Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 167756 dokumen yang sesuai dengan query
cover
Suharno
"Bahan yang memiliki sifat ferroelektrik dan ferromagnetik berpotensi sebagai absorber gelombang mikro dan memiliki peranan penting pada dunia militer. BiFeO3 merupakan salah satu bahan multiferroik yang memiliki sifat ferroelektrik dan ferromagnetik. Pada penelitian ini dilakukan rekayasa sintesa BiFeO3 dengan doping Yttrium dan Seng dengan variasi konsentrasi (%wt) 6, 12, dan 18%. Sintesa BiFeO3 telah berhasil disintesis dengan metode sol-gel autocombustion. Melalui uji XRD, fasa BiFeO3 diperoleh pada temperatur 750°C selama 5 jam. Hasil refinement menunjukkan bahwa BiFeO3 memiliki struktur kristal rhombohedral space grup R3c. BiFeO3 doping Yttrium dan Seng di atas 12% (%wt) terjadi perubahan struktur kristal dari rhombohedral ke orthorombic. Kurva hysterisis menunjukkan bahwa BiFeO3 memiliki saturasi magnetik 3.04 emu/g, remanen magnetik 0.26 emu/g, dan medan koersivitas 0.0013 T. BiFeO3 doping Yttrium dengan konsentrasi (%wt) 12% terjadi peningkatan nilai saturasi magnetik, remanen magnetik, dan medan koersivitas namun BiFeO3 doping Seng dengan konsentrasi (%wt) 12% terjadi penurunan nilai saturasi magnetik, remanen magnetik, dan medan koersivitas. BiFeO3 doping Yttrium 12% (%wt) dan Seng 12% (%wt) memiliki nilai saturasi magnetik 8.18 emu/g, remanen magnetik 2.92 emu/g, medan koersivitas 0.0036 T. Pada frekuensi 1 kHz BiFeO3 memiliki konstanta dielektrik sebesar 239.12 dan adanya doping Yttrium dan Seng terjadi penurunan nilai konstanta dielektrik. Hasil pengujian sifat penyerapan gelombang mikro pada frekuensi X band (8.2 ? 12.4 GHz) diperoleh bahwa bahan Bi0.88Y0.12FeO3/C memiliki refleksi loss -39.42 dB pada frekuensi resonansi 11.47 GHz. Dengan demikian bahan Bi0.88Y0.12FeO3/C dapat dijadikan bahan penyerap gelombang mikro pada frekuensi X band.

Materials with both ferroelectric and ferromagnetic properties are potential candidate for microwave absorbers and play important role in military world. One of them is BiFeO3, a multiferroic material with both ferroelectric and ferromagnetic properties. In this research, BiFeO3 has been synthesized successfully via auto-combustion sol-gel method. To improve its properties, yttrium- and zinc-doped BiFeO3 has been synthesized with various doping concentrations, i.e. 6, 12, and 18 wt.%. X-ray diffraction patterns showed that BiFeO3 phase was obtained after heating at 750ᵒC for 5 hours with rhombohedral crystal structure and space group of R3c. The hysteresis curve of BiFeO3 showed a magnetic saturation of 3.04 emu/g, magnetic remnant 0.26 emu/g and coercive field 0.0013 T. Yttrium- and zinc-doped BiFeO3 over 12wt.% showed a structural change from rhombohedral to orthorhombic with magnetic saturation of 8.18 emu/g, the magnetic remnant of 2.92 emu/g and coercive field of 0.0036 T. Yttrium-doped BiFeO3 showed an increase in the magnetic saturation, the magnetic remnant and the coercive field; however zinc-doped BiFeO3 showed a decrease in the magnetic saturation, the magnetic remnant and coercive field. At a frequency of 1 kHz, the dielectric constant of BiFeO3 was 239.12, and this value will decrease when it was doped by yttrium and zinc. Further investigation on the application of this material, composites Bi0.88Y0.12FeO3/C has also been synthesized. The composites showed a reflection loss of -39.32 dB within the frequency range of 8.2-12.4 GHz (X-band) particularly at the frequency of 11.47 GHz with the absorptivity of 98.60%. Based on this results, composite Bi0.88Y0.12FeO3/C material could be used as a potential microwave absorber in the X-band frequency.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2015
D2061
UI - Disertasi Membership  Universitas Indonesia Library
cover
Een Taryana
"Penelitian ini mengkaji pengaruh doping Lithium (Li) dan Titanium (Ti) pada BiFeO3 (BFO). Semua sampel disintesis menggunakan metode sol-gel. Tahap selanjutnya adalah dengan melakukan komposit senyawa BFO yang di doping Lithium dan Titanium dengan poliuretan (PU) dan karbon (C). Difraksi sinar-X, SEM/EDS, dan vector network analyzer (VNA) dilakukan untuk mengkarakterisasi struktur mikro dan sifat elektromagnetik dari sampel yang disiapkan. Pengujian Bi1−xLixFeO3 (x = 0.02, 0.04, 0.06) menunjukkan nilai permeabilitas tertinggi diperoleh pada konsentrasi x = 0.06 yang juga dihasilkan puncak serapan tertinggi dengan reflection loss (RL) sebesar -46 dB pada frekuensi10.08 GHz dengan bandwidth (BW) 0.1 GHz. Hasil pengujian BiFe1-yTiyO3 (y = 0, 0.01, 0.03, 0.05, 0.07) diperoleh nilai permitivitas tertinggi pada komposisi y=0.03, yang juga dihasilkan penyerapan gelombang mikro tertinggi dengan RL sebesar -35 dB pada frekuensi 11.12 GHz dengan BW 0.46 GHz. Bahan komposit PU/C/BLFO6 menghasilkan RL sebesar -23.32 dB pada frekuensi 10.76 GHz dengan BW 0.59 GHz, sedangkan pada bahan komposit PU/C/BFTO3 menghasilkan RL sebesar -42.21 dB pada frekuensi 10.48 GHz dengan BW 0.83 GHz. Bahan komposit dengan komposisi berat BLFO6 (60%) dan BFTO3 (40%) [PU/C/BLFTO64] dengan ketebalan sampel 2 mm menghasilkan serapan tertinggi dibandingkan dengan komposisi bahan komposit lainnya dengan RL −50.56 dB pada frekuensi 10.68 GHz dengan BW 0.78 GHz. Penambahan doping Li dan Ti pada BFO terbukti dapat meningkatkan sifat permeabilitas dan permitivitas yang merupakan salah satu persyaratan agar BFO dapat dijadikan bahan penyerap gelombang mikro yang baik. Penambahan PU/C juga terbukti dapat meningkatkan serapan gelombang mikro dan memperlebar bandwidth. Bahan komposit PU/C/BLFTO64 mempunyai sifat penyerap gelombang mikro yang baik pada frekuensi X-band.

This study investigates the effect of Lithium (Li) and Titanium (Ti) doping on BiFeO3 (BFO). All samples were synthesized using the sol-gel method. The next step is to perform a composite of Lithium and Titanium doped BFO compounds with polyurethane (PU) and carbon (C). The X-ray diffraction, SEM/EDS, and vector network analyzer (VNA) were conducted to characterize the microstructure and electromagnetic properties of the as-prepared samples. The test result of Bi1−xLixFeO3 (x = 0.02, 0.04, 0.06) showed the highest permeability values and also produces the highest reflection loss (RL) of −46 dB over a 0.1 GHz bandwidth at 10.08 GHz. The test results of the BiFe1-yTiyO3 (y = 0.01, 0.03, 0.05, 0.07) obtained the highest permittivity value at the doping of y = 0.03 and also was produces the highest microwave absorption with RL −35 dB over a 0.41 GHz bandwidth at 11.12 GHz. The composite material of PU/C/BLFO6 produced an RL of −23.32 dB over a 0.59 GHz bandwidth at 10.76 GHz, while the composite material of PU/C/BFTO3 produced an RL of −42.21 dB over a 0.83 GHz bandwidth at 10.48 GHz. A composite material with BLFO6 (60%) and BFTO3 (40%) [PU/C/BLFTO64] weight fractions and a sample thickness of 2 mm produced the highest absorption compared to other compositions with RL −50.56 dB over a 0.78 GHz bandwidth at 10.68 GHz. The doping of Li and Ti to BFO is proven to improve the permeability and permittivity properties which are one of the requirements for BFO to be used as a good microwave absorbent material. The addition of PU/C is also proven to increase microwave absorption and widen bandwidth. The results indicate that the composite material of PU/C/BLFTO64 were successfully gained and the as-prepared samples possess excellent microwave absorption properties in X-band frequency.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
D-Pdf
UI - Disertasi Membership  Universitas Indonesia Library
cover
Kent Chester
"ABSTRAK

Secara tradisional, metode memasak kerupuk adalah dengan menggorengnya sampai bentuknya optimal. Namun, ada berbagai cara alternatif untuk mengekspansi volume kerupuk, misalnya, dengan metode pemanasan pasir dan pemanasan gelombang mikro dalam microwave. Pemanasan gelombang mikro memang memberikan rasa baru dan cara sehat untuk mengkonsumsi kerupuk, daripada metode menggoreng dan menarik lebih banyak lemak ke dalam kerupuk. Namun, memasak kerupuk menggunakan oven mikrowave tidak menghasilkan distribusi panas yang seragam, sehingga kerupuk tidak berkembang secara optimal dan mempertahankan beberapa bagian yang tidak berkembang. Untuk mengatasi masalah ini, sebuah film metalik tipis digunakan untuk percobaan untuk meningkatkan volume ekspansi. Penggunaan film diyakini dapat memberikan beberapa ekspansi volume melalui penggunaannya pada popcorn mikrowave. Eksperimen ini melibatkan penggunaan sampel dan pengukuran kerupuk dengan Faro-Arm dan perpindahan pasir untuk menemukan dan membandingkan volume.


ABSTRACT
Methods to cook cracker traditionally was by fry it until it expand into its optimum shape. Then, there are various methods to alternatively expand the cracker, e.g. heat with sand and microwave heating. Microwave heating does gives new taste and healthy way to consume cracker rather than frying it and attract more fat into the cracker. However, using microwave to cook cracker does not gives an uniform distribution of heat and therefore the cracker does not expand optimally and remains some raw parts that did not expand. To solve this problem, a thin film is used for an experiment to increase the expansion volume. The usage of thin film is believed to gives some boost of expansion by its use on microwave popcorn. This experiment involve using samples of cracker and being measured by Faro-Arm and sand displacement method to find and compare the volume. 

"
2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rifqi Muhammad Kautsar
"Pengaruh doping potassium (K) pada lanthanum manganite La1-xKxMnO3 (x= 0; 0,1; 0,2; 0,3) terhadap sifat penyerapan gelombang mikro telah selesai dipelajari. Sampel disintesis menggunakan metode Sol-Gel dengan suhu kalsinasi 600˚C selama 6 jam dan suhu sintering 750˚C selama 24 jam. Hasil analisis XRD menunjukkan bahwa seluruh sampel memiliki struktur kristal rhombohedral dengan space group R-3c. Ukuran kristalit sampel berdasarkan uji SEM-EDS berkisar antara 80 – 400 nm. Hasil karakterisasi EDS menunjukkan sinar-x karakteristik masing-masing komponen timbul pada hasil EDS. Karakterisasi sifat magnetik menggunakan VSM menunjukkan bahwa sifat magnetik sampel mengalami transisi dari paramagnetik pada sampel menjadi ferromagnetik seiring dengan bertambahnya komposisi potassium. Uji VNA dilakukan pada frekuensi x-band, yakni pada rentang frekuensi 8 – 12.5 GHz. Nilai reflection loss masing-masing sampel adalah -4,58 dB untuk sampel LKMO-0; -5,47 dB untuk LKMO-1; -4,65 dB untuk LKMO-2, dan -5,19 dB untuk LKMO-3. Puncak reflection loss seluruh sampel rata-rata berada pada frekuensi 9 GHz. Pada frekuensi tersebut juga sampel LKMO-1 memiliki nilai permeabilitas real dan imajiner yang paling tinggi daripada sampel lainnya.

The effect of potassium (K) doping on lanthanum manganite La1-xKxMnO3 (x= 0; 0.1; 0.2; 0.3) on the microwave absorption properties has been studied. The samples were synthesized using Sol-Gel method with a calcination temperature 600˚ for 6 hours and sintering temperature 750˚ for 24 hours. The XRD result showed that all of the samples are rhombohedral with space group R-3c. The crystallite size of the samples based on the SEM-EDS test ranges from 80-400 nm and characteristic x-rays of each component appear in the EDS results. Magnetic characterization using VSM revealed that the magnetic properties of the samples changed from paramagnetic to ferromagnetic as the potassium composition increased. VNA characterization was conducted at the x-band frequency with range 8-12.5 GHz. The reflection loss values of each sample were -4.58 dB for LKMO-0 sample; -5.47 dB for LKMO-1; -4.65 dB for LKMO-2, and -5.19 dB for LKMO-3. The peak of reflection loss curve of all samples was averagely at 9 GHz frequencies. At this frequency, the LKMO-1 sample has the highest real and imaginary permeability values compared to the others."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Sitti Ahmiatri Saptari
"Penggunaan gelombang mikro dalam beberapa tahun terakhir ini mengalami peningkatan yang sangat pesat seiring berkembangnya teknologi komunikasi dan informasi. Hal ini menimbulkan masalah baru yakni terjadinya polusi gelombang mikro. Untuk mengimbangi dampak negatif polusi interferensi gelombang elektromagnetik, para peneliti mencoba mengembangkan material penyerap gelombang elektromagnetik. Salah satu material yang menjadi kandidat potensial untuk aplikasi penyerap gelombang mikro adalah material berbasis lantanum manganat.
Pada penelitian ini dipelajari rekayasa struktur material berbasis lantanum manganat dengan sistem La0,67Ba0,33Mn1-xNix/2Tix/2O3 (x = 0; 0,02; 0,04 dan 0,06). Fasa tunggal senyawa La0.67Ba0.33Mn1-xNix/2Tix/2O3 berhasil dibuat melalui proses pemaduan mekanik menggunakan prekusor-prekusor La2O3, MnCO3, BaCO3, TiO2, dan NiO dengan tingkat kemurnian tinggi. Selanjutnya serbuk hasil pemaduan mekanik menjalani perlakuan pemanasan pada suhu 1200oC selama 10 jam. Material yang telah dipanaskan kemudian dihaluskan kembali selama 20 jam.
Hasil refinement pola difraksi sinar X menunjukkan bahwa senyawa La0,67Ba0,33Mn1-xNix/2Tix/2O3 memiliki strukstur kristal monoklinik untuk seluruh variasi x. Kurva histerisis sampel menunjukkan bahwa material ini termasuk magnet lunak. Hasil evaluasi distribusi ukuran partikel material dengan komposisi terbaik yakni La0,67Ba0,33Mn0,06Ni0,03Ti0,03O3 adalah 82,4 nm. Hasil pengujian sifat serapan gelombang mikro pada rentang 8-12,4 GHz menunjukkan material mampu mereduksi gelombang mikro hingga 94 % pada frekuensi 11,4 GHz. Dengan demikian senyawa La0,67Ba0,33Mn1-xNix/2Tix/2O3 dapat dijadikan sebagai material penyerap gelombang mikro.

In recent years, application of microwaves has been increased along with the development of communication and information technology and highly produces electromagnetic wave interference. To solve this problem, scientist tries to develop a new material that could absorb electromagnetic waves. One of potential candidates for absorbing materials is lanthanum manganese-based system.
In this research, La0.67Ba0.33Mn1-xNix/2Tix/2O3 (x = 0, 0.02, 0.04, and 0.06) compound were studied as a microwaves absorber materials. Single phase of La0.67Ba0.33Mn1-xNix/2Tix/2O3 were successfully synthesized by mechanical alloying method. The mixture of all precursors were first mechanically milled for 20 hours and then sintered at a temperature of 1200oC for 10 h in which a fully crystalline material is ensured. The sintered materials were then re-milled for 20 hours to obtain powder-based nanoparticle.
X-ray diffraction refinement shows that the samples have monoclinic structure at all x compositions. The hysteresis curve evaluation showed that the sample materials is soft magnetic. The best composition of La0.67Ba0.33Mn1-xNix/2Tix/2O3 with x = 0.06 has been evaluated. The compound has 82.4 nm particle size distributions and it is able to absorb up to 94% microwaves at 11.4 GHz. The study concluded the material of La0.67Ba0.33Mn1-xNix/2Tix/2O3 have a good potential to be a candidate of microwaves absorbing materials.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2015
D1872
UI - Disertasi Membership  Universitas Indonesia Library
cover
Mohammad Amanta Kumala Sakti
"Untuk mengawasi dan mengamankan perbatasan wilayah NKRI dari aktivitas ilegal, Indonesia membutuhkan radar. Radar terdiri atas beberapa komponen, salah satunya adalah antena yang bekerja pada frekuensi X-band dengan spesifikasi performansi tertentu seperti gain yang tinggi, Half Power Beamwidth HPBW yang sangat rendah dan Side Lobe Level SLL yang rendah.Tesis ini membahas tentang rancang bangun antena slotted waveguide dengan 12 slot yang berada pada dinding sempit waveguide untuk frekuensi X-band. Langkah pertama yang dilakukan dalam melakukan rancang bangun antena slotted waveguide adalah dengan melakukan identifikasi parameter seperti panjang gelombang, slot width, slot spacing, slot angle, dan slot depth.
Dari hasil identifikasi parameter, selanjutnya akan dilakukan perhitungan, perancangan dan simulasi. Untuk mengoptimasi hasil perancangan maka dilakukan karakterisasi antena sehingga mendapatkan hasil yang terbaik. Langkah terakhir yang dilakukan dari rancang bangun antena slotted waveguide adalah melakukan validasi hasil perancangan dan fabrikasi dengan cara melakukan pengukuran parameter ndash; parameter antena. Dari hasil pengukuran, untuk antena fabrikasi menghasilkan VSWR 1,18, bandwidth 335 MHz pada frekuensi tengah 9,4 GHz. Sedangkan hasil simulasi antena menghasilkan VSWR 1,17, bandwidth 251 MHz pada frekuensi tengah 9,4 GHz. Dalam melakukan perancangan dan fabrikasi antena narrow wall waveguide 12 slot, dibutuhkan ke akurasian dan data ndash; data yang lengkap sehingga meminimalis terjadinya kesalahan.

To supervise and secure the borders of the NKRI from illegal activities, Indonesia requires radar. The radar consists of several components, one of which is an antenna that works on X band frequency with certain performance specifications such as high gain, Half Power Beamwidth HPBW is very low and Side Lobe Level SLL is low.In this article discusses a design of a slotted waveguide antena with 12 slot located on the narrow wall waveguide for X band frequencies. The first step at designing a slotted waveguide antenna is identify parameters such as wavelength, slot width, slot spacing, slot angle and slot depth.
From the result of parameter identification, will be calculate, designed and simulated. To optimize the design results, do the antenna characterization for the best results. The last step from the design slotted waveguide antenna is do the validation results and fabrication by measuring the antenna parameters. From the measurement results, for fabrication antennas produce VSWR 1.18, 335 MHz bandwidth at the center frequency of 9.4 GHz. While the antenna simulation results generate VSWR 1.17, bandwidth 251 MHz at the center frequency of 9.4 GHz. In designing and fabrication narrow wall slotted waveguide antenna, the accuration and complet data are very important to minimize of errors.
"
Depok: Fakultas Teknik Universitas Indonesia, 2017
T47947
UI - Tesis Membership  Universitas Indonesia Library
cover
Gede Yudharma
"Pada penelitian ini dibuat lapisan tipis LaMnO3 menggunakan metode deposisi elektroforesis pada susbtrat stainless steel SS-316 ukuran 1 x 10 x 30 mm. Serbuk LaMnO3 disintesis memakai metode sol-gel dengan campuran stokiometri antara La(NO3)3.6H2O dan Mn(NO3)2.4H2O. Sebagai larutan suspensi dipakai campuran ethanol dan deionized water dengan komposisi 90 : 10 serta serbuk LaMnO3 sebesar 30 mg dalam 50 ml larutan. Dengan memberikan tegangan DC (direct current) sebesar 60 V dan waktu deposisi 15 menit, dapat menghasilkan lapisan tipis dengan permukaan yang homogen yang ditunjukkan dengan nilai root mean square (RMS) roughness sebesar 30,96 nm. Karakterisasi menggunakan X-ray diffractometer (XRD) menunjukkan bahwa sampel lapisan tipis menghasilkan fasa senyawa substrat dan LaMnO3 dengan volume sel dan ukuran kristal meningkat dengan meningkatnya temperatur anil. Hasil scanning electron microscope (SEM) memperlihatkan bahwa morfologi sampel lapisan tipis memperlihatkan ukuran grain berkisar antara 200-400 nm. Karakterisasi dengan fourier transform infra red (FTIR) memperlihatkan bahwa material memiliki pita serapan pada 580 cm-1, merupakan karakteristik absorbsi ikatan Mn-O (streaching Mn-O-Mn pada oktahedral MnO6) yang berhubungan dengan gerakan internal perubahan panjang dari batas Mn-O-Mn. Hasil karakterisasi dengan vibration sample magnetometer (VSM) menunjukkan bahwa lapisan tipis LaMnO3 memiliki sifat feromagnetik. Kurva histerisis yang dihasilkan menunjukkan bahwa kenaikan temperatur anil menyebabkan meningkatnya sifat kemagnetan bahan. Nilai magnetisasi saturasi Ms sebesar 2,377 emu/g dan koersivitas Hc sebesar 212,03 Oe dicapai ketika temperatur anil 950°C. Hasil proses deposisi selama 15, 25 dan 35 menit, didapatkan hasil bahwa lapisan tipis LaMnO3 dapat digunakan sebagai bahan penyerap gelombang mikro. Bahan ini memiliki nilai permitivitas dan permeabilitas yang relatif tinggi dengan empat puncak serapan pada range frekuensi 8 – 12 GHz. Nilai reflection loss paling besar dalam tanda negatif dicapai oleh sampel dengan waktu deposisi 15 menit serta suhu anil 900°C sebesar - 49,25 dB pada frekuensi 8,59 GHz dan bandwidth sebesar 0,86 GHz. Sampel ini memiliki impedansi (Zin=33,3-j37,3 Ω) mendekati nilai impedansi line transmisition Zo (50 Ω)

In this study, a thin layer of LaMnO3 was prepared using the electrophoretic deposition method on a 1 x 10 x 30 mm stainless steel SS-316 substrate. LaMnO3 powder was synthesized using the sol-gel method with a stoichiometric mixture of La(NO3)3.6H2O and Mn(NO3)2.4H2O. As a suspension solution used a mixture of ethanol and deionized water with a composition of 90 : 10 and LaMnO3 powder of 30 mg in 50 ml of solution. By providing a DC (direct current) voltage of 60 V and a deposition time of 15 minutes, it can produce a thin layer with a homogeneous surface as indicated by the root mean square (RMS) roughness value of 30.96 nm. Characterization using an X-ray diffractometer (XRD) showed that the thin layer samples produced a substrate and LaMnO3 compound phase with cell volume and crystalline size increasing with increasing annealing temperature. Scanning electron microscope (SEM) results show that the morphology of the thin layer samples shows grain sizes ranging from 200-400 nm. Characterization with Fourier transform infrared (FTIR) produces an absorption band of about 580 cm-1, which is a characteristic of Mn-O bond absorption (Streaching Mn-O-Mn on the MnO6 octahedron) which is related to the internal movement of changes in length from the Mn-O Mn boundary. The results of characterization with a vibration sample magnetometer (VSM) showed that the LaMnO3 thin layer has ferromagnetic properties. From the resulting hysteresis curve, the increase in sintering temperature increases the magnetic properties of the material. The saturation magnetization value of Ms reached 2.377 emu/g and the Hc coercivity of 212.03 Oe was achieved when the annealing temperature was 950°C. The results of the deposition process for 15, 25 and 35 minutes showed that the LaMnO3 thin layer could be used as a microwave absorbent material. This material has relatively high permittivity and permeability values ​​with four absorption peaks in the frequency range of 8 – 12 GHz. The larger the negative value of reflection loss was achieved by samples with a deposition time of 15 minutes and annealing time of 900°C of -49.25 dB at a frequency of 8.59 GHz and a bandwidth of 0.86 GHz. This sample has an impedance (Zin=33.3-j37.3Ω) close to the line transmission impedance value Zo (50Ω)."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
D-pdf
UI - Disertasi Membership  Universitas Indonesia Library
cover
Yuli Amalia Husnil
"Tesis ini membahas pengaruh perlakuan paparan gelombang mikro dengan variasi daya dan waktu paparan gelombang mikro terhadap kandungan bambu yang larut dalam air, jumlah gula pereduksi, dan konsentrasi etanol. Hasil penelitian menunjukkan bahwa perlakuan gelombang mikro mampu meningkatkan persentase kandungan larut air. Hal ini semakin diperkuat dengan hasil gula pereduksi dan etanol yang lebih tinggi pada substrat yang telah mengalami perlakuan gelombang mikro dibanding substrat yang tidak mengalami perlakuan.

This thesis explains the effect of microwave exposure with power and time variation on water soluble content of bamboo, reducing sugars and also yields of ethanol. Experimental data shows that microwave exposure could increase the water soluble content of bamboo. This result is emphasized with result of reducing sugars and ethanol yield that higher in substrate that had been exposed on microwave radiation."
2009
T25899
UI - Tesis Open  Universitas Indonesia Library
cover
Wahyu Dian Laksanawati
"ABSTRAK
Tesis ini melaporkan proses dan hasil penelitian yang dilengkapi oleh karakterisasi material
La0,67Sr0,33Mn1-xNixO3 dengan variasi x = 0,00 ; 0,15 ; 0,20 ; 0,25 yang telah berhasil
disintesis dengan metode sol gel. Hasil refinement dari data XRD menunjukkan bahwa pada
material La0,67Sr0,33Mn1-xNixO3 telah terbentuk fasa tunggal untuk empat variasi sampel yaitu
La0,67Sr0,33Mn1-xNixO3 dengan x = 0,00 ; 0,15 ; 0,20 ; 0,25. Dari hasil refinement
menggunakan perangkat lunak High Score didapatkan ukuran kristal pada masing ? masing
sampel 22,66 nm ; 23,26 nm ; 21,18 nm ; 18,62 nm. Gugus fungsi Mn-O-Mn terbentuk dari
hasil uji FTIR bervibrasi regangan pada bilangan gelombang sekitar 600 cm-1. Dari hasil uji
SEM Informasi mengenai morfologi sampel La0,67Sr0,33Mn1-xNixO3 menunjukkan bahwa
antara partikel saling teraglomerasi. Pada hasil pengujian distribusi ukuran partikel
menunjukkan bahwa rata ? rata ukuran partikel x = 0,00 ; 0,15 ; 0,20 ; 0,25 yaitu 502,9 nm ;
447,6 nm ; 264,8 nm ; 371,7 nm. Jumlah konsentrasi spin pada sampel pada masing ? masing
nilai x pada hasil uji ESR menunjukkan penurunan, yaitu ketika doping Ni ditambah maka
luas area dibawah kurva absorpsi menurun. Hal ini dikarenakan adanya ion Ni2+ yang
mensubstitusi ion Mn3+ sehingga menghambat hopping elektron dari elektron eg (ion Mn3+)
ke t2g (ion Mn4+) pada mekanisme double excange sehingga spin pada elektron t2g akan
antiparalel. Kompetisi antara sifat feromagnetik dengan antiferomagnetik menjadikan spin
akan berubah arah sehingga kemagnetan sampel akan menurun dan momen magnetik
menjadi acak. Hasil ESR ini digunakan untuk mengkonfirmasi hasil VNA. Kemampuan
absorpsi gelombang mikro ditunjukkan dengan nilai reflection loss pada sampel x = 0,00 ;
0,15 ; 0,20 ; 0,25 berturut-turut sebesar -65,37 dB , -66,17 dB, -66,67 dB dan -77,22 dB.
Reflection loss meningkat ketika doping Ni ditambah karena gelombang elektromagnetik
yang diberikan kepada sampel La0,67Sr0,33Mn1-xNixO3 digunakan untuk menyearahkan momen
magnetik.

ABSTRACT
This thesis reports the process and the results are supplemented by material characterization
La0,67Sr0,33Mn1-xNixO3with variation x = 0.00; 0.15; 0.20; 0.25 which has been synthesized by
sol gel method. Results refinement of the XRD data showed that the material La0,67Sr0,33Mn1-
xNixO3have formed a single phase to four-sample variation is La0,67Sr0,33Mn1-xNixO3with x =
0.00; 0.15; 0.20; 0.25. From the results of using the software refinement High Score obtained
crystal size on each - each sample of 22.66 nm; 23.26 nm; 21.18 nm; 18.62 nm. Functional
groups Mn-O-Mn is formed from the FTIR test strain vibrate at wave number 600 cm-1.
From the test results SEM morphology Information La0,67Sr0,33Mn1-xNixO3samples showed
that the particles are agglomerated. In the particle size distribution of the test results showed
that the average - average particle size x = 0.00; 0.15; 0.20; 0.25 is 502.9 nm; 447.6 nm;
264.8 nm; 371.7 nm. Number of spin concentration in the sample on each - each value of x in
the ESR test results showed a decrease, when doping Ni plus, the area under the curve of
absorption decreases. This is due to the substitution of Ni2+ ions Mn3+ ions thus inhibiting
electron hopping of electrons eg (ion Mn3+) to t2g (Mn4+ ion) in the mechanism of double
excange so that the spin of the electrons will t2g antiparallel. Competition between
ferromagnetic properties with antiferromagnetic spin make will change the direction so that
the sample magnetization will decrease and the magnetic moments become random. ESR
results are used to confirm the results of the VNA. Microwave absorption ability is indicated
by the value of reflection loss on the sample x = 0.00; 0.15; 0.20; 0.25 respectively for -65.37
dB, -66.17 dB, -66.67 dB and -77.22 dB. Reflection loss increases when the doping Ni plus
because the electromagnetic waves given to the sample La0,67Sr0,33Mn1-xNixO3 used to align
the magnetic moment"
2016
T46423
UI - Tesis Membership  Universitas Indonesia Library
cover
Syahrul Ramdani
"ABSTRAK
Proses pemindaian dini saat ini masih dilakukan dengan Computed Tomography Scan atau Magnetic Resonance Imaging. Namun, alat pemindai tersebut memiliki biaya yang mahal dan ukuran yang besar. Pencitraan gelombang mikro merupakan salah satu teknik tomografi alternatif yang dapat menutupi kekurangan tersebut. Sementara itu, sistem pencitraan medis membutuhkan jumlah pengukuran yang cukup banyak untuk mendapatkan citra hasil rekonstruksi yang baik. Untuk mengurangi jumlah pengukuran, penelitian ini mengusulkan pendekatan Compressive Sensing CS untuk aplikasi pencitraan gelombang mikro. Proses pemindaian dilakukan pada perangkat lunak Computer Simulation Technology dengan objek uji berupa phantom kubus dua lapis dengan permitivitas yang berbeda. Agar sesuai dengan kerangka CS , matriks pembobotan Discrete Radon Transform dipilih sebagai matriks proyeksi. Discrete Cosine Transform dan Basis Pursuit dipilih sebagai matriks sparse dictionary dan algoritma rekonstruksi sinyal sparse. Pada proses pemindaian, jumlah translasi dan rotasi divariasikan untuk menguji kinerja CS. Data pengukuran S21 berhasil direkonstruksi menjadi citra dengan pendekatan CS. Hasil rekonstruksi menunjukkan bahwa penambahan jumlah translasi dan rotasi dapat meningkatkan kualitas citra hasil rekonstruksi, meskipun tidak terdapat hubungan yang linear antara keduanya. Secara kualitatif dan kuantitatif, citra hasil rekonstruksi menggunakan CS memiliki kualitas yang lebih baik dibandingkan dengan yang direkonstruksi menggunakan algoritma Filtered Back Projection dan Simultaneous Algebraic Reconstruction Technique. Sebagai tambahan, CS terbukti dapat merekonstruksi data pengukuran sebenarnya dari phantom fisik menjadi sebuah citra.

ABSTRACT
Early detection is still generally performed by using Computed Tomography scan or Magnetic Resonance Imaging. However, those modalities have high production costs and considerable size. Microwave Imaging is one of the alternative tomography techniques that can overcomes those aforementioned problems. Meanwhile, the medical imaging systems require a great amount of data measurements to obtain a good reconstructed image. In order to reduce the number of measurements, this research proposes a Compressive Sensing CS approach for microwave imaging application. The scanning process is conducted on Computer Simulation Technology software. A two layer cube phantom with different permittivity is used as the scanned object. To meet the framework of CS, weight matrix of Discrete Radon Transform is utilized as projection matrix. Discrete Cosine Transform and Basis Pursuit are selected as sparse dictionary matrix and sparse reconstruction algorithm respectively. In the data acquisition process, the number of translations and rotations is varied to test the performance of CS. The measured S21 data are successfully reconstructed by CS approach into an image. The reconstruction results show that adding the number of translations and rotations can improve the quality of the reconstructed image, although there is no linear relationship between them. Qualitatively and quantitatively, the image reconstructed using CS has a better quality compared to that reconstructed using Filtered Back Projection and Simultaneous Algebraic Reconstruction Technique algorithm. In addition, CS is proved to be able to reconstruct the real measurement data from the physical phantom into an image"
Depok: Fakultas Teknik Universitas Indonesia, 2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>