Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 118169 dokumen yang sesuai dengan query
cover
Sandi Wibisono
"Karakterisasi Reservoar pada Lapangan Migas ?Boonsville? telah dilakukan menggunakan metode inversi seismik dan metode geostatistik. Kedua teknik tersebut saling melengkapi dimana metode inversi seismik mengacu pada data seismik sedangkan metode geostatistik mengacu pada data sumur. Dengan mengintegrasikan konsep inversi seismik dan geostatistik dapat dipetakan distribusi reservoar secara lateral.
Pada studi ini, teknik inversi seismik yang digunakan adalah teknik inversi "Model Based" sedangkan teknik geostatistik yang digunakan adalah teknik "Kriging" dan "Co-Kriging". Teknik integrasi ini diaplikasikan pada data seismik 3D yang memiliki cakupan 133 inline (74 - 206), dan 97 xline (105 - 201). Data sumur yang digunakan adalah tujuh sumur yang memiliki log densitas dan log sonic. Hasil integrasi kedua teknik tersebut memperlihatkan pola persebaran reservoar dengan trend berarah dari barat daya ke timur laut.

Reservoir characterization of ?Boonsville? Oil and Gas field has been carried out using seismic inversion and geostatistic method. These methods are completing each other, in which seismic inversion method is referring to seismic data, while geostatistic method is referring to well data. By integrating both seismic inversion and geostatistic methods, lateral reservoir distribution map could be generated.
In this study, the seismic inversion is performed by using "Model Based" inversion algorithm, while the geostatistic is carried out by using "Kriging" and "Co- Kriging" technique. This integrating technique is applied to 3D seismic data, which consists of 133 inline (74 - 206), and 97 xline (105 - 201). The well data set consists of seven wells, which is completed by sonic and density log. The result of both methods are showing reservoir distribution trend on south-west to north-east direction.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2010
S29393
UI - Skripsi Open  Universitas Indonesia Library
cover
Ayu Apdila Yuarthi
"Karakterisasi reservoar pada Lapangan "X" telah dilakukan menggunakan inversi impedansi akustik dan geostatistik. Kedua teknik ini dapat menghasilkan peta persebaran reservoar yang didapatkan dari impedansi akustik hasil inversi dan porositas. Selain itu, peta persebaran reservoar dapat digunakan untuk melihat litologi batuan reservoar. Daerah penelitian terletak di Lapangan "X" pada Cekungan Sumatera Tengah, Provinsi Riau.
Teknik inversi impedansi akustik yang digunakan adalah inversi model based, sedangkan teknik geostatistik yang digunakan adalah teknik cokriging. Hasil analisa terintegrasi dari kedua teknik menunjukkan bahwa daerah target mempunyai litologi batupasir ber-porous disekitar well A-1 dengan porositas tinggi pada nilai impedansi akustik 15.000-19592 ((ft/s)*(g/cc)) dan mempunyai litologi batupasir tight disekitar well A-12 dan well A-16 dengan porositas cukup rendah pada nilai impedansi akustik 15306-20204 ((ft/s)*(g/cc)) dan 15306-21429 ((ft/s)*(g/cc)).

ABSTRAK
Reservoir characterization in 'X' field has been carried out using acoustic impedance inversion and geostatistics. Both of these techniques can produce a map of the distribution reservoir that obtained from acoustic impedance inversion and porosity results. Beside that, a map of the distribution reservoir can be used to view the lithology of rocks. The research area is in "X" field at Central Sumatera Basin, Riau, Indonesia.
The acoustic impedance inversion is performed by using "model based" inversion, while the cokriging technique had been used as part of geostatistic technique. The integrated analysis results from these methods show that the reservoir in research field has porous sandstones around the well A-1 with high porosity in acoustic impedance values 15000-19592 ((ft/s) *(g/cc)) and has tight sandstone around well A-12 and well A-16 with low porosity in acoustic impedance values 15306-20204 ((ft/s) *(g/cc)) and 15306-21429 ((ft/s)*(g/cc))."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2016
S64166
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rahadian Anggit Wirawan
"Lapangan KX di Cekungan Tarakan Kalimantan Utara memiliki potensi untuk dikembangkan sebagai lapangan gas. Melalui hasil pemboran sumur KX-1 , zona reservoar pada Lapangan KX adalah reservoar batupasir delta. Penelitian ini bertujuan untuk mendapatkan karakter reservoar delta dan mendukung dalam pengambilan keputusan pengembangan lapangan.Pada lingkungan reservoar batupasir delta, karakter lingkungan pengendapan yang memiliki banyak variasi adalah sebuah tantangan dalam pengembangan lapangan. Kualitas dan distribusi reservoar batupasir tidak merata pada lingkungan delta. Dengan metode seismik inversi impedansi akustik dan seismik atribut tras komplek , penentuan karakter dari reservoar delta Formasi Tarakan telah berhasil dilakukan. Metode seismik atribut tras komplek dapat menentukan penyebaran batupasir Formasi Tarakan melalui perbedaan frekuensi sesaat. Seismik atribut fase sesaat dan inversi impedansi akustik mampu menggambarkan lingkungan pengendapan saat reservoar Formasi Tarakan diendapkan. Dengan interpretasi penyebaran batupasir dalam frekuensi sesaat dan rekonstruksi lingkungan pengendapan maka dapat ditentukan zona reservoar batupasir Formasi Tarakan yang memiliki kualitas baik dan zona non reservoar. Metode seismik atribut tras komplek dan inversi impedansi akustik dapat menentukan arah pengembangan lapangan KX dengan menggabungkan antara interpretasi geologi delta, interpretasi seismik atribut tras komplek dan inversi impedansi akustik. Dengan penentuan kualitas reservoar batupasir Formasi Tarakan yang memililki nilai 4300-5800 (m/s*g/cm3) dan porositas 20-30% diinterpretasikan sebagai reservoar gas yang layak dikembangkan. Nilai cadangan dari struktur DFY ini mencapai 156.21 BCF.

KX field in North Borneo Tarakan Basin has the potential to be developed as a gas field. Through the KX-1 well drilling, reservoir zones in the Field KX is a delta sandstone reservoir. This study aims to get the character of reservoir delta and support in decision making field development.In the delta sandstone reservoir environment, which has many variety of depositional enviromnent , is a challenge in the development field. The quality and distribution of reservoir sandstones is uneven in delta environment. With the method of seismic acoustic impedance inversion and complex trace seismic attribute, determining the character of reservoir delta of Tarakan Formation has been successfully carried out.The sandstone reservoir distribution of Tarakan Formation has been deliniated in lateral extent with acoustic impedance interpretation. Depostional environment of sandstone reservoir of Tarakan Formation has been reconstructed by interpretation of complex trace attributes.The integrated interpretation of the instantaneous frequency and the reconstruction of depositional environment can then be determined for sandstone reservoir Tarakan Formation zones that have good quality and separated non-reservoir zones.The direction of development in KX field has been carried out with the integrated interpretation of acoustic impedance inversion and complex trace attributes. Reservoir sandstones that have good quality range in 4300-5800 (m/s*g/cm3) and porosity 20-30%. The initial gas in place reserves are estimated worth 156.21 BCF. "
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2016
T46472
UI - Tesis Membership  Universitas Indonesia Library
cover
Stefanny Rizika Amina
"Karakterisasi reservoar hidrokarbon merupakan serangkaian proses yang meliputi interpretasi, analisis, serta evaluasi sebuah reservoar berdasarkan data geologi dan geofisika. Suatu reservoir hidrokarbon dapat diklasifikasikan sebagai suatu reservoar yang berkarakter ekonomis untuk eksplorasi dan produksi jika proses karakterisasi reservoir dilakukan dengan tepat secara kualitatif dan kuantitatif. Integrasi data geologi dan geofisika dapat bermanfaat bagi karakterisasi reservoar melalui pemanfaatan metode inversi seismik. Keberadaan hidrokarbon di Formasi Talang Akar, Cekungan Sumatra Selatan dianalisis menggunakan inversi seismik yang menggunakan data full-stack seismic secara model-based. Implementasi metode inversi model-based menggunakan properti seismik, yaitu impedansi akustik. Dengan mengintegrasi data sumur, dapat dihasilkan properti fisika batuan, seperti impedansi akustik gelombang-P (Zp) dan kecepatan gelombang-P (Vp). Pemanfaatan impedansi akustik dengan memperhatikan hasil analisis wavelet yang tepat untuk melaksanakan proses inversi dapat bermanfaat untuk melakukan prediksi litologi bawah permukaan penyusun reservoar hidrokarbon. Hasil inversi impedansi akustik dapat dielaborasikan untuk mendelineasi litologi sand dan shalesecara umum pada lingkungan pengendapan berupa delta-fluvial. Prediksi litologi melalui ketersediaan data Sumur BUDAPEST, CANNES, dan DEBRECEN pada reservoar pada studi penelitian ini berhasil memprediksi litologi berupa sand (Class 1) sebesar 40.89%, sand (Class 2) sebesar 38.08%, shale sebesar 37.20%, serta karbonat sebesar 53.34%.

Hydrocarbon reservoir characterization is a series of processes that include interpretation, analysis, and evaluation of a reservoir based on geological and geophysical data. A hydrocarbon reservoir can be classified as a reservoir with economical characteristics for exploration and production if the reservoir characterization process is carried out qualitatively and quantitatively. The integration of geological and geophysical data can be useful for reservoir characterization through the use of the seismic inversion method. The presence of hydrocarbons in the Talang Akar Formation, South Sumatra Basin was analyzed using seismic inversion which uses model-based, from full-stack seismic data. The implementation of the model-based inversion method uses acoustic impedance as the property. By integrating well data, rock physics properties can be generated, such as P-wave acoustic impedance (Zp) and P-wave velocity (Vp). Utilization of acoustic impedance by taking into account the results of the appropriate wavelet analysis to carry out the inversion process can be useful for predicting subsurface lithology making up hydrocarbon reservoirs. The results of acoustic impedance inversion can be elaborated to delineate sand and shale lithologies in general in delta-fluvial depositional environments. The lithology prediction through the availability of data on the BUDAPEST, CANNES, and DEBRECEN wells in the reservoir of research in this study succeeded in predicting lithology in the form of 40.89% sand (Class 1), 38.08% sand (Class 2), 37.20% shale, and 53.34% carbonate."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Christopher Evan Anggradi
"Formasi Balikpapan yang terletak pada lapangan KEVEV, Cekungan Kutai merupakan reservoir batupasir yang cukup baik sebagai tempat terakumulasinya hidrokarbon. Dalam penelitian ini, telah dilakukan inversi impedansi akustik AI pada seismik 3D untuk mengetahui karakteristik dari lapisan target pada formasi Balikpapan di Lapangan KEVEV, Cekungan Kutai, Kalimantan. Inversi impedansi akustik pada data seismik yang dilakukan berbasis model dimana pembuatan model dikontrol oleh 6 Sumur yang digunakan dan juga 1 Horizon.
Pada hasil inversi AI dilakukan slice untuk mendapatkan daerah low-Impedance yang berpotensi sebagai lapisan pasir sehingga dapat mengindikasikan adanya hidrokarbon pada lapangan "KEVEV" berdasarkan nilai impedansi akustik dan porositas. Dari proses inversi AI yang dilakukan pada data seismik 3D di Lapangan KEVEV diperoleh harga impedansi akustik untuk lapisan Horizon x adalah antara 20.000 ft/s g/cc-27.000 ft/s g/cc. Setelah dikonversikan menjadi porositas, didapatkan harga porositas untuk Horizon X sebesar 20-24 . Zona prospek hidrokarbon diindikasikan terdapat pada puncak dekat dengan sumur KEVEV 0060.Untuk sumur pengembangan berikutnya sebaiknya dilakukan di dekat titik tersebut.

Balikpapan formation, which is located in KEVEV field, Kutai Basin, is a quite good sandstone reservoir as a place where hydrocarbons are accumulated. In this study, Acoustic Impedance AI Inversion in 3D seismic, have been done to interpret characteristic of the target rsquo s layer in Horizon X, KEVEV field, Kutai Basin, Kalimantan. Acoustic impedance seismic inversion, which based on model controlled by 6 wells and 1 horizon.
The results of Al inversion sliced to get the low impedance area which are potential as a sand layer, so that the hydrocarbon can be indicated in KEVEV field, based on the value of acoustic impedance and porosity. The result of acoustic impedance inversion from 3D seismic data in KEVEV Field controlled by Horizon X is in range 20.000 ft s g cc - 27.000 ft s g cc. After being converted in to porosity, the value of porosity for Horizon X is obtained. The value is 20 - 24. Hydrocarbon prospect zone is indicated in the high structure, near to KEVEV 0060 well. The next develop well ought to be near that point.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
S67768
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ridwan
"Tujuan dilakukannya penelitian ini adalah untuk menentukan pola penyebaran karakterisasi reservoir yang berpotensi sebagai reservoar hidrokarbon. Lokasi penelitian dilapangan blackfoot berada pada Crosline 45. Lapangan Blackfoot ini merupakan lapangan gas dan minyak dengan reservoar merupakan karbonat yang berada pada kedalaman sekitar 1550 m yang didominasi lapisan glauchonit. Konsep inversi AI mengacu pada perubahan nilai setiap log dimana log yang digunakan : log P-wave, log density, log Gamma Ray, log Neoulron Porosity, log Resistivitas, log Checkshot, log P Impedance. sehingga parameter yang digunakan tersebut dapat mampu memberikan informasi tentang fluida yang memisahkan antara shale dan karbonat. Pada implementasinya data seismik post tack diolah untuk mendapatkan berbagai macam penampang yang digunakan sebagai input dalam proses inversi sehingga dapat diketahui karakterisasi reseryoar yang membedakan setiap sumur sehingga daerah prospek minyak dan gas nya dapat diketahui keberadaannya.

The purpose of this study was to determine the pattern of spread of a potential reservoir characterization as a hydrocarbon reservoir. Field research location Blackfoot is at Crosline 45. Field Blackfoot is an oil and gas field with a carbonate reservoir located at a depth of about 1550 m are dominated glauchonit layer. AI inversion concept refers to changes in the value of each log where the log is used: P-wave logs, log density, log Gamma Ray, Neoutron porosity logs, resistivity logs, log Checkshot, log P impedance. so that the parameters used may be able to give information about the fluid that separates between the shale and carbonate. In the implementation prestack seismic data is processed to obtain various kinds of cross-section used as input in the process of inversion that can be known reservoir characterization that distinguish each well so that oil and gas prospect area it can be known to exist.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2010
S29477
UI - Skripsi Open  Universitas Indonesia Library
cover
Reza Harunsyah Putra
"Kombinasi metode dekomposisi spektral Continous Wavelet Transfrom (CWT) dan inversi seismik telah dilakukan pada lapangan Blackfoot, Australia. Metode dekomposisi spektral digunakan untuk identifikasi estimasi nilai atenuasi pada data seismik sedangkan inversi seismik untuk mencari lapisan pasir yang diduga sebagai reservoar. Penggunaan kedua metode ini dapat memetakan dan mengkarakterisasi reservoar berdasarkan sumur 14-09 dan 16-08, dengan menggunakan data post stack seimik 3D.
Uji sensitivitas dapat memperlihatkan zona dan karakterisasi reservoar untuk memperlihatkan litologi (sand-shale). Berdasarkan data geologi, daerah interest terletak pada lapisan Glauconitic yang tergolong dalam Manville Group. Pada hasil horison slice top Glauconitic yang telah di inversi, maka didapatkan nilai impedansi akustik yang berkisar 7500-9000(ms)*(g/cc). Setelah itu, dilakukan spektral dekomposisi pada horizon top glauconitic dengan hasil frekuensi 19 hz yang dapat memvisualisasi reservoar.

Combination of Spectral Decomposition method Continous Wavelet Transform (CWT) and seismic inversion have been done on the Blackfoot Field, Australia. Spectral Decomposition method has been used to identification the estimated of attenuation value on seismic data while the acoustics impedance inversion to find sand layer which suspected as reservoir. The utilization both of these methods to map out and characterize the reservoir based on wells 14-09 and 16-08, with using post stack seismic data 3D.
Sensitivity test show the zone and reservoir characterization possible to show the lithology (sand-shale). Based on geological data, the interest zone lies in the Glauconitic layer belonging to the Manville Group. The results of horizon slice on top Glauconitic that have been in the inversion, the acoustics impedance values obtained ranged 7500-9000 (ms)*(g/cc). After that, the Spectral Decomposition on top Glauconitic with frequency of results 19 hz that can visualize the reservoir.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2013
S54400
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ivan Reeve Anwsy
"Skripsi ini memaparkan aplikasi metode inversi Akustik Impedans (AI) dan Dekomposisi Spektral pada data seismik di lapangan ?Upper? Norway. Tujuan dari aplikasi metode seismik inversi ini adalah untuk identifikasi reservoir batupasir yang memiliki ketebalan dibawah resolusi seismik. Metode inversi Model Based, digunakan untuk mendapatkan hasil analisis yang baik. Dilakukan teknik plot silang dari data sumur untuk mendapatkan persamaan antara nilai impedansi akustik dan nilai porositas, setelah itu dilakukan transformasi dari penampang impedansi akustik menjadi penampang porositas.
Hasil interpretasi peta distribusi inversi impedansi akustik akan menunjukkan zona kemungkinan reservoir. Kemungkinan adanya reservoir ditandai oleh porositas rendah dengan nilai impedansi akustik yang relatif tinggi. Dekomposisi spektral digunakan untuk melihat konten yang ada pada lapangan Upper dimana kemungkinan di lapangan tersebut adanya gas atau minyak. Kemungkinan tersebut dapat terlihat dari analisa pola respon frekuensi.

This thesis describes the application of acoustic impedance inversion method (AI) and Spectral Decomposition of the seismic data in the field "Upper" Norway. The purpose of this application is the method of seismic inversion for the identification of reservoir sandstones having a thickness below seismic resolution. Based Model inversion method, is used to obtain analytical results are good. Performed cross plot technique of well data to obtain similarities between acoustic impedance values and porosity values, after the transformation of the cross-section of the acoustic impedance into porosity cross section.
Results interpretation acoustic impedance inversion distribution map will show the possibility of the reservoir zone. The possibility of a reservoir characterized by low porosity with acoustic impedance values relatively high. Spectral Decomposition is used to view the content available on the Upper field where the possibilities in the field presence of gas or oil. The possibility can be seen from the analysis of the frequency response pattern.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2014
S56929
UI - Skripsi Membership  Universitas Indonesia Library
cover
Zumrotul Aliyah
"Cekungan Sumatera Selatan merupakan cekungan hidrokarbon terbesar di Indonesia dengan salah satu reservoarnya yang potensial berada di Formasi Baturaja dan Talangakar. Penelitian ini menggunakan metode multiatribut untuk memvalidasi hasil dari metode inversi impedansi akustik dengan lebih detail dalam memetakan zona reservoar di Lapangan “ZA”. Metode inversi impedansi akustik yang digunakan adalah model based. Sedangkan metode multiatribut yang digunakan adalah Probabilistic Neural Network (PNN) dengan parameter fisik volume shale dan porositas efektif. Hasil inversi impedansi akustik kurang memetakan zona reservoar dengan baik dikarenakan rentang yang terlalu lebar pada reservoar karbonat (35000-48000 ft/s.g/cc) dan masih terdapat overlapping pada nilai impedansi akustik batupasir (23000-26000 ft/s.g/cc). Hasil multiatribut secara konsisten menunjukkan persebaran limestone dengan rentang nilai volume shale < 10,75% dan porositas efektif 15,42-23,00 % (good-very good) serta persebaran batupasir dengan rentang nilai volume shale < 31,60 % dan porositas efektif 15,00-25,00 % (good-very good). Berdasarkan hasil analisis kedua metode, terdapat beberapa area potensial dengan porositas efektif dan seal yang baik yang dapat dikembangkan selanjutnya, yaitu persebaran limestone pada area tinggian sebelah barat laut (NW) untuk Formasi Baturaja dan persebaran batupasir pada area timur laut (NE) dan utara (N) untuk Formasi Talangakar.

South Sumatra Basin is the largest hydrocarbon basin in Indonesia with one of its potenstial reservoirs in Baturaja and Talangakar Formations. This study uses a multi-attribute method to validate the acoustic impedance inversion result in more detail for reservoir zone mapping in the “ZA” Field. The acoustic impedance inversion method used is model based. While the multi-attribute method used is Probabilistic Neural Network (PNN) and uses physical parameters of shale volume and effective porosity. The results of acoustic impedance inversion can not map the reservoir zone properly because of the wide range in the carbonate reservoir (35000-48000 ft/s.g/cc). The multi-attribute results consistently show limestone distribution with range of shale volume < 10,75% and effective porosity of 15,42-23,00 % (good-very good), also sandstone distribution with shale volume range < 31,60 % and effective porosity of 15,00-25,00 % (good-very good). Based on this analysis result, there are several potential areas that has good effective porosity and seals that can be further developed, namely the distribution of limestone in the northwestern high area (NW) for Baturaja Formation and the distribution of sandstone in the northeast (NE) and north (N) areas for Talangakar Formation."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Bastanta Kristian
"Penelitian mengenai karakterisasi reservoar pada daerah X, Cekungan Tarakan, ini dilakukan menggunakan inversi seismik impedansi akustik, multiatribut, dan Probabilistic Neural Network (PNN). Metode inversi seismik impedansi akustik pada penelitian ini bertujuan untuk mengetahui rentang impedansi akustik bawah permukaan pada daerah X. Dengan diketahuinya rentang dan persebaran impedansi akustik maka dapat diperkirakan litologi hingga porositas pada daerah X. Impedansi memiliki hubungan berbanding terbalik dengan porositas, nilai impedansi akustik rendah mengindikasikan nilai porositas tinggi. Hal ini terjadi karena impedansi akustik sangat dipengaruhi oleh kecepatan dan densitas. Sementara, multiatribut dan PNN dilakukan untuk mengekstrapolasi dari nilai log porositas dan volume clay yang dimiliki oleh ketiga sumur ke seluruh seismik sehingga dapat diketahui dugaan persebaran porositas dan permeabilitas pada daerah X. Dari pengolahan didapatkan hasil yang selaras satu sama lainnya, litologi diduga reservoar sandstone tersebar di wilayah tinggian dan dekat dengan adanya patahan. Sedangkan, secara lateral keberadaan reservoar sandstone berada pada tinggian dengan arah relatif Timur Laut (NE)-Barat Daya (SW). Hal ini terlihat melalui nilai impedansi akustik yang relatif rendah (kurang dari 6384 m/sg/cc atau 21000 ft/sg/cc), nilai porositas relatif tinggi (25%-40%), dan nilai volume clay relatif rendah (kurang dari 55%). Oleh karena itu, jebakan hidrokarbon pada daerah ini diduga merupakan jebakan struktur, selain itu terdapat juga zona yang memiliki potensi tinggi untuk dilakukan pengembangan.

This study focuses on characterizing reservoirs within Area X, located in the Tarakan Basin, employing seismic acoustic impedance inversion, multi-attribute analysis, and Probabilistic Neural Network (PNN). The seismic acoustic impedance inversion method aims to determine the subsurface acoustic impedance range in Area X. By discerning the range and distribution of acoustic impedance, it becomes possible to estimate lithology and porosity within Area X. Acoustic impedance exhibits an inverse relationship with porosity, where low acoustic impedance values indicate high porosity. This relationship arises due to the strong influence of velocity and density on acoustic impedance. Concurrently, multi-attribute analysis and PNN are employed to extrapolate porosity and clay volume values from three wells to the entire seismic dataset, allowing the estimation of porosity and permeability distribution probabilities within Area X. The processed results exhibit coherence, indicating that sandstone reservoir lithology is suspected to be scattered across elevated regions, often near fault zones. Moreover, laterally, the presence of sandstone reservoirs tends to align with elevations in a Northeast (NE) to Southwest (SW) direction. This is evident through relatively low acoustic impedance values (less than 6384 m/sg/cc or 21000 ft/sg/cc), relatively high porosity values (25%-40%), and relatively low volume clay values (less than 55%). Consequently, hydrocarbon trapping within this area is suspected to be structurally controlled. Additionally, certain zones exhibit high development potential."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>