Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 478 dokumen yang sesuai dengan query
cover
Bernhard Rieg, editor
"This book about salen metal complexes as catalysts for the synthesis of polycarbonates from cyclic ethers and carbon dioxide, material properties of poly(propylene carbonates), poly(3-hydroxybutyrate) from carbon monoxide, ecoflex® and ecovio® : biodegradable, performance-enabling plastics, biodegradability of poly(vinyl acetate) and related polymers, recent developments in ring-opening polymerization of lactones, recent developments in metal-catalyzed ring-opening polymerization of lactides and glycolides : preparation of polylactides, polyglycolide, and poly(lactide-co-glycolide), bionolle (polybutylenesuccinate), and polyurethanes from renewable resources."
Berlin: Springer, 2012
e20406082
eBooks  Universitas Indonesia Library
cover
Sipahutar, Muhammad Fairuz Daffa
"PLA adalah salah satu biodgradable polymer yang umum digunakan untuk perangkat medis terutama implan dengan ukuran kecil. Sifat biodegradable yang dimiliki PLA mem-buat implan PLA akan terdegradasi dengan sendirinya ketika ditanamkan kedalam jaringan tubuh manusia seperti tulang sehingga tidak diperlukan untuk melakukan operasi pencabutan implan setelah ditanamkan. Saat ini, banyak merk-merk polimet yang mengeluarkan produk PLA mereka sendiri dengan propertiesdan karakteristik yang berbeda-beda. Karakteristik tersebut akan memperngaruhi hasil akhir dari produk yang akan dibuat melalui proses produksi. Salah satu proses produksi yang dapat di aplikasikan pada PLA adalah melalui proses injection molding. Injection molding adalah proses pencetakan polimer yang dapat di aplikasikan pada industri skala besar. Proses injection molding dapat juga di aplikasikan ke produk dengan ukuran kecil, menengah maupun besar tergantung mesin yang digunakan. Sejatinya, pada setiap proses produksi yang menggunakan mold dan polimer cair akan ter-dapat efek samping yaitu shrinkage dan warpage yang merupakan dimensional flaw. Shrink-age dan warpage dapat ditentukan menggunakan beberapa metode salah satunya adalah menggunakan software Autodesk Moldflow untuk memperkirakan shrinkage dan warpage tersebut.

PLA is a biodgradable polymer that is commonly used for medical devices, especially small implants. The biodegradable nature of PLA makes PLA implants degrade automatically when implanted into human body tissues such as bone, so there is no need to perform implant removal surgery after implantation. Currently, many polymer brands are releasing their own PLA products with different properties and characteristics. These characteristics will affect the final result of the product that will be made through the production process. One of the production processes that can be applied to PLA is through the injection molding process. Injection molding is a polymer molding process that can be applied to large-scale industries. The injection molding process can also be applied to products with small, medium or large sizes depending on the machine used. In fact, every production process that uses molds and liquid polymers will have side effects, namely shrinkage and warpage which are dimensional flaws. Shrinkage and warpage can be determined using several methods, one of which is using Autodesk Moldflow software to estimate the shrinkage and warpage."
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rahma Utari
"[ABSTRAK
Produk perishable adalah produk yang akan mengalami kerusakan atau penurunan kualitas sehingga tidak layak atau aman untuk dikonsumsi karena perubahan kondisi yang terjadi terhadap produk. Salah satu contoh produk perishable yang paling umum adalah makanan. Penelitian ini bertujuan untuk merancang konsep biodegradable active & intelligent packaging untuk digunakan pada produk makanan, terutama produk muscle-based. Jenis plastik yang dibuat adalah plastik oxo-degradable. Melalui survei menggunakan kuesioner dan analisis AHP, diketahui fitur active packaging dan intelligent packaging yang dianggap paling penting secara berurutan adalah antimicrobial packaging dan spoilage/freshness indicator, yang dibuat dengan penambahan bahan antimikroba berbahan dasar perak dan indikator berbahan dasar antosianin terhadap masterbatch plastik pada proses ekstrusi.

ABSTRACT
Perishable products are products which eventually degrade in quality and safety as time passes by. One example of perishable product is food. This research aims to design the concept of biodegradable active & intelligent packaging used for food products, particularly muscle-based products. The type of biodegradable plastic chosen is oxo-degradable. Based on survey conducted through questionnaire and AHP analysis, the most important features for active and intelligent packaging, in sequence, are antimicrobial packaging and spoilage/freshness indicator. These features can be integrated to aforementioned oxo-degradable by the addition of silver-based antimicrobial agent and anthocyanine-based pH indicator into plastic masterbatches during extrusion process., Perishable products are products which eventually degrade in quality and safety as time passes by. One example of perishable product is food. This research aims to design the concept of biodegradable active & intelligent packaging used for food products, particularly muscle-based products. The type of biodegradable plastic chosen is oxo-degradable. Based on survey conducted through questionnaire and AHP analysis, the most important features for active and intelligent packaging, in sequence, are antimicrobial packaging and spoilage/freshness indicator. These features can be integrated to aforementioned oxo-degradable by the addition of silver-based antimicrobial agent and anthocyanine-based pH indicator into plastic masterbatches during extrusion process.]"
2015
T43703
UI - Tesis Membership  Universitas Indonesia Library
cover
Thareq Wibisono
"Proses injection molding adalah salah satu tipe proses manufactur yang sangat menguntungkan dari segi presisi dan kapabilitas produksi massa. Sifat bawaan dari proses inilah yang memberikan dampak positif bagi pembuatan alat-alat medis. Salah satu alat medis yang diuntungkan adalah Cranio Maxillofacial miniplate untuk rekonstruksi wajah. Pada paper ini, kami menyajikan desain cetakan (mold) untuk miniplate Cranio-Maxillofacial untuk proses injection molding. Kami memfokuskan studi kami terutama pada prediksi efek lokasi gating, kondisi pemrosesan injeksi, dan desain sistem feed (sprue, dan runner) pada kualitas (indikasi degradasi material, cacat permukaan, penyusutan volumetrik, defleksi atau lengkungan produk, kapabilitas filling, dan weld lines) cetakan menggunakan pendekatan analitis dan numerik. Penyelidikan mengungkapkan proporsi efek dari masing-masing faktor tersebut terhadap hasil produk cetakan.  Selain itu, kami juga secara analitis memprediksi desain sistem ejeksi optimal untuk menghindari efek degradilitas baik pada produk cetakan maupun pin ejektor itu sendiri. Terakhir, kami mencoba mendesain mold base berdasarkan analisis kami.

The injection molding manufacturing process is a lucrative manufacturing option for precision product and mass production. Such nature of injection molding provides an advantageous benefit to the medical device products. One of the devices is the Cranio Maxillofacial miniplate for facial reconstruction. In this paper, we present the molding design for Cranio-Maxillofacial miniplate for injection molding process. We focus our study mainly on the effect prediction of the gating location, injection processing condition, and the feed system design on the quality (indication of material degradation and surface defects), the volumetric shrinkage, and the deflection or warpage of the molding products using analytical and numerical approaches. The investigation reveals the effect proportion of each of the said factors to the molding product result. In addition, we also analytically predict the optimal ejection system design that avoid a degrading effect for both to the molding products and the ejector pin itself. Lastly, we try to design the mold base based on our analysis."
Jakarta: Fakultas Teknik Universitas Indonesia, 2022
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Ratih Azsarinka
"Salah satu jenis polimer alam, selulosa yang terkandung dalam kulit jagung, dapat digunakan sebagai bahan dasar bioplastik. Tepung pati jagung maizena dengan penguat kulit jagung berukuran butir tertentu disintesis bersama kitosan dan gliserol. Bioplastik yang dihasilkan berbentuk lembaran tipis berwarna cokelat keruh. Perubahan ukuran butir dari 150 mesh menjadi 200 mesh mengubah sifat bioplastik, khususnya sifat mekanik.
Diperoleh bioplastik terbaik dengan ukuran butir 200 mesh dan komposisi kitosan 0,04 dengan kuat tarik sebesar 286,31 N/cm2, elongasi sebesar 10,19 , modulus Young sebesar 28,11 N/cm2, dan ketahanan sobek sebesar 705,61 mN. Terjadi pergeseran bilangan gelombang dan perubahan gugus fungsi pada bioplastik. Terhadap lingkungan, bioplastik mengalami degradasi sebesar 35 selama 21 hari di dalam tanah dan mulai berjamur setelah 10 hari berada dalam udara terbuka, serta mampu bertahan pada suhu 100°C selama satu jam.

One kind of biopolymer that can be used as primary materials for bioplastics is cellulose in corn husk. Corn starch powder maize with corn husk filler in different grain size is then synthesized with chitosan and glycerol. The resulting bioplastics is thin film in form with muddy brown color. Alterating the powder grain size from 150 mesh to 200 mesh modifies the physical characteristics, especially mechanical properties.
The most optimal bioplastics were obtained with 200 mesh grain size and 0.04 wt chitosan composition with tensile strength of 286.31 N cm2, elongation of 10.19, Young modulus of 28.11 N cm2 and tear resistance of 705.61 mN. There are shifts in peak absorbance wavenumber and changes in some functional groups. To the environment, bioplastics were degraded 35 for 21 days in soil and started moldy after 10 days in open air, as well as endured for one hour in temperature 100°C.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
S68532
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nicholson, John W.
Crambridge: The Royal Society of Chemistry, 1991
547.7 NIC c
Buku Teks  Universitas Indonesia Library
cover
Young, Robert J.
London: Chapman and Hall, 1991
547.7 YOU i
Buku Teks  Universitas Indonesia Library
cover
Young, Robert J.
Boca Raton : CRC Press, 2011
547.7 YOU i
Buku Teks  Universitas Indonesia Library
cover
Hoboken, New Jersey : Wiley, 2012
668.4 ANT
Buku Teks  Universitas Indonesia Library
cover
Adam Febriyanto Nugraha
"Polylactic acid merupakan material biopolimer yang memiliki keunggulan karena kekuatannya yang tinggi namun memiliki kekurangan yakni laju kristalisasinya yang rendah sehingga membutuhkan waktu yang lama dalam proses. Penambahan plasticizer diketahui memiliki pengaruh dalam meningkatkan derajat kristalinitas polimer dan sifat termalnya. Penelitian ini bertujuan untuk mempelajari pengaruh penambahan diethylene glycol dibenzoate terhadap sifat termal dan derajat kristalinitas polylactic acid. Plasticizer triacetine digunakan sebagai pembanding. Proses pencampuran polylactic acid dilakukan dengan pelarut organik Dichlorometane dengan menggunakan magnetic stirrer selama 2 jam, kemudian ditambahkan plasticizer dengan persentase 0wt%, 5wt%, 10wt% dan 20wt% dengan proses mixing selama 5 menit. Seluruh sampel dilakukan proses hotpress dengan suhu 180°C dan beban 8 ton selama 5 menit.
Interaksi antara molekul polylactic acid dengan plasticizer diamati dengan uji FTIR, sifat termal dan kristalinitas polylactic acid diamati dengan uji DSC dan kristalinitas dikonfirmasi dengan XRD. Perlakuan annealing diberikan untuk melihat laju kristalisasi polylactic acid setelah penambahan plasticizer. Hasilnya, dengan penambahan diethylene glycol dibenzoate 5-20wt% memberikan perubahan sifat termal polylactic acid dengan nilai Tg dari 46,5°C menjadi 39,4-21,1°C, Tcc dari 112,8°C menjadi 107,5-84,6°C, Tm dari 170,6°C menjadi 167-160°C, dan derajat kristalinitasnya dari 5,05% menjadi 7,47-17,20%. Penambahan triacetine 5-20wt% memberikan perubahan sifat termal dengan nilai Tg dari 46,5°C menjadi 42,1-32,4°C, Tcc dari 112,8°C menjadi 100,7-88,4°C, Tm dari 170,6°C menjadi 168,3-163,1°C dan derajat kristalinitasnya 5,05% menjadi 8,38-15,05%.

Polylactic acid is a biopolymer which have an exellence strength but low rate of crystallization so it will take long cycle time in mass production. The addition of plasticizer known to have an influence in increasing the degree of crystallinity of the polymer and its thermal properties. This research aims to study the effect of the addition of diethylene glycol dibenzoate on the thermal properties and the degree of crystallinity of polylactic acid. Triacetine used as plasticizer for comparation. Polylactic acid mixed by organic solvent, Dichloromethane, by magnetic stirrer for 2 hours and then added by 0wt%, 5wt%, 10wt% and 20wt% plasticizer for 5 minutes. All of samples was hot pressed at 180°C by 8 ton load for 5 minutes.
Molecular interaction between polilactic acid and the plasticizers observed by FTIR testing, thermal properties and crystallinity of polylactic acid observed with DSC testing and confirmation by XRD. Annealing treatment given to see the rate of crystallization of polylactic acid after the addition of plasticizer. The result, diethylene glycol dibenzoate change polylactic acid thermal properties with Tg values from 46,5°C to 39,4-21,1°C, Tcc from 112,8°C to 107,5-84,6°C, Tm from 170,6°C to 167-160°C, and the degree of crystallinity from 5,05% to 7,47-17,20%. Triacetine 5-20wt% change polylactic acid thermal properties with Tg values from 46,5°C to 42,1-32,4°C, Tcc from 112,8°C to 100,7-88,4°C, Tm from 170,6°C to 168,3-163,1°C and the degree of crystallinity from 5,05% to 8,38-15,05%."
Depok: Fakultas Teknik Universitas Indonesia, 2013
S46335
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>