Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 115363 dokumen yang sesuai dengan query
cover
Dick Ferieno Firdaus
"ABSTRAK
Dalam penelitian ini, polyurethane dengan bahan dasar Polyethylene Glycol (PEG mw:6000) sebagai macrodiol atau soft segment, 4,4′-Methylenebis(cyclohexyl isocyanate) (HMDI) sebagai hard segment dan 1,1,1-Trimethylol Propane (TMP) sebagai chain extender digunakan sebagai material kandidat shape memory. Bahan komposit yang digunakan adalah partikel nano magnetite (Fe3O4) berukuran 20-50nm. Variasi komposisi digunakan sebagai variabel dengan pengujian yang dilaksanakan adalah FTIR (Fourier Transform Infrared Spectroscopy) dan NMR (Nuclear Magnetic Resonance) untuk menginvestigasi rantai polimer yang terbentuk, FE-SEM (Field Emission Scanning Electron Microscopy) untuk melihat interface yang terbentuk antara bahan kompositik dan matriks serta pengujian tarik dengan UTM (Universal Testing Machine) dan STA (Simultaneous Thermal Analysis) untuk analisa kekuatan mekanis dan uji recovery fisik. Uji XRD juga dilakukan untuk mengetahui kristalinitas parsial dari sampel. Pada penelitian ini diketahui bahwa, penambahan HMDI yang lebih banyak akan memicu separasi fasa, komposisi terbaik yang didapatkan adalah sampel dengan perbandingan 1 mol PEG, 6 mol HMDI, 2 mol TMP dan 1 mol partikel nano Fe3O4 dengan Rf dan Rr yang cukup baik, yaitu masing-masing 94,4% dan 97,22% walaupun kekuatan tarik yang didapatkan masih minim yaitu 0.61 MPa. Secara umum, antarmuka diantara partikel nano Fe3O4 adalah kompatibel secara fisik dan kimiawi yang dibuktikan dari hasil Gambar SEM dan spektra FTIR. Penambahan partikel nano Fe3O4 juga dibuktikan oleh pengujian STA dapat menurunkan kristalinitas namun akan meningkatkan Tm dari SMPU.
Kata kunci: biomedik; Fe3O4, HMDI; magnetite; nanokomposit; PEG; SMPU
ABSTRACT
In this study, polyurethane with Polyethylene Glycol (PEG MW: 6000) as macrodiol or soft segment, 4,4'-Methylenebis (Cyclohexyl isocyanate) (HMDI) as hard segment and 1,1,1-Trimethylol propane (TMP) as a chain extender will be used as a candidate for shape memory material. Composite materials used are 20-50nm nanoparticles of magnetite (Fe3O4). Variations in the composition used as a variable with some characterizations performed using FTIR (Fourier Transform Infrared Spectroscopy) and NMR (Nuclear Magnetic Resonance) to investigate the formation of polymer chains, FE-SEM (Field Emission Scanning Electron Microscopy) to see the interface formed between the filler material and matrix and tensile testing with UTM (Universal testing Machine) and STA (Simultaneous Thermal Analysis) for the analysis of mechanical strength and physical recovery. XRD test was also conducted to determine the partial crystallinity of the sample. In this research it was shown that, the increase of the addition of HMDI will trigger phase separation. The best composition obtained was the sample with a ratio of 1 mole of PEG, 6 moles of HMDI, 2 moles of TMP and 1 mol Fe3O4 nanoparticles with Rf and Rr are pretty good, which are 94.4% and 97.22% respectively, although tensile strength obtained still considered low which is 0.61 MPa. In general, the interface between Fe3O4 nanoparticles are physically and chemically compatible as evidenced from the results of SEM images and FTIR spectra. The addition of Fe3O4 nanoparticles was also shown by the STA results can reduce the crystallinity, but will increase the Tm of the shape memory polyurethane"
2015
S58464
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dessy Ayu Lestari
"ABSTRAK
Shape Memory Polymer adalah material yang memiliki kemampuan untuk ‘mengingat’ bentuk makroskopis (permanen) setelah dideformasi menjadi bentuk sementara (dormant) di bawah kondisi temperatur dan stress tertentu. Perkembangan material ini didominasi oleh Polyurethane (SMPU) yang saat ini sedang diarahkan untuk aplikasi bidang biomaterial. Dalam penelitian ini, digunakan polyurethane dengan bahan dasar Polyethylene Glycol (PEG mw:6000) sebagai macrodiol atau soft segment, 4,4′-Methylenebis(cyclohexyl isocyanate) (HMDI) sebagai hard segment dan 1,1,1-Trimethylol Propane (TMP) sebagai chain extender yang akan digunakan sebagai crosslink agent. Bahan komposit yang digunakan adalah partikel nanomagnetite (Fe3O4) berukuran 20-50nm. Variasi yang digunakan sebagai variabel adalah variasi hard segment 4,4′-Methylenebis(cyclohexyl isocyanate) (HMDI). Pengujian yang dilaksanakan adalah FTIR (Fourier Transform Infrared Spectroscopy) untuk mengetahui ikatan kimia dan struktur molekul yang terbentuk secara kualitatif, NMR (Nuclear Magnetic Resonance) untuk pengujian struktur molekul secara kuantitatif, STA (Simultaneous Temperature Analysis) untuk mengetahui ΔH,Tg dan Tm, dan aktuasi fisik untuk menghitung waktu recovery material. Efek komposisi HMDI dan bahan kompositik terhadap sifat molekul SMPU akan dibahas secara detil beserta analisa potensinya untuk aplikasi biomaterial.

ABSTRACT
Shape memory polymer is a material with ability to ‘remember’its macroscopic or permanent after deformation into a temporary shape (dormant) under a specific temperature and stress condition. The development of this material is dominated by Polyurethane (SMPU), which is directed into biomaterial application nowadays. Polyurethane used in this research as macrodiol or soft segment, 4,4′-Methylenebis(cyclohexyl isocyanate) (HMDI) as hard segment, and 1,1,1-Trimethylol Propane (TMP) as chain extender used as crosslink agent. Composite material used is 20-50 nm nanomagnetite (Fe3O4) particle. Variable used are variation in hard segment 4,4′-Methylenebis(cyclohexyl isocyanate). Test which was conducted are FTIR (Fourier Transform Infrared Spectroscopy) to determine the formed chemical bonds and molecular structure of product qualitatively, NMR (Nuclear Magnetic Resonance) to identify the molecular structure of product quantitatively, STA (Simultaneous Temperature Analysis) to determine the value of ΔH,Tg and Tm, and also physical actuation to figure the recovery time of material. The composition effect of HMDI and composite material toward molecular properties of SMPU will be discussed in detail along with analysis of its potential for biomaterial application.
"
2015
S60201
UI - Skripsi Membership  Universitas Indonesia Library
cover
Masrudin
"ABSTRAK
Shape Memory Polyurethane (SMPU) telah disintesis dari penambahan polyethylene glycol (PEG-6000) sebagai segmen lunak dan 4,4'-Methylenebis (Cyclohexyl isocyanate) (HMDI) sebagai segmen keras serta 1,1,1-Trimethylol propane (TMP) sebagai chain extender. SMPU lalu ditambahkan nanopartikel Fe3O4 berukuran 20-50 nm untuk meningkatkan sifat kemagnetan. Untuk mengkonfimasi bentuk ikatan antarmuka komposit SMPU digunakan FTIR (Fourier Transform Infrared Spectroscopy). FE-SEM digunakan untuk mengetahui interface dari filler dan matriks SMPU. Konfirmasi nilai kemagnetan menggunakan VSM (vibrating sampel magnetometer) dan pengujian tarik menggunakan microtensile menunjukkan bahwa penambahan Fe3O4 dengan persentase 11 wt% menghasilkan nilai kemagnetan dan sifat mekanik tertinggi.

ABSTRACT
Shape Memory Polyurethane (SMPU) has been synthesized by reacting polyethylene glycol (PEG-6000) as softsegment, 4,4'-Methylenebis (Cyclohexyl isocyanate) (HMDI) as hardsegment and 1,1,1-Trimethylol propane (TMP) as chain extender. SMPU was added by Fe3O4 as filler to provide magnetical property. Magnetite which had confirmed by Scanning Elctron Magnetic (SEM) have size 20-50 nm. Functional group was investigated by FTIR (Fourier Transform Infrared Spectroscopy). The magnetic behavior of the nanocomposites was observed by vibrating sample margnetometer (VSM). FE-SEM is used to acknowledge interface between filler and Shape Memory Polyurethane (SMPU) matrix. Mechanical properties tested by microtensile testing showed adding 11% Fe3O4 obtaining magnetic and nanocomposites SMPU resulted in improved materials with higher magnetical and mechanical properties."
2015
S59575
UI - Skripsi Membership  Universitas Indonesia Library
cover
Mutya Rahmah Arbi
"ABSTRAK
Polyurethane dengan bahan dasar Polyethyelene Glycol (PEG mw: 6000) sebagai soft segment, 4,4’-methyelenebis(cyclohexyl isocyanate) (HMDI) sebagai hard segment dan 1,1,1-trimethylol propane (TMP) sebagai chain extender digunakan untuk membuat material dengan shape memory berbasis polimer. Bahan komposit yang digunakan adalah partikel nan magnetit Fe3O4 berukuran 20-50nm. Variasi komposisi HMDI digunakan sebagai variabel dengan pengujian yang dilakukan adalah FTIR (Fourier Transform Infrared Spectroscopy) dan NMR (Nuclear Magnetic Resonance) untuk menginvestigasi rantai polimer yang terbentuk dan menghitung perbandingan hard segment dan soft segment di dalam material, UTM (Universal Testing Machine) dan Aktuasi Fisik untuk menganalisa kekuatan mekanis dap uji recovery fisik dan Uji STA (Simultanoeus Thermal Analysis) untuk menganalisa pengaruh kristalinitas terhadap sifat mekanik. Dari penelitian ini diketahui bahwa, penambahan komposisi HMDI yang lebih banyak akan meningkatkan sifat mekanik nanokomposit SMPU, namun kadar HMDI yang berlebihan justru akan menurunkan sifat mekanisnya. Dari hasil observasi juga didapatkan bahwa penambahan HMDI akan memicu terjadinya separasi fasa yang akan memeberikan efek shape memory pada sampel. Komposisi terbaik yang didapatkan adalah sampel dengan perbandingan 1 mol PEG, 7 mol HMDI, 2 mol TMP dan 1 mol partikel dan Fe3O4 dengan Rf dan Rr yang baik yaitu 100% dengan kekuatan tarik yang masih cukup baik yaitu 4,1 MPa.

ABSTRACT
In this study, polyurethane was synthesized with Polyethylene Glyocol (PEG mw: 6000) as soft segment, 4,4'-Methylenebis (Cyclohexyl Isocyanate) (HMDI) as hard segment and 1,1,1-Trimethylol Propane (TMP was a chain extender will be used to make a shape memory material polymer based. 20-50nm nanoparticles of magnetite (Fe3O4) bas Led as Filler material. Variations in composition of HMDI used as a variable with some characterization perforrmed using FTIR (Fourier Transform Infrared Spectroscopy) to investigate the formation of polymer chains and to examine the percentation of hard segment and soft segment content, UTM (Universal Testing Machine) and Physical Actuation to analyze tensile strength and physical recovery. STA (Simultanoeus Thermal Analysis) to analyze effect of crystallization on mechanical properties. In this research it was shown that the incrase of addition of HMDI will increase mechanical properties, but the exceed of HMDI composition made the mechnical properties decrease. Besides, increasing HMDI composition will trigger phase separation that leads to shape memory effect. The best composisiton obtained was sample with ratio of 1 mol of PEG, 7 moles of HMDI, 2 moles of TMP and 1 mol Fe3O4 nanoparticle with Rf and Rr are excellent which are 100% for both of them and tensile strength obtained is pretty good which is 4,1 MPa"
2015
S59574
UI - Skripsi Membership  Universitas Indonesia Library
cover
Didin Sahidin Winatapura
"A magnetic Fe3O4@ZnO nanocomposite (NC) was successfully synthesized by a wet milling method using a high energy milling (HEM) machine. The magnetic Fe3O4@ZnO NC was characterized by an X-ray Diffractometer (XRD), scanning and transmission electron microscopes (SEM and TEM), and a vibrating sample magnetometer (VSM). X-ray diffraction results show that Fe3O4@ZnO NC consisted of ZnO and Fe3O4 phases. The microstructure analysis indicated that Fe3O4@ZnO NC presented a ZnO shell wrapped around the surface of a magnetic Fe3O4 surface. The average diameter of the aggregated Fe3O4 nanoparticle (NP) is 20 nm, while that of Fe3O4@ZnO NCs is nearly 30 nm. The Fe3O4 NP and Fe3O4@ZnO NC show typical superparamagnetic behavior with low coercivity. The saturation magnetization (Ms) of Fe3O4 NP was measured at about 66.26emu.g-1 and then declined to 34.79emu.g-1 after being encapsulated with a ZnO shell. The photoactivities of the Fe3O4@ZnO NC under UV irradiation were quantified by the degradation of a methylene blue (MB) dye solution. The result reveals that the photodegradation efficiency of Fe3O4@ZnO NC is favorable at pH neutral (pH = 7) reaching 100%. By increasing the MB dye concentration from 10 ppm to 40 ppm, the photodegradation efficiency decreases from 100% to 52%. The Fe3O4@ZnO NC can be easily collected by an external magnet. The magnetic Fe3O4@ZnO NC could be extended to various potential applications, such as purification processes, catalysis, separation, and photodegradation."
Depok: Faculty of Engineering, Universitas Indonesia, 2016
UI-IJTECH 7:3 (2016)
Artikel Jurnal  Universitas Indonesia Library
cover
Yossy Anggraini
"Selulosa yang digunakan untuk sintesis nanokomposit berasal dari hasil isolasi sekam padi. Nanokomposit selulosa-Fe3O4 memiliki sifat unggul yang berasal dari gabungan sifat selulosa dan juga Fe3O4. Hasil sintesis yang diperoleh didukung dengan karakterisasi menggunakan instrumentasi FTIR, SEM, TEM, XRD dan GC-MS. Persen yield selulosa hasil isolasi diperoleh sebesar 54.066 . Hasil sintesis nanokomposit berbasis selulosa-Fe3O4 untuk selanjutnya diaplikasikan sebagai katalis untuk sintesis metil oleat yang menjadi alternatif penting dalam pembuatan biodiesel, karakterisasi menggunakan GC-MS dan penentuan angka asam. Kondisi optimum pembentukan metil oleat dari asam oleat, yaitu pada suhu 60oC selama 300 menit dengan komposisi katalis 12 mg nanokomposit selulosa-Fe3O4. Diperoleh persen konversi sebesar 89,57 . Reaksi pembentukan metil oleat dari asam oleat mengikuti kinetika orde satu dan diperoleh energi aktivasi sebesar 14.03 kJ/mol.

Cellulose can be isolated from rice husk that will be used in the synthesis of cellulose Fe3O4 nanocomposite, which will have advantages that come from both materials behaviors. The synthesis product is supported by characterization using FTIR, SEM, TEM, XRD and GC MS. The yield percentage obtained from the isolation is 54.066 . the product of nanocomposite synthesis based on cellulose Fe3O4 can be applied as a catalyst for methyl oleate synthesis which is an important alternative in the making of biodiesel, with characterization using GC MS and acid value calculation. The optimal condition of methyl oleate synthesis from oleoc acid is under the temperatureof 600C for 300 minutes with catalyst composition of 12 mg. Conversion percentage is obtained at 89.21 . the reaction of methyl oleate synthesis from oleic acid follows the first order of kinetic and the activation energyis obtained at 14.03 kJ mol.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Lukman Satrio Adi
"Dalam beberapa waktu terakhir, banyak peneliti yang tertarik dalam memonitor asam galat. Hal ini dikarenakan asam galat memiliki banyak manfaat bagi kesehatan manusia, seperti antioksidan, antikanker, dan antiinflamasi. Asam galat dapat ditemukan dalam berbagai macam makanan, seperti sayur-sayuran dan buah-buahan. Namun, keberadaannya dalam sayur-sayuran dan buah terkendala dengan matriks yang kompleks sehingga diperlukan pemisahan yang selektif. Dari berbagai macam metode untuk memonitor asam galat seperti ekstraksi pelarut, HPLC fasa terbalik, dan LC-MS, metode molecular imprinted polymer disebut sebagai salah satu metode yang paling menjanjikan. Molecular imprinted polymer dinilai memiliki banyak keunggulan, diantaranya dapat disintesis dengan biaya yang murah, memiliki kestabilan yang baik pada berbagai macam kondisi fisika dan kimia, serta memiliki reusabilitas yang baik. Pada penelitian ini, dilakukan sintesis Molecular Imprinted Polymer dengan asam galat sebagai template dengan monomer metil metakrilat. Polimerisasi dilakukan secara polimerisasi bulk dengan penambahan pengikatsilang EGDMA dan inisiator AIBN. NIP sebagai perbandingan disintesis (tanpa penambahan template asam galat). Polimer hasil sintesis (MIP dan NIP) dikarakterisasi dengan FTIR, SEM, UV-Vis, dan TGA. Hasil karakterisasi FTIR menunjukkan puncak pada 1161 cm-1 yang menunjukkan gugus karbonil pada ester hasil pengikatsilangan dengan EGDMA. Pada karakterisasi SEM, memperlihatkan morfologi dengan struktur yang tidak beraturan dengan permukaan yang tidak rata. Produk MIP memiliki kestabilan termal yang baik dengan kehilangan massa sebesar 63,09% hingga suhu 300 °C yang dibuktikan dengan instrumentasi TGA. Adsorpsi maksimum asam galat didapatkan pada waktu optimum 90 menit dengan % adsorpsi sebesar 85,64% dan qe sebesar 3,67 mg/g.

In recent times, many researchers have become interested in monitoring gallic acid. It because gallic acid has many human health benefits, such as antioxidants, anticancer and anti-inflammatory properties. Gallic acid can be found in a variety of foods, such as vegetables and fruits. However, its presence in vegetables and fruit is constrained by a complex matrix, therefore selective separation is required. Various methods for monitoring gallic acid such as solvent extraction, reverse phase HPLC, and LC-MS, the molecular imprinted polymer method is cited as one of the most promising methods. Molecular imprinted polymer has many advantages, such as it can be synthesized at a low cost, has good stability under various physical and chemical conditions, and has good reusability. In this study, the synthesis of molecular imprinted polymer with gallic acid as a template with methyl methacrylate as a functional monomer. The polymerization was carried out by bulk polymerization with the addition of an EGDMA as a cross-linker and an AIBN initiator. Non imprinted polymer for comparison was synthesized (without addition of gallic acid template) as a control. The synthesized polymers (MIP and NIP) were characterized by FTIR, SEM-EDX, UV-Vis, and TGA. FTIR characterization peak was obtained at 1161 cm-1 which showed the carbonyl group on the ester resulting from cross-linking with EGDMA. In SEM characterization, which regulates the morphology with an irregular structure with an uneven surface. The MIP product has good thermal stability with mass loss of 63.09% up to 300 °C as evidenced by TGA instrumentation. The maximum adsorption of gallic acid was obtained at an optimal time of 90 minutes with % adsorption of 85.64% and qe of 3.67 mg/g."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ghufran Aulia
"Saat ini Negara Indonesia mengalami penurunan terhadap produksi sumber daya energi minyak. Penurunan tingkat produksi minyak tersebut akibat sumur minyak tua yang memiliki jumlah minyak yang terperangkap dalam pori pori batuan cukup banyak, Minyak yang terperangkap setelah primary recovery sekitar 60-70 %. Sehingga dibutuhkan metode EOR untuk meningkatkan produksi minyak pada sumur minyak tua. Pada penelitian ini telah dilakukan sintesis nanopartikel dengan metode kopresipitasi dengan komposisi prekursor Fe3+ serta Fe2+ pada perbandingan 2:1 serta karakterisasi terhadap magnetik nanopartikel Fe3O4 (MNPs), nanokomposit Fe3O4 yang dimodifikasi dengan penambahan asam oleat pada prekusornya (MNPs/OA),nanopartikel tersalut oleh polimer poliakrilamida yang disintesis dengan menggunakan monomer akrilamida dan inisiator kalium persulfat (K2S2O8) sebagai prekursor untuk menyalut nanopartikel (MNPs/PAM 1), dan poliakrilamida (PAM) komersial (MNPs/PAM 2). Tujuannya adalah untuk melihat efek morfologi, sifat dari nanopartikel dan nanokomposit yang distabilisasi pada 5000 ppm air salinitas dengan variasi konsentrasi nanopartikel yang sangat kecil (0,1%, 0,5%, 0,9%), untuk meningkatkan nilai recovery Original Oil in Place (OOIP), pada kondisi batupasir (sandpack) dengan suhu rendah. Pada tiga variasi konsentrasi dengan 4 jenis nanopartikel, nanokomposit MNPs/PAM 2 memiliki rata rata recovery OOIP paling tinggi, yaitu sebesar 19,14% karena MNPs/PAM 2 merupakan nanopartikel hidrofilik, selain itu MNPs/PAM 2 memiliki mobility ratio yang sangat baik karena viskositasnya yang tinggi serta kestabilan nanopartikel yang cukup baik dalam air salinitas berkonsentrasi rendah (5000 ppm) seperti MNPs, dan MNPs/PAM 2. MNPs, MNPs/OA, dan MNPs/PAM memiliki rata rata nilai recovery OOIP sebesar 7,63%, 6,4%, 12,37%. MNPs/OA memiliki rata rata nilai recovery OOIP paling rendah dibandingkan nanokomposit lainnya, karena MNPs/OA memiliki sifat hidrofobik pada permukaannya yang menyebabkan mobility ratio nanokomposit rendah serta kestabilannya didalam air salinitas tidak terlalu baik, hal ini dikarenakan MNPs/OA cenderung untuk tidak terdispersi didalam air salinitas akibat adanya efek Van Der Walls.

At present Indonesia has experienced a decline in the production of oil energy resources. The decrease in the level of oil production is due to old oil wells that have a large amount of oil trapped in the pores. Around 60 - 70 percent oil content was trapped in pores. So that the EOR method is needed to increase oil production in old oil wells. In this study nanoparticles were synthesized by coprecipitation method with the composition of Fe3+ and Fe2+ at a ratio of 2:1 and characterization of magnetic Fe3O4 nanoparticles (MNPs), modified Fe3O4 nanocomposite by adding oleic acid to its precursor (MNPs/OA), the nanoparticles are coated by polyacrylamide polymers which are synthesized using acrylamide monomers and initiators of potassium persulfate (K2S2O8) as precursors for coating nanoparticles (MNPs/PAM 1), and commercial polyacrylamide (PAM) (MNPs/ PAM 2). The aim was to see the morphological effects, properties of nanoparticles and nanocomposites stabilized at 5000 ppm salinity water with very small variations in the concentration of nanoparticles (0,1%, 0,5%, 0,9%), to increase recovery values of Original Oil in Place (OOIP), at low temperature sandstones. In three variations of concentration with 4 types of nanoparticles, MNPs / PAM 2 nanocomposite has the highest average OOIP recovery, which is equal to 19,14% because MNPs/PAM 2 is hydrophylic nanoparticles, besides MNPs / PAM 2 has a very good mobility ratio because of its high viscosity and sufficient stability of nanoparticles in low concentrated salinity water (5000 ppm) such as MNPs, and MNPs/PAM 2. MNPs, MNPs/OA and MNPs/PAM have average recovery values of OOIP are7,63%, 6,4%, 12,37%. MNPs/OA has the lowest average value recovery OOIP compared to other nanocomposite, because MNPs/OA have hydrophobic properties on the surface that cause low nanocomposite mobility ratios and their stability in salinity water are not very good, this is because MNPs/OA tend not to be dispersed in salinity water due to the vanderwalls effect which causes ion charges between particles to repel each other.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Adisti Mutia Pradiyanti
"Metode semi-Interpenetrating Polymer Network (Semi-IPN) merupakan salah satu metode untuk mensintesis hidrogel. Pada metode semi-IPN, kitosan mengalami ikat silang dengan agen pengikat silang asetaldehida/ formaldehida/ glutaraldehida membentuk jaringan polimer kitosan terikat silang yang kemudian berinteraksi dengan polimer metil selulosa yang berbentuk linier. Umumnya derajat ikat silang dan rasio swelling hidrogel semi-IPN akan dipengaruhi oleh waktu reaksi, rasio komposisi kitosan-metil selulosa, dan jenis agen pengikat silang yaitu asetaldehida, formaldehida, dan glutaraldehida. Kemampuan swelling dan derajat ikat silang hidrogel kitosan-metil selulosa semi-IPN yang optimum didapat pada rasio kitosan/metil selulosa 60:40 (b/b), agen pengikat silang formaldehida 2% (b/b), dan waktu reaksi 3 jam yaitu persen rasio swelling 785,6 % dan derajat ikat silang 50,8 %. Hidrogel kitosan-metil selulosa dengan metode semi-IPN memiliki rasio swelling dan derajat ikat silang lebih besar dibandingkan dengan hidrogel kitosan nonkovalen. Karakterisasi hidrogel kitosan-metil selulosa semi-IPN dilakukan dengan instrumen Fourier Transfrom Infra Red (FTIR), Differential Scanning Calorimetry (DSC), dan Scanning Electron Microscope (SEM).

Semi-Interpenetrating Polymer Network (semi-IPN) method is one of many methods which used to synthesize hydrogels. In semi-IPN method, chitosan was crosslinked with crosslinking agent acetaldehyde/ formaldehyde/ glutaraldehyde to form crosslinked chitosan polymer network that will interracts with methyl cellulose polymer which have linear form. In general, degree of crosslinking and swelling ratio of semi-IPN hydrogels were influenced by reaction time, composition ratio of chitosan-methyl cellulose, and crosslinking agent acetaldehyde, formaldehyde, and glutaraldehyde. Swelling ability and degree of crosslinking of chitosan-methyl cellulose hydrogel with semi-IPN method optimally reach at chitosan/methyl cellulose ratio 60:40 (b/b) with formaldehyde crosslinking agent in 3 hours reaction time is 785,6 % swelling ratio and 50,8 % degree of crosslinking. Chitosan-methyl cellulose hydrogel with semi-IPN method has higher swelling ratio and degree of crosslinking compared to noncovalent chitosan hydrogel. Characterization of chitosan-methyl cellulose semi-IPN hydrogel using Fourier Transfrom Infra Red (FTIR), Differential Scanning Calorimetry (DSC), dan Scanning Electron Microscope (SEM) instrument.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2015
S60402
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rhadiathul Wahyuli
"Nanokomposit berbasis biopolimer yang mengalami adsorpsi ion logam pada permukaan bahan pendukung magnetik memiliki kemampuan katalitik lebih baik sehingga menarik untuk dikembangkan sebagai katalis dalam reaksi reduksi 4-nitrofenol. Nanokomposit NaAlg-CMC/Fe3O4 dan NaAlg-CMC/Fe3O4-Cu telah berhasil disintesis yang didukung dengan karakterisasi menggunakan FTIR, XRD dan SEM-EDS Mapping. NaAlg-CMC merupakan biopolimer yang bertindak sebagai support katalis dan dapat membentuk komposit dengan sifat yang baik saat digabungkan dengan Fe3O4. Nanokomposit NaAlg-CMC/Fe3O4 dapat digunakan sebagai adsorben yang baik dalam penghilangan ion Cu2+. Kondisi optimum diperoleh pada berat nanokomposit 50 mg, pH 5,5, rasio NaAlg-CMC/Fe3O4 2:1, waktu kontak 90 menit dengan persen penghilang 97,80% dan kapasitas adsorpsi 48,9018 mg/g. Isoterm adsorpsi ion Cu2+ mengikuti model isoterm adsorpsi Langmuir dengan R2 sebesar 0,9944. Nanokomposit NaAlg-CMC/Fe3O4-Cu dapat menjadi katalis yang baik dalam reduksi katalitik 4-nitrofenol dengan persen reduksi sebesar 92,95 pada berat katalis 45 mg dan waktu reaksi 11 menit. Studi kinetika reaksi reduksi 4-nitrofenol menjadi 4-aminofenol mengikuti kinetika reaksi orde pertama dengan persamaan v = 0,2592 menit-1 [4-NP]. Nanokomposit yang diperoleh dapat menjadi solusi untuk mengurangi logam berat dan polutan organik yang ramah lingkungan.

Biopolymer-based nanocomposite with adsorbed metal ions on the surface of magnetic support has better catalytic ability that is interest to be developed as a catalyst in the reduction of 4-nitrofenol. SA-CMC/Fe3O4 and SA-CMC/Fe3O4-Cu have been successfully synthesized and supported by characterization using FTIR, XRD and SEM-EDS Mapping. SA-CMC is a biopolymer-based composite as a supporting catalyst and able to form composites with good properties when combined with Fe3O4. SA-CMC/Fe3O4 nanocomposites can be used as good adsorbents of Cu2+ in wastewater. The optimum conditions were obtained by the adsorbent dosage 50 mg, pH 5.5, ratio of SA-CMC/Fe3O4 2:1, contact time 90 minutes with efficiency removal 97.80% and maximum adsorption capacity reached 48,9018 mg/g. The adsorption process of Cu2+ removal follows the Langmuir adsorption isotherm model. SA-CMC/Fe3O4-Cu nanocomposite can be a good catalyst in the reduction of 4-nitrophenol with percent of reduction 92.95% by amount of catalyst 45 mg and reaction time 11 minutes. Study kinetics of reduction 4-nitrophenol to 4-aminophenol follows pseudo-first-order reactions with equation v = 0,2592 min-1 [4-NP]. Nanocomposite can remove heavy metal and organic pollutant in wastewater that are environmentally friendly.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>