effect of pine oil To Bubble Dynamics in Froth Flotation aims to study the effects of pine oil on bubble dynamics in the froth flotation system. The research varying the air nozzle and the concentration of pine oil in the field of observation. Air coming from the water pump, then flowed into the column through a nozzle. Video datas processed using software Image J. This research conclude that pine oil dissolved into the medium, has an influence on the resulting bubble dynamics, such as bubble size, maximum speed, and terminal velocity."
Depok: Fakultas Teknik Universitas Indonesia, 2012
S42669
UI - Skripsi Open  Universitas Indonesia Library
cover
Nurrohman
"Limbah Batik dapat menaikkan kekeruhan, warna dan Total Suspended Solid (TSS) cairan yang terkontaminasi olehnya, sehingga diperlukan suatu teknik untuk memisahkan limbah Batik dari cairan agar kekeruhan, warna dan TSS cairan menurun. Telah dilakukan penelitian flotasi menggunakan elektrolisis untuk pemisahan limbah pewarna sintetik hasil pewarnaan Batik. Penelitian dilakukan dengan elektrolisis dengan elektroda stainless steel 316L, di dalam sebuah pipa akrilik dengan tinggi 100 cm, dan diameter dalam 8,4 cm dengan variasi tegangan 10, 15 dan 20 volt. Tawas sebagai reagen untuk menggumpalkan limbah Batik ditambahkan sebanyak 1 gram tiap 10 mL limbah Batik. Limbah Batik dicampur terlebih dahulu dengan aquades. Frother yang digunakan adalah etanol murni sebanyak 0,1% v/v. Dari hasil penelitian ditemukan bahwa flotasi limbah Batik dapat digunakan untuk pemisahan limbah Batik dengan penambahan tawas terlebih dahulu untuk menggumpalkan limbah Batik. Tawas terbukti mampu berperan seperti collector dalam pemisahan limbah Batik jenis ini. Etanol sebagai frother yang digunakan terbukti mampu membuat froth yang terbentuk stabil dan menaikan efisiensi pemisahan.

Batik waste can increase turbidity, color and Total Suspended Solid (TSS) of a liquid contaminated by it, so we need a technique for separating Batik from the liquid so that its turbidity, color and TSS decrease. Flotation studies have been conducted using electrolysis to produce the bubbles to separate synthetic dye waste result of Batik staining. Research carried out by electrolysis with 316L stainless steel electrodes, inside an acrylic pipe with a height of 100 cm, and 8,4 cm in diameter with a voltage variation of 10, 15 and 20 volts. Alum as a reagent is added to coagulate Batik waste as much as 1 gram per 10 mL of Batik waste. Batik waste mixed with distilled water beforehand. Frother used was pure ethanol as much as 0.1% v/v. From the research it was discovered that waste flotation Batik can be used for waste separation Batik with the addition of alum to coagulate prior Batik waste. Alum proved capable of acting as collector in this type of waste Batik separation. Ethanol as frother used proved capable of making stable froth formed and increase the separation efficiency.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
T35649
UI - Tesis Membership  Universitas Indonesia Library
cover
Pradityo Nur Oktoviarto
"Sirkuit flotasi rougher biasa digunakan pada pabik pengolahan mineral yang bertujuan untuk mendapatkan perolehan maksimal pada mineral berharga dengan standard minimal kadar yang telah ditentukan oleh perusahaan. Penelitian ini bertujuan untuk mengatahui pengaruh profil kecepatan buih 9.67 cm/s ndash; 13.76 cm/s ndash; 19.55 cm/s ndash; 22.58 cm/s dan profil 11.40 cm/s ndash; 19.36 cm/s ndash; 13.87 cm/s ndash; 6.17 cm/s terhadap perolehan dan kadar Tembaga dan Emas yang nantinya sampel umpan, konsentrat, dan tail akan diuji AAS serta XRD untuk mengetahui kadar dan kandungan mineral yang terdapat pada sampel sehingga kita bisa menghitung serta menganalisa performa untuk setiap profil kecepatan buih. Hasil penelitian yang didapat adalah kedua profile memiliki hasil yang sama pada perolehan Tembaga tetapi profil pertama memiliki kadar yang lebih tinggi dan pada perolehan Emas, profil kedua memiliki hasil perolehan yang lebih tinggi namun memiliki kadar yang lebih rendah dibanding profil pertama.

Rougher Flotation circuit commonly used in mineral processing industry to aiming to get maximum recovery, within minimum standar of valuable mineral grade which has been determined by the company. The purpose of this research is to know the effect of the froth velocity profile 9.67 cm s ndash 13.76 cm s ndash 19.55 cm s ndash 22.58 cm s and profile 11.40 cm s ndash 19.36 cm s ndash 13.87 cm s ndash 6.17 cm s against the recovery and grade of Copper and Gold which later the sample of feed, concentrates, and tail to be tested with AAS and XRD to find out the grade and mineral content in the sample, so we can calculate and analyze the performance for every froth velocity profile. The result of this research is both profile has the same Copper recovery result but the first profile has higher Copper grades. On the Gold recovery, second profile has higher perolehan result but has lower Gold grades than the first profile."
Depok: Fakultas Teknik Universitas Indonesia, 2017
S67905
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>