Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 71506 dokumen yang sesuai dengan query
cover
Sjaiful Rijal
"Untuk memenuhi peningkatan kebutuhan atas jaringan komunikasi wireless, IEEE mengeluarkan standard 802.16 WiMax yang mampu memberikan layanan dengan jangkauan yang luas, data rate yang tinggi dan mobilitas pengguna. Namun, selain jangkauan dan kecepatan data, privasi dan keamanan juga merupakan kebutuhan yang harus diperhatikan dalam teknologi jaringan telekomunikasi. Diantaranya yaitu untuk menjaga kerahasiaan informasi pengguna dan mencegah penggunaan layanan tanpa hak. Dalam penulisan skripsi ini akan dibahas mengenai analisis prinsip kerja sistem keamanan pada Mobile WiMax tersebut.
Pada arsitektur protokol WiMax, sistem keamanan berada pada MAC layer, tepatnya pada security sublayer. Penulisan skripsi ini membahas proses authentikasi dan pemebentukan koneksi antara SS dengan BS, struktur MAC Protocol Data Unit serta beberapa teknik pengamanan. Dari pengujian, analisis dan program simulasi, sistem Mobile WiMax di PT. CSM menggunakan teknik pengamanan melalui pengenalan sertifikasi digigital X.509, autentikasi EAP-TTLS dan enkripsi AES-128.

In order to fulfill the requirement of wireless communication network, IEEE has released 802.16 standard (WiMax) that able to provide capacious range and high data rate. However, beside high bandwidth and wide-area access, privacy and security is the aspects that been concerned in the telecommunication network technology. The paper describes the analysis of security system principle in mobile WiMax.
WiMax protocol architecture describes security system at MAC Layer especially security sub layer. This paper describes authentication process and connection establish between SS and BS, MAC Protocol Data Unit Structure and some protection technique. Refer to the test, analysis and simulation program, WiMax System that used in PT. CSM using security system with digital certificate X.509 and EAP-TTLS authentication, and AES-128 encryption.
"
Depok: Fakultas Teknik Universitas Indonesia, 2008
R.03.08.144 Rij a
UI - Skripsi Open  Universitas Indonesia Library
cover
Sjaiful Rijal
"Untuk memenuhi peningkatan kebutuhan atas jaringan komunikasi wireless, IEEE mengeluarkan standard 802.16 WiMax yang mampu memberikan layanan dengan jangkauan yang luas, data rate yang tinggi dan mobilitas pengguna. Namun, selain jangkauan dan kecepatan data, privasi dan keamanan juga merupakan kebutuhan yang harus diperhatikan dalam teknologi jaringan telekomunikasi. Diantaranya yaitu untuk menjaga kerahasiaan informasi pengguna dan mencegah penggunaan layanan tanpa hak. Dalam penulisan skripsi ini akan dibahas mengenai analisis prinsip kerja sistem keamanan pada Mobile WiMax tersebut.
Pada arsitektur protokol WiMax, sistem keamanan berada pada MAC layer, tepatnya pada security sublayer. Penulisan skripsi ini membahas proses authentikasi dan pemebentukan koneksi antara SS dengan BS, struktur MAC Protocol Data Unit serta beberapa teknik pengamanan. Dari pengujian, analisis dan program simulasi, sistem Mobile WiMax di PT. CSM menggunakan teknik pengamanan melalui pengenalan sertifikasi digigital X.509, autentikasi EAP-TTLS dan enkripsi AES-128.

In order to fulfill the requirement of wireless communication network, IEEE has released 802.16 standard (WiMax) that able to provide capacious range and high data rate. However, beside high bandwidth and wide-area access, privacy and security is the aspects that been concerned in the telecommunication network technology. The paper describes the analysis of security system principle in mobile WiMax.
WiMax protocol architecture describes security system at MAC Layer especially security sub layer. This paper describes authentication process and connection establish between SS and BS, MAC Protocol Data Unit Structure and some protection technique. Refer to the test, analysis and simulation program, WiMax System that used in PT. CSM using security system with digital certificate X.509 and EAP-TTLS authentication, and AES-128 encryption.
"
Depok: Fakultas Teknik Universitas Indonesia, 2008
S51028
UI - Skripsi Open  Universitas Indonesia Library
cover
Rudiyanto
"Nilai Superframe Order Dan Beacon Order pada protokol IEEE 802.15.4 untuk menentukan besarnya paket data yang bisa ditransmisikan dalam setiap Superframe dan juga lamanya masa tidak aktif dalam setiap Superframe. Jaringan multihop mempunyai ketersedian bandwith yang bagus sehingga digunakan pada penelitian ini. Penelitian ini menggunakan simulasi NS2 untuk menganalisis pengaruh nilai Beacon Order dan nilai Superframe Order terhadap kinerja jaringan nirkabel multihop yang memiliki topologi pohon pada protokol IEEE 802.15.4. Kinerja jaringan telah dievaluasi secara rinci pada throughput rata-rata, delay rata-rata, delivery ratio dan persentase dari energi rata-rata yang digunakan terhadap variasi nilai Beacon Order dan nilai Superframe Order. Nilai Beacon Order dan nilai Superframe Order optimum yang diperoleh dari eksperimen adalah 9.

Superframe order value and beacon order value on IEEE 802.15.4 protocol determine the number of data packets that can be transmitted in each Superframe and also the length of the inactive period in each Superframe. Multihop networks with good bandwidth availability are used in this study. This study uses NS2 simulation to analyze the influence of the Beacon Order value and Superframe Order value to the performance of multihop wireless networks with a tree topology base on IEEE 802.15.4 protocol. The performance of the network which have been evaluated in detail are the average throughput, average delay, delivery ratio and the percentage of the average energy used towards the variation of the Beacon Order value and Superframe Order value. The optimum number of Beacon Order and Superframe Order found from the experiment is 9."
Depok: Fakultas Teknik Universitas Indonesia, 2012
T32528
UI - Tesis Membership  Universitas Indonesia Library
cover
Nichols, Randall K.
New York: McGraw-Hill , 2002
005.8 NIC w
Buku Teks  Universitas Indonesia Library
cover
"Many organisations are transforming their businesses through the development of information and communications technologies. The security of this e-commerce is now a key enabler for businesses and this book presents an overview of current and future infrastructures for e-business including XML security mechanisms and next generation Public Key Infrastructures (PKI), as well as digital archiving and wireless security which is set to be a huge growth area with the full rollout of 3G mobile networks. TETRA security, firewalls and Virtual Private Network (VPN) technologies are all discussed to provide business solutions for end-to-end secure networking. This book is essential reading for IT and security professionals as well managers involved in the implementation of e-businesses."
London: Institution of Engineering and Technology, 2002
e20451710
eBooks  Universitas Indonesia Library
cover
Sidabutar, Roland
"ISP (Internet Service Provider) diharapkan untuk mampu menawarkan layanan paket data melalui beberapa teknologi nirkabel (seperti: 3G, 802.11g, WiMAX). Seiring dengan perkembangan teknologi perangkat komunikasi sekarang ini, maka kebutuhan akan penggunaan jaringan teknologi 3G mengakibatkan penambahan jumlah traffic. Offloading jaringan seluler merupakan solusi yang cukup menjanjikan untuk digunakan sebagai alternatif layanan telekomunikasi karena tidak membutuhkan biaya yang relatif banyak untuk mengaplikasikannya, proses pembangunan infrastrukturnya cepat, dan dapat digunakan dalam semua sistem operasi perangkat mobile.
Proses offloading memerlukan suatu skema pengambilan keputusan perpindahan jaringan agar jumlah handover dapat dilakukan seminimal mungkin, mengingat bahwa pemancar setiap teknologi mempunyai paramter-parameter seperti mobilitas, bandwidth, daya yang dipancarkan, kekuatan sinyal, dan jumlah kapasitas pengguna. Dengan demikian, diperlukan suatu model pengambilan keputusan sebagai mekanisme dalam pemilihan teknologi guna untuk meningkatkan efektivitas proses offloading dan performance jaringan. Algoritma pengambilan keputusan yang berbasiskan bandwidth dapat melihat bagaimana proses perpindahan jaringan secara vertikal dan ada beberapa parameter yang menjadi pertimbangan, yaitu: nilai RSS, gangguan, daya pada sisi pemancar, bandwidth yang dibutuhkan aplikasi, dan bandwidth teknologi.

ISP (Internet Service Provider) is expected to be able to offer a packet data service through multiple wireless technologies (such as 3G, 802.11g, WiMAX). Along with the recent development of communication technology devices, the need for the use of 3G technology network resulted in increase in the number of traffic. Offloading mobile networks is a solution that is promising to be used as an alternative for telecommunications services, for cheaper resolution, rapid infrastructure development process, and able be applied in all mobile device operating system.
Offloading process requires as minimum as possible handover decision, since the transmitter has the a lot of parameters such as mobility, bandwidth, the radiated power, signal strength, and the number of user capacity. So, there should be a handover decision model as a mechanism in an election technology to improve the effectiveness of offloading process and network performance. Handover decision for vertical handover algorithm is based on bandwidth so it can show the process of handover. Parameters used as consideration of the algorithm is the value of RSS, interference, power of the transmitter, the required bandwidth, and bandwidth the wireless technologies.
"
Depok: Fakultas Teknik Universitas Indonesia, 2016
S63304
UI - Skripsi Membership  Universitas Indonesia Library
cover
Sri Chusri Haryanti
"Meningkatnya keberadaan, ketersediaan, kemampuan dan konektifitas perangkat bergerak telah menghasilkan paradigma baru dalam komunikasi bergerak. Salah satunya adalah implementasi fungsionalitas grid computing pada jaringan mobile ad hoc, yang dewasa ini dikenal dengan mobile ad hoc grid. Mobile ad hoc grid memungkinkan node dalam jaringan mobile ad hoc berbagi sumber daya komputasi untuk menyelesaikan suatu masalah. Dibandingkan dengan sistem grid computing tradisional, pengaturan sumber daya komputasi mobile ad hoc grid lebih kompleks mengingat lingkungan jaringan mobile ad hoc lebih dinamis dan sangat rentan terhadap kegagalan (fault).
Penelitian ini bertujuan untuk mendapatkan pendekatan alokasi sumber daya pada mobile ad hoc grid yang memberikan keandalan (reliability) dan unjuk kerja yang tinggi dengan menerapkan metode fault prevention dan fault tolerance. Pemilihan node berdasarkan mobilitas relatif antara node sumber daya dengan node yang meminta bantuan diusulkan sebagai metode fault prevention. Replikasi tugas diusulkan sebagai metode fault tolerance. Penelitian ini merumuskan model analitikal keandalan untuk layanan sumber daya pada mobile ad hoc grid, yang diperoleh dengan menggunakan pendekatan hirarki. Model tersebut mempertimbangkan tugas dependen pada arsitektur mobile ad hoc grid terpusat.
Dalam penelitian ini juga diusulkan pengoptimalan keandalan pelaksanaan tugas dengan mencari kombinasi replikasi tugas menggunakan metode branch and bound. Pengoptimalan dilakukan mengingat jumlah sumber daya pada mobile ad hoc grid relatif terbatas. Metode branch and bound digunakan karena sederhana, efisien dan dapat menemukan solusi kombinasi tugas dalam waktu yang singkat.
Simulasi dengan NS2 menunjukkan bahwa pemilihan node sumber daya berdasarkan prediksi mobilitas dan replikasi tugas dapat mempercepat waktu penyelesaian tugas, memperkecil rata-rata end-to-end delay dan memperkecil presentase kegagalan tugas. Simulasi juga memperlihatkan bahwa replikasi tugas hanya tepat diterapkan pada lingkungan dengan mobilitas node yang relatif rendah (v ≤ 3 m/dt). Simulasi model analitikal keandalan alokasi sumber daya menggunakan Matlab menunjukkan bahwa replikasi tugas dapat meningkatkan keandalan dan kombinasi replikasi tugas yang berbeda akan menghasilkan tingkat keandalan yang berbeda. Simulasi pengoptimalan keandalan menggunakan metode branch and bound dengan Matlab menunjukkan bahwa perlu ada trade-off antara tingkat keandalan dengan waktu yang diperlukan dalam mendapatkan hasil kombinasi replikasi tugas.

The increasing availability, capability, and connectivity of mobile devices has resulted in new paradigms in mobile communication. One of such new paradigms is the implementation of Grid computing functionality in a mobile ad hoc network, what is nowadays known as mobile ad hoc Grid. In a mobile ad hoc Grid, mobile nodes can share computational resources for accomplishing a specific task. Compared to the traditional Grid computing system, the management of computing resources in mobile ad hoc Grid is more complex as the environment of mobile ad hoc network is more dynamic and very susceptible to fault.
The objective of this research is to find resource allocation approach that gives high reliability and performance by implementing fault prevention and fault tolerance methods. For fault prevention method, it is proposed to select certain nodes from all available nodes that are willing to share resources based on relative mobility between resources nodes and requesting node. In addition, it proposes to implement task replication as fault tolerance method.
This research also introduces analytical model of resource allocation service in mobile ad hoc Grid by applying hierarchical model, in which it considers dependent tasks in centralized mobile ad hoc Grid architecture. Furthermore, this research also proposes the optimization of task execution reliability by discovering task replication combination using branch and bound method. The optimization needs to be done considering that the number of resources in mobile ad hoc Grid is limited. The branch and bound method is proposed as it is simple and efficient as well as being able to find the solution of task combination within the limited time.
The NS2 simulation shows that the selection of resource nodes based on mobility prediction and task replication is able to accelerate task completion time, reduce the average of end-to-end delay, and reduce the percentage of unfinish tasks. The simulation also demonstrates that task replication is only suitable to be implemented in the environment with relatively low node mobility (v ≤ 3 m/dt). The simulation of analytical model for resource allocation reliability using Matlab exhibits that task replication is able to enhance resource allocation reliability, and different combination of task replication number will generate different reliability level. Moreover, the optimization simulation of reliability with branch and bound model using Matlab denotes that we need to make a trade-off between reliability level and the time required to obtain the result of task replication combination.
"
Depok: Fakultas Teknik Universitas Indonesia, 2014
D1948
UI - Disertasi Membership  Universitas Indonesia Library
cover
Elmansyah
"Bring Your Own Device (BYOD) merupakan sistem e-learning yang memanfaatkan perangkat teknologi berupa laptop, netbook, smartphone/handhelds, tablet yang dimiliki sendiri oleh mahasiswa maupun dosen dalam proses belajar mengajar melalui jaringan Internet. Penelitian ini mengembangkan dan menganalisa sistem kelas pengajaran Bring Your Own Device (BYOD) berbasis cloud computing pada teknologi mobile smartphone Android. Pengembangan sistem terdiri dari perancangan aplikasi perangkat lunak berbasis Android, cloud computing menggunakan eucalyptus dan membangun aplikasi berbasis Web menggunakan moodle.
Hasil penelitian didapatkan melalui tiga skenario pengujian yang diikuti oleh 31 responden. Pada pengujian fungsional didapatkan hasil bahwa setiap menu dan fitur yang terdapat pada aplikasi yang dirancang dapat berjalan dengan baik. Pada pengujian User Acceptance Test, 86% responden menyetujui sistem ini mudah digunakan.
Dari pengujian unjuk kerja sistem, didapatkan hasil bahwa peningkatan jumlah pengguna saat mengakses sistem kelas pengajaran BYOD tidak mempengaruhi kinerja sistem cloud computing namun mempengaruhi mesin virtual Web server. Peningkatan jumlah pengguna menyebabkan penurunan performa mesin virtual web server sebanyak 55% pada saat beban server tinggi. Saat pengguna berjumlah lima orang beban kinerja mesin virtual Web server adalah 36%. Saat pengguna berjumlah lima belas orang beban kinerja mesin virtual Web server adalah 42%. Saat pengguna berjumlah tiga puluh satu orang beban kinerja mesin virtual Web server adalah 45%.

Bring Your Own Device (BYOD) refers to e-learning system technology devices, such as laptop, netbook, smartphone/handhelds, tablet which is utilizes by students or teachers for the purpose of learning through the Internet. This research developing and analysis of Bring Your Own Device (BYOD) teaching class system based on cloud computing using smartphone technology. This development system consist of software application design based on Android smartphone, cloud computing using Eucalyptus and Web based application using Moodle.
The results obtained through three scenarios of evaluation which is followed by 31 of respondents. Functional evaluation indicates that menu and fitures in applications is running well. User Acceptance Test evaluation shows that 86% of respondents stated that this application is easy to use.
Performance evaluation indicates that increase of users when accessing BYOD teaching class system was not affecting cloud computing performance. However it was affecting the performance of virtual machine Web server. An increase of users causes of virtual machine web server performance decrease of 55% on high load conditions. With five users, the load server is 36 %. With fifteen users, the load of server is 42 %. With thirty one users, the load server is 45 %.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
T32609
UI - Tesis Membership  Universitas Indonesia Library
cover
"Contents :
- Table of contents by author
- Network security
- Wireless security
- Service-provider and enterprise business issues
- Authentication and encryption
- Regulation, standards, and protocols
- Acronym guide "
Chicago: International Engineering Consortium, 2004
e20442515
eBooks  Universitas Indonesia Library
cover
Yudi Yanuar
"Perkembangan teknologi akses nirkabel berkembang secara pesat untuk memenuhi tuntutan pengguna yang membutuhkan komunikasi dengan kecepatan tinggi, kapasitas besar (broadband) dan mobilitas yang tinggi. Salah satu teknologi yang dihasilkan adalah WiMAX (Worldwide interoperability for Microwave Access) yang berdasarkan standar IEEE 802.16. Di Indonesia sistem komunikasi mobile WiMAX ini bekerja pada spektrum frekuensi 2. 3 GHz sesuai dengan keputusan Menteri Komunikasi dan Informasi Republik Indonesia.
Untuk mengantisipasi perkembangan trend WiMAX di Indonesia, kami mencoba untuk melakukan riset yang fokus pada perangkat RF (Radio Frequency) yaitu mixerfilter dengan menggunakan teknologi RF-MEMS yang naik daun sejak akhir abad 20. MEMS mixer-filter terdiri atas dua buah clamped resonator yang masingmasing mempunyai frekuensi center dan terhubung dengan sebuah batang (bar). Resonator pertama berfungsi sebagai mixer dan kedua sebagai filter, dimana mempunyai selective low-loss filtering yang tinggi. Kedua resonator dan coupling bar dirancang dengan menggunakan dua buah material yang bertumpuk, yaitu polysilicon dan zinc oxide untuk mendapatkan frekuensi yang tinggi. Mixer-filter ini dapat mengkonversikan frekuensi RF (Radio Frequency) 2,3 GHz dan frekuensi LO (Local Oscillator) sebesar 2,2 GHz menjadi frekuensi IF (Intermediate Frequency) sebesar 99,69 MHz yang mempunyai bandwidth 4,3 MHz.

The development of wireless access technology has rapidly evolved to meet the demands of users who require high-speed communications, large capacity (broadband) and high mobility. One of the resulting technology is WiMAX (Worldwide interoperability for Microwave Access) is based on the IEEE 802.16 standard. In Indonesia, the WiMAX mobile communication system is working on 2.3 GHz frequency spectrum. In accordance with the decision of the Minister of Communications and Information - Republic of Indonesia.
To anticipate the trend growth of WiMAX in Indonesia, we are trying to do research that focuses on the device RF (radio frequency) i.e. a mixer-filter using RF-MEMS technology that has been booming since last 20th century. Mixer-filter MEMS consists of two clamped resonator each have a center frequency and is connected to a rod (bar). The first resonator functions as a mixer and the second as a filter, which has a selective filtering of low-loss high. Both resonator and coupling bar designed by using two overlapping material, i.e poly-silicon, and zinc oxide to obtain high IF (intermediate frequency). Mixer-filter can down-convert the RF frequency of 2.3 GHz and LO frequency of 2.2 GHz to IF frequency of 99.69 MHz which has a bandwidth of 4.3 MHz.
"
Depok: Fakultas Teknik Universitas Indonesia, 2010
T27875
UI - Tesis Open  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>