Kerusakan perkerasan jalan yang terjadi di zaman ini, menimbulkan limbah aspal yang dapat digunakan menjadi Reclaimed Asphalt Pavement (RAP). Selain itu, penggunaan plastik yang masif di masa kini menyebabkan limbah plastik yang sulit terurai menjadi menumpuk, hal ini menjadi alasan yang kuat untuk mengupayakan plastik didaur ulang. Limbah kerusakan aspal yang dapat digunakan menjadi Reclaimed Asphalt Pavement (RAP) dan dorongan kegiatan daur ulang limbah plastik menimbulkan pertanyaan apakah limbah aspal dan juga limbah plastik dapat digunakan menjadi modifikasi aspal yang lebih baik. Oleh karena itu, tujuan dari penelitian ini adalah untuk melihat hasil modifikasi aspal dari perbandingan nilai resilient modulus dan total recovered strain pada campuran daur ulang aspal (RAP) dengan ditambahkannya plastik Low Density Polyethylene (LDPE). Dari hasil pengujian Indirect Tensile Strength (ITS) didapatkan pengaruh plastik LDPE adalah tidak meningkatkan nilai resilient modulus, tetapi hanya meningkatkan nilai Indeks Kekuatan Sisa (IKS), dan nilai total recovered strain selalu berbanding terbalik dengan nilai resilient modulus.
Road pavement damage that occurs in this era, creates asphalt waste that can be used as Reclaimed Asphalt Pavement (RAP). Beside that, the massive use of plastic today will cause plastic waste that is difficult to decompose to accumulate, this is a strong reason to seek plastic recycling. Asphalt damage waste that can be used as Recclaimed Asphalt Pavement (RAP) and the encouragement of plastic waste recycling activities raises the question of whether asphalt waste and also plastic waste can be used to make better asphalt modifications. Therefore, the purpose of this study was to examine the results of asphalt modification from the comparison of the resilient modulus and total recovered strain values of the pure asphalt mixture pen 60/70 with the recycled asphalt mixture (RAP) with the addition of Low Density Polyethylene plastic (LDPE). From the results of the Indirect Tensile Strength test (ITS), it was found that the effect of LDPE plastic is not increasing the resilient modulus value, but only increasing the Residual Strength Index (IKS) value, and the total recovered strain value is always inversely proportional to the resilient modulus value.